! Started logfile: J0935-1939_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:23:24 2017 obs J0935-1939_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0935-1939_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J0935-1939 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 12348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0935-1939_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966711Jy sigma=0.011340 ! Fit after self-cal, rms=0.940026Jy sigma=0.011027 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.497 mas, bmaj=6.053 mas, bpa=-3.339 degrees ! Estimated noise=905.353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472617 Jy ! Component: 100 - total flux cleaned = 0.0600815 Jy ! Total flux subtracted in 100 components = 0.0600815 Jy ! Clean residual min=-0.004959 max=0.006744 Jy/beam ! Clean residual mean=-0.000028 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.0600815 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0600815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085151Jy sigma=0.000907 ! Fit after self-cal, rms=0.084921Jy sigma=0.000903 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=6.901 mas, bpa=-1.448 degrees ! Estimated noise=562.124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00909857 Jy ! Component: 100 - total flux cleaned = 0.0136635 Jy ! Component: 150 - total flux cleaned = 0.0161963 Jy ! Component: 200 - total flux cleaned = 0.0170359 Jy ! Total flux subtracted in 200 components = 0.0170359 Jy ! Clean residual min=-0.004254 max=0.005541 Jy/beam ! Clean residual mean=-0.000023 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.0771174 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.0771173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083964Jy sigma=0.000892 ! Fit after self-cal, rms=0.084074Jy sigma=0.000891 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 KP 1.00* LA 1.00 ! MK 1.00 NL 0.98 OV 0.98 PT 1.11 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 1.00* LA 0.98 ! MK 1.03 NL 1.09 OV 1.08 PT 1.04 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.27 KP 1.00* LA 0.78 ! MK 1.02 NL 1.04 OV 0.96 PT 1.02 ! SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.23 KP 1.00* LA 0.91 ! MK 1.05 NL 1.17 OV 1.06 PT 1.08 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.084074Jy sigma=0.000891 ! Fit after self-cal, rms=0.081890Jy sigma=0.000885 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=6.815 mas, bpa=-0.2645 degrees ! Estimated noise=558.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502878 Jy ! Component: 100 - total flux cleaned = 0.00725642 Jy ! Component: 150 - total flux cleaned = 0.00860002 Jy ! Component: 200 - total flux cleaned = 0.00898528 Jy ! Total flux subtracted in 200 components = 0.00898528 Jy ! Clean residual min=-0.002681 max=0.002938 Jy/beam ! Clean residual mean=-0.000011 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.0861026 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 46 components and 0.0861026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081594Jy sigma=0.000882 ! Fit after self-cal, rms=0.081965Jy sigma=0.000880 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081965Jy sigma=0.000880 ! Fit after self-cal, rms=0.082672Jy sigma=0.000877 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=6.795 mas, bpa=0.09631 degrees ! Estimated noise=558.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240285 Jy ! Component: 100 - total flux cleaned = 0.00297053 Jy ! Component: 150 - total flux cleaned = 0.00358527 Jy ! Component: 200 - total flux cleaned = 0.00388584 Jy ! Total flux subtracted in 200 components = 0.00388584 Jy ! Clean residual min=-0.002400 max=0.002386 Jy/beam ! Clean residual mean=-0.000010 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0899885 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 67 components and 0.0899885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082555Jy sigma=0.000876 ! Fit after self-cal, rms=0.082834Jy sigma=0.000875 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282026 Jy ! Component: 100 - total flux cleaned = 0.00355958 Jy ! Component: 150 - total flux cleaned = 0.0040417 Jy ! Component: 200 - total flux cleaned = 0.0043555 Jy ! Total flux subtracted in 200 components = 0.0043555 Jy ! Clean residual min=-0.002387 max=0.001946 Jy/beam ! Clean residual mean=-0.000006 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.094344 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 84 components and 0.094344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082704Jy sigma=0.000874 ! Fit after self-cal, rms=0.082762Jy sigma=0.000873 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082762Jy sigma=0.000873 ! Fit after self-cal, rms=0.084347Jy sigma=0.000873 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=6.799 mas, bpa=0.2819 degrees ! Estimated noise=560.504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208165 Jy ! Component: 100 - total flux cleaned = 0.00288996 Jy ! Component: 150 - total flux cleaned = 0.00326723 Jy ! Component: 200 - total flux cleaned = 0.00343061 Jy ! Total flux subtracted in 200 components = 0.00343061 Jy ! Clean residual min=-0.002145 max=0.002073 Jy/beam ! Clean residual mean=-0.000005 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0977746 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.0977746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084269Jy sigma=0.000872 ! Fit after self-cal, rms=0.084526Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040864 Jy ! Component: 100 - total flux cleaned = 0.000509735 Jy ! Component: 150 - total flux cleaned = 0.000593705 Jy ! Component: 200 - total flux cleaned = 0.000634345 Jy ! Total flux subtracted in 200 components = 0.000634345 Jy ! Clean residual min=-0.002234 max=0.001904 Jy/beam ! Clean residual mean=-0.000004 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0984089 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.0984089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084466Jy sigma=0.000871 ! Fit after self-cal, rms=0.084550Jy sigma=0.000871 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084550Jy sigma=0.000871 ! Fit after self-cal, rms=0.085872Jy sigma=0.000871 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.737 mas, bmaj=16.14 mas, bpa=9.659 degrees ! Estimated noise=703.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109754 Jy ! Component: 100 - total flux cleaned = 0.00162617 Jy ! Component: 150 - total flux cleaned = 0.0017403 Jy ! Component: 200 - total flux cleaned = 0.00182561 Jy ! Total flux subtracted in 200 components = 0.00182561 Jy ! Clean residual min=-0.002265 max=0.002044 Jy/beam ! Clean residual mean=-0.000010 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.100235 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.100235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085860Jy sigma=0.000871 ! Fit after self-cal, rms=0.085985Jy sigma=0.000871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412264 Jy ! Component: 100 - total flux cleaned = 0.000462114 Jy ! Component: 150 - total flux cleaned = 0.000476451 Jy ! Component: 200 - total flux cleaned = 0.000490294 Jy ! Total flux subtracted in 200 components = 0.000490294 Jy ! Clean residual min=-0.002212 max=0.002034 Jy/beam ! Clean residual mean=-0.000009 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.100725 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 135 components and 0.100725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085975Jy sigma=0.000871 ! Fit after self-cal, rms=0.085982Jy sigma=0.000871 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=6.805 mas, bpa=0.37 degrees ! Estimated noise=562.235 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.999 x 6.805 at 0.37 degrees (North through East) ! Clean map min=-0.0024653 max=0.058451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.497 mas, bmaj=5.923 mas, bpa=-1.76 degrees ! Estimated noise=911.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456752 Jy ! Component: 100 - total flux cleaned = 0.0616346 Jy ! Component: 150 - total flux cleaned = 0.0710107 Jy ! Component: 200 - total flux cleaned = 0.0770265 Jy ! Total flux subtracted in 200 components = 0.0770265 Jy ! Clean residual min=-0.004921 max=0.004871 Jy/beam ! Clean residual mean=-0.000021 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.0770265 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0770265 Jy ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=6.805 mas, bpa=0.37 degrees ! Estimated noise=562.235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00696794 Jy ! Component: 100 - total flux cleaned = 0.0114781 Jy ! Component: 150 - total flux cleaned = 0.0149601 Jy ! Component: 200 - total flux cleaned = 0.0169042 Jy ! Total flux subtracted in 200 components = 0.0169042 Jy ! Clean residual min=-0.003101 max=0.002456 Jy/beam ! Clean residual mean=-0.000012 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0939307 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 41 components and 0.0939307 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.737 mas, bmaj=16.14 mas, bpa=9.659 degrees ! Estimated noise=703.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025497 Jy ! Component: 100 - total flux cleaned = 0.00401326 Jy ! Component: 150 - total flux cleaned = 0.00502134 Jy ! Component: 200 - total flux cleaned = 0.00577463 Jy ! Total flux subtracted in 200 components = 0.00577463 Jy ! Clean residual min=-0.002182 max=0.002125 Jy/beam ! Clean residual mean=-0.000011 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0997053 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363771 Jy ! Component: 100 - total flux cleaned = 0.000586462 Jy ! Component: 150 - total flux cleaned = 0.000711536 Jy ! Component: 200 - total flux cleaned = 0.000809463 Jy ! Total flux subtracted in 200 components = 0.000809463 Jy ! Clean residual min=-0.002138 max=0.002070 Jy/beam ! Clean residual mean=-0.000009 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.100515 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 104 components and 0.100515 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=6.805 mas, bpa=0.37 degrees ! Estimated noise=562.235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000756146 Jy ! Component: 100 - total flux cleaned = -0.000553924 Jy ! Component: 150 - total flux cleaned = -0.0002559 Jy ! Component: 200 - total flux cleaned = -0.000100606 Jy ! Total flux subtracted in 200 components = -0.000100606 Jy ! Clean residual min=-0.002137 max=0.002125 Jy/beam ! Clean residual mean=-0.000004 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.100414 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.100414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085971Jy sigma=0.000871 ! Fit after self-cal, rms=0.085980Jy sigma=0.000871 wmodel J0935-1939_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J0935-1939_S_2014_01_04_pus_map.mod wobs J0935-1939_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0935-1939_S_2014_01_04_pus_uvs.fits wwins J0935-1939_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0935-1939_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017003 Jy ! Component: 100 - total flux cleaned = -0.00034417 Jy ! Component: 150 - total flux cleaned = -0.000440832 Jy ! Component: 200 - total flux cleaned = -0.000441398 Jy ! Component: 250 - total flux cleaned = -0.000442693 Jy ! Component: 300 - total flux cleaned = -0.000416373 Jy ! Component: 350 - total flux cleaned = -0.000493213 Jy ! Component: 400 - total flux cleaned = -0.000518387 Jy ! Component: 450 - total flux cleaned = -0.000590175 Jy ! Component: 500 - total flux cleaned = -0.000705573 Jy ! Component: 550 - total flux cleaned = -0.000727535 Jy ! Component: 600 - total flux cleaned = -0.000749322 Jy ! Component: 650 - total flux cleaned = -0.000749261 Jy ! Component: 700 - total flux cleaned = -0.000728922 Jy ! Component: 750 - total flux cleaned = -0.000708485 Jy ! Component: 800 - total flux cleaned = -0.000648724 Jy ! Component: 850 - total flux cleaned = -0.000551209 Jy ! Component: 900 - total flux cleaned = -0.000437288 Jy ! Component: 950 - total flux cleaned = -0.000326215 Jy ! Component: 1000 - total flux cleaned = -0.000289784 Jy ! Component: 1050 - total flux cleaned = -0.000200235 Jy ! Component: 1100 - total flux cleaned = -7.75808e-05 Jy ! Component: 1150 - total flux cleaned = -8.56736e-06 Jy ! Component: 1200 - total flux cleaned = 9.26532e-05 Jy ! Component: 1250 - total flux cleaned = 0.000142438 Jy ! Component: 1300 - total flux cleaned = 0.000207721 Jy ! Component: 1350 - total flux cleaned = 0.000255591 Jy ! Component: 1400 - total flux cleaned = 0.00033407 Jy ! Component: 1450 - total flux cleaned = 0.000442445 Jy ! Component: 1500 - total flux cleaned = 0.000518509 Jy ! Component: 1550 - total flux cleaned = 0.000578424 Jy ! Component: 1600 - total flux cleaned = 0.000608267 Jy ! Component: 1650 - total flux cleaned = 0.000667018 Jy ! Component: 1700 - total flux cleaned = 0.000767674 Jy ! Component: 1750 - total flux cleaned = 0.000810087 Jy ! Component: 1800 - total flux cleaned = 0.000838006 Jy ! Component: 1850 - total flux cleaned = 0.000907004 Jy ! Component: 1900 - total flux cleaned = 0.000893303 Jy ! Component: 1950 - total flux cleaned = 0.000973899 Jy ! Component: 2000 - total flux cleaned = 0.000934053 Jy ! Component: 2050 - total flux cleaned = 0.000999813 Jy ! Component: 2100 - total flux cleaned = 0.00101275 Jy ! Component: 2150 - total flux cleaned = 0.00105089 Jy ! Component: 2200 - total flux cleaned = 0.00110136 Jy ! Component: 2250 - total flux cleaned = 0.00113854 Jy ! Component: 2300 - total flux cleaned = 0.00116319 Jy ! Component: 2350 - total flux cleaned = 0.00121211 Jy ! Component: 2400 - total flux cleaned = 0.00127273 Jy ! Component: 2450 - total flux cleaned = 0.00130874 Jy ! Component: 2500 - total flux cleaned = 0.00133262 Jy ! Component: 2550 - total flux cleaned = 0.00140306 Jy ! Component: 2600 - total flux cleaned = 0.0014496 Jy ! Component: 2650 - total flux cleaned = 0.00148416 Jy ! Component: 2700 - total flux cleaned = 0.00151854 Jy ! Component: 2750 - total flux cleaned = 0.00156383 Jy ! Component: 2800 - total flux cleaned = 0.00160866 Jy ! Component: 2850 - total flux cleaned = 0.00163092 Jy ! Component: 2900 - total flux cleaned = 0.0016862 Jy ! Component: 2950 - total flux cleaned = 0.00169717 Jy ! Component: 3000 - total flux cleaned = 0.00175166 Jy ! Component: 3050 - total flux cleaned = 0.00176251 Jy ! Component: 3100 - total flux cleaned = 0.00181594 Jy ! Component: 3150 - total flux cleaned = 0.00183715 Jy ! Component: 3200 - total flux cleaned = 0.00188984 Jy ! Component: 3250 - total flux cleaned = 0.00193154 Jy ! Component: 3300 - total flux cleaned = 0.00195225 Jy ! Component: 3350 - total flux cleaned = 0.00201398 Jy ! Component: 3400 - total flux cleaned = 0.00201402 Jy ! Component: 3450 - total flux cleaned = 0.0020648 Jy ! Component: 3500 - total flux cleaned = 0.00211508 Jy ! Component: 3550 - total flux cleaned = 0.00215491 Jy ! Component: 3600 - total flux cleaned = 0.00217473 Jy ! Component: 3650 - total flux cleaned = 0.00219436 Jy ! Component: 3700 - total flux cleaned = 0.00221405 Jy ! Component: 3750 - total flux cleaned = 0.00227221 Jy ! Component: 3800 - total flux cleaned = 0.0023011 Jy ! Component: 3850 - total flux cleaned = 0.00231071 Jy ! Component: 3900 - total flux cleaned = 0.00232968 Jy ! Component: 3950 - total flux cleaned = 0.00235793 Jy ! Component: 4000 - total flux cleaned = 0.00238602 Jy ! Component: 4050 - total flux cleaned = 0.0024045 Jy ! Total flux subtracted in 4096 components = 0.00240445 Jy ! Clean residual min=-0.000702 max=0.000532 Jy/beam ! Clean residual mean=0.000001 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.102819 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 393 components and 0.102819 Jy ![Exited script file: muppet] wmap "J0935-1939_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.999 x 6.805 at 0.37 degrees (North through East) ! Clean map min=-0.0015093 max=0.057485 Jy/beam ! Writing clean map to FITS file: J0935-1939_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0574848 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160146 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.835764 0.835764 1.67153 3.34306 6.68611 13.3722 26.7445 53.4889 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.999 x 6.805 at 0.37 degrees (North through East) ! Clean map min=-0.0015093 max=0.057485 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0935-1939_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:23:29 2017