! Started logfile: J0919-0739_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:22:40 2017 obs J0919-0739_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0919-0739_S_2014_01_04_pus_uva.fits ! AN table 1: 106 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J0919-0739 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 10388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0919-0739_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.877238Jy sigma=0.010755 ! Fit after self-cal, rms=0.860992Jy sigma=0.010521 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=5.901 mas, bpa=0.5436 degrees ! Estimated noise=1002.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104285 Jy ! Component: 100 - total flux cleaned = 0.135293 Jy ! Total flux subtracted in 100 components = 0.135293 Jy ! Clean residual min=-0.007451 max=0.014076 Jy/beam ! Clean residual mean=-0.000012 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 0.135293 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.135293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087478Jy sigma=0.000956 ! Fit after self-cal, rms=0.087441Jy sigma=0.000955 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=6.764 mas, bpa=0.515 degrees ! Estimated noise=598.657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207506 Jy ! Component: 100 - total flux cleaned = 0.03111 Jy ! Component: 150 - total flux cleaned = 0.0373734 Jy ! Component: 200 - total flux cleaned = 0.041336 Jy ! Total flux subtracted in 200 components = 0.041336 Jy ! Clean residual min=-0.004449 max=0.005375 Jy/beam ! Clean residual mean=-0.000001 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.176629 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 42 components and 0.176629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082351Jy sigma=0.000895 ! Fit after self-cal, rms=0.082356Jy sigma=0.000895 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.87 KP 1.00* LA 1.02 ! MK 1.03 NL 1.00 OV 0.92 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 KP 1.00* LA 0.97 ! MK 1.00 NL 1.06 OV 0.97 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.20 KP 1.00* LA 0.80 ! MK 1.02 NL 1.04 OV 0.92 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.03 KP 1.00* LA 0.86 ! MK 1.01 NL 1.13 OV 0.96 PT 1.00 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.082356Jy sigma=0.000895 ! Fit after self-cal, rms=0.079064Jy sigma=0.000873 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=6.847 mas, bpa=0.8507 degrees ! Estimated noise=595.452 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209838 Jy ! Component: 100 - total flux cleaned = 0.000242405 Jy ! Component: 150 - total flux cleaned = 0.000211197 Jy ! Component: 200 - total flux cleaned = 0.000183604 Jy ! Total flux subtracted in 200 components = 0.000183604 Jy ! Clean residual min=-0.002539 max=0.003260 Jy/beam ! Clean residual mean=0.000004 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.176813 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.176813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079037Jy sigma=0.000872 ! Fit after self-cal, rms=0.078818Jy sigma=0.000872 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078818Jy sigma=0.000872 ! Fit after self-cal, rms=0.078837Jy sigma=0.000871 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=6.851 mas, bpa=0.9101 degrees ! Estimated noise=595.413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133281 Jy ! Component: 100 - total flux cleaned = 0.000159249 Jy ! Component: 150 - total flux cleaned = 0.000135984 Jy ! Component: 200 - total flux cleaned = 0.000114919 Jy ! Total flux subtracted in 200 components = 0.000114919 Jy ! Clean residual min=-0.002420 max=0.003185 Jy/beam ! Clean residual mean=0.000005 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.176928 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.176928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078820Jy sigma=0.000870 ! Fit after self-cal, rms=0.078814Jy sigma=0.000870 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293267 Jy ! Component: 100 - total flux cleaned = 0.0038073 Jy ! Component: 150 - total flux cleaned = 0.00393175 Jy ! Component: 200 - total flux cleaned = 0.00400218 Jy ! Total flux subtracted in 200 components = 0.00400218 Jy ! Clean residual min=-0.002204 max=0.002321 Jy/beam ! Clean residual mean=0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.18093 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.18093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078696Jy sigma=0.000869 ! Fit after self-cal, rms=0.078691Jy sigma=0.000869 ! Inverting map ! Added new window around map position (-80, -32.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200131 Jy ! Component: 100 - total flux cleaned = 0.00300516 Jy ! Component: 150 - total flux cleaned = 0.00357687 Jy ! Component: 200 - total flux cleaned = 0.00386539 Jy ! Total flux subtracted in 200 components = 0.00386539 Jy ! Clean residual min=-0.001909 max=0.001835 Jy/beam ! Clean residual mean=0.000004 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.184795 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.184795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078626Jy sigma=0.000868 ! Fit after self-cal, rms=0.078618Jy sigma=0.000868 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078618Jy sigma=0.000868 ! Fit after self-cal, rms=0.078676Jy sigma=0.000868 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=6.847 mas, bpa=0.8622 degrees ! Estimated noise=595.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894917 Jy ! Component: 100 - total flux cleaned = 0.00138432 Jy ! Component: 150 - total flux cleaned = 0.00155098 Jy ! Component: 200 - total flux cleaned = 0.00162445 Jy ! Total flux subtracted in 200 components = 0.00162445 Jy ! Clean residual min=-0.001736 max=0.001912 Jy/beam ! Clean residual mean=0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.18642 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.18642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078649Jy sigma=0.000868 ! Fit after self-cal, rms=0.078652Jy sigma=0.000868 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (60.5, 41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899161 Jy ! Component: 100 - total flux cleaned = 0.00107764 Jy ! Component: 150 - total flux cleaned = 0.00137251 Jy ! Component: 200 - total flux cleaned = 0.00161517 Jy ! Total flux subtracted in 200 components = 0.00161517 Jy ! Clean residual min=-0.001676 max=0.001407 Jy/beam ! Clean residual mean=0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.188035 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 136 components and 0.188035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078588Jy sigma=0.000867 ! Fit after self-cal, rms=0.078574Jy sigma=0.000867 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078574Jy sigma=0.000867 ! Fit after self-cal, rms=0.078431Jy sigma=0.000867 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.78 mas, bmaj=12.59 mas, bpa=11.27 degrees ! Estimated noise=719.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336094 Jy ! Component: 100 - total flux cleaned = 0.000849071 Jy ! Component: 150 - total flux cleaned = 0.00128716 Jy ! Component: 200 - total flux cleaned = 0.00159305 Jy ! Total flux subtracted in 200 components = 0.00159305 Jy ! Clean residual min=-0.001552 max=0.001346 Jy/beam ! Clean residual mean=0.000003 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.189628 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 167 components and 0.189628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078424Jy sigma=0.000867 ! Fit after self-cal, rms=0.078430Jy sigma=0.000867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111163 Jy ! Component: 100 - total flux cleaned = 0.000288845 Jy ! Component: 150 - total flux cleaned = 0.00044557 Jy ! Component: 200 - total flux cleaned = 0.000573927 Jy ! Total flux subtracted in 200 components = 0.000573927 Jy ! Clean residual min=-0.001514 max=0.001304 Jy/beam ! Clean residual mean=0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.190202 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 183 components and 0.190202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078428Jy sigma=0.000867 ! Fit after self-cal, rms=0.078425Jy sigma=0.000867 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=6.84 mas, bpa=0.8584 degrees ! Estimated noise=594.039 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 6.84 at 0.8584 degrees (North through East) ! Clean map min=-0.0015196 max=0.13927 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=5.953 mas, bpa=0.8384 degrees ! Estimated noise=1001.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104008 Jy ! Component: 100 - total flux cleaned = 0.135763 Jy ! Component: 150 - total flux cleaned = 0.151615 Jy ! Component: 200 - total flux cleaned = 0.160566 Jy ! Total flux subtracted in 200 components = 0.160566 Jy ! Clean residual min=-0.003932 max=0.005231 Jy/beam ! Clean residual mean=-0.000002 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.160566 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.160566 Jy ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=6.84 mas, bpa=0.8584 degrees ! Estimated noise=594.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756148 Jy ! Component: 100 - total flux cleaned = 0.0118644 Jy ! Component: 150 - total flux cleaned = 0.0146881 Jy ! Component: 200 - total flux cleaned = 0.0163893 Jy ! Total flux subtracted in 200 components = 0.0163893 Jy ! Clean residual min=-0.002426 max=0.002045 Jy/beam ! Clean residual mean=0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.176956 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.176956 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.78 mas, bmaj=12.59 mas, bpa=11.27 degrees ! Estimated noise=719.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250736 Jy ! Component: 100 - total flux cleaned = 0.00389517 Jy ! Component: 150 - total flux cleaned = 0.00516514 Jy ! Component: 200 - total flux cleaned = 0.00617954 Jy ! Total flux subtracted in 200 components = 0.00617954 Jy ! Clean residual min=-0.001508 max=0.001319 Jy/beam ! Clean residual mean=0.000004 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.183135 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862239 Jy ! Component: 100 - total flux cleaned = 0.00168011 Jy ! Component: 150 - total flux cleaned = 0.00237634 Jy ! Component: 200 - total flux cleaned = 0.00302614 Jy ! Total flux subtracted in 200 components = 0.00302614 Jy ! Clean residual min=-0.001337 max=0.001224 Jy/beam ! Clean residual mean=0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.186161 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 105 components and 0.186161 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=6.84 mas, bpa=0.8584 degrees ! Estimated noise=594.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141338 Jy ! Component: 100 - total flux cleaned = 0.000335387 Jy ! Component: 150 - total flux cleaned = 0.000378116 Jy ! Component: 200 - total flux cleaned = 0.000378254 Jy ! Total flux subtracted in 200 components = 0.000378254 Jy ! Clean residual min=-0.001583 max=0.001393 Jy/beam ! Clean residual mean=0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.18654 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 123 components and 0.18654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078447Jy sigma=0.000867 ! Fit after self-cal, rms=0.078412Jy sigma=0.000867 wmodel J0919-0739_S_2014_01_04_pus_map.mod ! Writing 123 model components to file: J0919-0739_S_2014_01_04_pus_map.mod wobs J0919-0739_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0919-0739_S_2014_01_04_pus_uvs.fits wwins J0919-0739_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0919-0739_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000472393 Jy ! Component: 100 - total flux cleaned = -0.00064605 Jy ! Component: 150 - total flux cleaned = -0.000670426 Jy ! Component: 200 - total flux cleaned = -0.000647979 Jy ! Component: 250 - total flux cleaned = -0.00064729 Jy ! Component: 300 - total flux cleaned = -0.000584584 Jy ! Component: 350 - total flux cleaned = -0.000544903 Jy ! Component: 400 - total flux cleaned = -0.000564371 Jy ! Component: 450 - total flux cleaned = -0.000545015 Jy ! Component: 500 - total flux cleaned = -0.000507965 Jy ! Component: 550 - total flux cleaned = -0.000453403 Jy ! Component: 600 - total flux cleaned = -0.000399997 Jy ! Component: 650 - total flux cleaned = -0.000294947 Jy ! Component: 700 - total flux cleaned = -0.000157953 Jy ! Component: 750 - total flux cleaned = -4.03601e-05 Jy ! Component: 800 - total flux cleaned = 9.20694e-05 Jy ! Component: 850 - total flux cleaned = 0.000173641 Jy ! Component: 900 - total flux cleaned = 0.000286246 Jy ! Component: 950 - total flux cleaned = 0.000412742 Jy ! Component: 1000 - total flux cleaned = 0.000490787 Jy ! Component: 1050 - total flux cleaned = 0.000659881 Jy ! Component: 1100 - total flux cleaned = 0.000735771 Jy ! Component: 1150 - total flux cleaned = 0.000855094 Jy ! Component: 1200 - total flux cleaned = 0.000869752 Jy ! Component: 1250 - total flux cleaned = 0.000957018 Jy ! Component: 1300 - total flux cleaned = 0.00101433 Jy ! Component: 1350 - total flux cleaned = 0.0010568 Jy ! Component: 1400 - total flux cleaned = 0.00107107 Jy ! Component: 1450 - total flux cleaned = 0.00109872 Jy ! Component: 1500 - total flux cleaned = 0.00111218 Jy ! Component: 1550 - total flux cleaned = 0.00109879 Jy ! Component: 1600 - total flux cleaned = 0.00111213 Jy ! Component: 1650 - total flux cleaned = 0.00109906 Jy ! Component: 1700 - total flux cleaned = 0.0011517 Jy ! Component: 1750 - total flux cleaned = 0.00113876 Jy ! Component: 1800 - total flux cleaned = 0.00115183 Jy ! Component: 1850 - total flux cleaned = 0.00113934 Jy ! Component: 1900 - total flux cleaned = 0.00117719 Jy ! Component: 1950 - total flux cleaned = 0.00120205 Jy ! Component: 2000 - total flux cleaned = 0.00117742 Jy ! Component: 2050 - total flux cleaned = 0.00118955 Jy ! Component: 2100 - total flux cleaned = 0.00118944 Jy ! Component: 2150 - total flux cleaned = 0.00117745 Jy ! Component: 2200 - total flux cleaned = 0.00117741 Jy ! Component: 2250 - total flux cleaned = 0.00115377 Jy ! Component: 2300 - total flux cleaned = 0.00113048 Jy ! Component: 2350 - total flux cleaned = 0.0011304 Jy ! Component: 2400 - total flux cleaned = 0.001096 Jy ! Component: 2450 - total flux cleaned = 0.00109611 Jy ! Component: 2500 - total flux cleaned = 0.0010848 Jy ! Component: 2550 - total flux cleaned = 0.00106234 Jy ! Component: 2600 - total flux cleaned = 0.00105111 Jy ! Component: 2650 - total flux cleaned = 0.00101818 Jy ! Component: 2700 - total flux cleaned = 0.00101819 Jy ! Component: 2750 - total flux cleaned = 0.000986011 Jy ! Component: 2800 - total flux cleaned = 0.000986056 Jy ! Component: 2850 - total flux cleaned = 0.000943527 Jy ! Component: 2900 - total flux cleaned = 0.000943646 Jy ! Component: 2950 - total flux cleaned = 0.000933099 Jy ! Component: 3000 - total flux cleaned = 0.000881038 Jy ! Component: 3050 - total flux cleaned = 0.000850076 Jy ! Component: 3100 - total flux cleaned = 0.000839857 Jy ! Component: 3150 - total flux cleaned = 0.000799058 Jy ! Component: 3200 - total flux cleaned = 0.000778822 Jy ! Component: 3250 - total flux cleaned = 0.000718496 Jy ! Component: 3300 - total flux cleaned = 0.000738447 Jy ! Component: 3350 - total flux cleaned = 0.000668956 Jy ! Component: 3400 - total flux cleaned = 0.000678772 Jy ! Component: 3450 - total flux cleaned = 0.000629833 Jy ! Component: 3500 - total flux cleaned = 0.000649383 Jy ! Component: 3550 - total flux cleaned = 0.000639683 Jy ! Component: 3600 - total flux cleaned = 0.000601236 Jy ! Component: 3650 - total flux cleaned = 0.000601255 Jy ! Component: 3700 - total flux cleaned = 0.000572719 Jy ! Component: 3750 - total flux cleaned = 0.00057278 Jy ! Component: 3800 - total flux cleaned = 0.000554016 Jy ! Component: 3850 - total flux cleaned = 0.000535371 Jy ! Component: 3900 - total flux cleaned = 0.000544659 Jy ! Component: 3950 - total flux cleaned = 0.000563119 Jy ! Component: 4000 - total flux cleaned = 0.000526202 Jy ! Component: 4050 - total flux cleaned = 0.000517051 Jy ! Total flux subtracted in 4096 components = 0.000517045 Jy ! Clean residual min=-0.000548 max=0.000562 Jy/beam ! Clean residual mean=0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.187057 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 348 components and 0.187057 Jy ![Exited script file: muppet] wmap "J0919-0739_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 6.84 at 0.8584 degrees (North through East) ! Clean map min=-0.0015261 max=0.14009 Jy/beam ! Writing clean map to FITS file: J0919-0739_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140088 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155326 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332633 0.332633 0.665265 1.33053 2.66106 5.32212 10.6442 21.2885 42.577 85.1539 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 6.84 at 0.8584 degrees (North through East) ! Clean map min=-0.0015261 max=0.14009 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0919-0739_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:22:44 2017