! Started logfile: J0929-1820_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:23:04 2017 obs J0929-1820_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0929-1820_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J0929-1820 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 10584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0929-1820_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.879152Jy sigma=0.010847 ! Fit after self-cal, rms=0.810526Jy sigma=0.010083 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.543 mas, bmaj=5.849 mas, bpa=-1.057 degrees ! Estimated noise=958.401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145333 Jy ! Component: 100 - total flux cleaned = 0.177071 Jy ! Total flux subtracted in 100 components = 0.177071 Jy ! Clean residual min=-0.006132 max=0.009788 Jy/beam ! Clean residual mean=-0.000031 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.177071 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.177071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086317Jy sigma=0.000957 ! Fit after self-cal, rms=0.086312Jy sigma=0.000956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=6.864 mas, bpa=-1.201 degrees ! Estimated noise=583.427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124371 Jy ! Component: 100 - total flux cleaned = 0.0177079 Jy ! Component: 150 - total flux cleaned = 0.0206185 Jy ! Component: 200 - total flux cleaned = 0.0222731 Jy ! Total flux subtracted in 200 components = 0.0222731 Jy ! Clean residual min=-0.005498 max=0.007766 Jy/beam ! Clean residual mean=-0.000033 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.199344 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.199344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084023Jy sigma=0.000945 ! Fit after self-cal, rms=0.084077Jy sigma=0.000945 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.85 KP 1.00* LA 1.00 ! MK 1.00 NL 0.97 OV 0.94 PT 1.00 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.99 KP 1.00* LA 0.98 ! MK 0.99 NL 1.05 OV 0.99 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.12 KP 1.00* LA 0.81 ! MK 1.00 NL 1.01 OV 0.90 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.03 KP 1.00* LA 0.86 ! MK 1.01 NL 1.10 OV 0.98 PT 0.99 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.084077Jy sigma=0.000945 ! Fit after self-cal, rms=0.079312Jy sigma=0.000905 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=6.926 mas, bpa=-1.116 degrees ! Estimated noise=584.308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.25219e-05 Jy ! Component: 100 - total flux cleaned = -0.00010576 Jy ! Component: 150 - total flux cleaned = -0.000184367 Jy ! Component: 200 - total flux cleaned = -0.000257488 Jy ! Total flux subtracted in 200 components = -0.000257488 Jy ! Clean residual min=-0.003204 max=0.004235 Jy/beam ! Clean residual mean=0.000007 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.199087 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.199087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079259Jy sigma=0.000905 ! Fit after self-cal, rms=0.078933Jy sigma=0.000904 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078933Jy sigma=0.000904 ! Fit after self-cal, rms=0.078750Jy sigma=0.000899 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=6.921 mas, bpa=-1.174 degrees ! Estimated noise=584.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344356 Jy ! Component: 100 - total flux cleaned = 0.000343721 Jy ! Component: 150 - total flux cleaned = 0.000320147 Jy ! Component: 200 - total flux cleaned = 0.000275349 Jy ! Total flux subtracted in 200 components = 0.000275349 Jy ! Clean residual min=-0.002557 max=0.004557 Jy/beam ! Clean residual mean=0.000005 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.199362 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.199362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078728Jy sigma=0.000899 ! Fit after self-cal, rms=0.078732Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362564 Jy ! Component: 100 - total flux cleaned = 0.00382123 Jy ! Component: 150 - total flux cleaned = 0.00373172 Jy ! Component: 200 - total flux cleaned = 0.00380769 Jy ! Total flux subtracted in 200 components = 0.00380769 Jy ! Clean residual min=-0.002327 max=0.001998 Jy/beam ! Clean residual mean=0.000007 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.20317 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 0.20317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078552Jy sigma=0.000897 ! Fit after self-cal, rms=0.078527Jy sigma=0.000897 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078527Jy sigma=0.000897 ! Fit after self-cal, rms=0.078365Jy sigma=0.000896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=6.921 mas, bpa=-1.127 degrees ! Estimated noise=583.717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886477 Jy ! Component: 100 - total flux cleaned = 0.000823035 Jy ! Component: 150 - total flux cleaned = 0.000770681 Jy ! Component: 200 - total flux cleaned = 0.000770136 Jy ! Total flux subtracted in 200 components = 0.000770136 Jy ! Clean residual min=-0.002019 max=0.001962 Jy/beam ! Clean residual mean=0.000006 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.20394 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.20394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078336Jy sigma=0.000896 ! Fit after self-cal, rms=0.078325Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116338 Jy ! Component: 100 - total flux cleaned = 8.95656e-06 Jy ! Component: 150 - total flux cleaned = -3.97621e-05 Jy ! Component: 200 - total flux cleaned = -6.95091e-05 Jy ! Total flux subtracted in 200 components = -6.95091e-05 Jy ! Clean residual min=-0.001929 max=0.001954 Jy/beam ! Clean residual mean=0.000006 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.203871 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.203871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078318Jy sigma=0.000896 ! Fit after self-cal, rms=0.078316Jy sigma=0.000896 ! Inverting map ! Added new window around map position (-111, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731833 Jy ! Component: 100 - total flux cleaned = 0.000943228 Jy ! Component: 150 - total flux cleaned = 0.00110589 Jy ! Component: 200 - total flux cleaned = 0.00118454 Jy ! Total flux subtracted in 200 components = 0.00118454 Jy ! Clean residual min=-0.001869 max=0.001780 Jy/beam ! Clean residual mean=0.000006 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.205055 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.205055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078261Jy sigma=0.000896 ! Fit after self-cal, rms=0.078253Jy sigma=0.000896 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078253Jy sigma=0.000896 ! Fit after self-cal, rms=0.078259Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.749 mas, bmaj=16.06 mas, bpa=7.804 degrees ! Estimated noise=724.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788411 Jy ! Component: 100 - total flux cleaned = 0.00109774 Jy ! Component: 150 - total flux cleaned = 0.00115015 Jy ! Component: 200 - total flux cleaned = 0.00113482 Jy ! Total flux subtracted in 200 components = 0.00113482 Jy ! Clean residual min=-0.001309 max=0.001439 Jy/beam ! Clean residual mean=0.000007 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.20619 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.20619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078251Jy sigma=0.000895 ! Fit after self-cal, rms=0.078250Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034571 Jy ! Component: 100 - total flux cleaned = 0.000359504 Jy ! Component: 150 - total flux cleaned = 0.000360165 Jy ! Component: 200 - total flux cleaned = 0.000326989 Jy ! Total flux subtracted in 200 components = 0.000326989 Jy ! Clean residual min=-0.001291 max=0.001412 Jy/beam ! Clean residual mean=0.000006 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.206517 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 119 components and 0.206517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078246Jy sigma=0.000895 ! Fit after self-cal, rms=0.078246Jy sigma=0.000895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.92 mas, bpa=-1.142 degrees ! Estimated noise=584.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.92 at -1.142 degrees (North through East) ! Clean map min=-0.0019581 max=0.1883 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.527 mas, bmaj=5.888 mas, bpa=-1.074 degrees ! Estimated noise=968.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146847 Jy ! Component: 100 - total flux cleaned = 0.179109 Jy ! Component: 150 - total flux cleaned = 0.189214 Jy ! Component: 200 - total flux cleaned = 0.194847 Jy ! Total flux subtracted in 200 components = 0.194847 Jy ! Clean residual min=-0.003142 max=0.003183 Jy/beam ! Clean residual mean=-0.000004 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.194847 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.194847 Jy ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.92 mas, bpa=-1.142 degrees ! Estimated noise=584.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428513 Jy ! Component: 100 - total flux cleaned = 0.00700245 Jy ! Component: 150 - total flux cleaned = 0.00845637 Jy ! Component: 200 - total flux cleaned = 0.00939747 Jy ! Total flux subtracted in 200 components = 0.00939747 Jy ! Clean residual min=-0.002168 max=0.001735 Jy/beam ! Clean residual mean=0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.204245 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.204245 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.749 mas, bmaj=16.06 mas, bpa=7.804 degrees ! Estimated noise=724.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147782 Jy ! Component: 100 - total flux cleaned = 0.00219363 Jy ! Component: 150 - total flux cleaned = 0.00241199 Jy ! Component: 200 - total flux cleaned = 0.00249437 Jy ! Total flux subtracted in 200 components = 0.00249437 Jy ! Clean residual min=-0.001555 max=0.001537 Jy/beam ! Clean residual mean=0.000007 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.206739 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.093e-07 Jy ! Component: 100 - total flux cleaned = 1.09705e-06 Jy ! Component: 150 - total flux cleaned = 9.53047e-07 Jy ! Component: 200 - total flux cleaned = -1.86159e-05 Jy ! Total flux subtracted in 200 components = -1.86159e-05 Jy ! Clean residual min=-0.001406 max=0.001493 Jy/beam ! Clean residual mean=0.000007 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.20672 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 0.20672 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.92 mas, bpa=-1.142 degrees ! Estimated noise=584.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159901 Jy ! Component: 100 - total flux cleaned = 0.000340803 Jy ! Component: 150 - total flux cleaned = 0.000496636 Jy ! Component: 200 - total flux cleaned = 0.000580625 Jy ! Total flux subtracted in 200 components = 0.000580625 Jy ! Clean residual min=-0.001893 max=0.001563 Jy/beam ! Clean residual mean=0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.207301 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.207301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078259Jy sigma=0.000895 ! Fit after self-cal, rms=0.078250Jy sigma=0.000895 wmodel J0929-1820_S_2014_01_04_pus_map.mod ! Writing 78 model components to file: J0929-1820_S_2014_01_04_pus_map.mod wobs J0929-1820_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0929-1820_S_2014_01_04_pus_uvs.fits wwins J0929-1820_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0929-1820_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561101 Jy ! Component: 100 - total flux cleaned = -0.000832681 Jy ! Component: 150 - total flux cleaned = -0.000905261 Jy ! Component: 200 - total flux cleaned = -0.00104534 Jy ! Component: 250 - total flux cleaned = -0.00115846 Jy ! Component: 300 - total flux cleaned = -0.00122361 Jy ! Component: 350 - total flux cleaned = -0.00130721 Jy ! Component: 400 - total flux cleaned = -0.00138902 Jy ! Component: 450 - total flux cleaned = -0.00144848 Jy ! Component: 500 - total flux cleaned = -0.00144794 Jy ! Component: 550 - total flux cleaned = -0.00150472 Jy ! Component: 600 - total flux cleaned = -0.00150483 Jy ! Component: 650 - total flux cleaned = -0.00154126 Jy ! Component: 700 - total flux cleaned = -0.00152346 Jy ! Component: 750 - total flux cleaned = -0.00150581 Jy ! Component: 800 - total flux cleaned = -0.00143747 Jy ! Component: 850 - total flux cleaned = -0.00138737 Jy ! Component: 900 - total flux cleaned = -0.00132152 Jy ! Component: 950 - total flux cleaned = -0.00128922 Jy ! Component: 1000 - total flux cleaned = -0.00125724 Jy ! Component: 1050 - total flux cleaned = -0.001194 Jy ! Component: 1100 - total flux cleaned = -0.0011324 Jy ! Component: 1150 - total flux cleaned = -0.00114759 Jy ! Component: 1200 - total flux cleaned = -0.00110265 Jy ! Component: 1250 - total flux cleaned = -0.00113229 Jy ! Component: 1300 - total flux cleaned = -0.00107382 Jy ! Component: 1350 - total flux cleaned = -0.00107408 Jy ! Component: 1400 - total flux cleaned = -0.00101737 Jy ! Component: 1450 - total flux cleaned = -0.000975328 Jy ! Component: 1500 - total flux cleaned = -0.000934092 Jy ! Component: 1550 - total flux cleaned = -0.000906838 Jy ! Component: 1600 - total flux cleaned = -0.000852807 Jy ! Component: 1650 - total flux cleaned = -0.000772922 Jy ! Component: 1700 - total flux cleaned = -0.000720236 Jy ! Component: 1750 - total flux cleaned = -0.000681215 Jy ! Component: 1800 - total flux cleaned = -0.000629689 Jy ! Component: 1850 - total flux cleaned = -0.000578894 Jy ! Component: 1900 - total flux cleaned = -0.000553791 Jy ! Component: 1950 - total flux cleaned = -0.000541186 Jy ! Component: 2000 - total flux cleaned = -0.000491961 Jy ! Component: 2050 - total flux cleaned = -0.000479623 Jy ! Component: 2100 - total flux cleaned = -0.000443295 Jy ! Component: 2150 - total flux cleaned = -0.000383491 Jy ! Component: 2200 - total flux cleaned = -0.000348109 Jy ! Component: 2250 - total flux cleaned = -0.000324699 Jy ! Component: 2300 - total flux cleaned = -0.000290157 Jy ! Component: 2350 - total flux cleaned = -0.000290389 Jy ! Component: 2400 - total flux cleaned = -0.00024532 Jy ! Component: 2450 - total flux cleaned = -0.000267733 Jy ! Component: 2500 - total flux cleaned = -0.000234472 Jy ! Component: 2550 - total flux cleaned = -0.000212623 Jy ! Component: 2600 - total flux cleaned = -0.000180111 Jy ! Component: 2650 - total flux cleaned = -0.000147969 Jy ! Component: 2700 - total flux cleaned = -0.000126738 Jy ! Component: 2750 - total flux cleaned = -0.000126624 Jy ! Component: 2800 - total flux cleaned = -9.51341e-05 Jy ! Component: 2850 - total flux cleaned = -5.35507e-05 Jy ! Component: 2900 - total flux cleaned = -5.36227e-05 Jy ! Component: 2950 - total flux cleaned = -5.33759e-05 Jy ! Component: 3000 - total flux cleaned = -2.99106e-06 Jy ! Component: 3050 - total flux cleaned = 6.86864e-06 Jy ! Component: 3100 - total flux cleaned = -1.28124e-05 Jy ! Component: 3150 - total flux cleaned = 6.84537e-06 Jy ! Component: 3200 - total flux cleaned = 1.65638e-05 Jy ! Component: 3250 - total flux cleaned = 6.85587e-06 Jy ! Component: 3300 - total flux cleaned = 3.5516e-05 Jy ! Component: 3350 - total flux cleaned = 1.64826e-05 Jy ! Component: 3400 - total flux cleaned = 7.0663e-06 Jy ! Component: 3450 - total flux cleaned = 7.07245e-06 Jy ! Component: 3500 - total flux cleaned = 1.63304e-05 Jy ! Component: 3550 - total flux cleaned = -2.9712e-05 Jy ! Component: 3600 - total flux cleaned = -1.13628e-05 Jy ! Component: 3650 - total flux cleaned = -2.29727e-06 Jy ! Component: 3700 - total flux cleaned = 1.55782e-05 Jy ! Component: 3750 - total flux cleaned = -2.02066e-05 Jy ! Component: 3800 - total flux cleaned = 6.50723e-06 Jy ! Component: 3850 - total flux cleaned = 2.40655e-05 Jy ! Component: 3900 - total flux cleaned = 2.40419e-05 Jy ! Component: 3950 - total flux cleaned = 5.01636e-05 Jy ! Component: 4000 - total flux cleaned = 6.74575e-05 Jy ! Component: 4050 - total flux cleaned = 9.31876e-05 Jy ! Total flux subtracted in 4096 components = 7.61518e-05 Jy ! Clean residual min=-0.000607 max=0.000483 Jy/beam ! Clean residual mean=0.000001 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.207377 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 322 components and 0.207377 Jy ![Exited script file: muppet] wmap "J0929-1820_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.92 at -1.142 degrees (North through East) ! Clean map min=-0.0015885 max=0.18895 Jy/beam ! Writing clean map to FITS file: J0929-1820_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.188946 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142334 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.225993 0.225993 0.451985 0.90397 1.80794 3.61588 7.23176 14.4635 28.927 57.8541 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.188 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.92 at -1.142 degrees (North through East) ! Clean map min=-0.0015885 max=0.18895 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0929-1820_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:23:09 2017