! Started logfile: J0930+7420_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:19:33 2017 obs J0930+7420_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0930+7420_S_2015_01_23_pus_uva.fits ! AN table 1: 105 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961905 visibilities/baseline/integration-bin. ! Found source: J0930+7420 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 18180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0930+7420_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883675Jy sigma=0.008128 ! Fit after self-cal, rms=0.788373Jy sigma=0.007279 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=6.419 mas, bpa=78.42 degrees ! Estimated noise=1088.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172153 Jy ! Component: 100 - total flux cleaned = 0.222033 Jy ! Total flux subtracted in 100 components = 0.222033 Jy ! Clean residual min=-0.012390 max=0.023877 Jy/beam ! Clean residual mean=-0.000011 rms=0.003364 Jy/beam ! Combined flux in latest and established models = 0.222033 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.222033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186761Jy sigma=0.001045 ! Fit after self-cal, rms=0.186733Jy sigma=0.001045 ! Inverting map ! Added new window around map position (30.5, 15). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266404 Jy ! Component: 100 - total flux cleaned = 0.0428779 Jy ! Total flux subtracted in 100 components = 0.0428779 Jy ! Clean residual min=-0.010224 max=0.013803 Jy/beam ! Clean residual mean=-0.000008 rms=0.002619 Jy/beam ! Combined flux in latest and established models = 0.264911 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.264911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181874Jy sigma=0.000953 ! Fit after self-cal, rms=0.181792Jy sigma=0.000951 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=7.596 mas, bpa=76.64 degrees ! Estimated noise=596.891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200474 Jy ! Component: 100 - total flux cleaned = 0.0327525 Jy ! Component: 150 - total flux cleaned = 0.0418857 Jy ! Component: 200 - total flux cleaned = 0.0485903 Jy ! Total flux subtracted in 200 components = 0.0485903 Jy ! Clean residual min=-0.008054 max=0.010458 Jy/beam ! Clean residual mean=-0.000013 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.313501 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 75 components and 0.313501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179568Jy sigma=0.000908 ! Fit after self-cal, rms=0.179444Jy sigma=0.000906 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 0.96 KP 1.07 ! LA 0.97 MK 0.96 NL 1.02 OV 0.95 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.29 HN 1.03 KP 0.98 ! LA 0.96 MK 1.03 NL 1.04 OV 0.99 ! PT 1.02 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.44 HN 1.01 KP 0.85 ! LA 0.77 MK 1.07 NL 1.09 OV 0.92 ! PT 0.99 SC 1.11 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 5.49 HN 0.97 KP 0.78 ! LA 0.82 MK 1.07 NL 1.03 OV 0.96 ! PT 1.03 SC 1.05 ! ! ! Fit before self-cal, rms=0.179444Jy sigma=0.000906 ! Fit after self-cal, rms=0.427005Jy sigma=0.000799 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=7.693 mas, bpa=76.24 degrees ! Estimated noise=601.803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022395 Jy ! Component: 100 - total flux cleaned = -0.000316641 Jy ! Component: 150 - total flux cleaned = -0.00040951 Jy ! Component: 200 - total flux cleaned = -0.000490532 Jy ! Total flux subtracted in 200 components = -0.000490532 Jy ! Clean residual min=-0.003523 max=0.003245 Jy/beam ! Clean residual mean=-0.000015 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.313011 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.313011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426768Jy sigma=0.000797 ! Fit after self-cal, rms=0.426948Jy sigma=0.000796 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426948Jy sigma=0.000796 ! Fit after self-cal, rms=0.314873Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=7.711 mas, bpa=76.62 degrees ! Estimated noise=602.584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203244 Jy ! Component: 100 - total flux cleaned = -0.00261802 Jy ! Component: 150 - total flux cleaned = -0.00292577 Jy ! Component: 200 - total flux cleaned = -0.0031386 Jy ! Total flux subtracted in 200 components = -0.0031386 Jy ! Clean residual min=-0.002416 max=0.002472 Jy/beam ! Clean residual mean=-0.000006 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.309872 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 0.309872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314761Jy sigma=0.000788 ! Fit after self-cal, rms=0.314758Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151278 Jy ! Component: 100 - total flux cleaned = 0.00167228 Jy ! Component: 150 - total flux cleaned = 0.00166983 Jy ! Component: 200 - total flux cleaned = 0.00171324 Jy ! Total flux subtracted in 200 components = 0.00171324 Jy ! Clean residual min=-0.002250 max=0.001819 Jy/beam ! Clean residual mean=-0.000007 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.311585 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 129 components and 0.311585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314652Jy sigma=0.000787 ! Fit after self-cal, rms=0.314663Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314663Jy sigma=0.000787 ! Fit after self-cal, rms=0.321474Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=7.725 mas, bpa=76.73 degrees ! Estimated noise=603.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000749903 Jy ! Component: 100 - total flux cleaned = -0.000896585 Jy ! Component: 150 - total flux cleaned = -0.000938987 Jy ! Component: 200 - total flux cleaned = -0.000938412 Jy ! Total flux subtracted in 200 components = -0.000938412 Jy ! Clean residual min=-0.002060 max=0.001872 Jy/beam ! Clean residual mean=-0.000006 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.310647 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 143 components and 0.310647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321397Jy sigma=0.000787 ! Fit after self-cal, rms=0.321408Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238891 Jy ! Component: 100 - total flux cleaned = -0.000275794 Jy ! Component: 150 - total flux cleaned = -0.000241647 Jy ! Component: 200 - total flux cleaned = -0.000181006 Jy ! Total flux subtracted in 200 components = -0.000181006 Jy ! Clean residual min=-0.002001 max=0.001900 Jy/beam ! Clean residual mean=-0.000006 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.310466 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 149 components and 0.310466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321356Jy sigma=0.000787 ! Fit after self-cal, rms=0.321358Jy sigma=0.000787 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321358Jy sigma=0.000787 ! Fit after self-cal, rms=0.326104Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.313 mas, bmaj=12.08 mas, bpa=73.41 degrees ! Estimated noise=777.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010286 Jy ! Component: 100 - total flux cleaned = -0.00121995 Jy ! Component: 150 - total flux cleaned = -0.00130011 Jy ! Component: 200 - total flux cleaned = -0.00123726 Jy ! Total flux subtracted in 200 components = -0.00123726 Jy ! Clean residual min=-0.002080 max=0.002228 Jy/beam ! Clean residual mean=-0.000013 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.309229 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 168 components and 0.309229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326033Jy sigma=0.000787 ! Fit after self-cal, rms=0.326041Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351565 Jy ! Component: 100 - total flux cleaned = -0.000285888 Jy ! Component: 150 - total flux cleaned = -0.000173259 Jy ! Component: 200 - total flux cleaned = -0.000123696 Jy ! Total flux subtracted in 200 components = -0.000123696 Jy ! Clean residual min=-0.002058 max=0.002185 Jy/beam ! Clean residual mean=-0.000013 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.309105 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 181 components and 0.309105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325992Jy sigma=0.000787 ! Fit after self-cal, rms=0.325996Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.734 mas, bpa=76.81 degrees ! Estimated noise=604.065 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.734 at 76.81 degrees (North through East) ! Clean map min=-0.0017501 max=0.22973 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=6.49 mas, bpa=78.57 degrees ! Estimated noise=1123.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176955 Jy ! Component: 100 - total flux cleaned = 0.227643 Jy ! Component: 150 - total flux cleaned = 0.252751 Jy ! Component: 200 - total flux cleaned = 0.26801 Jy ! Total flux subtracted in 200 components = 0.26801 Jy ! Clean residual min=-0.005766 max=0.008139 Jy/beam ! Clean residual mean=-0.000004 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.26801 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.26801 Jy ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.734 mas, bpa=76.81 degrees ! Estimated noise=604.065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137112 Jy ! Component: 100 - total flux cleaned = 0.0215469 Jy ! Component: 150 - total flux cleaned = 0.0265564 Jy ! Component: 200 - total flux cleaned = 0.0301113 Jy ! Total flux subtracted in 200 components = 0.0301113 Jy ! Clean residual min=-0.002239 max=0.002474 Jy/beam ! Clean residual mean=-0.000007 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.298122 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 58 components and 0.298122 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.313 mas, bmaj=12.08 mas, bpa=73.41 degrees ! Estimated noise=777.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371084 Jy ! Component: 100 - total flux cleaned = 0.00606428 Jy ! Component: 150 - total flux cleaned = 0.0077457 Jy ! Component: 200 - total flux cleaned = 0.00897162 Jy ! Total flux subtracted in 200 components = 0.00897162 Jy ! Clean residual min=-0.002174 max=0.002163 Jy/beam ! Clean residual mean=-0.000013 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.307093 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678013 Jy ! Component: 100 - total flux cleaned = 0.000956547 Jy ! Component: 150 - total flux cleaned = 0.00116507 Jy ! Component: 200 - total flux cleaned = 0.0013008 Jy ! Total flux subtracted in 200 components = 0.0013008 Jy ! Clean residual min=-0.002061 max=0.002142 Jy/beam ! Clean residual mean=-0.000013 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.308394 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 121 components and 0.308394 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.734 mas, bpa=76.81 degrees ! Estimated noise=604.065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.28147e-05 Jy ! Component: 100 - total flux cleaned = 7.26046e-05 Jy ! Component: 150 - total flux cleaned = 7.07716e-05 Jy ! Component: 200 - total flux cleaned = 0.000147901 Jy ! Total flux subtracted in 200 components = 0.000147901 Jy ! Clean residual min=-0.001962 max=0.002163 Jy/beam ! Clean residual mean=-0.000006 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.308542 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 144 components and 0.308542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325892Jy sigma=0.000787 ! Fit after self-cal, rms=0.325862Jy sigma=0.000787 wmodel J0930+7420_S_2015_01_23_pus_map.mod ! Writing 144 model components to file: J0930+7420_S_2015_01_23_pus_map.mod wobs J0930+7420_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0930+7420_S_2015_01_23_pus_uvs.fits wwins J0930+7420_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0930+7420_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516499 Jy ! Component: 100 - total flux cleaned = 0.000582776 Jy ! Component: 150 - total flux cleaned = 0.000582526 Jy ! Component: 200 - total flux cleaned = 0.00052204 Jy ! Component: 250 - total flux cleaned = 0.000463748 Jy ! Component: 300 - total flux cleaned = 0.000407332 Jy ! Component: 350 - total flux cleaned = 0.000324616 Jy ! Component: 400 - total flux cleaned = 0.000137367 Jy ! Component: 450 - total flux cleaned = -9.70305e-05 Jy ! Component: 500 - total flux cleaned = -0.000249602 Jy ! Component: 550 - total flux cleaned = -0.000399157 Jy ! Component: 600 - total flux cleaned = -0.000545706 Jy ! Component: 650 - total flux cleaned = -0.000714203 Jy ! Component: 700 - total flux cleaned = -0.000785553 Jy ! Component: 750 - total flux cleaned = -0.000926005 Jy ! Component: 800 - total flux cleaned = -0.00106381 Jy ! Component: 850 - total flux cleaned = -0.00115402 Jy ! Component: 900 - total flux cleaned = -0.00122146 Jy ! Component: 950 - total flux cleaned = -0.00130982 Jy ! Component: 1000 - total flux cleaned = -0.00139671 Jy ! Component: 1050 - total flux cleaned = -0.00148252 Jy ! Component: 1100 - total flux cleaned = -0.00156721 Jy ! Component: 1150 - total flux cleaned = -0.00163019 Jy ! Component: 1200 - total flux cleaned = -0.00165081 Jy ! Component: 1250 - total flux cleaned = -0.00165089 Jy ! Component: 1300 - total flux cleaned = -0.00167141 Jy ! Component: 1350 - total flux cleaned = -0.00175164 Jy ! Component: 1400 - total flux cleaned = -0.00181109 Jy ! Component: 1450 - total flux cleaned = -0.0017521 Jy ! Component: 1500 - total flux cleaned = -0.00171325 Jy ! Component: 1550 - total flux cleaned = -0.00171316 Jy ! Component: 1600 - total flux cleaned = -0.00171312 Jy ! Component: 1650 - total flux cleaned = -0.00171312 Jy ! Component: 1700 - total flux cleaned = -0.0016757 Jy ! Component: 1750 - total flux cleaned = -0.00171318 Jy ! Component: 1800 - total flux cleaned = -0.00175006 Jy ! Component: 1850 - total flux cleaned = -0.00165852 Jy ! Component: 1900 - total flux cleaned = -0.00173126 Jy ! Component: 1950 - total flux cleaned = -0.00167739 Jy ! Component: 2000 - total flux cleaned = -0.00171325 Jy ! Component: 2050 - total flux cleaned = -0.00174855 Jy ! Component: 2100 - total flux cleaned = -0.00176617 Jy ! Component: 2150 - total flux cleaned = -0.00180127 Jy ! Component: 2200 - total flux cleaned = -0.00180132 Jy ! Component: 2250 - total flux cleaned = -0.00187034 Jy ! Component: 2300 - total flux cleaned = -0.00193887 Jy ! Component: 2350 - total flux cleaned = -0.00197293 Jy ! Component: 2400 - total flux cleaned = -0.00195613 Jy ! Component: 2450 - total flux cleaned = -0.00210685 Jy ! Component: 2500 - total flux cleaned = -0.00210687 Jy ! Component: 2550 - total flux cleaned = -0.00217289 Jy ! Component: 2600 - total flux cleaned = -0.00218926 Jy ! Component: 2650 - total flux cleaned = -0.00220551 Jy ! Component: 2700 - total flux cleaned = -0.00223817 Jy ! Component: 2750 - total flux cleaned = -0.00227056 Jy ! Component: 2800 - total flux cleaned = -0.00228663 Jy ! Component: 2850 - total flux cleaned = -0.00231859 Jy ! Component: 2900 - total flux cleaned = -0.00231869 Jy ! Component: 2950 - total flux cleaned = -0.00235022 Jy ! Component: 3000 - total flux cleaned = -0.00244411 Jy ! Component: 3050 - total flux cleaned = -0.00247512 Jy ! Component: 3100 - total flux cleaned = -0.00252133 Jy ! Component: 3150 - total flux cleaned = -0.00250598 Jy ! Component: 3200 - total flux cleaned = -0.00253655 Jy ! Component: 3250 - total flux cleaned = -0.00259737 Jy ! Component: 3300 - total flux cleaned = -0.00262766 Jy ! Component: 3350 - total flux cleaned = -0.00265761 Jy ! Component: 3400 - total flux cleaned = -0.00268762 Jy ! Component: 3450 - total flux cleaned = -0.00277702 Jy ! Component: 3500 - total flux cleaned = -0.00279183 Jy ! Component: 3550 - total flux cleaned = -0.00282128 Jy ! Component: 3600 - total flux cleaned = -0.00285059 Jy ! Component: 3650 - total flux cleaned = -0.00290919 Jy ! Component: 3700 - total flux cleaned = -0.00290913 Jy ! Component: 3750 - total flux cleaned = -0.00293816 Jy ! Component: 3800 - total flux cleaned = -0.00299594 Jy ! Component: 3850 - total flux cleaned = -0.0030966 Jy ! Component: 3900 - total flux cleaned = -0.00309659 Jy ! Component: 3950 - total flux cleaned = -0.00313939 Jy ! Component: 4000 - total flux cleaned = -0.00319626 Jy ! Component: 4050 - total flux cleaned = -0.00325282 Jy ! Total flux subtracted in 4096 components = -0.00326699 Jy ! Clean residual min=-0.000987 max=0.000876 Jy/beam ! Clean residual mean=-0.000004 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.305275 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 409 components and 0.305275 Jy ![Exited script file: muppet] wmap "J0930+7420_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.734 at 76.81 degrees (North through East) ! Clean map min=-0.0017403 max=0.23349 Jy/beam ! Writing clean map to FITS file: J0930+7420_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.233486 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000260773 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.33506 0.33506 0.67012 1.34024 2.68048 5.36096 10.7219 21.4439 42.8877 85.7754 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.233 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.734 at 76.81 degrees (North through East) ! Clean map min=-0.0017403 max=0.23349 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0930+7420_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:19:38 2017