! Started logfile: J0923+3849_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:22:49 2017 obs J0923+3849_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0923+3849_S_2014_01_04_pus_uva.fits ! AN table 1: 80 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0923+3849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4960 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0923+3849_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 250 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.733050Jy sigma=0.011009 ! Fit after self-cal, rms=0.722310Jy sigma=0.010881 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.779 mas, bmaj=4.463 mas, bpa=-85.56 degrees ! Estimated noise=1048.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204932 Jy ! Component: 100 - total flux cleaned = 0.260386 Jy ! Total flux subtracted in 100 components = 0.260386 Jy ! Clean residual min=-0.014265 max=0.021384 Jy/beam ! Clean residual mean=0.000189 rms=0.003924 Jy/beam ! Combined flux in latest and established models = 0.260386 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.260386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108722Jy sigma=0.001398 ! Fit after self-cal, rms=0.108683Jy sigma=0.001397 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.84 mas, bmaj=5.466 mas, bpa=89 degrees ! Estimated noise=718.291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305914 Jy ! Component: 100 - total flux cleaned = 0.0453961 Jy ! Component: 150 - total flux cleaned = 0.0541638 Jy ! Component: 200 - total flux cleaned = 0.0596391 Jy ! Total flux subtracted in 200 components = 0.0596391 Jy ! Clean residual min=-0.009721 max=0.016061 Jy/beam ! Clean residual mean=0.000294 rms=0.003135 Jy/beam ! Combined flux in latest and established models = 0.320026 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.320025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098122Jy sigma=0.001297 ! Fit after self-cal, rms=0.097964Jy sigma=0.001295 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.86 KP 1.00* LA 1.00 ! MK 1.01 NL 0.93 OV 0.93 PT 0.99 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 KP 1.00* LA 0.97 ! MK 0.97 NL 1.00 OV 0.98 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.15 KP 1.00* LA 0.80 ! MK 0.98 NL 1.00 OV 0.90 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.03 KP 1.00* LA 0.87 ! MK 1.02 NL 1.07 OV 0.98 PT 0.98 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.097964Jy sigma=0.001295 ! Fit after self-cal, rms=0.087427Jy sigma=0.001192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.864 mas, bmaj=5.45 mas, bpa=85.25 degrees ! Estimated noise=717.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691994 Jy ! Component: 100 - total flux cleaned = 0.00777222 Jy ! Component: 150 - total flux cleaned = 0.0080981 Jy ! Component: 200 - total flux cleaned = 0.00883299 Jy ! Total flux subtracted in 200 components = 0.00883299 Jy ! Clean residual min=-0.006074 max=0.005682 Jy/beam ! Clean residual mean=-0.000013 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.328858 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 0.328858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086133Jy sigma=0.001174 ! Fit after self-cal, rms=0.085732Jy sigma=0.001173 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085732Jy sigma=0.001173 ! Fit after self-cal, rms=0.083917Jy sigma=0.001143 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.85 mas, bmaj=5.489 mas, bpa=86.5 degrees ! Estimated noise=715.275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321949 Jy ! Component: 100 - total flux cleaned = 0.00341397 Jy ! Component: 150 - total flux cleaned = 0.00333721 Jy ! Component: 200 - total flux cleaned = 0.00333519 Jy ! Total flux subtracted in 200 components = 0.00333519 Jy ! Clean residual min=-0.004041 max=0.003616 Jy/beam ! Clean residual mean=0.000046 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.332194 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.332194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083655Jy sigma=0.001140 ! Fit after self-cal, rms=0.083621Jy sigma=0.001139 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437043 Jy ! Component: 100 - total flux cleaned = 0.000733609 Jy ! Component: 150 - total flux cleaned = 0.000733522 Jy ! Component: 200 - total flux cleaned = 0.000783893 Jy ! Total flux subtracted in 200 components = 0.000783893 Jy ! Clean residual min=-0.003684 max=0.003076 Jy/beam ! Clean residual mean=0.000045 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.332978 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.332978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083541Jy sigma=0.001138 ! Fit after self-cal, rms=0.083533Jy sigma=0.001138 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083533Jy sigma=0.001138 ! Fit after self-cal, rms=0.083681Jy sigma=0.001138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.855 mas, bmaj=5.499 mas, bpa=86.24 degrees ! Estimated noise=714.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590773 Jy ! Component: 100 - total flux cleaned = 0.000543699 Jy ! Component: 150 - total flux cleaned = 0.000544959 Jy ! Component: 200 - total flux cleaned = 0.000545015 Jy ! Total flux subtracted in 200 components = 0.000545015 Jy ! Clean residual min=-0.003137 max=0.002852 Jy/beam ! Clean residual mean=0.000060 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.333523 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.333522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083613Jy sigma=0.001137 ! Fit after self-cal, rms=0.083608Jy sigma=0.001137 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368898 Jy ! Component: 100 - total flux cleaned = 0.000411942 Jy ! Component: 150 - total flux cleaned = 0.000373577 Jy ! Component: 200 - total flux cleaned = 0.000409711 Jy ! Total flux subtracted in 200 components = 0.000409711 Jy ! Clean residual min=-0.002961 max=0.002644 Jy/beam ! Clean residual mean=0.000058 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.333932 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.333932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083571Jy sigma=0.001136 ! Fit after self-cal, rms=0.083568Jy sigma=0.001136 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083568Jy sigma=0.001136 ! Fit after self-cal, rms=0.083675Jy sigma=0.001136 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.83 mas, bmaj=9.573 mas, bpa=52.14 degrees ! Estimated noise=808.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238287 Jy ! Component: 100 - total flux cleaned = -0.00035605 Jy ! Component: 150 - total flux cleaned = -0.000324931 Jy ! Component: 200 - total flux cleaned = -0.00026621 Jy ! Total flux subtracted in 200 components = -0.00026621 Jy ! Clean residual min=-0.002708 max=0.002372 Jy/beam ! Clean residual mean=0.000110 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.333666 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 109 components and 0.333666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083664Jy sigma=0.001136 ! Fit after self-cal, rms=0.083664Jy sigma=0.001136 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269089 Jy ! Component: 100 - total flux cleaned = 0.000245344 Jy ! Component: 150 - total flux cleaned = 0.000268687 Jy ! Component: 200 - total flux cleaned = 0.000267785 Jy ! Total flux subtracted in 200 components = 0.000267785 Jy ! Clean residual min=-0.002595 max=0.002293 Jy/beam ! Clean residual mean=0.000107 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.333934 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.333934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083659Jy sigma=0.001135 ! Fit after self-cal, rms=0.083661Jy sigma=0.001135 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.858 mas, bmaj=5.509 mas, bpa=86.05 degrees ! Estimated noise=714.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.858 x 5.509 at 86.05 degrees (North through East) ! Clean map min=-0.0036198 max=0.27015 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.765 mas, bmaj=4.468 mas, bpa=-86.38 degrees ! Estimated noise=1044.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204013 Jy ! Component: 100 - total flux cleaned = 0.259338 Jy ! Component: 150 - total flux cleaned = 0.28268 Jy ! Component: 200 - total flux cleaned = 0.296603 Jy ! Total flux subtracted in 200 components = 0.296603 Jy ! Clean residual min=-0.007739 max=0.007603 Jy/beam ! Clean residual mean=0.000087 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.296603 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.296603 Jy ! Inverting map and beam ! Estimated beam: bmin=4.858 mas, bmaj=5.509 mas, bpa=86.05 degrees ! Estimated noise=714.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127881 Jy ! Component: 100 - total flux cleaned = 0.0204166 Jy ! Component: 150 - total flux cleaned = 0.025615 Jy ! Component: 200 - total flux cleaned = 0.0282579 Jy ! Total flux subtracted in 200 components = 0.0282579 Jy ! Clean residual min=-0.004172 max=0.004248 Jy/beam ! Clean residual mean=0.000115 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.324861 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 70 components and 0.324861 Jy ! Inverting map ! Added new window around map position (4, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303023 Jy ! Component: 100 - total flux cleaned = 0.00416237 Jy ! Component: 150 - total flux cleaned = 0.00504792 Jy ! Component: 200 - total flux cleaned = 0.00575084 Jy ! Total flux subtracted in 200 components = 0.00575084 Jy ! Clean residual min=-0.003592 max=0.003014 Jy/beam ! Clean residual mean=0.000080 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.330611 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 88 components and 0.330611 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.83 mas, bmaj=9.573 mas, bpa=52.14 degrees ! Estimated noise=808.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202189 Jy ! Component: 100 - total flux cleaned = 0.0026202 Jy ! Component: 150 - total flux cleaned = 0.0031619 Jy ! Component: 200 - total flux cleaned = 0.00360505 Jy ! Total flux subtracted in 200 components = 0.00360505 Jy ! Clean residual min=-0.002897 max=0.002452 Jy/beam ! Clean residual mean=0.000106 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.334216 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314403 Jy ! Component: 100 - total flux cleaned = 0.000533251 Jy ! Component: 150 - total flux cleaned = 0.000657291 Jy ! Component: 200 - total flux cleaned = 0.00077328 Jy ! Total flux subtracted in 200 components = 0.00077328 Jy ! Clean residual min=-0.002806 max=0.002470 Jy/beam ! Clean residual mean=0.000097 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.33499 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 119 components and 0.33499 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.858 mas, bmaj=5.509 mas, bpa=86.05 degrees ! Estimated noise=714.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561509 Jy ! Component: 100 - total flux cleaned = -0.000316807 Jy ! Component: 150 - total flux cleaned = -0.000314257 Jy ! Component: 200 - total flux cleaned = -0.000411066 Jy ! Total flux subtracted in 200 components = -0.000411066 Jy ! Clean residual min=-0.002939 max=0.002880 Jy/beam ! Clean residual mean=0.000056 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.334579 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 136 components and 0.334579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083620Jy sigma=0.001135 ! Fit after self-cal, rms=0.083593Jy sigma=0.001135 wmodel J0923+3849_S_2014_01_04_pus_map.mod ! Writing 136 model components to file: J0923+3849_S_2014_01_04_pus_map.mod wobs J0923+3849_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0923+3849_S_2014_01_04_pus_uvs.fits wwins J0923+3849_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0923+3849_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214133 Jy ! Component: 100 - total flux cleaned = 9.369e-05 Jy ! Component: 150 - total flux cleaned = 0.000293687 Jy ! Component: 200 - total flux cleaned = 0.000712384 Jy ! Component: 250 - total flux cleaned = 0.000968756 Jy ! Component: 300 - total flux cleaned = 0.00103953 Jy ! Component: 350 - total flux cleaned = 0.00117794 Jy ! Component: 400 - total flux cleaned = 0.00131231 Jy ! Component: 450 - total flux cleaned = 0.00141102 Jy ! Component: 500 - total flux cleaned = 0.00137901 Jy ! Component: 550 - total flux cleaned = 0.00137853 Jy ! Component: 600 - total flux cleaned = 0.00128613 Jy ! Component: 650 - total flux cleaned = 0.00131691 Jy ! Component: 700 - total flux cleaned = 0.00140607 Jy ! Component: 750 - total flux cleaned = 0.00137689 Jy ! Component: 800 - total flux cleaned = 0.00140627 Jy ! Component: 850 - total flux cleaned = 0.00149185 Jy ! Component: 900 - total flux cleaned = 0.00160326 Jy ! Component: 950 - total flux cleaned = 0.00165807 Jy ! Component: 1000 - total flux cleaned = 0.00173914 Jy ! Component: 1050 - total flux cleaned = 0.00181864 Jy ! Component: 1100 - total flux cleaned = 0.00184492 Jy ! Component: 1150 - total flux cleaned = 0.00192247 Jy ! Component: 1200 - total flux cleaned = 0.0019483 Jy ! Component: 1250 - total flux cleaned = 0.00199855 Jy ! Component: 1300 - total flux cleaned = 0.00202321 Jy ! Component: 1350 - total flux cleaned = 0.00207214 Jy ! Component: 1400 - total flux cleaned = 0.00216816 Jy ! Component: 1450 - total flux cleaned = 0.00223918 Jy ! Component: 1500 - total flux cleaned = 0.00233307 Jy ! Component: 1550 - total flux cleaned = 0.00235653 Jy ! Component: 1600 - total flux cleaned = 0.00244835 Jy ! Component: 1650 - total flux cleaned = 0.00247099 Jy ! Component: 1700 - total flux cleaned = 0.00251593 Jy ! Component: 1750 - total flux cleaned = 0.00262728 Jy ! Component: 1800 - total flux cleaned = 0.00271508 Jy ! Component: 1850 - total flux cleaned = 0.00275859 Jy ! Component: 1900 - total flux cleaned = 0.00275877 Jy ! Component: 1950 - total flux cleaned = 0.00288686 Jy ! Component: 2000 - total flux cleaned = 0.00292907 Jy ! Component: 2050 - total flux cleaned = 0.00301308 Jy ! Component: 2100 - total flux cleaned = 0.00305464 Jy ! Component: 2150 - total flux cleaned = 0.00307537 Jy ! Component: 2200 - total flux cleaned = 0.00315735 Jy ! Component: 2250 - total flux cleaned = 0.00319804 Jy ! Component: 2300 - total flux cleaned = 0.00325839 Jy ! Component: 2350 - total flux cleaned = 0.00325847 Jy ! Component: 2400 - total flux cleaned = 0.00329834 Jy ! Component: 2450 - total flux cleaned = 0.00341688 Jy ! Component: 2500 - total flux cleaned = 0.00339733 Jy ! Component: 2550 - total flux cleaned = 0.00349487 Jy ! Component: 2600 - total flux cleaned = 0.00343682 Jy ! Component: 2650 - total flux cleaned = 0.0035141 Jy ! Component: 2700 - total flux cleaned = 0.00355247 Jy ! Component: 2750 - total flux cleaned = 0.00353343 Jy ! Component: 2800 - total flux cleaned = 0.00353345 Jy ! Component: 2850 - total flux cleaned = 0.00358992 Jy ! Component: 2900 - total flux cleaned = 0.00360858 Jy ! Component: 2950 - total flux cleaned = 0.00360875 Jy ! Component: 3000 - total flux cleaned = 0.00368317 Jy ! Component: 3050 - total flux cleaned = 0.00370169 Jy ! Component: 3100 - total flux cleaned = 0.00377522 Jy ! Component: 3150 - total flux cleaned = 0.00379352 Jy ! Component: 3200 - total flux cleaned = 0.0038847 Jy ! Component: 3250 - total flux cleaned = 0.00390291 Jy ! Component: 3300 - total flux cleaned = 0.00393911 Jy ! Component: 3350 - total flux cleaned = 0.00406499 Jy ! Component: 3400 - total flux cleaned = 0.00408291 Jy ! Component: 3450 - total flux cleaned = 0.00413653 Jy ! Component: 3500 - total flux cleaned = 0.00424322 Jy ! Component: 3550 - total flux cleaned = 0.00429617 Jy ! Component: 3600 - total flux cleaned = 0.00436677 Jy ! Component: 3650 - total flux cleaned = 0.00445462 Jy ! Component: 3700 - total flux cleaned = 0.00452468 Jy ! Component: 3750 - total flux cleaned = 0.00461194 Jy ! Component: 3800 - total flux cleaned = 0.00471626 Jy ! Component: 3850 - total flux cleaned = 0.0047856 Jy ! Component: 3900 - total flux cleaned = 0.00487198 Jy ! Component: 3950 - total flux cleaned = 0.00492359 Jy ! Component: 4000 - total flux cleaned = 0.00502645 Jy ! Component: 4050 - total flux cleaned = 0.00507772 Jy ! Total flux subtracted in 4096 components = 0.00514587 Jy ! Clean residual min=-0.000933 max=0.001026 Jy/beam ! Clean residual mean=0.000025 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.339724 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 366 components and 0.339725 Jy ![Exited script file: muppet] wmap "J0923+3849_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.858 x 5.509 at 86.05 degrees (North through East) ! Clean map min=-0.00247 max=0.27142 Jy/beam ! Writing clean map to FITS file: J0923+3849_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.271424 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000275702 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.304728 0.304728 0.609456 1.21891 2.43782 4.87565 9.7513 19.5026 39.0052 78.0104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.271 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.858 x 5.509 at 86.05 degrees (North through East) ! Clean map min=-0.00247 max=0.27142 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0923+3849_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:22:54 2017