! Started logfile: J0922-3959_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:19:19 2017 obs J0922-3959_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0922-3959_S_2015_01_23_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.540741 visibilities/baseline/integration-bin. ! Found source: J0922-3959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0922-3959_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.459912Jy sigma=0.003088 ! Fit after self-cal, rms=0.450901Jy sigma=0.003012 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.287 mas, bmaj=7.048 mas, bpa=-11.37 degrees ! Estimated noise=2991.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.620187 Jy ! Component: 100 - total flux cleaned = 0.813536 Jy ! Total flux subtracted in 100 components = 0.813536 Jy ! Clean residual min=-0.073679 max=0.175288 Jy/beam ! Clean residual mean=0.000259 rms=0.029406 Jy/beam ! Combined flux in latest and established models = 0.813536 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.813536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420505Jy sigma=0.002987 ! Fit after self-cal, rms=0.420469Jy sigma=0.002987 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=7.758 mas, bpa=-11.08 degrees ! Estimated noise=2588.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214029 Jy ! Component: 100 - total flux cleaned = 0.342541 Jy ! Component: 150 - total flux cleaned = 0.424128 Jy ! Component: 200 - total flux cleaned = 0.476016 Jy ! Total flux subtracted in 200 components = 0.476016 Jy ! Clean residual min=-0.072943 max=0.112163 Jy/beam ! Clean residual mean=0.000090 rms=0.023204 Jy/beam ! Combined flux in latest and established models = 1.28955 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 1.28955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302068Jy sigma=0.001822 ! Fit after self-cal, rms=0.301952Jy sigma=0.001822 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.70 KP 1.05 ! LA 0.95 MK 1.07 NL 1.29 OV 0.92 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.94 KP 0.98 ! LA 0.90 MK 1.04 NL 1.28 OV 0.96 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.95 KP 0.84 ! LA 0.74 MK 1.08 NL 1.16 OV 0.87 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.82 KP 0.79 ! LA 0.79 MK 1.05 NL 1.07 OV 0.92 ! PT 0.98 SC 0.93 ! ! ! Fit before self-cal, rms=0.301952Jy sigma=0.001822 ! Fit after self-cal, rms=0.181350Jy sigma=0.000841 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=7.668 mas, bpa=-10.06 degrees ! Estimated noise=2648.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472847 Jy ! Component: 100 - total flux cleaned = 0.00148955 Jy ! Component: 150 - total flux cleaned = -0.000466061 Jy ! Component: 200 - total flux cleaned = -0.00226342 Jy ! Total flux subtracted in 200 components = -0.00226342 Jy ! Clean residual min=-0.020469 max=0.017172 Jy/beam ! Clean residual mean=-0.000196 rms=0.004679 Jy/beam ! Combined flux in latest and established models = 1.28729 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 1.28729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176777Jy sigma=0.000820 ! Fit after self-cal, rms=0.177636Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177636Jy sigma=0.000819 ! Fit after self-cal, rms=0.178160Jy sigma=0.000816 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=7.633 mas, bpa=-9.977 degrees ! Estimated noise=2626.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105217 Jy ! Component: 100 - total flux cleaned = -0.000640571 Jy ! Component: 150 - total flux cleaned = -0.00255347 Jy ! Component: 200 - total flux cleaned = -0.00361775 Jy ! Total flux subtracted in 200 components = -0.00361775 Jy ! Clean residual min=-0.018664 max=0.015197 Jy/beam ! Clean residual mean=-0.000176 rms=0.004232 Jy/beam ! Combined flux in latest and established models = 1.28367 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 1.28367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175173Jy sigma=0.000803 ! Fit after self-cal, rms=0.175196Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103003 Jy ! Component: 100 - total flux cleaned = -0.00198233 Jy ! Component: 150 - total flux cleaned = -0.00257399 Jy ! Component: 200 - total flux cleaned = -0.00340998 Jy ! Total flux subtracted in 200 components = -0.00340998 Jy ! Clean residual min=-0.017424 max=0.014111 Jy/beam ! Clean residual mean=-0.000173 rms=0.004018 Jy/beam ! Combined flux in latest and established models = 1.28026 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 1.28026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173683Jy sigma=0.000796 ! Fit after self-cal, rms=0.173694Jy sigma=0.000796 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173694Jy sigma=0.000796 ! Fit after self-cal, rms=0.174638Jy sigma=0.000794 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=7.613 mas, bpa=-9.889 degrees ! Estimated noise=2612.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020766 Jy ! Component: 100 - total flux cleaned = -0.00316687 Jy ! Component: 150 - total flux cleaned = -0.00390142 Jy ! Component: 200 - total flux cleaned = -0.00460597 Jy ! Total flux subtracted in 200 components = -0.00460597 Jy ! Clean residual min=-0.016025 max=0.013045 Jy/beam ! Clean residual mean=-0.000149 rms=0.003741 Jy/beam ! Combined flux in latest and established models = 1.27566 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 1.27566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173233Jy sigma=0.000789 ! Fit after self-cal, rms=0.173260Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00068916 Jy ! Component: 100 - total flux cleaned = -0.00110247 Jy ! Component: 150 - total flux cleaned = -0.0014981 Jy ! Component: 200 - total flux cleaned = -0.00206879 Jy ! Total flux subtracted in 200 components = -0.00206879 Jy ! Clean residual min=-0.015361 max=0.012828 Jy/beam ! Clean residual mean=-0.000147 rms=0.003640 Jy/beam ! Combined flux in latest and established models = 1.27359 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 1.27359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172502Jy sigma=0.000786 ! Fit after self-cal, rms=0.172511Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172511Jy sigma=0.000786 ! Fit after self-cal, rms=0.173206Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.419 mas, bmaj=22.28 mas, bpa=-5.475 degrees ! Estimated noise=3430.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00542257 Jy ! Component: 100 - total flux cleaned = -0.00577782 Jy ! Component: 150 - total flux cleaned = -0.00593788 Jy ! Component: 200 - total flux cleaned = -0.00624002 Jy ! Total flux subtracted in 200 components = -0.00624002 Jy ! Clean residual min=-0.018800 max=0.018945 Jy/beam ! Clean residual mean=-0.000321 rms=0.006182 Jy/beam ! Combined flux in latest and established models = 1.26735 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 1.26735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172600Jy sigma=0.000786 ! Fit after self-cal, rms=0.172605Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430577 Jy ! Component: 100 - total flux cleaned = -0.000431228 Jy ! Component: 150 - total flux cleaned = -0.000549649 Jy ! Component: 200 - total flux cleaned = -0.000667157 Jy ! Total flux subtracted in 200 components = -0.000667157 Jy ! Clean residual min=-0.018301 max=0.018721 Jy/beam ! Clean residual mean=-0.000319 rms=0.006159 Jy/beam ! Combined flux in latest and established models = 1.26668 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 1.26668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172464Jy sigma=0.000789 ! Fit after self-cal, rms=0.172460Jy sigma=0.000789 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=7.605 mas, bpa=-9.828 degrees ! Estimated noise=2604.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.649 x 7.605 at -9.828 degrees (North through East) ! Clean map min=-0.013048 max=0.82522 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172460Jy sigma=0.000789 ! Fit after self-cal, rms=0.165522Jy sigma=0.000715 ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=7.597 mas, bpa=-9.377 degrees ! Estimated noise=2591.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211366 Jy ! Component: 100 - total flux cleaned = -0.0030023 Jy ! Component: 150 - total flux cleaned = -0.00362625 Jy ! Component: 200 - total flux cleaned = -0.00404955 Jy ! Total flux subtracted in 200 components = -0.00404955 Jy ! Clean residual min=-0.013190 max=0.013184 Jy/beam ! Clean residual mean=-0.000112 rms=0.003317 Jy/beam ! Combined flux in latest and established models = 1.26263 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 1.26263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164845Jy sigma=0.000712 ! Fit after self-cal, rms=0.164849Jy sigma=0.000712 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387802 Jy ! Component: 100 - total flux cleaned = -0.000755401 Jy ! Component: 150 - total flux cleaned = -0.00110666 Jy ! Component: 200 - total flux cleaned = -0.00155117 Jy ! Total flux subtracted in 200 components = -0.00155117 Jy ! Clean residual min=-0.012840 max=0.012986 Jy/beam ! Clean residual mean=-0.000111 rms=0.003286 Jy/beam ! Combined flux in latest and established models = 1.26108 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 1.26108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164511Jy sigma=0.000711 ! Fit after self-cal, rms=0.164517Jy sigma=0.000711 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164517Jy sigma=0.000711 ! Fit after self-cal, rms=0.165027Jy sigma=0.000711 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.304 mas, bmaj=6.759 mas, bpa=-9.562 degrees ! Estimated noise=3087.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.640983 Jy ! Component: 100 - total flux cleaned = 0.849539 Jy ! Component: 150 - total flux cleaned = 0.976674 Jy ! Component: 200 - total flux cleaned = 1.05693 Jy ! Total flux subtracted in 200 components = 1.05693 Jy ! Clean residual min=-0.027054 max=0.044514 Jy/beam ! Clean residual mean=0.000069 rms=0.010049 Jy/beam ! Combined flux in latest and established models = 1.05693 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.05693 Jy ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=7.596 mas, bpa=-9.353 degrees ! Estimated noise=2587.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0811693 Jy ! Component: 100 - total flux cleaned = 0.125272 Jy ! Component: 150 - total flux cleaned = 0.151723 Jy ! Component: 200 - total flux cleaned = 0.168352 Jy ! Total flux subtracted in 200 components = 0.168352 Jy ! Clean residual min=-0.013008 max=0.014545 Jy/beam ! Clean residual mean=-0.000059 rms=0.004010 Jy/beam ! Combined flux in latest and established models = 1.22528 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 79 components and 1.22528 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.423 mas, bmaj=22.24 mas, bpa=-5.199 degrees ! Estimated noise=3410.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191874 Jy ! Component: 100 - total flux cleaned = 0.0269535 Jy ! Component: 150 - total flux cleaned = 0.030068 Jy ! Component: 200 - total flux cleaned = 0.0302388 Jy ! Total flux subtracted in 200 components = 0.0302388 Jy ! Clean residual min=-0.015386 max=0.018435 Jy/beam ! Clean residual mean=-0.000233 rms=0.005952 Jy/beam ! Combined flux in latest and established models = 1.25552 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.69384e-05 Jy ! Component: 100 - total flux cleaned = 0.00022813 Jy ! Component: 150 - total flux cleaned = 0.000298172 Jy ! Component: 200 - total flux cleaned = 0.000364497 Jy ! Total flux subtracted in 200 components = 0.000364497 Jy ! Clean residual min=-0.015236 max=0.018398 Jy/beam ! Clean residual mean=-0.000233 rms=0.005905 Jy/beam ! Combined flux in latest and established models = 1.25589 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 1.25589 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=7.596 mas, bpa=-9.353 degrees ! Estimated noise=2587.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233921 Jy ! Component: 100 - total flux cleaned = -0.00339237 Jy ! Component: 150 - total flux cleaned = -0.00379812 Jy ! Component: 200 - total flux cleaned = -0.0038032 Jy ! Total flux subtracted in 200 components = -0.0038032 Jy ! Clean residual min=-0.010213 max=0.012854 Jy/beam ! Clean residual mean=-0.000090 rms=0.003159 Jy/beam ! Combined flux in latest and established models = 1.25208 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 1.25208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161972Jy sigma=0.000708 ! Fit after self-cal, rms=0.162093Jy sigma=0.000706 wmodel J0922-3959_S_2015_01_23_pus_map.mod ! Writing 103 model components to file: J0922-3959_S_2015_01_23_pus_map.mod wobs J0922-3959_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0922-3959_S_2015_01_23_pus_uvs.fits wwins J0922-3959_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0922-3959_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383743 Jy ! Component: 100 - total flux cleaned = 0.00455291 Jy ! Component: 150 - total flux cleaned = 0.00438934 Jy ! Component: 200 - total flux cleaned = 0.00438571 Jy ! Component: 250 - total flux cleaned = 0.00467339 Jy ! Component: 300 - total flux cleaned = 0.0053578 Jy ! Component: 350 - total flux cleaned = 0.005749 Jy ! Component: 400 - total flux cleaned = 0.00636362 Jy ! Component: 450 - total flux cleaned = 0.00694387 Jy ! Component: 500 - total flux cleaned = 0.00772269 Jy ! Component: 550 - total flux cleaned = 0.00846437 Jy ! Component: 600 - total flux cleaned = 0.00917475 Jy ! Component: 650 - total flux cleaned = 0.0100489 Jy ! Component: 700 - total flux cleaned = 0.0110721 Jy ! Component: 750 - total flux cleaned = 0.011879 Jy ! Component: 800 - total flux cleaned = 0.0124847 Jy ! Component: 850 - total flux cleaned = 0.0127371 Jy ! Component: 900 - total flux cleaned = 0.0129807 Jy ! Component: 950 - total flux cleaned = 0.0129794 Jy ! Component: 1000 - total flux cleaned = 0.0130561 Jy ! Component: 1050 - total flux cleaned = 0.0131322 Jy ! Component: 1100 - total flux cleaned = 0.0131339 Jy ! Component: 1150 - total flux cleaned = 0.0133544 Jy ! Component: 1200 - total flux cleaned = 0.0136415 Jy ! Component: 1250 - total flux cleaned = 0.0138509 Jy ! Component: 1300 - total flux cleaned = 0.013644 Jy ! Component: 1350 - total flux cleaned = 0.0136437 Jy ! Component: 1400 - total flux cleaned = 0.0135768 Jy ! Component: 1450 - total flux cleaned = 0.0135759 Jy ! Component: 1500 - total flux cleaned = 0.0135112 Jy ! Component: 1550 - total flux cleaned = 0.0138281 Jy ! Component: 1600 - total flux cleaned = 0.0140158 Jy ! Component: 1650 - total flux cleaned = 0.0142627 Jy ! Component: 1700 - total flux cleaned = 0.0143848 Jy ! Component: 1750 - total flux cleaned = 0.0147473 Jy ! Component: 1800 - total flux cleaned = 0.0151058 Jy ! Component: 1850 - total flux cleaned = 0.0152834 Jy ! Component: 1900 - total flux cleaned = 0.0155762 Jy ! Component: 1950 - total flux cleaned = 0.015924 Jy ! Component: 2000 - total flux cleaned = 0.0162114 Jy ! Component: 2050 - total flux cleaned = 0.0164389 Jy ! Component: 2100 - total flux cleaned = 0.0166642 Jy ! Component: 2150 - total flux cleaned = 0.0168328 Jy ! Component: 2200 - total flux cleaned = 0.0171112 Jy ! Component: 2250 - total flux cleaned = 0.0174426 Jy ! Component: 2300 - total flux cleaned = 0.0176627 Jy ! Component: 2350 - total flux cleaned = 0.0179908 Jy ! Component: 2400 - total flux cleaned = 0.0182624 Jy ! Component: 2450 - total flux cleaned = 0.018425 Jy ! Component: 2500 - total flux cleaned = 0.0187486 Jy ! Component: 2550 - total flux cleaned = 0.0189643 Jy ! Component: 2600 - total flux cleaned = 0.0191792 Jy ! Component: 2650 - total flux cleaned = 0.0194471 Jy ! Component: 2700 - total flux cleaned = 0.0196614 Jy ! Component: 2750 - total flux cleaned = 0.0197687 Jy ! Component: 2800 - total flux cleaned = 0.0199835 Jy ! Component: 2850 - total flux cleaned = 0.0200372 Jy ! Component: 2900 - total flux cleaned = 0.0202538 Jy ! Component: 2950 - total flux cleaned = 0.020362 Jy ! Component: 3000 - total flux cleaned = 0.0205258 Jy ! Component: 3050 - total flux cleaned = 0.0205808 Jy ! Component: 3100 - total flux cleaned = 0.0206905 Jy ! Component: 3150 - total flux cleaned = 0.0206906 Jy ! Component: 3200 - total flux cleaned = 0.0208017 Jy ! Component: 3250 - total flux cleaned = 0.0208582 Jy ! Component: 3300 - total flux cleaned = 0.020972 Jy ! Component: 3350 - total flux cleaned = 0.0210289 Jy ! Component: 3400 - total flux cleaned = 0.0209142 Jy ! Component: 3450 - total flux cleaned = 0.0210296 Jy ! Component: 3500 - total flux cleaned = 0.0211465 Jy ! Component: 3550 - total flux cleaned = 0.0210875 Jy ! Component: 3600 - total flux cleaned = 0.0211473 Jy ! Component: 3650 - total flux cleaned = 0.0212074 Jy ! Component: 3700 - total flux cleaned = 0.0212073 Jy ! Component: 3750 - total flux cleaned = 0.0213299 Jy ! Component: 3800 - total flux cleaned = 0.0213916 Jy ! Component: 3850 - total flux cleaned = 0.0214539 Jy ! Component: 3900 - total flux cleaned = 0.0214537 Jy ! Component: 3950 - total flux cleaned = 0.0215813 Jy ! Component: 4000 - total flux cleaned = 0.0215811 Jy ! Component: 4050 - total flux cleaned = 0.0215808 Jy ! Total flux subtracted in 4096 components = 0.0215155 Jy ! Clean residual min=-0.004103 max=0.003854 Jy/beam ! Clean residual mean=-0.000007 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 1.2736 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 348 components and 1.2736 Jy ![Exited script file: muppet] wmap "J0922-3959_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.65 x 7.596 at -9.353 degrees (North through East) ! Clean map min=-0.0062752 max=0.85272 Jy/beam ! Writing clean map to FITS file: J0922-3959_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.852719 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110965 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.390391 0.390391 0.780781 1.56156 3.12313 6.24625 12.4925 24.985 49.97 99.94 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.852 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.65 x 7.596 at -9.353 degrees (North through East) ! Clean map min=-0.0062752 max=0.85272 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0922-3959_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:19:24 2017