! Started logfile: J0934+3926_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:23:19 2017 obs J0934+3926_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0934+3926_S_2014_01_04_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J0934+3926 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 11368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0934+3926_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938827Jy sigma=0.013231 ! Fit after self-cal, rms=0.924085Jy sigma=0.013084 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=3.785 mas, bpa=67.3 degrees ! Estimated noise=913.545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0597954 Jy ! Component: 100 - total flux cleaned = 0.0745317 Jy ! Total flux subtracted in 100 components = 0.0745317 Jy ! Clean residual min=-0.003941 max=0.005419 Jy/beam ! Clean residual mean=-0.000002 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.0745317 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0745317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076950Jy sigma=0.000895 ! Fit after self-cal, rms=0.076924Jy sigma=0.000894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.692 mas, bmaj=4.78 mas, bpa=-55.9 degrees ! Estimated noise=499.566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642442 Jy ! Component: 100 - total flux cleaned = 0.00872517 Jy ! Component: 150 - total flux cleaned = 0.00980769 Jy ! Component: 200 - total flux cleaned = 0.010376 Jy ! Total flux subtracted in 200 components = 0.010376 Jy ! Clean residual min=-0.002891 max=0.002710 Jy/beam ! Clean residual mean=-0.000007 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0849077 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.0849077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076403Jy sigma=0.000888 ! Fit after self-cal, rms=0.076377Jy sigma=0.000888 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.82 KP 1.00* LA 1.03 ! MK 0.93 NL 0.98 OV 0.98 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 KP 1.00* LA 1.00 ! MK 1.00 NL 1.05 OV 1.01 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.18 KP 1.00* LA 0.82 ! MK 1.04 NL 1.00 OV 0.94 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.05 KP 1.00* LA 0.90 ! MK 0.95 NL 1.10 OV 1.00 PT 1.01 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.076377Jy sigma=0.000888 ! Fit after self-cal, rms=0.074482Jy sigma=0.000881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.673 mas, bmaj=4.789 mas, bpa=-49.49 degrees ! Estimated noise=497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220728 Jy ! Component: 100 - total flux cleaned = -0.000274402 Jy ! Component: 150 - total flux cleaned = -0.000300951 Jy ! Component: 200 - total flux cleaned = -0.000300753 Jy ! Total flux subtracted in 200 components = -0.000300753 Jy ! Clean residual min=-0.001894 max=0.002021 Jy/beam ! Clean residual mean=-0.000008 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0846069 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.0846069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074469Jy sigma=0.000881 ! Fit after self-cal, rms=0.074326Jy sigma=0.000881 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074326Jy sigma=0.000881 ! Fit after self-cal, rms=0.075276Jy sigma=0.000880 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.67 mas, bmaj=4.767 mas, bpa=-52.01 degrees ! Estimated noise=496.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017895 Jy ! Component: 100 - total flux cleaned = 0.000179756 Jy ! Component: 150 - total flux cleaned = 0.000178978 Jy ! Component: 200 - total flux cleaned = 0.000164415 Jy ! Total flux subtracted in 200 components = 0.000164415 Jy ! Clean residual min=-0.001658 max=0.001688 Jy/beam ! Clean residual mean=-0.000003 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0847714 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0847714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075268Jy sigma=0.000879 ! Fit after self-cal, rms=0.075284Jy sigma=0.000879 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.02822e-06 Jy ! Component: 100 - total flux cleaned = -3.01924e-06 Jy ! Component: 150 - total flux cleaned = -1.44165e-05 Jy ! Component: 200 - total flux cleaned = -1.4306e-05 Jy ! Total flux subtracted in 200 components = -1.4306e-05 Jy ! Clean residual min=-0.001669 max=0.001648 Jy/beam ! Clean residual mean=-0.000003 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.084757 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0847571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075280Jy sigma=0.000879 ! Fit after self-cal, rms=0.075282Jy sigma=0.000879 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075282Jy sigma=0.000879 ! Fit after self-cal, rms=0.075477Jy sigma=0.000879 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.668 mas, bmaj=4.742 mas, bpa=-56.77 degrees ! Estimated noise=495.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017916 Jy ! Component: 100 - total flux cleaned = 0.000179667 Jy ! Component: 150 - total flux cleaned = 0.00016718 Jy ! Component: 200 - total flux cleaned = 0.000166939 Jy ! Total flux subtracted in 200 components = 0.000166939 Jy ! Clean residual min=-0.001634 max=0.001631 Jy/beam ! Clean residual mean=-0.000002 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.084924 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.084924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075472Jy sigma=0.000879 ! Fit after self-cal, rms=0.075483Jy sigma=0.000879 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.94686e-06 Jy ! Component: 100 - total flux cleaned = -1.69597e-06 Jy ! Component: 150 - total flux cleaned = -1.73447e-06 Jy ! Component: 200 - total flux cleaned = -1.71031e-06 Jy ! Total flux subtracted in 200 components = -1.71031e-06 Jy ! Clean residual min=-0.001643 max=0.001622 Jy/beam ! Clean residual mean=-0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0849223 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0849223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075481Jy sigma=0.000879 ! Fit after self-cal, rms=0.075483Jy sigma=0.000879 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075483Jy sigma=0.000879 ! Fit after self-cal, rms=0.075563Jy sigma=0.000879 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.241 mas, bmaj=9.489 mas, bpa=21.85 degrees ! Estimated noise=576.508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615998 Jy ! Component: 100 - total flux cleaned = 0.000713831 Jy ! Component: 150 - total flux cleaned = 0.00076111 Jy ! Component: 200 - total flux cleaned = 0.000803566 Jy ! Total flux subtracted in 200 components = 0.000803566 Jy ! Clean residual min=-0.001466 max=0.001712 Jy/beam ! Clean residual mean=-0.000004 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0857258 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.0857258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075565Jy sigma=0.000879 ! Fit after self-cal, rms=0.075558Jy sigma=0.000879 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.45252e-05 Jy ! Component: 100 - total flux cleaned = 8.7647e-05 Jy ! Component: 150 - total flux cleaned = 0.000116852 Jy ! Component: 200 - total flux cleaned = 0.000162802 Jy ! Total flux subtracted in 200 components = 0.000162802 Jy ! Clean residual min=-0.001464 max=0.001685 Jy/beam ! Clean residual mean=-0.000004 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0858886 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0858886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075559Jy sigma=0.000879 ! Fit after self-cal, rms=0.075553Jy sigma=0.000879 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.661 mas, bmaj=4.723 mas, bpa=-61.93 degrees ! Estimated noise=495.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.661 x 4.723 at -61.93 degrees (North through East) ! Clean map min=-0.0015533 max=0.076165 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=3.744 mas, bpa=62.72 degrees ! Estimated noise=900.459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0588498 Jy ! Component: 100 - total flux cleaned = 0.0740608 Jy ! Component: 150 - total flux cleaned = 0.0794868 Jy ! Component: 200 - total flux cleaned = 0.0817953 Jy ! Total flux subtracted in 200 components = 0.0817953 Jy ! Clean residual min=-0.002947 max=0.002602 Jy/beam ! Clean residual mean=-0.000001 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.0817953 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0817953 Jy ! Inverting map and beam ! Estimated beam: bmin=4.661 mas, bmaj=4.723 mas, bpa=-61.93 degrees ! Estimated noise=495.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209006 Jy ! Component: 100 - total flux cleaned = 0.00326795 Jy ! Component: 150 - total flux cleaned = 0.00391036 Jy ! Component: 200 - total flux cleaned = 0.00411949 Jy ! Total flux subtracted in 200 components = 0.00411949 Jy ! Clean residual min=-0.001528 max=0.001567 Jy/beam ! Clean residual mean=-0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0859148 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.0859148 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.241 mas, bmaj=9.489 mas, bpa=21.85 degrees ! Estimated noise=576.508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953779 Jy ! Component: 100 - total flux cleaned = 0.0014709 Jy ! Component: 150 - total flux cleaned = 0.00162089 Jy ! Component: 200 - total flux cleaned = 0.00167742 Jy ! Total flux subtracted in 200 components = 0.00167742 Jy ! Clean residual min=-0.001503 max=0.001555 Jy/beam ! Clean residual mean=-0.000004 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0875922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.99808e-05 Jy ! Component: 100 - total flux cleaned = 8.44914e-05 Jy ! Component: 150 - total flux cleaned = 8.46334e-05 Jy ! Component: 200 - total flux cleaned = 9.47774e-05 Jy ! Total flux subtracted in 200 components = 9.47774e-05 Jy ! Clean residual min=-0.001481 max=0.001537 Jy/beam ! Clean residual mean=-0.000004 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.087687 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.0876869 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.661 mas, bmaj=4.723 mas, bpa=-61.93 degrees ! Estimated noise=495.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300593 Jy ! Component: 100 - total flux cleaned = -0.000474213 Jy ! Component: 150 - total flux cleaned = -0.000567266 Jy ! Component: 200 - total flux cleaned = -0.00063385 Jy ! Total flux subtracted in 200 components = -0.00063385 Jy ! Clean residual min=-0.001471 max=0.001392 Jy/beam ! Clean residual mean=-0.000002 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0870531 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0870531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075499Jy sigma=0.000879 ! Fit after self-cal, rms=0.075551Jy sigma=0.000879 wmodel J0934+3926_S_2014_01_04_pus_map.mod ! Writing 64 model components to file: J0934+3926_S_2014_01_04_pus_map.mod wobs J0934+3926_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0934+3926_S_2014_01_04_pus_uvs.fits wwins J0934+3926_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0934+3926_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039941 Jy ! Component: 100 - total flux cleaned = -0.000550196 Jy ! Component: 150 - total flux cleaned = -0.000786289 Jy ! Component: 200 - total flux cleaned = -0.000876325 Jy ! Component: 250 - total flux cleaned = -0.000855348 Jy ! Component: 300 - total flux cleaned = -0.000917813 Jy ! Component: 350 - total flux cleaned = -0.000898789 Jy ! Component: 400 - total flux cleaned = -0.000841916 Jy ! Component: 450 - total flux cleaned = -0.000749534 Jy ! Component: 500 - total flux cleaned = -0.000678033 Jy ! Component: 550 - total flux cleaned = -0.00064339 Jy ! Component: 600 - total flux cleaned = -0.000609329 Jy ! Component: 650 - total flux cleaned = -0.000559683 Jy ! Component: 700 - total flux cleaned = -0.000527275 Jy ! Component: 750 - total flux cleaned = -0.000558493 Jy ! Component: 800 - total flux cleaned = -0.00057313 Jy ! Component: 850 - total flux cleaned = -0.000542628 Jy ! Component: 900 - total flux cleaned = -0.000528173 Jy ! Component: 950 - total flux cleaned = -0.000469878 Jy ! Component: 1000 - total flux cleaned = -0.000398576 Jy ! Component: 1050 - total flux cleaned = -0.000314798 Jy ! Component: 1100 - total flux cleaned = -0.00027326 Jy ! Component: 1150 - total flux cleaned = -0.000232269 Jy ! Component: 1200 - total flux cleaned = -0.000125036 Jy ! Component: 1250 - total flux cleaned = -4.60284e-05 Jy ! Component: 1300 - total flux cleaned = 5.79872e-05 Jy ! Component: 1350 - total flux cleaned = 0.00013482 Jy ! Component: 1400 - total flux cleaned = 0.000198285 Jy ! Component: 1450 - total flux cleaned = 0.00028578 Jy ! Component: 1500 - total flux cleaned = 0.000372119 Jy ! Component: 1550 - total flux cleaned = 0.000518091 Jy ! Component: 1600 - total flux cleaned = 0.000590018 Jy ! Component: 1650 - total flux cleaned = 0.000672979 Jy ! Component: 1700 - total flux cleaned = 0.000778297 Jy ! Component: 1750 - total flux cleaned = 0.000859151 Jy ! Component: 1800 - total flux cleaned = 0.00091612 Jy ! Component: 1850 - total flux cleaned = 0.000927388 Jy ! Component: 1900 - total flux cleaned = 0.000972112 Jy ! Component: 1950 - total flux cleaned = 0.000994229 Jy ! Component: 2000 - total flux cleaned = 0.00104899 Jy ! Component: 2050 - total flux cleaned = 0.0010812 Jy ! Component: 2100 - total flux cleaned = 0.00110239 Jy ! Component: 2150 - total flux cleaned = 0.00113415 Jy ! Component: 2200 - total flux cleaned = 0.00115501 Jy ! Component: 2250 - total flux cleaned = 0.00118609 Jy ! Component: 2300 - total flux cleaned = 0.00124763 Jy ! Component: 2350 - total flux cleaned = 0.00126803 Jy ! Component: 2400 - total flux cleaned = 0.00131837 Jy ! Component: 2450 - total flux cleaned = 0.0013484 Jy ! Component: 2500 - total flux cleaned = 0.00138792 Jy ! Component: 2550 - total flux cleaned = 0.00144673 Jy ! Component: 2600 - total flux cleaned = 0.00150497 Jy ! Component: 2650 - total flux cleaned = 0.00153393 Jy ! Component: 2700 - total flux cleaned = 0.00160086 Jy ! Component: 2750 - total flux cleaned = 0.00164829 Jy ! Component: 2800 - total flux cleaned = 0.00171404 Jy ! Component: 2850 - total flux cleaned = 0.00176988 Jy ! Component: 2900 - total flux cleaned = 0.00177906 Jy ! Component: 2950 - total flux cleaned = 0.00183393 Jy ! Component: 3000 - total flux cleaned = 0.00186109 Jy ! Component: 3050 - total flux cleaned = 0.00189724 Jy ! Component: 3100 - total flux cleaned = 0.00195979 Jy ! Component: 3150 - total flux cleaned = 0.00197747 Jy ! Component: 3200 - total flux cleaned = 0.00200389 Jy ! Component: 3250 - total flux cleaned = 0.00203888 Jy ! Component: 3300 - total flux cleaned = 0.00209095 Jy ! Component: 3350 - total flux cleaned = 0.00214257 Jy ! Component: 3400 - total flux cleaned = 0.00216829 Jy ! Component: 3450 - total flux cleaned = 0.00223627 Jy ! Component: 3500 - total flux cleaned = 0.00225315 Jy ! Component: 3550 - total flux cleaned = 0.00228668 Jy ! Component: 3600 - total flux cleaned = 0.00231167 Jy ! Component: 3650 - total flux cleaned = 0.00235303 Jy ! Component: 3700 - total flux cleaned = 0.0023859 Jy ! Component: 3750 - total flux cleaned = 0.00243487 Jy ! Component: 3800 - total flux cleaned = 0.00243488 Jy ! Component: 3850 - total flux cleaned = 0.00245912 Jy ! Component: 3900 - total flux cleaned = 0.00250732 Jy ! Component: 3950 - total flux cleaned = 0.00250731 Jy ! Component: 4000 - total flux cleaned = 0.00255495 Jy ! Component: 4050 - total flux cleaned = 0.0025707 Jy ! Total flux subtracted in 4096 components = 0.00258644 Jy ! Clean residual min=-0.000588 max=0.000546 Jy/beam ! Clean residual mean=0.000002 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0896396 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 296 components and 0.0896396 Jy ![Exited script file: muppet] wmap "J0934+3926_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.661 x 4.723 at -61.93 degrees (North through East) ! Clean map min=-0.0008807 max=0.076595 Jy/beam ! Writing clean map to FITS file: J0934+3926_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0765951 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000129281 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.506354 0.506354 1.01271 2.02542 4.05083 8.10167 16.2033 32.4067 64.8134 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.661 x 4.723 at -61.93 degrees (North through East) ! Clean map min=-0.0008807 max=0.076595 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0934+3926_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:23:24 2017