! Started logfile: J0911+3349_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:01:00 2016 obs J0911+3349_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0911+3349_S_2014_08_09_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772031 visibilities/baseline/integration-bin. ! Found source: J0911+3349 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 16120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0911+3349_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936883Jy sigma=0.010562 ! Fit after self-cal, rms=0.895063Jy sigma=0.010068 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=4.577 mas, bpa=-10.07 degrees ! Estimated noise=969.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0813539 Jy ! Component: 100 - total flux cleaned = 0.114256 Jy ! Total flux subtracted in 100 components = 0.114256 Jy ! Clean residual min=-0.012112 max=0.015843 Jy/beam ! Clean residual mean=0.000040 rms=0.003875 Jy/beam ! Combined flux in latest and established models = 0.114256 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.114256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146456Jy sigma=0.001867 ! Fit after self-cal, rms=0.146276Jy sigma=0.001866 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=5.742 mas, bpa=-8.676 degrees ! Estimated noise=502.513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283588 Jy ! Component: 100 - total flux cleaned = 0.0440121 Jy ! Component: 150 - total flux cleaned = 0.0534769 Jy ! Component: 200 - total flux cleaned = 0.0593465 Jy ! Total flux subtracted in 200 components = 0.0593465 Jy ! Clean residual min=-0.012123 max=0.013666 Jy/beam ! Clean residual mean=0.000079 rms=0.004733 Jy/beam ! Combined flux in latest and established models = 0.173603 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 0.173603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140901Jy sigma=0.001808 ! Fit after self-cal, rms=0.140798Jy sigma=0.001808 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.94 HN 1.16 KP 1.23 ! LA 1.17 MK 1.01 NL 1.28 OV 1.12 ! PT 0.72 SC 1.13 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.11 HN 1.18 KP 1.12 ! LA 1.10 MK 0.86 NL 1.25 OV 1.12 ! PT 0.75 SC 1.20 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.24 HN 1.19 KP 0.97 ! LA 0.87 MK 0.90 NL 1.23 OV 1.03 ! PT 0.78 SC 1.14 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.09 HN 1.07 KP 0.94 ! LA 0.82 MK 0.91 NL 1.33 OV 1.08 ! PT 0.83 SC 1.13 ! ! ! Fit before self-cal, rms=0.140798Jy sigma=0.001808 ! Fit after self-cal, rms=0.112702Jy sigma=0.001776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=5.804 mas, bpa=-11.27 degrees ! Estimated noise=507.259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209121 Jy ! Component: 100 - total flux cleaned = 0.00232337 Jy ! Component: 150 - total flux cleaned = 0.00239237 Jy ! Component: 200 - total flux cleaned = 0.00251231 Jy ! Total flux subtracted in 200 components = 0.00251231 Jy ! Clean residual min=-0.012496 max=0.015408 Jy/beam ! Clean residual mean=0.000044 rms=0.004355 Jy/beam ! Combined flux in latest and established models = 0.176115 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.176115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112508Jy sigma=0.001777 ! Fit after self-cal, rms=0.113279Jy sigma=0.001774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113279Jy sigma=0.001774 ! Fit after self-cal, rms=0.145974Jy sigma=0.001728 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=5.747 mas, bpa=-14.88 degrees ! Estimated noise=534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00978335 Jy ! Component: 100 - total flux cleaned = 0.0116008 Jy ! Component: 150 - total flux cleaned = 0.0121249 Jy ! Component: 200 - total flux cleaned = 0.0124304 Jy ! Total flux subtracted in 200 components = 0.0124304 Jy ! Clean residual min=-0.009657 max=0.027614 Jy/beam ! Clean residual mean=-0.000004 rms=0.004014 Jy/beam ! Combined flux in latest and established models = 0.188545 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.188545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143499Jy sigma=0.001731 ! Fit after self-cal, rms=0.145407Jy sigma=0.001724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (32.5, 46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234042 Jy ! Component: 100 - total flux cleaned = 0.0328409 Jy ! Component: 150 - total flux cleaned = 0.0351991 Jy ! Component: 200 - total flux cleaned = 0.0362587 Jy ! Total flux subtracted in 200 components = 0.0362587 Jy ! Clean residual min=-0.011866 max=0.022174 Jy/beam ! Clean residual mean=-0.000013 rms=0.003288 Jy/beam ! Combined flux in latest and established models = 0.224804 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 105 components and 0.224804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139647Jy sigma=0.001687 ! Fit after self-cal, rms=0.138599Jy sigma=0.001675 ! Inverting map ! Added new window around map position (-33, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157914 Jy ! Component: 100 - total flux cleaned = 0.0203508 Jy ! Component: 150 - total flux cleaned = 0.0230374 Jy ! Component: 200 - total flux cleaned = 0.0246342 Jy ! Total flux subtracted in 200 components = 0.0246342 Jy ! Clean residual min=-0.010480 max=0.011093 Jy/beam ! Clean residual mean=-0.000016 rms=0.002669 Jy/beam ! Combined flux in latest and established models = 0.249438 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 142 components and 0.249438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134791Jy sigma=0.001657 ! Fit after self-cal, rms=0.134205Jy sigma=0.001655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134205Jy sigma=0.001655 ! Fit after self-cal, rms=0.114942Jy sigma=0.001634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.067 mas, bmaj=5.65 mas, bpa=-11.23 degrees ! Estimated noise=539.926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101249 Jy ! Component: 100 - total flux cleaned = 0.0139162 Jy ! Component: 150 - total flux cleaned = 0.0153555 Jy ! Component: 200 - total flux cleaned = 0.0163046 Jy ! Total flux subtracted in 200 components = 0.0163046 Jy ! Clean residual min=-0.007576 max=0.008247 Jy/beam ! Clean residual mean=0.000009 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.265743 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 178 components and 0.265743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113730Jy sigma=0.001624 ! Fit after self-cal, rms=0.113133Jy sigma=0.001623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (67.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676848 Jy ! Component: 100 - total flux cleaned = 0.00881894 Jy ! Component: 150 - total flux cleaned = 0.0092661 Jy ! Component: 200 - total flux cleaned = 0.00953701 Jy ! Total flux subtracted in 200 components = 0.00953701 Jy ! Clean residual min=-0.007145 max=0.007348 Jy/beam ! Clean residual mean=0.000006 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.27528 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 206 components and 0.27528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112349Jy sigma=0.001620 ! Fit after self-cal, rms=0.112265Jy sigma=0.001619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112265Jy sigma=0.001619 ! Fit after self-cal, rms=0.111098Jy sigma=0.001617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.881 mas, bmaj=9.012 mas, bpa=-59.72 degrees ! Estimated noise=620.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249986 Jy ! Component: 100 - total flux cleaned = 0.00463357 Jy ! Component: 150 - total flux cleaned = 0.00575804 Jy ! Component: 200 - total flux cleaned = 0.00609036 Jy ! Total flux subtracted in 200 components = 0.00609036 Jy ! Clean residual min=-0.007752 max=0.007375 Jy/beam ! Clean residual mean=0.000027 rms=0.002176 Jy/beam ! Combined flux in latest and established models = 0.28137 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 224 components and 0.28137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110797Jy sigma=0.001616 ! Fit after self-cal, rms=0.110664Jy sigma=0.001615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689909 Jy ! Component: 100 - total flux cleaned = 0.000389508 Jy ! Component: 150 - total flux cleaned = 0.000203636 Jy ! Component: 200 - total flux cleaned = 0.000201383 Jy ! Total flux subtracted in 200 components = 0.000201383 Jy ! Clean residual min=-0.007901 max=0.007131 Jy/beam ! Clean residual mean=0.000027 rms=0.002138 Jy/beam ! Combined flux in latest and established models = 0.281572 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 239 components and 0.281572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110546Jy sigma=0.001615 ! Fit after self-cal, rms=0.110516Jy sigma=0.001615 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.069 mas, bmaj=5.677 mas, bpa=-10.74 degrees ! Estimated noise=541.312 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.069 x 5.677 at -10.74 degrees (North through East) ! Clean map min=-0.0064548 max=0.10974 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=4.438 mas, bpa=-10.72 degrees ! Estimated noise=1068.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0891319 Jy ! Component: 100 - total flux cleaned = 0.131454 Jy ! Component: 150 - total flux cleaned = 0.16105 Jy ! Component: 200 - total flux cleaned = 0.182731 Jy ! Total flux subtracted in 200 components = 0.182731 Jy ! Clean residual min=-0.009716 max=0.013556 Jy/beam ! Clean residual mean=0.000013 rms=0.002839 Jy/beam ! Combined flux in latest and established models = 0.182731 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.182731 Jy ! Inverting map and beam ! Estimated beam: bmin=4.069 mas, bmaj=5.677 mas, bpa=-10.74 degrees ! Estimated noise=541.312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223138 Jy ! Component: 100 - total flux cleaned = 0.0384274 Jy ! Component: 150 - total flux cleaned = 0.0509876 Jy ! Component: 200 - total flux cleaned = 0.0610093 Jy ! Total flux subtracted in 200 components = 0.0610093 Jy ! Clean residual min=-0.007845 max=0.010058 Jy/beam ! Clean residual mean=0.000023 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 0.24374 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 66 components and 0.24374 Jy ! Inverting map ! Added new window around map position (3, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101185 Jy ! Component: 100 - total flux cleaned = 0.0170037 Jy ! Component: 150 - total flux cleaned = 0.0212844 Jy ! Component: 200 - total flux cleaned = 0.0243738 Jy ! Total flux subtracted in 200 components = 0.0243738 Jy ! Clean residual min=-0.007355 max=0.006795 Jy/beam ! Clean residual mean=0.000019 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.268114 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 111 components and 0.268114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.881 mas, bmaj=9.012 mas, bpa=-59.72 degrees ! Estimated noise=620.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513604 Jy ! Component: 100 - total flux cleaned = 0.00764756 Jy ! Component: 150 - total flux cleaned = 0.00905371 Jy ! Component: 200 - total flux cleaned = 0.0104405 Jy ! Total flux subtracted in 200 components = 0.0104405 Jy ! Clean residual min=-0.007980 max=0.006704 Jy/beam ! Clean residual mean=0.000025 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.278555 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110867 Jy ! Component: 100 - total flux cleaned = 0.00186815 Jy ! Component: 150 - total flux cleaned = 0.00268624 Jy ! Component: 200 - total flux cleaned = 0.00333252 Jy ! Total flux subtracted in 200 components = 0.00333252 Jy ! Clean residual min=-0.007704 max=0.006578 Jy/beam ! Clean residual mean=0.000024 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.281887 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 190 components and 0.281887 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.069 mas, bmaj=5.677 mas, bpa=-10.74 degrees ! Estimated noise=541.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.31864e-06 Jy ! Component: 100 - total flux cleaned = -0.000160087 Jy ! Component: 150 - total flux cleaned = 7.57436e-05 Jy ! Component: 200 - total flux cleaned = 0.000184969 Jy ! Total flux subtracted in 200 components = 0.000184969 Jy ! Clean residual min=-0.006602 max=0.005546 Jy/beam ! Clean residual mean=0.000016 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.282072 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 224 components and 0.282072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110005Jy sigma=0.001613 ! Fit after self-cal, rms=0.109696Jy sigma=0.001612 wmodel J0911+3349_S_2014_08_09_pus_map.mod ! Writing 224 model components to file: J0911+3349_S_2014_08_09_pus_map.mod wobs J0911+3349_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0911+3349_S_2014_08_09_pus_uvs.fits wwins J0911+3349_S_2014_08_09_pus_map.win ! wwins: Wrote 5 windows to J0911+3349_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000999298 Jy ! Component: 100 - total flux cleaned = -0.000371236 Jy ! Component: 150 - total flux cleaned = 0.000307268 Jy ! Component: 200 - total flux cleaned = 0.000867735 Jy ! Component: 250 - total flux cleaned = 0.00132663 Jy ! Component: 300 - total flux cleaned = 0.00169294 Jy ! Component: 350 - total flux cleaned = 0.00183544 Jy ! Component: 400 - total flux cleaned = 0.00218007 Jy ! Component: 450 - total flux cleaned = 0.00257989 Jy ! Component: 500 - total flux cleaned = 0.00283743 Jy ! Component: 550 - total flux cleaned = 0.00302595 Jy ! Component: 600 - total flux cleaned = 0.00339304 Jy ! Component: 650 - total flux cleaned = 0.00357072 Jy ! Component: 700 - total flux cleaned = 0.00380378 Jy ! Component: 750 - total flux cleaned = 0.00402978 Jy ! Component: 800 - total flux cleaned = 0.00435977 Jy ! Component: 850 - total flux cleaned = 0.00441287 Jy ! Component: 900 - total flux cleaned = 0.00451765 Jy ! Component: 950 - total flux cleaned = 0.00467132 Jy ! Component: 1000 - total flux cleaned = 0.00477224 Jy ! Component: 1050 - total flux cleaned = 0.00491937 Jy ! Component: 1100 - total flux cleaned = 0.00487079 Jy ! Component: 1150 - total flux cleaned = 0.00487068 Jy ! Component: 1200 - total flux cleaned = 0.00491655 Jy ! Component: 1250 - total flux cleaned = 0.00473324 Jy ! Component: 1300 - total flux cleaned = 0.00473346 Jy ! Component: 1350 - total flux cleaned = 0.004644 Jy ! Component: 1400 - total flux cleaned = 0.00451413 Jy ! Component: 1450 - total flux cleaned = 0.00442867 Jy ! Component: 1500 - total flux cleaned = 0.0042619 Jy ! Component: 1550 - total flux cleaned = 0.00434437 Jy ! Component: 1600 - total flux cleaned = 0.00422261 Jy ! Component: 1650 - total flux cleaned = 0.00414306 Jy ! Component: 1700 - total flux cleaned = 0.00418321 Jy ! Component: 1750 - total flux cleaned = 0.00410544 Jy ! Component: 1800 - total flux cleaned = 0.00410578 Jy ! Component: 1850 - total flux cleaned = 0.00410558 Jy ! Component: 1900 - total flux cleaned = 0.00403052 Jy ! Component: 1950 - total flux cleaned = 0.00392029 Jy ! Component: 2000 - total flux cleaned = 0.00395674 Jy ! Component: 2050 - total flux cleaned = 0.00388483 Jy ! Component: 2100 - total flux cleaned = 0.00384945 Jy ! Component: 2150 - total flux cleaned = 0.00388475 Jy ! Component: 2200 - total flux cleaned = 0.00391936 Jy ! Component: 2250 - total flux cleaned = 0.00388598 Jy ! Component: 2300 - total flux cleaned = 0.0039526 Jy ! Component: 2350 - total flux cleaned = 0.00395259 Jy ! Component: 2400 - total flux cleaned = 0.00398523 Jy ! Component: 2450 - total flux cleaned = 0.00388773 Jy ! Component: 2500 - total flux cleaned = 0.00391997 Jy ! Component: 2550 - total flux cleaned = 0.00385671 Jy ! Component: 2600 - total flux cleaned = 0.00385709 Jy ! Component: 2650 - total flux cleaned = 0.00382572 Jy ! Component: 2700 - total flux cleaned = 0.00376449 Jy ! Component: 2750 - total flux cleaned = 0.00379484 Jy ! Component: 2800 - total flux cleaned = 0.00376451 Jy ! Component: 2850 - total flux cleaned = 0.0037346 Jy ! Component: 2900 - total flux cleaned = 0.00364622 Jy ! Component: 2950 - total flux cleaned = 0.00367575 Jy ! Component: 3000 - total flux cleaned = 0.00370474 Jy ! Component: 3050 - total flux cleaned = 0.00376186 Jy ! Component: 3100 - total flux cleaned = 0.00384685 Jy ! Component: 3150 - total flux cleaned = 0.00381908 Jy ! Component: 3200 - total flux cleaned = 0.00387456 Jy ! Component: 3250 - total flux cleaned = 0.00387452 Jy ! Component: 3300 - total flux cleaned = 0.00392944 Jy ! Component: 3350 - total flux cleaned = 0.00403791 Jy ! Component: 3400 - total flux cleaned = 0.00406487 Jy ! Component: 3450 - total flux cleaned = 0.00411808 Jy ! Component: 3500 - total flux cleaned = 0.00417119 Jy ! Component: 3550 - total flux cleaned = 0.00425006 Jy ! Component: 3600 - total flux cleaned = 0.00435437 Jy ! Component: 3650 - total flux cleaned = 0.00438022 Jy ! Component: 3700 - total flux cleaned = 0.0045594 Jy ! Component: 3750 - total flux cleaned = 0.00466113 Jy ! Component: 3800 - total flux cleaned = 0.00471126 Jy ! Component: 3850 - total flux cleaned = 0.00483643 Jy ! Component: 3900 - total flux cleaned = 0.00486108 Jy ! Component: 3950 - total flux cleaned = 0.00493519 Jy ! Component: 4000 - total flux cleaned = 0.00495991 Jy ! Component: 4050 - total flux cleaned = 0.00515495 Jy ! Total flux subtracted in 4096 components = 0.00517944 Jy ! Clean residual min=-0.001319 max=0.001296 Jy/beam ! Clean residual mean=0.000004 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.287252 Jy keep ! Adding 361 model components to the UV plane model. ! The established model now contains 584 components and 0.287252 Jy ![Exited script file: muppet] wmap "J0911+3349_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.069 x 5.677 at -10.74 degrees (North through East) ! Clean map min=-0.0056748 max=0.11196 Jy/beam ! Writing clean map to FITS file: J0911+3349_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111961 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000457571 device "J0911+3349_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0911+3349_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22606 1.22606 2.45213 4.90426 9.80851 19.617 39.234 78.4681 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.069 x 5.677 at -10.74 degrees (North through East) ! Clean map min=-0.0056748 max=0.11196 Jy/beam quit ! Quitting program ! Log file J0911+3349_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:01:06 2016