! Started logfile: J0922-3959_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:53:53 2016 obs J0922-3959_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0922-3959_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.417778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0922-3959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1128 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0922-3959_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.419914Jy sigma=0.002520 ! Fit after self-cal, rms=0.410036Jy sigma=0.002455 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=17.49 mas, bpa=-2.773 degrees ! Estimated noise=4103.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.805401 Jy ! Component: 100 - total flux cleaned = 1.03634 Jy ! Total flux subtracted in 100 components = 1.03634 Jy ! Clean residual min=-0.107112 max=0.151496 Jy/beam ! Clean residual mean=-0.000982 rms=0.033477 Jy/beam ! Combined flux in latest and established models = 1.03634 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.03634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385225Jy sigma=0.002297 ! Fit after self-cal, rms=0.385191Jy sigma=0.002297 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=19.11 mas, bpa=-2.273 degrees ! Estimated noise=3429.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206096 Jy ! Component: 100 - total flux cleaned = 0.324412 Jy ! Component: 150 - total flux cleaned = 0.395867 Jy ! Component: 200 - total flux cleaned = 0.44233 Jy ! Total flux subtracted in 200 components = 0.44233 Jy ! Clean residual min=-0.072631 max=0.067101 Jy/beam ! Clean residual mean=-0.001200 rms=0.021195 Jy/beam ! Combined flux in latest and established models = 1.47867 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 67 components and 1.47867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257961Jy sigma=0.001355 ! Fit after self-cal, rms=0.257774Jy sigma=0.001354 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.17 KP 1.03 ! LA 1.03 MK 1.00* NL 0.96 OV 1.00* ! PT 1.05 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.31 KP 1.01 ! LA 0.99 MK 1.00* NL 1.06 OV 1.00* ! PT 1.06 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.27 KP 0.92 ! LA 0.80 MK 1.00* NL 1.17 OV 1.00* ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.18 KP 0.90 ! LA 0.87 MK 1.00* NL 1.08 OV 1.00* ! PT 1.08 SC 0.98 ! ! ! Fit before self-cal, rms=0.257774Jy sigma=0.001354 ! Fit after self-cal, rms=0.195100Jy sigma=0.000927 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=19.86 mas, bpa=-1.805 degrees ! Estimated noise=3437.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0318263 Jy ! Component: 100 - total flux cleaned = -0.0361582 Jy ! Component: 150 - total flux cleaned = -0.0403852 Jy ! Component: 200 - total flux cleaned = -0.0408104 Jy ! Total flux subtracted in 200 components = -0.0408104 Jy ! Clean residual min=-0.031140 max=0.033778 Jy/beam ! Clean residual mean=0.000129 rms=0.009824 Jy/beam ! Combined flux in latest and established models = 1.43786 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 1.43786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185303Jy sigma=0.000894 ! Fit after self-cal, rms=0.185475Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185475Jy sigma=0.000894 ! Fit after self-cal, rms=0.182975Jy sigma=0.000876 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=20.08 mas, bpa=-1.662 degrees ! Estimated noise=3442.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0218985 Jy ! Component: 100 - total flux cleaned = -0.0254536 Jy ! Component: 150 - total flux cleaned = -0.0288813 Jy ! Component: 200 - total flux cleaned = -0.0292133 Jy ! Total flux subtracted in 200 components = -0.0292133 Jy ! Clean residual min=-0.026113 max=0.029622 Jy/beam ! Clean residual mean=0.000140 rms=0.008529 Jy/beam ! Combined flux in latest and established models = 1.40864 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 1.40864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177843Jy sigma=0.000859 ! Fit after self-cal, rms=0.177952Jy sigma=0.000859 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262202 Jy ! Component: 100 - total flux cleaned = 0.000521095 Jy ! Component: 150 - total flux cleaned = 0.000519732 Jy ! Component: 200 - total flux cleaned = 0.000756767 Jy ! Total flux subtracted in 200 components = 0.000756767 Jy ! Clean residual min=-0.025577 max=0.029086 Jy/beam ! Clean residual mean=0.000145 rms=0.008436 Jy/beam ! Combined flux in latest and established models = 1.4094 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 100 components and 1.4094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176856Jy sigma=0.000857 ! Fit after self-cal, rms=0.176870Jy sigma=0.000857 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176870Jy sigma=0.000857 ! Fit after self-cal, rms=0.175444Jy sigma=0.000846 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.908 mas, bmaj=20.28 mas, bpa=-1.539 degrees ! Estimated noise=3446.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0170887 Jy ! Component: 100 - total flux cleaned = -0.0189184 Jy ! Component: 150 - total flux cleaned = -0.0212766 Jy ! Component: 200 - total flux cleaned = -0.0221453 Jy ! Total flux subtracted in 200 components = -0.0221453 Jy ! Clean residual min=-0.023056 max=0.027076 Jy/beam ! Clean residual mean=0.000165 rms=0.007565 Jy/beam ! Combined flux in latest and established models = 1.38726 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 101 components and 1.38726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172599Jy sigma=0.000837 ! Fit after self-cal, rms=0.172689Jy sigma=0.000837 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.53903e-06 Jy ! Component: 100 - total flux cleaned = 0.000169017 Jy ! Component: 150 - total flux cleaned = 0.000172681 Jy ! Component: 200 - total flux cleaned = 0.000336989 Jy ! Total flux subtracted in 200 components = 0.000336989 Jy ! Clean residual min=-0.023064 max=0.026740 Jy/beam ! Clean residual mean=0.000167 rms=0.007521 Jy/beam ! Combined flux in latest and established models = 1.38759 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 103 components and 1.38759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172125Jy sigma=0.000836 ! Fit after self-cal, rms=0.172134Jy sigma=0.000836 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172134Jy sigma=0.000836 ! Fit after self-cal, rms=0.171442Jy sigma=0.000829 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.72 mas, bmaj=25.17 mas, bpa=-8.286 degrees ! Estimated noise=4017.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0106677 Jy ! Component: 100 - total flux cleaned = -0.011146 Jy ! Component: 150 - total flux cleaned = -0.0109319 Jy ! Component: 200 - total flux cleaned = -0.0107441 Jy ! Total flux subtracted in 200 components = -0.0107441 Jy ! Clean residual min=-0.027828 max=0.029034 Jy/beam ! Clean residual mean=0.000368 rms=0.010173 Jy/beam ! Combined flux in latest and established models = 1.37685 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 110 components and 1.37685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169783Jy sigma=0.000830 ! Fit after self-cal, rms=0.169837Jy sigma=0.000830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418354 Jy ! Component: 100 - total flux cleaned = 0.000614767 Jy ! Component: 150 - total flux cleaned = 0.000976199 Jy ! Component: 200 - total flux cleaned = 0.00115868 Jy ! Total flux subtracted in 200 components = 0.00115868 Jy ! Clean residual min=-0.027277 max=0.029140 Jy/beam ! Clean residual mean=0.000382 rms=0.010089 Jy/beam ! Combined flux in latest and established models = 1.37801 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 111 components and 1.37801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169460Jy sigma=0.000834 ! Fit after self-cal, rms=0.169459Jy sigma=0.000834 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=20.43 mas, bpa=-1.445 degrees ! Estimated noise=3447.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 20.43 at -1.445 degrees (North through East) ! Clean map min=-0.021275 max=1.1134 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169459Jy sigma=0.000834 ! Fit after self-cal, rms=0.160029Jy sigma=0.000751 ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=20.5 mas, bpa=-1.363 degrees ! Estimated noise=3434.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0125384 Jy ! Component: 100 - total flux cleaned = -0.0165818 Jy ! Component: 150 - total flux cleaned = -0.017061 Jy ! Component: 200 - total flux cleaned = -0.0170649 Jy ! Total flux subtracted in 200 components = -0.0170649 Jy ! Clean residual min=-0.020373 max=0.025030 Jy/beam ! Clean residual mean=0.000165 rms=0.006754 Jy/beam ! Combined flux in latest and established models = 1.36094 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 1.36094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158707Jy sigma=0.000744 ! Fit after self-cal, rms=0.158711Jy sigma=0.000744 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111513 Jy ! Component: 100 - total flux cleaned = 0.000218918 Jy ! Component: 150 - total flux cleaned = 0.000420374 Jy ! Component: 200 - total flux cleaned = 0.000605909 Jy ! Total flux subtracted in 200 components = 0.000605909 Jy ! Clean residual min=-0.020507 max=0.024688 Jy/beam ! Clean residual mean=0.000165 rms=0.006714 Jy/beam ! Combined flux in latest and established models = 1.36155 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 128 components and 1.36155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158738Jy sigma=0.000742 ! Fit after self-cal, rms=0.158738Jy sigma=0.000742 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158738Jy sigma=0.000742 ! Fit after self-cal, rms=0.158757Jy sigma=0.000739 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=18.6 mas, bpa=-1.562 degrees ! Estimated noise=4264.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.836983 Jy ! Component: 100 - total flux cleaned = 1.03118 Jy ! Component: 150 - total flux cleaned = 1.12488 Jy ! Component: 200 - total flux cleaned = 1.18787 Jy ! Total flux subtracted in 200 components = 1.18787 Jy ! Clean residual min=-0.029903 max=0.047761 Jy/beam ! Clean residual mean=-0.000170 rms=0.010733 Jy/beam ! Combined flux in latest and established models = 1.18787 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 1.18787 Jy ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=20.6 mas, bpa=-1.295 degrees ! Estimated noise=3434.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0691925 Jy ! Component: 100 - total flux cleaned = 0.107287 Jy ! Component: 150 - total flux cleaned = 0.129529 Jy ! Component: 200 - total flux cleaned = 0.143105 Jy ! Total flux subtracted in 200 components = 0.143105 Jy ! Clean residual min=-0.021656 max=0.018711 Jy/beam ! Clean residual mean=0.000106 rms=0.006779 Jy/beam ! Combined flux in latest and established models = 1.33097 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 95 components and 1.33097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.761 mas, bmaj=25.34 mas, bpa=-8.14 degrees ! Estimated noise=4001.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158067 Jy ! Component: 100 - total flux cleaned = 0.0232484 Jy ! Component: 150 - total flux cleaned = 0.0254875 Jy ! Component: 200 - total flux cleaned = 0.0260398 Jy ! Total flux subtracted in 200 components = 0.0260398 Jy ! Clean residual min=-0.025491 max=0.027392 Jy/beam ! Clean residual mean=0.000329 rms=0.009666 Jy/beam ! Combined flux in latest and established models = 1.35701 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265082 Jy ! Component: 100 - total flux cleaned = 0.000509718 Jy ! Component: 150 - total flux cleaned = 0.000627877 Jy ! Component: 200 - total flux cleaned = 0.000745173 Jy ! Total flux subtracted in 200 components = 0.000745173 Jy ! Clean residual min=-0.025526 max=0.027462 Jy/beam ! Clean residual mean=0.000338 rms=0.009632 Jy/beam ! Combined flux in latest and established models = 1.35776 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 115 components and 1.35776 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=20.6 mas, bpa=-1.295 degrees ! Estimated noise=3434.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0040378 Jy ! Component: 100 - total flux cleaned = -0.00406781 Jy ! Component: 150 - total flux cleaned = -0.00436417 Jy ! Component: 200 - total flux cleaned = -0.00458594 Jy ! Total flux subtracted in 200 components = -0.00458594 Jy ! Clean residual min=-0.020073 max=0.020799 Jy/beam ! Clean residual mean=0.000183 rms=0.006261 Jy/beam ! Combined flux in latest and established models = 1.35317 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 130 components and 1.35317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158573Jy sigma=0.000730 ! Fit after self-cal, rms=0.158621Jy sigma=0.000729 wmodel J0922-3959_S_2015_03_17_pus_map.mod ! Writing 130 model components to file: J0922-3959_S_2015_03_17_pus_map.mod wobs J0922-3959_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0922-3959_S_2015_03_17_pus_uvs.fits wwins J0922-3959_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0922-3959_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268161 Jy ! Component: 100 - total flux cleaned = 0.00331157 Jy ! Component: 150 - total flux cleaned = 0.00277504 Jy ! Component: 200 - total flux cleaned = 0.00178562 Jy ! Component: 250 - total flux cleaned = 0.000616751 Jy ! Component: 300 - total flux cleaned = -0.000911729 Jy ! Component: 350 - total flux cleaned = -0.00213286 Jy ! Component: 400 - total flux cleaned = -0.00233635 Jy ! Component: 450 - total flux cleaned = -0.00269766 Jy ! Component: 500 - total flux cleaned = -0.00320238 Jy ! Component: 550 - total flux cleaned = -0.00351933 Jy ! Component: 600 - total flux cleaned = -0.00367334 Jy ! Component: 650 - total flux cleaned = -0.00396585 Jy ! Component: 700 - total flux cleaned = -0.00437663 Jy ! Component: 750 - total flux cleaned = -0.00463991 Jy ! Component: 800 - total flux cleaned = -0.00451621 Jy ! Component: 850 - total flux cleaned = -0.0042778 Jy ! Component: 900 - total flux cleaned = -0.00439474 Jy ! Component: 950 - total flux cleaned = -0.00405356 Jy ! Component: 1000 - total flux cleaned = -0.00383133 Jy ! Component: 1050 - total flux cleaned = -0.00328493 Jy ! Component: 1100 - total flux cleaned = -0.00317629 Jy ! Component: 1150 - total flux cleaned = -0.00306818 Jy ! Component: 1200 - total flux cleaned = -0.00317514 Jy ! Component: 1250 - total flux cleaned = -0.00317452 Jy ! Component: 1300 - total flux cleaned = -0.00317485 Jy ! Component: 1350 - total flux cleaned = -0.00328366 Jy ! Component: 1400 - total flux cleaned = -0.00317473 Jy ! Component: 1450 - total flux cleaned = -0.00317437 Jy ! Component: 1500 - total flux cleaned = -0.00339206 Jy ! Component: 1550 - total flux cleaned = -0.00350158 Jy ! Component: 1600 - total flux cleaned = -0.00372022 Jy ! Component: 1650 - total flux cleaned = -0.0035 Jy ! Component: 1700 - total flux cleaned = -0.00350027 Jy ! Component: 1750 - total flux cleaned = -0.00338719 Jy ! Component: 1800 - total flux cleaned = -0.00327522 Jy ! Component: 1850 - total flux cleaned = -0.00304373 Jy ! Component: 1900 - total flux cleaned = -0.00304292 Jy ! Component: 1950 - total flux cleaned = -0.00304264 Jy ! Component: 2000 - total flux cleaned = -0.00291929 Jy ! Component: 2050 - total flux cleaned = -0.00292047 Jy ! Component: 2100 - total flux cleaned = -0.00279178 Jy ! Component: 2150 - total flux cleaned = -0.00279128 Jy ! Component: 2200 - total flux cleaned = -0.00265855 Jy ! Component: 2250 - total flux cleaned = -0.00265941 Jy ! Component: 2300 - total flux cleaned = -0.00251776 Jy ! Component: 2350 - total flux cleaned = -0.00237405 Jy ! Component: 2400 - total flux cleaned = -0.00237639 Jy ! Component: 2450 - total flux cleaned = -0.00222625 Jy ! Component: 2500 - total flux cleaned = -0.00237764 Jy ! Component: 2550 - total flux cleaned = -0.0025361 Jy ! Component: 2600 - total flux cleaned = -0.00253512 Jy ! Component: 2650 - total flux cleaned = -0.00253569 Jy ! Component: 2700 - total flux cleaned = -0.00270567 Jy ! Component: 2750 - total flux cleaned = -0.00288254 Jy ! Component: 2800 - total flux cleaned = -0.00270318 Jy ! Component: 2850 - total flux cleaned = -0.00270458 Jy ! Component: 2900 - total flux cleaned = -0.00270529 Jy ! Component: 2950 - total flux cleaned = -0.00270652 Jy ! Component: 3000 - total flux cleaned = -0.00270758 Jy ! Component: 3050 - total flux cleaned = -0.00271162 Jy ! Component: 3100 - total flux cleaned = -0.00271035 Jy ! Component: 3150 - total flux cleaned = -0.00270793 Jy ! Component: 3200 - total flux cleaned = -0.00270556 Jy ! Component: 3250 - total flux cleaned = -0.00295039 Jy ! Component: 3300 - total flux cleaned = -0.00294977 Jy ! Component: 3350 - total flux cleaned = -0.00320928 Jy ! Component: 3400 - total flux cleaned = -0.0032126 Jy ! Component: 3450 - total flux cleaned = -0.00321228 Jy ! Component: 3500 - total flux cleaned = -0.00350209 Jy ! Component: 3550 - total flux cleaned = -0.00350292 Jy ! Component: 3600 - total flux cleaned = -0.00350096 Jy ! Component: 3650 - total flux cleaned = -0.00349656 Jy ! Component: 3700 - total flux cleaned = -0.0038345 Jy ! Component: 3750 - total flux cleaned = -0.00383343 Jy ! Component: 3800 - total flux cleaned = -0.00383821 Jy ! Component: 3850 - total flux cleaned = -0.00385026 Jy ! Component: 3900 - total flux cleaned = -0.00385996 Jy ! Component: 3950 - total flux cleaned = -0.00386022 Jy ! Component: 4000 - total flux cleaned = -0.00385093 Jy ! Component: 4050 - total flux cleaned = -0.00384821 Jy ! Total flux subtracted in 4096 components = -0.00383918 Jy ! Clean residual min=-0.026243 max=0.025221 Jy/beam ! Clean residual mean=0.000091 rms=0.007088 Jy/beam ! Combined flux in latest and established models = 1.34933 Jy keep ! Adding 366 model components to the UV plane model. ! The established model now contains 496 components and 1.34933 Jy ![Exited script file: muppet] wmap "J0922-3959_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.897 x 20.6 at -1.295 degrees (North through East) ! Clean map min=-0.037515 max=1.1149 Jy/beam ! Writing clean map to FITS file: J0922-3959_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.11494 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00689967 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.85651 1.85651 3.71302 7.42603 14.8521 29.7041 59.4083 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0206 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.897 x 20.6 at -1.295 degrees (North through East) ! Clean map min=-0.037515 max=1.1149 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0922-3959_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:53:59 2016