! Started logfile: J0939-1731_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:23:34 2017 obs J0939-1731_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0939-1731_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.679725 visibilities/baseline/integration-bin. ! Found source: J0939-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 11452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0939-1731_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952642Jy sigma=0.010472 ! Fit after self-cal, rms=0.899105Jy sigma=0.009916 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=5.771 mas, bpa=-2.654 degrees ! Estimated noise=1004.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746038 Jy ! Component: 100 - total flux cleaned = 0.0944368 Jy ! Total flux subtracted in 100 components = 0.0944368 Jy ! Clean residual min=-0.006410 max=0.009138 Jy/beam ! Clean residual mean=-0.000015 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 0.0944368 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0944368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104073Jy sigma=0.000950 ! Fit after self-cal, rms=0.104079Jy sigma=0.000950 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=6.879 mas, bpa=-1.976 degrees ! Estimated noise=621.657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161592 Jy ! Component: 100 - total flux cleaned = 0.0234183 Jy ! Component: 150 - total flux cleaned = 0.0270939 Jy ! Component: 200 - total flux cleaned = 0.0290896 Jy ! Total flux subtracted in 200 components = 0.0290896 Jy ! Clean residual min=-0.005473 max=0.006730 Jy/beam ! Clean residual mean=0.000001 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.123526 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.123526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101266Jy sigma=0.000925 ! Fit after self-cal, rms=0.101300Jy sigma=0.000924 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.85 KP 1.00* LA 1.10 ! MK 1.01 NL 1.07 OV 0.94 PT 1.11 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.05 KP 1.00* LA 1.05 ! MK 0.98 NL 1.16 OV 1.03 PT 1.00 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 1.19 KP 1.00* LA 0.86 ! MK 1.04 NL 1.08 OV 0.97 PT 0.96 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 KP 1.00* LA 0.95 ! MK 1.01 NL 1.22 OV 1.04 PT 1.03 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.101300Jy sigma=0.000924 ! Fit after self-cal, rms=0.091330Jy sigma=0.000905 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=6.828 mas, bpa=-1.609 degrees ! Estimated noise=624.856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512693 Jy ! Component: 100 - total flux cleaned = 0.0075297 Jy ! Component: 150 - total flux cleaned = 0.00915584 Jy ! Component: 200 - total flux cleaned = 0.0103362 Jy ! Total flux subtracted in 200 components = 0.0103362 Jy ! Clean residual min=-0.002510 max=0.002719 Jy/beam ! Clean residual mean=0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.133863 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 52 components and 0.133863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091046Jy sigma=0.000902 ! Fit after self-cal, rms=0.091203Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091203Jy sigma=0.000900 ! Fit after self-cal, rms=0.090669Jy sigma=0.000899 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=6.828 mas, bpa=-1.484 degrees ! Estimated noise=625.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171438 Jy ! Component: 100 - total flux cleaned = 0.00282917 Jy ! Component: 150 - total flux cleaned = 0.00325149 Jy ! Component: 200 - total flux cleaned = 0.0036128 Jy ! Total flux subtracted in 200 components = 0.0036128 Jy ! Clean residual min=-0.002349 max=0.002161 Jy/beam ! Clean residual mean=0.000005 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.137475 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 67 components and 0.137475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090621Jy sigma=0.000899 ! Fit after self-cal, rms=0.090664Jy sigma=0.000898 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698337 Jy ! Component: 100 - total flux cleaned = 0.000859446 Jy ! Component: 150 - total flux cleaned = 0.000978595 Jy ! Component: 200 - total flux cleaned = 0.00102279 Jy ! Total flux subtracted in 200 components = 0.00102279 Jy ! Clean residual min=-0.002333 max=0.002032 Jy/beam ! Clean residual mean=0.000006 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.138498 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 80 components and 0.138498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090647Jy sigma=0.000898 ! Fit after self-cal, rms=0.090652Jy sigma=0.000898 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090652Jy sigma=0.000898 ! Fit after self-cal, rms=0.090815Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=6.81 mas, bpa=-1.456 degrees ! Estimated noise=627.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101108 Jy ! Component: 100 - total flux cleaned = 0.00150091 Jy ! Component: 150 - total flux cleaned = 0.00168253 Jy ! Component: 200 - total flux cleaned = 0.00178509 Jy ! Total flux subtracted in 200 components = 0.00178509 Jy ! Clean residual min=-0.002346 max=0.001994 Jy/beam ! Clean residual mean=0.000006 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.140283 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 92 components and 0.140283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090792Jy sigma=0.000898 ! Fit after self-cal, rms=0.090798Jy sigma=0.000898 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200422 Jy ! Component: 100 - total flux cleaned = 0.000258213 Jy ! Component: 150 - total flux cleaned = 0.000313225 Jy ! Component: 200 - total flux cleaned = 0.000364895 Jy ! Total flux subtracted in 200 components = 0.000364895 Jy ! Clean residual min=-0.002331 max=0.001959 Jy/beam ! Clean residual mean=0.000007 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.140648 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.140648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090790Jy sigma=0.000898 ! Fit after self-cal, rms=0.090791Jy sigma=0.000898 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090791Jy sigma=0.000898 ! Fit after self-cal, rms=0.091043Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.748 mas, bmaj=15.53 mas, bpa=7.233 degrees ! Estimated noise=806.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150338 Jy ! Component: 100 - total flux cleaned = 0.00226844 Jy ! Component: 150 - total flux cleaned = 0.00257076 Jy ! Component: 200 - total flux cleaned = 0.0026404 Jy ! Total flux subtracted in 200 components = 0.0026404 Jy ! Clean residual min=-0.002086 max=0.002240 Jy/beam ! Clean residual mean=0.000015 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.143289 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 0.143289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091028Jy sigma=0.000898 ! Fit after self-cal, rms=0.091030Jy sigma=0.000898 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327195 Jy ! Component: 100 - total flux cleaned = 0.000326471 Jy ! Component: 150 - total flux cleaned = 0.000325473 Jy ! Component: 200 - total flux cleaned = 0.000324542 Jy ! Total flux subtracted in 200 components = 0.000324542 Jy ! Clean residual min=-0.002095 max=0.002227 Jy/beam ! Clean residual mean=0.000016 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.143613 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 111 components and 0.143613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091031Jy sigma=0.000898 ! Fit after self-cal, rms=0.091034Jy sigma=0.000898 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=6.793 mas, bpa=-1.438 degrees ! Estimated noise=630.183 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 6.793 at -1.438 degrees (North through East) ! Clean map min=-0.0020809 max=0.10294 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.354 mas, bmaj=5.713 mas, bpa=-2.248 degrees ! Estimated noise=1018.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0753381 Jy ! Component: 100 - total flux cleaned = 0.09655 Jy ! Component: 150 - total flux cleaned = 0.107447 Jy ! Component: 200 - total flux cleaned = 0.114141 Jy ! Total flux subtracted in 200 components = 0.114141 Jy ! Clean residual min=-0.004276 max=0.005297 Jy/beam ! Clean residual mean=-0.000006 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.114141 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.114141 Jy ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=6.793 mas, bpa=-1.438 degrees ! Estimated noise=630.183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874639 Jy ! Component: 100 - total flux cleaned = 0.0140804 Jy ! Component: 150 - total flux cleaned = 0.0177891 Jy ! Component: 200 - total flux cleaned = 0.0204767 Jy ! Total flux subtracted in 200 components = 0.0204767 Jy ! Clean residual min=-0.002831 max=0.002477 Jy/beam ! Clean residual mean=0.000001 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.134618 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 62 components and 0.134618 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.748 mas, bmaj=15.53 mas, bpa=7.233 degrees ! Estimated noise=806.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337664 Jy ! Component: 100 - total flux cleaned = 0.00536711 Jy ! Component: 150 - total flux cleaned = 0.00659542 Jy ! Component: 200 - total flux cleaned = 0.0074057 Jy ! Total flux subtracted in 200 components = 0.0074057 Jy ! Clean residual min=-0.002133 max=0.002186 Jy/beam ! Clean residual mean=0.000014 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.142023 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049819 Jy ! Component: 100 - total flux cleaned = 0.000640585 Jy ! Component: 150 - total flux cleaned = 0.000671722 Jy ! Component: 200 - total flux cleaned = 0.000671525 Jy ! Total flux subtracted in 200 components = 0.000671525 Jy ! Clean residual min=-0.002116 max=0.002151 Jy/beam ! Clean residual mean=0.000015 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.142695 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 115 components and 0.142695 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=6.793 mas, bpa=-1.438 degrees ! Estimated noise=630.183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.86871e-06 Jy ! Component: 100 - total flux cleaned = -2.77722e-05 Jy ! Component: 150 - total flux cleaned = -6.07042e-05 Jy ! Component: 200 - total flux cleaned = -5.9996e-05 Jy ! Total flux subtracted in 200 components = -5.9996e-05 Jy ! Clean residual min=-0.002160 max=0.002085 Jy/beam ! Clean residual mean=0.000007 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.142635 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 0.142635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091039Jy sigma=0.000898 ! Fit after self-cal, rms=0.091030Jy sigma=0.000898 wmodel J0939-1731_S_2014_01_04_pus_map.mod ! Writing 131 model components to file: J0939-1731_S_2014_01_04_pus_map.mod wobs J0939-1731_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0939-1731_S_2014_01_04_pus_uvs.fits wwins J0939-1731_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0939-1731_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000710409 Jy ! Component: 100 - total flux cleaned = -0.00138008 Jy ! Component: 150 - total flux cleaned = -0.00194281 Jy ! Component: 200 - total flux cleaned = -0.0021958 Jy ! Component: 250 - total flux cleaned = -0.00231667 Jy ! Component: 300 - total flux cleaned = -0.00249054 Jy ! Component: 350 - total flux cleaned = -0.00268616 Jy ! Component: 400 - total flux cleaned = -0.00282159 Jy ! Component: 450 - total flux cleaned = -0.00295317 Jy ! Component: 500 - total flux cleaned = -0.00302983 Jy ! Component: 550 - total flux cleaned = -0.00300538 Jy ! Component: 600 - total flux cleaned = -0.00305408 Jy ! Component: 650 - total flux cleaned = -0.00307749 Jy ! Component: 700 - total flux cleaned = -0.0030773 Jy ! Component: 750 - total flux cleaned = -0.00303212 Jy ! Component: 800 - total flux cleaned = -0.00298781 Jy ! Component: 850 - total flux cleaned = -0.0029231 Jy ! Component: 900 - total flux cleaned = -0.00285968 Jy ! Component: 950 - total flux cleaned = -0.00283925 Jy ! Component: 1000 - total flux cleaned = -0.00281868 Jy ! Component: 1050 - total flux cleaned = -0.00281811 Jy ! Component: 1100 - total flux cleaned = -0.0027793 Jy ! Component: 1150 - total flux cleaned = -0.00281735 Jy ! Component: 1200 - total flux cleaned = -0.00274207 Jy ! Component: 1250 - total flux cleaned = -0.00270566 Jy ! Component: 1300 - total flux cleaned = -0.0026878 Jy ! Component: 1350 - total flux cleaned = -0.00263503 Jy ! Component: 1400 - total flux cleaned = -0.00261817 Jy ! Component: 1450 - total flux cleaned = -0.00256697 Jy ! Component: 1500 - total flux cleaned = -0.00253366 Jy ! Component: 1550 - total flux cleaned = -0.00255032 Jy ! Component: 1600 - total flux cleaned = -0.00253405 Jy ! Component: 1650 - total flux cleaned = -0.00253386 Jy ! Component: 1700 - total flux cleaned = -0.00247077 Jy ! Component: 1750 - total flux cleaned = -0.00245547 Jy ! Component: 1800 - total flux cleaned = -0.00234804 Jy ! Component: 1850 - total flux cleaned = -0.00228719 Jy ! Component: 1900 - total flux cleaned = -0.00221234 Jy ! Component: 1950 - total flux cleaned = -0.00216789 Jy ! Component: 2000 - total flux cleaned = -0.00200661 Jy ! Component: 2050 - total flux cleaned = -0.00196316 Jy ! Component: 2100 - total flux cleaned = -0.00184851 Jy ! Component: 2150 - total flux cleaned = -0.00176377 Jy ! Component: 2200 - total flux cleaned = -0.00172175 Jy ! Component: 2250 - total flux cleaned = -0.00163873 Jy ! Component: 2300 - total flux cleaned = -0.00157061 Jy ! Component: 2350 - total flux cleaned = -0.00148963 Jy ! Component: 2400 - total flux cleaned = -0.00148953 Jy ! Component: 2450 - total flux cleaned = -0.00146308 Jy ! Component: 2500 - total flux cleaned = -0.00141065 Jy ! Component: 2550 - total flux cleaned = -0.00138494 Jy ! Component: 2600 - total flux cleaned = -0.00139766 Jy ! Component: 2650 - total flux cleaned = -0.00135958 Jy ! Component: 2700 - total flux cleaned = -0.001372 Jy ! Component: 2750 - total flux cleaned = -0.00135957 Jy ! Component: 2800 - total flux cleaned = -0.00132252 Jy ! Component: 2850 - total flux cleaned = -0.00133481 Jy ! Component: 2900 - total flux cleaned = -0.00128635 Jy ! Component: 2950 - total flux cleaned = -0.00133461 Jy ! Component: 3000 - total flux cleaned = -0.00132266 Jy ! Component: 3050 - total flux cleaned = -0.00131063 Jy ! Component: 3100 - total flux cleaned = -0.00132231 Jy ! Component: 3150 - total flux cleaned = -0.00132203 Jy ! Component: 3200 - total flux cleaned = -0.00125296 Jy ! Component: 3250 - total flux cleaned = -0.00127591 Jy ! Component: 3300 - total flux cleaned = -0.00127604 Jy ! Component: 3350 - total flux cleaned = -0.0012649 Jy ! Component: 3400 - total flux cleaned = -0.00128724 Jy ! Component: 3450 - total flux cleaned = -0.00129814 Jy ! Component: 3500 - total flux cleaned = -0.00129801 Jy ! Component: 3550 - total flux cleaned = -0.00130892 Jy ! Component: 3600 - total flux cleaned = -0.00134135 Jy ! Component: 3650 - total flux cleaned = -0.00133059 Jy ! Component: 3700 - total flux cleaned = -0.00130923 Jy ! Component: 3750 - total flux cleaned = -0.0012881 Jy ! Component: 3800 - total flux cleaned = -0.00133009 Jy ! Component: 3850 - total flux cleaned = -0.00131962 Jy ! Component: 3900 - total flux cleaned = -0.00131959 Jy ! Component: 3950 - total flux cleaned = -0.00129906 Jy ! Component: 4000 - total flux cleaned = -0.00130934 Jy ! Component: 4050 - total flux cleaned = -0.00131943 Jy ! Total flux subtracted in 4096 components = -0.00131934 Jy ! Clean residual min=-0.000735 max=0.000598 Jy/beam ! Clean residual mean=0.000004 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.141316 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 394 components and 0.141316 Jy ![Exited script file: muppet] wmap "J0939-1731_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 6.793 at -1.438 degrees (North through East) ! Clean map min=-0.0012713 max=0.10334 Jy/beam ! Writing clean map to FITS file: J0939-1731_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173737 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.504379 0.504379 1.00876 2.01752 4.03503 8.07006 16.1401 32.2803 64.5605 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 6.793 at -1.438 degrees (North through East) ! Clean map min=-0.0012713 max=0.10334 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0939-1731_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:23:39 2017