! Started logfile: J0915-3029_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:19:15 2017 obs J0915-3029_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0915-3029_S_2015_01_23_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.532877 visibilities/baseline/integration-bin. ! Found source: J0915-3029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 14004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0915-3029_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.141263Jy sigma=0.007629 ! Fit after self-cal, rms=1.040598Jy sigma=0.007265 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=7.846 mas, bpa=-10.22 degrees ! Estimated noise=1477.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455394 Jy ! Component: 100 - total flux cleaned = 0.0558664 Jy ! Total flux subtracted in 100 components = 0.0558664 Jy ! Clean residual min=-0.006463 max=0.006809 Jy/beam ! Clean residual mean=-0.000015 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.0558664 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0558664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.553781Jy sigma=0.000747 ! Fit after self-cal, rms=0.553528Jy sigma=0.000738 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.093 mas, bmaj=11.55 mas, bpa=-3.01 degrees ! Estimated noise=861.906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00840859 Jy ! Component: 100 - total flux cleaned = 0.0120237 Jy ! Component: 150 - total flux cleaned = 0.0137617 Jy ! Component: 200 - total flux cleaned = 0.0146118 Jy ! Total flux subtracted in 200 components = 0.0146118 Jy ! Clean residual min=-0.006689 max=0.004832 Jy/beam ! Clean residual mean=0.000024 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.0704783 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.0704783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.552290Jy sigma=0.000739 ! Fit after self-cal, rms=0.552327Jy sigma=0.000739 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.10 HN 0.95 KP 1.16 ! LA 1.05 MK 1.05 NL 1.05 OV 1.11 ! PT 1.21 SC 1.13 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.16 HN 0.98 KP 1.07 ! LA 1.04 MK 1.07 NL 1.12 OV 1.13 ! PT 1.11 SC 1.14 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.21 HN 0.93 KP 1.02 ! LA 0.83 MK 0.96 NL 1.36 OV 1.09 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.20 HN 0.98 KP 0.96 ! LA 0.85 MK 0.98 NL 1.06 OV 1.05 ! PT 1.15 SC 1.04 ! ! ! Fit before self-cal, rms=0.552327Jy sigma=0.000739 ! Fit after self-cal, rms=0.121318Jy sigma=0.000728 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.142 mas, bmaj=11.66 mas, bpa=-3.813 degrees ! Estimated noise=868.291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543767 Jy ! Component: 100 - total flux cleaned = 0.00058836 Jy ! Component: 150 - total flux cleaned = 0.000607424 Jy ! Component: 200 - total flux cleaned = 0.000624298 Jy ! Total flux subtracted in 200 components = 0.000624298 Jy ! Clean residual min=-0.002445 max=0.002731 Jy/beam ! Clean residual mean=-0.000021 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0711026 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.0711026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121309Jy sigma=0.000728 ! Fit after self-cal, rms=0.119753Jy sigma=0.000725 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119753Jy sigma=0.000725 ! Fit after self-cal, rms=0.110725Jy sigma=0.000724 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.153 mas, bmaj=11.68 mas, bpa=-4.012 degrees ! Estimated noise=853.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222387 Jy ! Component: 100 - total flux cleaned = 0.000270606 Jy ! Component: 150 - total flux cleaned = 0.000312343 Jy ! Component: 200 - total flux cleaned = 0.000336926 Jy ! Total flux subtracted in 200 components = 0.000336926 Jy ! Clean residual min=-0.002269 max=0.002553 Jy/beam ! Clean residual mean=-0.000019 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0714395 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.0714395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110721Jy sigma=0.000724 ! Fit after self-cal, rms=0.110443Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305917 Jy ! Component: 100 - total flux cleaned = 0.000357236 Jy ! Component: 150 - total flux cleaned = 0.000391108 Jy ! Component: 200 - total flux cleaned = 0.000420701 Jy ! Total flux subtracted in 200 components = 0.000420701 Jy ! Clean residual min=-0.002186 max=0.002466 Jy/beam ! Clean residual mean=-0.000015 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0718602 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 62 components and 0.0718602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110440Jy sigma=0.000724 ! Fit after self-cal, rms=0.110403Jy sigma=0.000724 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110403Jy sigma=0.000724 ! Fit after self-cal, rms=0.109291Jy sigma=0.000724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=11.71 mas, bpa=-4.03 degrees ! Estimated noise=853.066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143322 Jy ! Component: 100 - total flux cleaned = 0.000168404 Jy ! Component: 150 - total flux cleaned = 0.000180816 Jy ! Component: 200 - total flux cleaned = 0.000202609 Jy ! Total flux subtracted in 200 components = 0.000202609 Jy ! Clean residual min=-0.002283 max=0.002475 Jy/beam ! Clean residual mean=-0.000018 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0720628 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.0720628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109289Jy sigma=0.000723 ! Fit after self-cal, rms=0.109223Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100555 Jy ! Component: 100 - total flux cleaned = 0.0001233 Jy ! Component: 150 - total flux cleaned = 0.000144344 Jy ! Component: 200 - total flux cleaned = 0.000153473 Jy ! Total flux subtracted in 200 components = 0.000153473 Jy ! Clean residual min=-0.002348 max=0.002499 Jy/beam ! Clean residual mean=-0.000017 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0722163 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.0722163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109221Jy sigma=0.000723 ! Fit after self-cal, rms=0.109208Jy sigma=0.000723 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109208Jy sigma=0.000723 ! Fit after self-cal, rms=0.109083Jy sigma=0.000723 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.46 mas, bmaj=22.65 mas, bpa=-2.465 degrees ! Estimated noise=987.517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269291 Jy ! Component: 100 - total flux cleaned = 0.000267613 Jy ! Component: 150 - total flux cleaned = 0.000260733 Jy ! Component: 200 - total flux cleaned = 0.000254906 Jy ! Total flux subtracted in 200 components = 0.000254906 Jy ! Clean residual min=-0.002289 max=0.002180 Jy/beam ! Clean residual mean=-0.000029 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0724712 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 70 components and 0.0724712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109083Jy sigma=0.000723 ! Fit after self-cal, rms=0.109074Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.04849e-05 Jy ! Component: 100 - total flux cleaned = 3.07368e-05 Jy ! Component: 150 - total flux cleaned = 1.7551e-05 Jy ! Component: 200 - total flux cleaned = 1.22375e-05 Jy ! Total flux subtracted in 200 components = 1.22375e-05 Jy ! Clean residual min=-0.002309 max=0.002181 Jy/beam ! Clean residual mean=-0.000029 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0724834 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.0724834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109074Jy sigma=0.000723 ! Fit after self-cal, rms=0.109073Jy sigma=0.000723 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=11.75 mas, bpa=-3.989 degrees ! Estimated noise=853.716 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.152 x 11.75 at -3.989 degrees (North through East) ! Clean map min=-0.0022981 max=0.062532 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.864 mas, bpa=-11.28 degrees ! Estimated noise=1504.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485599 Jy ! Component: 100 - total flux cleaned = 0.0603054 Jy ! Component: 150 - total flux cleaned = 0.0658669 Jy ! Component: 200 - total flux cleaned = 0.0689931 Jy ! Total flux subtracted in 200 components = 0.0689931 Jy ! Clean residual min=-0.004745 max=0.005158 Jy/beam ! Clean residual mean=-0.000027 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.0689931 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0689931 Jy ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=11.75 mas, bpa=-3.989 degrees ! Estimated noise=853.716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281409 Jy ! Component: 100 - total flux cleaned = 0.00432275 Jy ! Component: 150 - total flux cleaned = 0.00455021 Jy ! Component: 200 - total flux cleaned = 0.00470175 Jy ! Total flux subtracted in 200 components = 0.00470175 Jy ! Clean residual min=-0.002465 max=0.002166 Jy/beam ! Clean residual mean=-0.000016 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0736948 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.0736948 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.46 mas, bmaj=22.65 mas, bpa=-2.465 degrees ! Estimated noise=987.517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225231 Jy ! Component: 100 - total flux cleaned = 0.000160815 Jy ! Component: 150 - total flux cleaned = 0.000121416 Jy ! Component: 200 - total flux cleaned = 8.65925e-05 Jy ! Total flux subtracted in 200 components = 8.65925e-05 Jy ! Clean residual min=-0.002311 max=0.002034 Jy/beam ! Clean residual mean=-0.000025 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0737814 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.78176e-05 Jy ! Component: 100 - total flux cleaned = -6.24172e-05 Jy ! Component: 150 - total flux cleaned = -9.00859e-05 Jy ! Component: 200 - total flux cleaned = -0.00010325 Jy ! Total flux subtracted in 200 components = -0.00010325 Jy ! Clean residual min=-0.002291 max=0.002024 Jy/beam ! Clean residual mean=-0.000025 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0736782 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 71 components and 0.0736782 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=11.75 mas, bpa=-3.989 degrees ! Estimated noise=853.716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201164 Jy ! Component: 100 - total flux cleaned = -0.000175629 Jy ! Component: 150 - total flux cleaned = -0.000130118 Jy ! Component: 200 - total flux cleaned = -6.69584e-05 Jy ! Total flux subtracted in 200 components = -6.69584e-05 Jy ! Clean residual min=-0.002363 max=0.002183 Jy/beam ! Clean residual mean=-0.000016 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0736112 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.0736112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109015Jy sigma=0.000723 ! Fit after self-cal, rms=0.108953Jy sigma=0.000723 wmodel J0915-3029_S_2015_01_23_pus_map.mod ! Writing 86 model components to file: J0915-3029_S_2015_01_23_pus_map.mod wobs J0915-3029_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0915-3029_S_2015_01_23_pus_uvs.fits wwins J0915-3029_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0915-3029_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296303 Jy ! Component: 100 - total flux cleaned = 0.00029765 Jy ! Component: 150 - total flux cleaned = 0.000369292 Jy ! Component: 200 - total flux cleaned = 0.000336697 Jy ! Component: 250 - total flux cleaned = 0.0004318 Jy ! Component: 300 - total flux cleaned = 0.000584903 Jy ! Component: 350 - total flux cleaned = 0.000704235 Jy ! Component: 400 - total flux cleaned = 0.000761588 Jy ! Component: 450 - total flux cleaned = 0.000845442 Jy ! Component: 500 - total flux cleaned = 0.000817463 Jy ! Component: 550 - total flux cleaned = 0.000817492 Jy ! Component: 600 - total flux cleaned = 0.000764002 Jy ! Component: 650 - total flux cleaned = 0.000789936 Jy ! Component: 700 - total flux cleaned = 0.000764847 Jy ! Component: 750 - total flux cleaned = 0.000789375 Jy ! Component: 800 - total flux cleaned = 0.000861253 Jy ! Component: 850 - total flux cleaned = 0.000884114 Jy ! Component: 900 - total flux cleaned = 0.000883309 Jy ! Component: 950 - total flux cleaned = 0.000815129 Jy ! Component: 1000 - total flux cleaned = 0.000837915 Jy ! Component: 1050 - total flux cleaned = 0.00083772 Jy ! Component: 1100 - total flux cleaned = 0.000837675 Jy ! Component: 1150 - total flux cleaned = 0.000816748 Jy ! Component: 1200 - total flux cleaned = 0.000837715 Jy ! Component: 1250 - total flux cleaned = 0.000817504 Jy ! Component: 1300 - total flux cleaned = 0.000837851 Jy ! Component: 1350 - total flux cleaned = 0.000897637 Jy ! Component: 1400 - total flux cleaned = 0.000916851 Jy ! Component: 1450 - total flux cleaned = 0.000897331 Jy ! Component: 1500 - total flux cleaned = 0.000840004 Jy ! Component: 1550 - total flux cleaned = 0.000897112 Jy ! Component: 1600 - total flux cleaned = 0.00091623 Jy ! Component: 1650 - total flux cleaned = 0.000989963 Jy ! Component: 1700 - total flux cleaned = 0.00106207 Jy ! Component: 1750 - total flux cleaned = 0.00104405 Jy ! Component: 1800 - total flux cleaned = 0.00107947 Jy ! Component: 1850 - total flux cleaned = 0.00104456 Jy ! Component: 1900 - total flux cleaned = 0.00107924 Jy ! Component: 1950 - total flux cleaned = 0.00104531 Jy ! Component: 2000 - total flux cleaned = 0.00104535 Jy ! Component: 2050 - total flux cleaned = 0.00102853 Jy ! Component: 2100 - total flux cleaned = 0.00096259 Jy ! Component: 2150 - total flux cleaned = 0.000946531 Jy ! Component: 2200 - total flux cleaned = 0.000930124 Jy ! Component: 2250 - total flux cleaned = 0.000914141 Jy ! Component: 2300 - total flux cleaned = 0.00091397 Jy ! Component: 2350 - total flux cleaned = 0.000788962 Jy ! Component: 2400 - total flux cleaned = 0.000696269 Jy ! Component: 2450 - total flux cleaned = 0.000634977 Jy ! Component: 2500 - total flux cleaned = 0.000559288 Jy ! Component: 2550 - total flux cleaned = 0.000484113 Jy ! Component: 2600 - total flux cleaned = 0.000380085 Jy ! Component: 2650 - total flux cleaned = 0.00032092 Jy ! Component: 2700 - total flux cleaned = 0.000262387 Jy ! Component: 2750 - total flux cleaned = 0.000175551 Jy ! Component: 2800 - total flux cleaned = 6.08356e-05 Jy ! Component: 2850 - total flux cleaned = 1.81808e-05 Jy ! Component: 2900 - total flux cleaned = -6.65472e-05 Jy ! Component: 2950 - total flux cleaned = -8.05151e-05 Jy ! Component: 3000 - total flux cleaned = -0.00013607 Jy ! Component: 3050 - total flux cleaned = -0.000177458 Jy ! Component: 3100 - total flux cleaned = -0.000245924 Jy ! Component: 3150 - total flux cleaned = -0.000327398 Jy ! Component: 3200 - total flux cleaned = -0.000394919 Jy ! Component: 3250 - total flux cleaned = -0.000461746 Jy ! Component: 3300 - total flux cleaned = -0.000501578 Jy ! Component: 3350 - total flux cleaned = -0.000501656 Jy ! Component: 3400 - total flux cleaned = -0.00061955 Jy ! Component: 3450 - total flux cleaned = -0.000554485 Jy ! Component: 3500 - total flux cleaned = -0.000606285 Jy ! Component: 3550 - total flux cleaned = -0.000696189 Jy ! Component: 3600 - total flux cleaned = -0.000747233 Jy ! Component: 3650 - total flux cleaned = -0.000810411 Jy ! Component: 3700 - total flux cleaned = -0.00083552 Jy ! Component: 3750 - total flux cleaned = -0.000923152 Jy ! Component: 3800 - total flux cleaned = -0.000935655 Jy ! Component: 3850 - total flux cleaned = -0.00104729 Jy ! Component: 3900 - total flux cleaned = -0.00115814 Jy ! Component: 3950 - total flux cleaned = -0.00119491 Jy ! Component: 4000 - total flux cleaned = -0.00128031 Jy ! Component: 4050 - total flux cleaned = -0.00137734 Jy ! Total flux subtracted in 4096 components = -0.00142563 Jy ! Clean residual min=-0.000802 max=0.000622 Jy/beam ! Clean residual mean=-0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0721856 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 313 components and 0.0721855 Jy ![Exited script file: muppet] wmap "J0915-3029_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.152 x 11.75 at -3.989 degrees (North through East) ! Clean map min=-0.0016959 max=0.062652 Jy/beam ! Writing clean map to FITS file: J0915-3029_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0626521 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209096 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00122 1.00122 2.00245 4.0049 8.0098 16.0196 32.0392 64.0784 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.152 x 11.75 at -3.989 degrees (North through East) ! Clean map min=-0.0016959 max=0.062652 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0915-3029_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:19:19 2017