! Started logfile: J0911+1958_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:00:54 2016 obs J0911+1958_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0911+1958_S_2014_08_09_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.452754 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0911+1958 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 9372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0911+1958_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 472 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 362 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 362 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 472 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929214Jy sigma=0.009450 ! Fit after self-cal, rms=0.854991Jy sigma=0.008704 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.369 mas, bmaj=9.537 mas, bpa=-30.28 degrees ! Estimated noise=1135.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110622 Jy ! Component: 100 - total flux cleaned = 0.145648 Jy ! Total flux subtracted in 100 components = 0.145648 Jy ! Clean residual min=-0.008725 max=0.014687 Jy/beam ! Clean residual mean=-0.000045 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 0.145648 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.145648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087955Jy sigma=0.000839 ! Fit after self-cal, rms=0.087823Jy sigma=0.000838 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.545 mas, bmaj=9.667 mas, bpa=-24.04 degrees ! Estimated noise=786.739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017044 Jy ! Component: 100 - total flux cleaned = 0.0242222 Jy ! Component: 150 - total flux cleaned = 0.0281454 Jy ! Component: 200 - total flux cleaned = 0.0305867 Jy ! Total flux subtracted in 200 components = 0.0305867 Jy ! Clean residual min=-0.004272 max=0.004092 Jy/beam ! Clean residual mean=-0.000026 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.176235 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 52 components and 0.176235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084442Jy sigma=0.000810 ! Fit after self-cal, rms=0.084388Jy sigma=0.000810 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.88 HN 1.00* KP 1.08 ! LA 1.08 MK 1.00* NL 1.01 OV 0.98 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 0.99 KP 1.05 ! LA 1.04 MK 1.00* NL 1.02 OV 1.00 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.17 HN 1.08 KP 0.94 ! LA 0.82 MK 1.00* NL 1.02 OV 0.94 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.09 HN 1.00* KP 0.88 ! LA 0.81 MK 1.00* NL 1.10 OV 1.00 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.084388Jy sigma=0.000810 ! Fit after self-cal, rms=0.080872Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.617 mas, bmaj=9.73 mas, bpa=-22.91 degrees ! Estimated noise=786.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351951 Jy ! Component: 100 - total flux cleaned = 0.00368387 Jy ! Component: 150 - total flux cleaned = 0.00342993 Jy ! Component: 200 - total flux cleaned = 0.00342619 Jy ! Total flux subtracted in 200 components = 0.00342619 Jy ! Clean residual min=-0.002727 max=0.002348 Jy/beam ! Clean residual mean=-0.000006 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.179661 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 0.179661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080690Jy sigma=0.000788 ! Fit after self-cal, rms=0.080672Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080672Jy sigma=0.000788 ! Fit after self-cal, rms=0.080563Jy sigma=0.000787 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.611 mas, bmaj=9.732 mas, bpa=-22.75 degrees ! Estimated noise=785.837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165047 Jy ! Component: 100 - total flux cleaned = 0.00199832 Jy ! Component: 150 - total flux cleaned = 0.00215607 Jy ! Component: 200 - total flux cleaned = 0.00224274 Jy ! Total flux subtracted in 200 components = 0.00224274 Jy ! Clean residual min=-0.002133 max=0.001866 Jy/beam ! Clean residual mean=-0.000007 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.181904 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 108 components and 0.181904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080515Jy sigma=0.000786 ! Fit after self-cal, rms=0.080510Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513237 Jy ! Component: 100 - total flux cleaned = 0.000620449 Jy ! Component: 150 - total flux cleaned = 0.000713497 Jy ! Component: 200 - total flux cleaned = 0.000735132 Jy ! Total flux subtracted in 200 components = 0.000735132 Jy ! Clean residual min=-0.002107 max=0.001805 Jy/beam ! Clean residual mean=-0.000006 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.182639 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 134 components and 0.182639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080494Jy sigma=0.000786 ! Fit after self-cal, rms=0.080491Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080491Jy sigma=0.000786 ! Fit after self-cal, rms=0.080494Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.608 mas, bmaj=9.737 mas, bpa=-22.6 degrees ! Estimated noise=785.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432292 Jy ! Component: 100 - total flux cleaned = 0.000587633 Jy ! Component: 150 - total flux cleaned = 0.000686479 Jy ! Component: 200 - total flux cleaned = 0.000758483 Jy ! Total flux subtracted in 200 components = 0.000758483 Jy ! Clean residual min=-0.002041 max=0.001787 Jy/beam ! Clean residual mean=-0.000006 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.183398 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 149 components and 0.183398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080483Jy sigma=0.000786 ! Fit after self-cal, rms=0.080482Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212093 Jy ! Component: 100 - total flux cleaned = 0.000244855 Jy ! Component: 150 - total flux cleaned = 0.000289964 Jy ! Component: 200 - total flux cleaned = 0.000303873 Jy ! Total flux subtracted in 200 components = 0.000303873 Jy ! Clean residual min=-0.002033 max=0.001761 Jy/beam ! Clean residual mean=-0.000006 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.183701 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 0.183701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080476Jy sigma=0.000786 ! Fit after self-cal, rms=0.080474Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080474Jy sigma=0.000786 ! Fit after self-cal, rms=0.080469Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.49 mas, bmaj=10.74 mas, bpa=-32.95 degrees ! Estimated noise=813.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.31324e-05 Jy ! Component: 100 - total flux cleaned = 0.00011885 Jy ! Component: 150 - total flux cleaned = 0.000148999 Jy ! Component: 200 - total flux cleaned = 0.000167096 Jy ! Total flux subtracted in 200 components = 0.000167096 Jy ! Clean residual min=-0.001874 max=0.002020 Jy/beam ! Clean residual mean=-0.000007 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.183868 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 184 components and 0.183868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080465Jy sigma=0.000786 ! Fit after self-cal, rms=0.080465Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.59141e-05 Jy ! Component: 100 - total flux cleaned = 0.000116746 Jy ! Component: 150 - total flux cleaned = 0.000162793 Jy ! Component: 200 - total flux cleaned = 0.000176756 Jy ! Total flux subtracted in 200 components = 0.000176756 Jy ! Clean residual min=-0.001870 max=0.002011 Jy/beam ! Clean residual mean=-0.000007 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.184045 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 196 components and 0.184045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080463Jy sigma=0.000786 ! Fit after self-cal, rms=0.080462Jy sigma=0.000786 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.6 mas, bmaj=9.745 mas, bpa=-22.52 degrees ! Estimated noise=785.333 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.6 x 9.745 at -22.52 degrees (North through East) ! Clean map min=-0.0019602 max=0.14463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.415 mas, bmaj=9.625 mas, bpa=-29.94 degrees ! Estimated noise=1142.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111097 Jy ! Component: 100 - total flux cleaned = 0.146347 Jy ! Component: 150 - total flux cleaned = 0.16171 Jy ! Component: 200 - total flux cleaned = 0.169885 Jy ! Total flux subtracted in 200 components = 0.169885 Jy ! Clean residual min=-0.003927 max=0.003990 Jy/beam ! Clean residual mean=-0.000026 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.169885 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.169885 Jy ! Inverting map and beam ! Estimated beam: bmin=8.6 mas, bmaj=9.745 mas, bpa=-22.52 degrees ! Estimated noise=785.333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510463 Jy ! Component: 100 - total flux cleaned = 0.00814811 Jy ! Component: 150 - total flux cleaned = 0.0101386 Jy ! Component: 200 - total flux cleaned = 0.0116601 Jy ! Total flux subtracted in 200 components = 0.0116601 Jy ! Clean residual min=-0.001761 max=0.001897 Jy/beam ! Clean residual mean=-0.000013 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.181545 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.181545 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.49 mas, bmaj=10.74 mas, bpa=-32.95 degrees ! Estimated noise=813.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110804 Jy ! Component: 100 - total flux cleaned = 0.00165044 Jy ! Component: 150 - total flux cleaned = 0.00197721 Jy ! Component: 200 - total flux cleaned = 0.00230859 Jy ! Total flux subtracted in 200 components = 0.00230859 Jy ! Clean residual min=-0.001684 max=0.002051 Jy/beam ! Clean residual mean=-0.000011 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.183853 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221494 Jy ! Component: 100 - total flux cleaned = 0.000340212 Jy ! Component: 150 - total flux cleaned = 0.000429988 Jy ! Component: 200 - total flux cleaned = 0.000478914 Jy ! Total flux subtracted in 200 components = 0.000478914 Jy ! Clean residual min=-0.001744 max=0.002071 Jy/beam ! Clean residual mean=-0.000010 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.184332 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 109 components and 0.184332 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.6 mas, bmaj=9.745 mas, bpa=-22.52 degrees ! Estimated noise=785.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113264 Jy ! Component: 100 - total flux cleaned = 0.000138371 Jy ! Component: 150 - total flux cleaned = 0.000179319 Jy ! Component: 200 - total flux cleaned = 0.000197012 Jy ! Total flux subtracted in 200 components = 0.000197012 Jy ! Clean residual min=-0.001956 max=0.001780 Jy/beam ! Clean residual mean=-0.000007 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.184529 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 0.184529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080472Jy sigma=0.000786 ! Fit after self-cal, rms=0.080472Jy sigma=0.000786 wmodel J0911+1958_S_2014_08_09_pus_map.mod ! Writing 131 model components to file: J0911+1958_S_2014_08_09_pus_map.mod wobs J0911+1958_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0911+1958_S_2014_08_09_pus_uvs.fits wwins J0911+1958_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J0911+1958_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000315063 Jy ! Component: 100 - total flux cleaned = -0.000567245 Jy ! Component: 150 - total flux cleaned = -0.000644159 Jy ! Component: 200 - total flux cleaned = -0.000791554 Jy ! Component: 250 - total flux cleaned = -0.00102331 Jy ! Component: 300 - total flux cleaned = -0.00113385 Jy ! Component: 350 - total flux cleaned = -0.00130521 Jy ! Component: 400 - total flux cleaned = -0.00142858 Jy ! Component: 450 - total flux cleaned = -0.00154762 Jy ! Component: 500 - total flux cleaned = -0.00162358 Jy ! Component: 550 - total flux cleaned = -0.00167882 Jy ! Component: 600 - total flux cleaned = -0.00167894 Jy ! Component: 650 - total flux cleaned = -0.00169655 Jy ! Component: 700 - total flux cleaned = -0.00174751 Jy ! Component: 750 - total flux cleaned = -0.00178039 Jy ! Component: 800 - total flux cleaned = -0.0018447 Jy ! Component: 850 - total flux cleaned = -0.00187564 Jy ! Component: 900 - total flux cleaned = -0.00192124 Jy ! Component: 950 - total flux cleaned = -0.00199597 Jy ! Component: 1000 - total flux cleaned = -0.00199602 Jy ! Component: 1050 - total flux cleaned = -0.00205356 Jy ! Component: 1100 - total flux cleaned = -0.00208192 Jy ! Component: 1150 - total flux cleaned = -0.00211004 Jy ! Component: 1200 - total flux cleaned = -0.0021238 Jy ! Component: 1250 - total flux cleaned = -0.00213748 Jy ! Component: 1300 - total flux cleaned = -0.00219065 Jy ! Component: 1350 - total flux cleaned = -0.00220354 Jy ! Component: 1400 - total flux cleaned = -0.00222934 Jy ! Component: 1450 - total flux cleaned = -0.00224212 Jy ! Component: 1500 - total flux cleaned = -0.00229233 Jy ! Component: 1550 - total flux cleaned = -0.00234177 Jy ! Component: 1600 - total flux cleaned = -0.00234172 Jy ! Component: 1650 - total flux cleaned = -0.00237804 Jy ! Component: 1700 - total flux cleaned = -0.00242577 Jy ! Component: 1750 - total flux cleaned = -0.00243747 Jy ! Component: 1800 - total flux cleaned = -0.00246045 Jy ! Component: 1850 - total flux cleaned = -0.00249463 Jy ! Component: 1900 - total flux cleaned = -0.00250595 Jy ! Component: 1950 - total flux cleaned = -0.00253957 Jy ! Component: 2000 - total flux cleaned = -0.00259482 Jy ! Component: 2050 - total flux cleaned = -0.00262757 Jy ! Component: 2100 - total flux cleaned = -0.00268157 Jy ! Component: 2150 - total flux cleaned = -0.00274583 Jy ! Component: 2200 - total flux cleaned = -0.00280929 Jy ! Component: 2250 - total flux cleaned = -0.00285124 Jy ! Component: 2300 - total flux cleaned = -0.00291372 Jy ! Component: 2350 - total flux cleaned = -0.00295489 Jy ! Component: 2400 - total flux cleaned = -0.0030161 Jy ! Component: 2450 - total flux cleaned = -0.00301608 Jy ! Component: 2500 - total flux cleaned = -0.00306615 Jy ! Component: 2550 - total flux cleaned = -0.0030761 Jy ! Component: 2600 - total flux cleaned = -0.0031058 Jy ! Component: 2650 - total flux cleaned = -0.00315461 Jy ! Component: 2700 - total flux cleaned = -0.00317392 Jy ! Component: 2750 - total flux cleaned = -0.00319328 Jy ! Component: 2800 - total flux cleaned = -0.00322198 Jy ! Component: 2850 - total flux cleaned = -0.00324102 Jy ! Component: 2900 - total flux cleaned = -0.00327886 Jy ! Component: 2950 - total flux cleaned = -0.00331639 Jy ! Component: 3000 - total flux cleaned = -0.00333507 Jy ! Component: 3050 - total flux cleaned = -0.00334439 Jy ! Component: 3100 - total flux cleaned = -0.00339969 Jy ! Component: 3150 - total flux cleaned = -0.00341797 Jy ! Component: 3200 - total flux cleaned = -0.00341802 Jy ! Component: 3250 - total flux cleaned = -0.00343617 Jy ! Component: 3300 - total flux cleaned = -0.0034542 Jy ! Component: 3350 - total flux cleaned = -0.00349905 Jy ! Component: 3400 - total flux cleaned = -0.00348116 Jy ! Component: 3450 - total flux cleaned = -0.00350782 Jy ! Component: 3500 - total flux cleaned = -0.00352547 Jy ! Component: 3550 - total flux cleaned = -0.00354308 Jy ! Component: 3600 - total flux cleaned = -0.0035693 Jy ! Component: 3650 - total flux cleaned = -0.00359533 Jy ! Component: 3700 - total flux cleaned = -0.00359531 Jy ! Component: 3750 - total flux cleaned = -0.00361265 Jy ! Component: 3800 - total flux cleaned = -0.00365565 Jy ! Component: 3850 - total flux cleaned = -0.00368994 Jy ! Component: 3900 - total flux cleaned = -0.0037326 Jy ! Component: 3950 - total flux cleaned = -0.00375807 Jy ! Component: 4000 - total flux cleaned = -0.00381735 Jy ! Component: 4050 - total flux cleaned = -0.00385108 Jy ! Total flux subtracted in 4096 components = -0.0038763 Jy ! Clean residual min=-0.000473 max=0.000484 Jy/beam ! Clean residual mean=-0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.180653 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 446 components and 0.180653 Jy ![Exited script file: muppet] wmap "J0911+1958_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.6 x 9.745 at -22.52 degrees (North through East) ! Clean map min=-0.0016662 max=0.14468 Jy/beam ! Writing clean map to FITS file: J0911+1958_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144679 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156145 device "J0911+1958_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0911+1958_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.323774 0.323774 0.647548 1.2951 2.59019 5.18039 10.3608 20.7215 41.4431 82.8862 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.6 x 9.745 at -22.52 degrees (North through East) ! Clean map min=-0.0016662 max=0.14468 Jy/beam quit ! Quitting program ! Log file J0911+1958_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:01:00 2016