! Started logfile: J0927+5717_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:19:28 2017 obs J0927+5717_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0927+5717_S_2015_01_23_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882479 visibilities/baseline/integration-bin. ! Found source: J0927+5717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 16520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0927+5717_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941997Jy sigma=0.011250 ! Fit after self-cal, rms=0.928060Jy sigma=0.011124 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=3.831 mas, bpa=-15.21 degrees ! Estimated noise=845.847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561823 Jy ! Component: 100 - total flux cleaned = 0.0685018 Jy ! Total flux subtracted in 100 components = 0.0685018 Jy ! Clean residual min=-0.003365 max=0.003870 Jy/beam ! Clean residual mean=0.000001 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0685018 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0685018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103522Jy sigma=0.000785 ! Fit after self-cal, rms=0.103504Jy sigma=0.000785 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=4.49 mas, bpa=-9.629 degrees ! Estimated noise=480.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546529 Jy ! Component: 100 - total flux cleaned = 0.0080854 Jy ! Component: 150 - total flux cleaned = 0.00960972 Jy ! Component: 200 - total flux cleaned = 0.0106131 Jy ! Total flux subtracted in 200 components = 0.0106131 Jy ! Clean residual min=-0.002763 max=0.002049 Jy/beam ! Clean residual mean=-0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0791149 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.0791149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102964Jy sigma=0.000782 ! Fit after self-cal, rms=0.102966Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.61 HN 0.96 KP 1.08 ! LA 0.99 MK 1.03 NL 1.03 OV 0.99 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.72 HN 1.02 KP 0.99 ! LA 0.97 MK 1.00 NL 1.05 OV 1.05 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.78 HN 1.01 KP 0.92 ! LA 0.79 MK 1.07 NL 1.22 OV 0.96 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.58 HN 0.99 KP 0.82 ! LA 0.81 MK 1.00 NL 1.03 OV 1.06 ! PT 1.08 SC 0.98 ! ! ! Fit before self-cal, rms=0.102966Jy sigma=0.000782 ! Fit after self-cal, rms=0.081557Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=4.55 mas, bpa=-10.56 degrees ! Estimated noise=480.026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236577 Jy ! Component: 100 - total flux cleaned = -0.000289202 Jy ! Component: 150 - total flux cleaned = -0.000289435 Jy ! Component: 200 - total flux cleaned = -0.000269581 Jy ! Total flux subtracted in 200 components = -0.000269581 Jy ! Clean residual min=-0.001523 max=0.001482 Jy/beam ! Clean residual mean=0.000000 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0788453 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0788453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081550Jy sigma=0.000775 ! Fit after self-cal, rms=0.081432Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081432Jy sigma=0.000775 ! Fit after self-cal, rms=0.080943Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=4.548 mas, bpa=-10.05 degrees ! Estimated noise=479.094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.34363e-05 Jy ! Component: 100 - total flux cleaned = -8.95215e-06 Jy ! Component: 150 - total flux cleaned = 1.07985e-05 Jy ! Component: 200 - total flux cleaned = 1.04778e-05 Jy ! Total flux subtracted in 200 components = 1.04778e-05 Jy ! Clean residual min=-0.001418 max=0.001413 Jy/beam ! Clean residual mean=-0.000000 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0788558 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.0788558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080941Jy sigma=0.000774 ! Fit after self-cal, rms=0.080948Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.46189e-05 Jy ! Component: 100 - total flux cleaned = -3.64035e-06 Jy ! Component: 150 - total flux cleaned = 1.66632e-05 Jy ! Component: 200 - total flux cleaned = 3.04439e-05 Jy ! Total flux subtracted in 200 components = 3.04439e-05 Jy ! Clean residual min=-0.001414 max=0.001409 Jy/beam ! Clean residual mean=-0.000000 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0788862 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.0788862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080947Jy sigma=0.000774 ! Fit after self-cal, rms=0.080947Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080947Jy sigma=0.000774 ! Fit after self-cal, rms=0.080907Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=4.551 mas, bpa=-9.839 degrees ! Estimated noise=478.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.23753e-05 Jy ! Component: 100 - total flux cleaned = -6.80052e-05 Jy ! Component: 150 - total flux cleaned = -5.45582e-05 Jy ! Component: 200 - total flux cleaned = -4.32264e-05 Jy ! Total flux subtracted in 200 components = -4.32264e-05 Jy ! Clean residual min=-0.001400 max=0.001418 Jy/beam ! Clean residual mean=-0.000000 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.078843 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 43 components and 0.078843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080907Jy sigma=0.000774 ! Fit after self-cal, rms=0.080908Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07728e-05 Jy ! Component: 100 - total flux cleaned = -2.10116e-05 Jy ! Component: 150 - total flux cleaned = -1.40443e-05 Jy ! Component: 200 - total flux cleaned = -7.53394e-06 Jy ! Total flux subtracted in 200 components = -7.53394e-06 Jy ! Clean residual min=-0.001397 max=0.001419 Jy/beam ! Clean residual mean=-0.000000 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0788355 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.0788355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080907Jy sigma=0.000774 ! Fit after self-cal, rms=0.080907Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080907Jy sigma=0.000774 ! Fit after self-cal, rms=0.080894Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.814 mas, bmaj=8.353 mas, bpa=16.15 degrees ! Estimated noise=610.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231331 Jy ! Component: 100 - total flux cleaned = -0.000285683 Jy ! Component: 150 - total flux cleaned = -0.000304575 Jy ! Component: 200 - total flux cleaned = -0.0003188 Jy ! Total flux subtracted in 200 components = -0.0003188 Jy ! Clean residual min=-0.001701 max=0.001821 Jy/beam ! Clean residual mean=0.000000 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0785167 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 50 components and 0.0785167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080894Jy sigma=0.000774 ! Fit after self-cal, rms=0.080894Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.72154e-05 Jy ! Component: 100 - total flux cleaned = -4.7489e-05 Jy ! Component: 150 - total flux cleaned = -5.93295e-05 Jy ! Component: 200 - total flux cleaned = -7.3203e-05 Jy ! Total flux subtracted in 200 components = -7.3203e-05 Jy ! Clean residual min=-0.001691 max=0.001814 Jy/beam ! Clean residual mean=-0.000000 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0784435 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0784435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080894Jy sigma=0.000774 ! Fit after self-cal, rms=0.080894Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=4.554 mas, bpa=-9.681 degrees ! Estimated noise=478.709 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.837 x 4.554 at -9.681 degrees (North through East) ! Clean map min=-0.001328 max=0.072779 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=3.876 mas, bpa=-14.72 degrees ! Estimated noise=854.464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566818 Jy ! Component: 100 - total flux cleaned = 0.0690981 Jy ! Component: 150 - total flux cleaned = 0.0728445 Jy ! Component: 200 - total flux cleaned = 0.0748678 Jy ! Total flux subtracted in 200 components = 0.0748678 Jy ! Clean residual min=-0.002310 max=0.002484 Jy/beam ! Clean residual mean=-0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0748678 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0748678 Jy ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=4.554 mas, bpa=-9.681 degrees ! Estimated noise=478.709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154466 Jy ! Component: 100 - total flux cleaned = 0.00233617 Jy ! Component: 150 - total flux cleaned = 0.00281888 Jy ! Component: 200 - total flux cleaned = 0.00295796 Jy ! Total flux subtracted in 200 components = 0.00295796 Jy ! Clean residual min=-0.001383 max=0.001482 Jy/beam ! Clean residual mean=-0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0778257 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0778257 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.814 mas, bmaj=8.353 mas, bpa=16.15 degrees ! Estimated noise=610.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240854 Jy ! Component: 100 - total flux cleaned = 0.000314691 Jy ! Component: 150 - total flux cleaned = 0.000322355 Jy ! Component: 200 - total flux cleaned = 0.000329324 Jy ! Total flux subtracted in 200 components = 0.000329324 Jy ! Clean residual min=-0.001664 max=0.001791 Jy/beam ! Clean residual mean=-0.000000 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0781551 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.64697e-06 Jy ! Component: 100 - total flux cleaned = 1.28128e-05 Jy ! Component: 150 - total flux cleaned = 1.67558e-05 Jy ! Component: 200 - total flux cleaned = 2.23611e-05 Jy ! Total flux subtracted in 200 components = 2.23611e-05 Jy ! Clean residual min=-0.001663 max=0.001793 Jy/beam ! Clean residual mean=-0.000000 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0781774 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0781774 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=4.554 mas, bpa=-9.681 degrees ! Estimated noise=478.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137437 Jy ! Component: 100 - total flux cleaned = -0.000103898 Jy ! Component: 150 - total flux cleaned = -6.24496e-05 Jy ! Component: 200 - total flux cleaned = -2.42137e-05 Jy ! Total flux subtracted in 200 components = -2.42137e-05 Jy ! Clean residual min=-0.001401 max=0.001451 Jy/beam ! Clean residual mean=-0.000000 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0781532 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0781532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080898Jy sigma=0.000774 ! Fit after self-cal, rms=0.080896Jy sigma=0.000774 wmodel J0927+5717_S_2015_01_23_pus_map.mod ! Writing 39 model components to file: J0927+5717_S_2015_01_23_pus_map.mod wobs J0927+5717_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0927+5717_S_2015_01_23_pus_uvs.fits wwins J0927+5717_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0927+5717_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.26121e-05 Jy ! Component: 100 - total flux cleaned = 8.09971e-05 Jy ! Component: 150 - total flux cleaned = 5.87462e-05 Jy ! Component: 200 - total flux cleaned = -2.96988e-05 Jy ! Component: 250 - total flux cleaned = -9.40259e-05 Jy ! Component: 300 - total flux cleaned = -0.000135955 Jy ! Component: 350 - total flux cleaned = -0.000216968 Jy ! Component: 400 - total flux cleaned = -0.000296736 Jy ! Component: 450 - total flux cleaned = -0.000394582 Jy ! Component: 500 - total flux cleaned = -0.000413787 Jy ! Component: 550 - total flux cleaned = -0.000526939 Jy ! Component: 600 - total flux cleaned = -0.000582473 Jy ! Component: 650 - total flux cleaned = -0.000655152 Jy ! Component: 700 - total flux cleaned = -0.000655617 Jy ! Component: 750 - total flux cleaned = -0.000761486 Jy ! Component: 800 - total flux cleaned = -0.000796345 Jy ! Component: 850 - total flux cleaned = -0.000847651 Jy ! Component: 900 - total flux cleaned = -0.000932308 Jy ! Component: 950 - total flux cleaned = -0.000932375 Jy ! Component: 1000 - total flux cleaned = -0.00103088 Jy ! Component: 1050 - total flux cleaned = -0.00101475 Jy ! Component: 1100 - total flux cleaned = -0.00107847 Jy ! Component: 1150 - total flux cleaned = -0.00110994 Jy ! Component: 1200 - total flux cleaned = -0.00106329 Jy ! Component: 1250 - total flux cleaned = -0.00109405 Jy ! Component: 1300 - total flux cleaned = -0.00107894 Jy ! Component: 1350 - total flux cleaned = -0.00104878 Jy ! Component: 1400 - total flux cleaned = -0.00110846 Jy ! Component: 1450 - total flux cleaned = -0.00113754 Jy ! Component: 1500 - total flux cleaned = -0.00113776 Jy ! Component: 1550 - total flux cleaned = -0.00116658 Jy ! Component: 1600 - total flux cleaned = -0.00118079 Jy ! Component: 1650 - total flux cleaned = -0.00119492 Jy ! Component: 1700 - total flux cleaned = -0.00122298 Jy ! Component: 1750 - total flux cleaned = -0.00126435 Jy ! Component: 1800 - total flux cleaned = -0.00126424 Jy ! Component: 1850 - total flux cleaned = -0.00126414 Jy ! Component: 1900 - total flux cleaned = -0.00127757 Jy ! Component: 1950 - total flux cleaned = -0.00130414 Jy ! Component: 2000 - total flux cleaned = -0.00126443 Jy ! Component: 2050 - total flux cleaned = -0.00131687 Jy ! Component: 2100 - total flux cleaned = -0.00126489 Jy ! Component: 2150 - total flux cleaned = -0.00129077 Jy ! Component: 2200 - total flux cleaned = -0.00129097 Jy ! Component: 2250 - total flux cleaned = -0.0013416 Jy ! Component: 2300 - total flux cleaned = -0.00136667 Jy ! Component: 2350 - total flux cleaned = -0.00137914 Jy ! Component: 2400 - total flux cleaned = -0.00140365 Jy ! Component: 2450 - total flux cleaned = -0.00141596 Jy ! Component: 2500 - total flux cleaned = -0.0014281 Jy ! Component: 2550 - total flux cleaned = -0.00139199 Jy ! Component: 2600 - total flux cleaned = -0.00138001 Jy ! Component: 2650 - total flux cleaned = -0.00141558 Jy ! Component: 2700 - total flux cleaned = -0.00138019 Jy ! Component: 2750 - total flux cleaned = -0.00143853 Jy ! Component: 2800 - total flux cleaned = -0.00143845 Jy ! Component: 2850 - total flux cleaned = -0.00144982 Jy ! Component: 2900 - total flux cleaned = -0.0014269 Jy ! Component: 2950 - total flux cleaned = -0.00142695 Jy ! Component: 3000 - total flux cleaned = -0.00140458 Jy ! Component: 3050 - total flux cleaned = -0.00140462 Jy ! Component: 3100 - total flux cleaned = -0.00138246 Jy ! Component: 3150 - total flux cleaned = -0.00141556 Jy ! Component: 3200 - total flux cleaned = -0.00141536 Jy ! Component: 3250 - total flux cleaned = -0.00135002 Jy ! Component: 3300 - total flux cleaned = -0.00140401 Jy ! Component: 3350 - total flux cleaned = -0.00137165 Jy ! Component: 3400 - total flux cleaned = -0.0014037 Jy ! Component: 3450 - total flux cleaned = -0.00137174 Jy ! Component: 3500 - total flux cleaned = -0.00138233 Jy ! Component: 3550 - total flux cleaned = -0.0013509 Jy ! Component: 3600 - total flux cleaned = -0.00131955 Jy ! Component: 3650 - total flux cleaned = -0.00131951 Jy ! Component: 3700 - total flux cleaned = -0.00128872 Jy ! Component: 3750 - total flux cleaned = -0.00130916 Jy ! Component: 3800 - total flux cleaned = -0.00134973 Jy ! Component: 3850 - total flux cleaned = -0.00129923 Jy ! Component: 3900 - total flux cleaned = -0.00131936 Jy ! Component: 3950 - total flux cleaned = -0.00135928 Jy ! Component: 4000 - total flux cleaned = -0.00130971 Jy ! Component: 4050 - total flux cleaned = -0.00135914 Jy ! Total flux subtracted in 4096 components = -0.00135912 Jy ! Clean residual min=-0.000590 max=0.000550 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.0767941 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 334 components and 0.076794 Jy ![Exited script file: muppet] wmap "J0927+5717_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.837 x 4.554 at -9.681 degrees (North through East) ! Clean map min=-0.0012292 max=0.072879 Jy/beam ! Writing clean map to FITS file: J0927+5717_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0728793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174767 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.719411 0.719411 1.43882 2.87764 5.75529 11.5106 23.0212 46.0423 92.0846 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.837 x 4.554 at -9.681 degrees (North through East) ! Clean map min=-0.0012292 max=0.072879 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0927+5717_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:19:33 2017