! Started logfile: J0925+3127_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:22:54 2017 obs J0925+3127_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0925+3127_S_2014_01_04_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0925+3127 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0925+3127_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.830766Jy sigma=0.012388 ! Fit after self-cal, rms=0.812172Jy sigma=0.012125 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=4.452 mas, bpa=36.15 degrees ! Estimated noise=817.734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137238 Jy ! Component: 100 - total flux cleaned = 0.173122 Jy ! Total flux subtracted in 100 components = 0.173122 Jy ! Clean residual min=-0.011099 max=0.019150 Jy/beam ! Clean residual mean=0.000019 rms=0.003259 Jy/beam ! Combined flux in latest and established models = 0.173122 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.173122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087240Jy sigma=0.001107 ! Fit after self-cal, rms=0.087158Jy sigma=0.001106 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.801 mas, bmaj=5.144 mas, bpa=31.73 degrees ! Estimated noise=511.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269235 Jy ! Component: 100 - total flux cleaned = 0.0432344 Jy ! Component: 150 - total flux cleaned = 0.0553744 Jy ! Component: 200 - total flux cleaned = 0.0648588 Jy ! Total flux subtracted in 200 components = 0.0648588 Jy ! Clean residual min=-0.008960 max=0.009942 Jy/beam ! Clean residual mean=0.000017 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.237981 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 64 components and 0.237981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074966Jy sigma=0.000973 ! Fit after self-cal, rms=0.074570Jy sigma=0.000969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.76 KP 1.00* LA 1.00 ! MK 0.97 NL 0.94 OV 0.98 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.92 KP 1.00* LA 0.99 ! MK 0.99 NL 0.99 OV 0.99 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 KP 1.00* LA 0.80 ! MK 1.05 NL 0.97 OV 0.93 PT 0.93 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.86 KP 1.00* LA 0.86 ! MK 1.02 NL 1.08 OV 1.00 PT 0.98 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.074570Jy sigma=0.000969 ! Fit after self-cal, rms=0.066620Jy sigma=0.000913 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.864 mas, bmaj=5.201 mas, bpa=24.76 degrees ! Estimated noise=502.126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00752092 Jy ! Component: 100 - total flux cleaned = 0.0113484 Jy ! Component: 150 - total flux cleaned = 0.0138858 Jy ! Component: 200 - total flux cleaned = 0.0157383 Jy ! Total flux subtracted in 200 components = 0.0157383 Jy ! Clean residual min=-0.003524 max=0.003503 Jy/beam ! Clean residual mean=-0.000006 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.253719 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.253719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065770Jy sigma=0.000900 ! Fit after self-cal, rms=0.065429Jy sigma=0.000898 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065429Jy sigma=0.000898 ! Fit after self-cal, rms=0.065238Jy sigma=0.000896 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.867 mas, bmaj=5.161 mas, bpa=22.24 degrees ! Estimated noise=500.897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224575 Jy ! Component: 100 - total flux cleaned = 0.00327021 Jy ! Component: 150 - total flux cleaned = 0.00358635 Jy ! Component: 200 - total flux cleaned = 0.00381737 Jy ! Total flux subtracted in 200 components = 0.00381737 Jy ! Clean residual min=-0.002320 max=0.002652 Jy/beam ! Clean residual mean=-0.000006 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.257536 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.257536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065131Jy sigma=0.000895 ! Fit after self-cal, rms=0.065121Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896253 Jy ! Component: 100 - total flux cleaned = 0.00112989 Jy ! Component: 150 - total flux cleaned = 0.00127595 Jy ! Component: 200 - total flux cleaned = 0.00130228 Jy ! Total flux subtracted in 200 components = 0.00130228 Jy ! Clean residual min=-0.002235 max=0.002623 Jy/beam ! Clean residual mean=-0.000006 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.258839 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.258839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065089Jy sigma=0.000894 ! Fit after self-cal, rms=0.065088Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065088Jy sigma=0.000894 ! Fit after self-cal, rms=0.065038Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.864 mas, bmaj=5.152 mas, bpa=21.63 degrees ! Estimated noise=500.613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091729 Jy ! Component: 100 - total flux cleaned = 0.00138418 Jy ! Component: 150 - total flux cleaned = 0.00164622 Jy ! Component: 200 - total flux cleaned = 0.00176949 Jy ! Total flux subtracted in 200 components = 0.00176949 Jy ! Clean residual min=-0.002254 max=0.002468 Jy/beam ! Clean residual mean=-0.000003 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.260608 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 137 components and 0.260608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065014Jy sigma=0.000894 ! Fit after self-cal, rms=0.065012Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443639 Jy ! Component: 100 - total flux cleaned = 0.000520135 Jy ! Component: 150 - total flux cleaned = 0.000588108 Jy ! Component: 200 - total flux cleaned = 0.000651754 Jy ! Total flux subtracted in 200 components = 0.000651754 Jy ! Clean residual min=-0.002245 max=0.002471 Jy/beam ! Clean residual mean=-0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.26126 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 155 components and 0.26126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065002Jy sigma=0.000893 ! Fit after self-cal, rms=0.065002Jy sigma=0.000893 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065002Jy sigma=0.000893 ! Fit after self-cal, rms=0.064983Jy sigma=0.000893 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.497 mas, bmaj=10.31 mas, bpa=24.85 degrees ! Estimated noise=572.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000911927 Jy ! Component: 100 - total flux cleaned = 0.00148247 Jy ! Component: 150 - total flux cleaned = 0.0017031 Jy ! Component: 200 - total flux cleaned = 0.0018039 Jy ! Total flux subtracted in 200 components = 0.0018039 Jy ! Clean residual min=-0.002564 max=0.003223 Jy/beam ! Clean residual mean=-0.000003 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.263064 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 178 components and 0.263064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064979Jy sigma=0.000893 ! Fit after self-cal, rms=0.064976Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027437 Jy ! Component: 100 - total flux cleaned = 0.000406483 Jy ! Component: 150 - total flux cleaned = 0.000482802 Jy ! Component: 200 - total flux cleaned = 0.000518918 Jy ! Total flux subtracted in 200 components = 0.000518918 Jy ! Clean residual min=-0.002564 max=0.003267 Jy/beam ! Clean residual mean=-0.000002 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.263583 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 197 components and 0.263583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064974Jy sigma=0.000893 ! Fit after self-cal, rms=0.064973Jy sigma=0.000893 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.862 mas, bmaj=5.151 mas, bpa=21.72 degrees ! Estimated noise=500.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.862 x 5.151 at 21.72 degrees (North through East) ! Clean map min=-0.0022936 max=0.17009 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.81 mas, bmaj=4.405 mas, bpa=32.93 degrees ! Estimated noise=808.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135611 Jy ! Component: 100 - total flux cleaned = 0.171158 Jy ! Component: 150 - total flux cleaned = 0.187971 Jy ! Component: 200 - total flux cleaned = 0.198397 Jy ! Total flux subtracted in 200 components = 0.198397 Jy ! Clean residual min=-0.005202 max=0.006434 Jy/beam ! Clean residual mean=0.000007 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.198397 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.198397 Jy ! Inverting map and beam ! Estimated beam: bmin=4.862 mas, bmaj=5.151 mas, bpa=21.72 degrees ! Estimated noise=500.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123657 Jy ! Component: 100 - total flux cleaned = 0.0212904 Jy ! Component: 150 - total flux cleaned = 0.0282351 Jy ! Component: 200 - total flux cleaned = 0.0338476 Jy ! Total flux subtracted in 200 components = 0.0338476 Jy ! Clean residual min=-0.004241 max=0.004528 Jy/beam ! Clean residual mean=0.000002 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.232245 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 114 components and 0.232245 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.497 mas, bmaj=10.31 mas, bpa=24.85 degrees ! Estimated noise=572.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745334 Jy ! Component: 100 - total flux cleaned = 0.0128841 Jy ! Component: 150 - total flux cleaned = 0.0169764 Jy ! Component: 200 - total flux cleaned = 0.0201223 Jy ! Total flux subtracted in 200 components = 0.0201223 Jy ! Clean residual min=-0.003428 max=0.003013 Jy/beam ! Clean residual mean=-0.000002 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.252367 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245177 Jy ! Component: 100 - total flux cleaned = 0.00437608 Jy ! Component: 150 - total flux cleaned = 0.00589324 Jy ! Component: 200 - total flux cleaned = 0.00709275 Jy ! Total flux subtracted in 200 components = 0.00709275 Jy ! Clean residual min=-0.002853 max=0.003234 Jy/beam ! Clean residual mean=-0.000002 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.25946 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 200 components and 0.25946 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.862 mas, bmaj=5.151 mas, bpa=21.72 degrees ! Estimated noise=500.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152963 Jy ! Component: 100 - total flux cleaned = 0.00209779 Jy ! Component: 150 - total flux cleaned = 0.00236352 Jy ! Component: 200 - total flux cleaned = 0.00252027 Jy ! Total flux subtracted in 200 components = 0.00252027 Jy ! Clean residual min=-0.002353 max=0.003000 Jy/beam ! Clean residual mean=-0.000001 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.26198 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 222 components and 0.26198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065028Jy sigma=0.000894 ! Fit after self-cal, rms=0.065021Jy sigma=0.000893 wmodel J0925+3127_S_2014_01_04_pus_map.mod ! Writing 222 model components to file: J0925+3127_S_2014_01_04_pus_map.mod wobs J0925+3127_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0925+3127_S_2014_01_04_pus_uvs.fits wwins J0925+3127_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0925+3127_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622569 Jy ! Component: 100 - total flux cleaned = 0.000624523 Jy ! Component: 150 - total flux cleaned = 0.000624392 Jy ! Component: 200 - total flux cleaned = 0.000590051 Jy ! Component: 250 - total flux cleaned = 0.000526767 Jy ! Component: 300 - total flux cleaned = 0.000468918 Jy ! Component: 350 - total flux cleaned = 0.000358379 Jy ! Component: 400 - total flux cleaned = 0.000149206 Jy ! Component: 450 - total flux cleaned = 7.48956e-05 Jy ! Component: 500 - total flux cleaned = 4.16563e-06 Jy ! Component: 550 - total flux cleaned = -8.57231e-05 Jy ! Component: 600 - total flux cleaned = -8.5093e-05 Jy ! Component: 650 - total flux cleaned = -2.20331e-05 Jy ! Component: 700 - total flux cleaned = 1.87758e-05 Jy ! Component: 750 - total flux cleaned = -1.2793e-06 Jy ! Component: 800 - total flux cleaned = -1.77577e-06 Jy ! Component: 850 - total flux cleaned = -3.92122e-05 Jy ! Component: 900 - total flux cleaned = -3.92109e-05 Jy ! Component: 950 - total flux cleaned = -2.15371e-05 Jy ! Component: 1000 - total flux cleaned = -5.61225e-05 Jy ! Component: 1050 - total flux cleaned = -7.29075e-05 Jy ! Component: 1100 - total flux cleaned = -0.000105644 Jy ! Component: 1150 - total flux cleaned = -8.95951e-05 Jy ! Component: 1200 - total flux cleaned = -4.32723e-05 Jy ! Component: 1250 - total flux cleaned = -7.44625e-05 Jy ! Component: 1300 - total flux cleaned = -8.96138e-05 Jy ! Component: 1350 - total flux cleaned = -8.95572e-05 Jy ! Component: 1400 - total flux cleaned = -0.000118404 Jy ! Component: 1450 - total flux cleaned = -0.000118241 Jy ! Component: 1500 - total flux cleaned = -0.000118236 Jy ! Component: 1550 - total flux cleaned = -0.000104796 Jy ! Component: 1600 - total flux cleaned = -0.000158501 Jy ! Component: 1650 - total flux cleaned = -0.00011903 Jy ! Component: 1700 - total flux cleaned = -0.000105911 Jy ! Component: 1750 - total flux cleaned = -9.31048e-05 Jy ! Component: 1800 - total flux cleaned = -0.000118237 Jy ! Component: 1850 - total flux cleaned = -0.000105796 Jy ! Component: 1900 - total flux cleaned = -0.00011802 Jy ! Component: 1950 - total flux cleaned = -0.000117981 Jy ! Component: 2000 - total flux cleaned = -0.000118242 Jy ! Component: 2050 - total flux cleaned = -0.00013019 Jy ! Component: 2100 - total flux cleaned = -8.40029e-05 Jy ! Component: 2150 - total flux cleaned = -0.000141402 Jy ! Component: 2200 - total flux cleaned = -0.00014138 Jy ! Component: 2250 - total flux cleaned = -0.000152473 Jy ! Component: 2300 - total flux cleaned = -0.000196656 Jy ! Component: 2350 - total flux cleaned = -0.000229415 Jy ! Component: 2400 - total flux cleaned = -0.000251107 Jy ! Component: 2450 - total flux cleaned = -0.000304568 Jy ! Component: 2500 - total flux cleaned = -0.000368163 Jy ! Component: 2550 - total flux cleaned = -0.000410175 Jy ! Component: 2600 - total flux cleaned = -0.000483207 Jy ! Component: 2650 - total flux cleaned = -0.00053504 Jy ! Component: 2700 - total flux cleaned = -0.000607035 Jy ! Component: 2750 - total flux cleaned = -0.000658089 Jy ! Component: 2800 - total flux cleaned = -0.000729171 Jy ! Component: 2850 - total flux cleaned = -0.00079992 Jy ! Component: 2900 - total flux cleaned = -0.000900267 Jy ! Component: 2950 - total flux cleaned = -0.000960145 Jy ! Component: 3000 - total flux cleaned = -0.00102969 Jy ! Component: 3050 - total flux cleaned = -0.00106919 Jy ! Component: 3100 - total flux cleaned = -0.00112824 Jy ! Component: 3150 - total flux cleaned = -0.00118705 Jy ! Component: 3200 - total flux cleaned = -0.00124548 Jy ! Component: 3250 - total flux cleaned = -0.00130368 Jy ! Component: 3300 - total flux cleaned = -0.00138084 Jy ! Component: 3350 - total flux cleaned = -0.00144803 Jy ! Component: 3400 - total flux cleaned = -0.00150542 Jy ! Component: 3450 - total flux cleaned = -0.00157209 Jy ! Component: 3500 - total flux cleaned = -0.00163847 Jy ! Component: 3550 - total flux cleaned = -0.00168566 Jy ! Component: 3600 - total flux cleaned = -0.0017515 Jy ! Component: 3650 - total flux cleaned = -0.00179836 Jy ! Component: 3700 - total flux cleaned = -0.00183578 Jy ! Component: 3750 - total flux cleaned = -0.00186378 Jy ! Component: 3800 - total flux cleaned = -0.0019289 Jy ! Component: 3850 - total flux cleaned = -0.00197524 Jy ! Component: 3900 - total flux cleaned = -0.00202153 Jy ! Component: 3950 - total flux cleaned = -0.00207694 Jy ! Component: 4000 - total flux cleaned = -0.00212311 Jy ! Component: 4050 - total flux cleaned = -0.00218758 Jy ! Total flux subtracted in 4096 components = -0.00221517 Jy ! Clean residual min=-0.000574 max=0.000584 Jy/beam ! Clean residual mean=-0.000000 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.259765 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 455 components and 0.259765 Jy ![Exited script file: muppet] wmap "J0925+3127_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.862 x 5.151 at 21.72 degrees (North through East) ! Clean map min=-0.0013014 max=0.17399 Jy/beam ! Writing clean map to FITS file: J0925+3127_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173985 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000150564 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259615 0.259615 0.51923 1.03846 2.07692 4.15384 8.30767 16.6153 33.2307 66.4614 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.173 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.862 x 5.151 at 21.72 degrees (North through East) ! Clean map min=-0.0013014 max=0.17399 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0925+3127_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:22:59 2017