! Started logfile: J0913+4402_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:22:35 2017 obs J0913+4402_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0913+4402_S_2014_01_04_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J0913+4402 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 11368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0913+4402_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943816Jy sigma=0.013120 ! Fit after self-cal, rms=0.932821Jy sigma=0.012925 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=3.938 mas, bpa=-52.93 degrees ! Estimated noise=888.552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551662 Jy ! Component: 100 - total flux cleaned = 0.0672518 Jy ! Total flux subtracted in 100 components = 0.0672518 Jy ! Clean residual min=-0.003505 max=0.003690 Jy/beam ! Clean residual mean=-0.000006 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0672518 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0672518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074995Jy sigma=0.000858 ! Fit after self-cal, rms=0.074973Jy sigma=0.000858 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.468 mas, bmaj=4.798 mas, bpa=-58.49 degrees ! Estimated noise=514.882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024418 Jy ! Component: 100 - total flux cleaned = 0.00347695 Jy ! Component: 150 - total flux cleaned = 0.00360094 Jy ! Component: 200 - total flux cleaned = 0.00369537 Jy ! Total flux subtracted in 200 components = 0.00369537 Jy ! Clean residual min=-0.002426 max=0.002470 Jy/beam ! Clean residual mean=-0.000010 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0709471 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.0709471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074888Jy sigma=0.000857 ! Fit after self-cal, rms=0.074898Jy sigma=0.000857 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 KP 1.00* LA 1.04 ! MK 1.01 NL 0.99 OV 1.01 PT 1.06 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 KP 1.00* LA 0.95 ! MK 1.00 NL 1.13 OV 1.06 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 KP 1.00* LA 0.81 ! MK 1.03 NL 0.98 OV 0.97 PT 1.03 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.89 KP 1.00* LA 0.84 ! MK 1.04 NL 1.14 OV 0.99 PT 1.04 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.074898Jy sigma=0.000857 ! Fit after self-cal, rms=0.072753Jy sigma=0.000852 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.486 mas, bmaj=4.774 mas, bpa=-60.52 degrees ! Estimated noise=512.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000545 Jy ! Component: 100 - total flux cleaned = -0.000567886 Jy ! Component: 150 - total flux cleaned = -0.000586334 Jy ! Component: 200 - total flux cleaned = -0.00061077 Jy ! Total flux subtracted in 200 components = -0.00061077 Jy ! Clean residual min=-0.001889 max=0.002140 Jy/beam ! Clean residual mean=-0.000007 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0703364 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0703363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072745Jy sigma=0.000852 ! Fit after self-cal, rms=0.072698Jy sigma=0.000852 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072698Jy sigma=0.000852 ! Fit after self-cal, rms=0.073244Jy sigma=0.000850 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.478 mas, bmaj=4.775 mas, bpa=-60.57 degrees ! Estimated noise=511.174 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100324 Jy ! Component: 100 - total flux cleaned = -8.83405e-05 Jy ! Component: 150 - total flux cleaned = -0.000114943 Jy ! Component: 200 - total flux cleaned = -0.000138811 Jy ! Total flux subtracted in 200 components = -0.000138811 Jy ! Clean residual min=-0.001787 max=0.001868 Jy/beam ! Clean residual mean=0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0701975 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 27 components and 0.0701975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073239Jy sigma=0.000850 ! Fit after self-cal, rms=0.073288Jy sigma=0.000850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.65063e-05 Jy ! Component: 100 - total flux cleaned = -0.000100583 Jy ! Component: 150 - total flux cleaned = -0.00012907 Jy ! Component: 200 - total flux cleaned = -0.000148123 Jy ! Total flux subtracted in 200 components = -0.000148123 Jy ! Clean residual min=-0.001767 max=0.001855 Jy/beam ! Clean residual mean=0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0700494 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.0700494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073285Jy sigma=0.000850 ! Fit after self-cal, rms=0.073293Jy sigma=0.000850 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073293Jy sigma=0.000850 ! Fit after self-cal, rms=0.073465Jy sigma=0.000850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.475 mas, bmaj=4.763 mas, bpa=-61.87 degrees ! Estimated noise=511.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.06571e-06 Jy ! Component: 100 - total flux cleaned = 4.60819e-05 Jy ! Component: 150 - total flux cleaned = 4.6841e-05 Jy ! Component: 200 - total flux cleaned = 3.52115e-05 Jy ! Total flux subtracted in 200 components = 3.52115e-05 Jy ! Clean residual min=-0.001752 max=0.001847 Jy/beam ! Clean residual mean=0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0700846 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0700846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073463Jy sigma=0.000850 ! Fit after self-cal, rms=0.073479Jy sigma=0.000850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.56113e-05 Jy ! Component: 100 - total flux cleaned = -2.7736e-05 Jy ! Component: 150 - total flux cleaned = -4.37435e-05 Jy ! Component: 200 - total flux cleaned = -5.80925e-05 Jy ! Total flux subtracted in 200 components = -5.80925e-05 Jy ! Clean residual min=-0.001745 max=0.001837 Jy/beam ! Clean residual mean=0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0700265 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0700265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073477Jy sigma=0.000850 ! Fit after self-cal, rms=0.073482Jy sigma=0.000850 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073482Jy sigma=0.000850 ! Fit after self-cal, rms=0.073553Jy sigma=0.000850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.24 mas, bmaj=9.314 mas, bpa=29.77 degrees ! Estimated noise=591.558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000469477 Jy ! Component: 100 - total flux cleaned = 0.00055709 Jy ! Component: 150 - total flux cleaned = 0.000570577 Jy ! Component: 200 - total flux cleaned = 0.000601856 Jy ! Total flux subtracted in 200 components = 0.000601856 Jy ! Clean residual min=-0.001994 max=0.002137 Jy/beam ! Clean residual mean=0.000007 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0706284 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 35 components and 0.0706284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073553Jy sigma=0.000850 ! Fit after self-cal, rms=0.073542Jy sigma=0.000850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121457 Jy ! Component: 100 - total flux cleaned = 0.000145627 Jy ! Component: 150 - total flux cleaned = 0.000165772 Jy ! Component: 200 - total flux cleaned = 0.000183541 Jy ! Total flux subtracted in 200 components = 0.000183541 Jy ! Clean residual min=-0.002022 max=0.002122 Jy/beam ! Clean residual mean=0.000008 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0708119 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.0708119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073543Jy sigma=0.000850 ! Fit after self-cal, rms=0.073537Jy sigma=0.000850 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=4.754 mas, bpa=-62.76 degrees ! Estimated noise=511.377 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.47 x 4.754 at -62.76 degrees (North through East) ! Clean map min=-0.0017958 max=0.069464 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=3.897 mas, bpa=-56.09 degrees ! Estimated noise=880.321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054594 Jy ! Component: 100 - total flux cleaned = 0.0667249 Jy ! Component: 150 - total flux cleaned = 0.0692674 Jy ! Component: 200 - total flux cleaned = 0.0698931 Jy ! Total flux subtracted in 200 components = 0.0698931 Jy ! Clean residual min=-0.003202 max=0.002887 Jy/beam ! Clean residual mean=0.000001 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0698931 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0698931 Jy ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=4.754 mas, bpa=-62.76 degrees ! Estimated noise=511.377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188218 Jy ! Component: 100 - total flux cleaned = 0.00269886 Jy ! Component: 150 - total flux cleaned = 0.00295327 Jy ! Component: 200 - total flux cleaned = 0.00306205 Jy ! Total flux subtracted in 200 components = 0.00306205 Jy ! Clean residual min=-0.001792 max=0.001943 Jy/beam ! Clean residual mean=0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0729551 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.0729551 Jy ! Inverting map ! Added new window around map position (126.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166338 Jy ! Component: 100 - total flux cleaned = 0.00250834 Jy ! Component: 150 - total flux cleaned = 0.00297993 Jy ! Component: 200 - total flux cleaned = 0.00332131 Jy ! Total flux subtracted in 200 components = 0.00332131 Jy ! Clean residual min=-0.001577 max=0.001602 Jy/beam ! Clean residual mean=-0.000003 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0762764 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.0762764 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.24 mas, bmaj=9.314 mas, bpa=29.77 degrees ! Estimated noise=591.558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664288 Jy ! Component: 100 - total flux cleaned = 0.00114605 Jy ! Component: 150 - total flux cleaned = 0.00139967 Jy ! Component: 200 - total flux cleaned = 0.00153513 Jy ! Total flux subtracted in 200 components = 0.00153513 Jy ! Clean residual min=-0.001494 max=0.001231 Jy/beam ! Clean residual mean=-0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0778115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119604 Jy ! Component: 100 - total flux cleaned = 0.000236108 Jy ! Component: 150 - total flux cleaned = 0.000350839 Jy ! Component: 200 - total flux cleaned = 0.000446509 Jy ! Total flux subtracted in 200 components = 0.000446509 Jy ! Clean residual min=-0.001471 max=0.001202 Jy/beam ! Clean residual mean=-0.000004 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0782581 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 0.0782581 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=4.754 mas, bpa=-62.76 degrees ! Estimated noise=511.377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.31849e-05 Jy ! Component: 100 - total flux cleaned = -0.000160266 Jy ! Component: 150 - total flux cleaned = -0.000248976 Jy ! Component: 200 - total flux cleaned = -0.000298404 Jy ! Total flux subtracted in 200 components = -0.000298404 Jy ! Clean residual min=-0.001367 max=0.001427 Jy/beam ! Clean residual mean=-0.000002 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0779596 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.0779596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073447Jy sigma=0.000849 ! Fit after self-cal, rms=0.073437Jy sigma=0.000849 wmodel J0913+4402_S_2014_01_04_pus_map.mod ! Writing 83 model components to file: J0913+4402_S_2014_01_04_pus_map.mod wobs J0913+4402_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0913+4402_S_2014_01_04_pus_uvs.fits wwins J0913+4402_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0913+4402_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108071 Jy ! Component: 100 - total flux cleaned = 0.00018261 Jy ! Component: 150 - total flux cleaned = 0.000182887 Jy ! Component: 200 - total flux cleaned = 0.000228626 Jy ! Component: 250 - total flux cleaned = 0.000272094 Jy ! Component: 300 - total flux cleaned = 0.000334352 Jy ! Component: 350 - total flux cleaned = 0.000314261 Jy ! Component: 400 - total flux cleaned = 0.000314346 Jy ! Component: 450 - total flux cleaned = 0.000333562 Jy ! Component: 500 - total flux cleaned = 0.000315196 Jy ! Component: 550 - total flux cleaned = 0.000333612 Jy ! Component: 600 - total flux cleaned = 0.000351682 Jy ! Component: 650 - total flux cleaned = 0.000369105 Jy ! Component: 700 - total flux cleaned = 0.000435871 Jy ! Component: 750 - total flux cleaned = 0.000517669 Jy ! Component: 800 - total flux cleaned = 0.000581742 Jy ! Component: 850 - total flux cleaned = 0.000676405 Jy ! Component: 900 - total flux cleaned = 0.00076939 Jy ! Component: 950 - total flux cleaned = 0.000815278 Jy ! Component: 1000 - total flux cleaned = 0.0010403 Jy ! Component: 1050 - total flux cleaned = 0.00109892 Jy ! Component: 1100 - total flux cleaned = 0.00120045 Jy ! Component: 1150 - total flux cleaned = 0.00132928 Jy ! Component: 1200 - total flux cleaned = 0.00148413 Jy ! Component: 1250 - total flux cleaned = 0.00160895 Jy ! Component: 1300 - total flux cleaned = 0.00170457 Jy ! Component: 1350 - total flux cleaned = 0.0017585 Jy ! Component: 1400 - total flux cleaned = 0.0018649 Jy ! Component: 1450 - total flux cleaned = 0.00191749 Jy ! Component: 1500 - total flux cleaned = 0.00199541 Jy ! Component: 1550 - total flux cleaned = 0.00205959 Jy ! Component: 1600 - total flux cleaned = 0.00212324 Jy ! Component: 1650 - total flux cleaned = 0.0022236 Jy ! Component: 1700 - total flux cleaned = 0.00226054 Jy ! Component: 1750 - total flux cleaned = 0.00234638 Jy ! Component: 1800 - total flux cleaned = 0.00240695 Jy ! Component: 1850 - total flux cleaned = 0.00246698 Jy ! Component: 1900 - total flux cleaned = 0.00253828 Jy ! Component: 1950 - total flux cleaned = 0.00263232 Jy ! Component: 2000 - total flux cleaned = 0.00270224 Jy ! Component: 2050 - total flux cleaned = 0.00274838 Jy ! Component: 2100 - total flux cleaned = 0.00281709 Jy ! Component: 2150 - total flux cleaned = 0.00287377 Jy ! Component: 2200 - total flux cleaned = 0.00292996 Jy ! Component: 2250 - total flux cleaned = 0.00295223 Jy ! Component: 2300 - total flux cleaned = 0.00302982 Jy ! Component: 2350 - total flux cleaned = 0.00305185 Jy ! Component: 2400 - total flux cleaned = 0.00314991 Jy ! Component: 2450 - total flux cleaned = 0.00319311 Jy ! Component: 2500 - total flux cleaned = 0.00319323 Jy ! Component: 2550 - total flux cleaned = 0.00329955 Jy ! Component: 2600 - total flux cleaned = 0.00334186 Jy ! Component: 2650 - total flux cleaned = 0.0033943 Jy ! Component: 2700 - total flux cleaned = 0.00346706 Jy ! Component: 2750 - total flux cleaned = 0.00350833 Jy ! Component: 2800 - total flux cleaned = 0.00356969 Jy ! Component: 2850 - total flux cleaned = 0.00362038 Jy ! Component: 2900 - total flux cleaned = 0.0036808 Jy ! Component: 2950 - total flux cleaned = 0.00371074 Jy ! Component: 3000 - total flux cleaned = 0.00377026 Jy ! Component: 3050 - total flux cleaned = 0.00379978 Jy ! Component: 3100 - total flux cleaned = 0.00384869 Jy ! Component: 3150 - total flux cleaned = 0.00391665 Jy ! Component: 3200 - total flux cleaned = 0.00396473 Jy ! Component: 3250 - total flux cleaned = 0.00400295 Jy ! Component: 3300 - total flux cleaned = 0.00404101 Jy ! Component: 3350 - total flux cleaned = 0.00410707 Jy ! Component: 3400 - total flux cleaned = 0.00412583 Jy ! Component: 3450 - total flux cleaned = 0.00417245 Jy ! Component: 3500 - total flux cleaned = 0.00420024 Jy ! Component: 3550 - total flux cleaned = 0.00421862 Jy ! Component: 3600 - total flux cleaned = 0.0042552 Jy ! Component: 3650 - total flux cleaned = 0.00427341 Jy ! Component: 3700 - total flux cleaned = 0.00430947 Jy ! Component: 3750 - total flux cleaned = 0.00434534 Jy ! Component: 3800 - total flux cleaned = 0.00433644 Jy ! Component: 3850 - total flux cleaned = 0.00436305 Jy ! Component: 3900 - total flux cleaned = 0.00438951 Jy ! Component: 3950 - total flux cleaned = 0.00439829 Jy ! Component: 4000 - total flux cleaned = 0.00443331 Jy ! Component: 4050 - total flux cleaned = 0.00444202 Jy ! Total flux subtracted in 4096 components = 0.00446795 Jy ! Clean residual min=-0.000571 max=0.000623 Jy/beam ! Clean residual mean=0.000003 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0824276 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 319 components and 0.0824277 Jy ![Exited script file: muppet] wmap "J0913+4402_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.47 x 4.754 at -62.76 degrees (North through East) ! Clean map min=-0.0012302 max=0.069909 Jy/beam ! Writing clean map to FITS file: J0913+4402_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0699092 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141987 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.609308 0.609308 1.21862 2.43723 4.87447 9.74894 19.4979 38.9957 77.9915 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.47 x 4.754 at -62.76 degrees (North through East) ! Clean map min=-0.0012302 max=0.069909 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0913+4402_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:22:39 2017