! Started logfile: J0909-0231_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:22:11 2017 obs J0909-0231_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0909-0231_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.679725 visibilities/baseline/integration-bin. ! Found source: J0909-0231 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 11452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0909-0231_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.813662Jy sigma=0.009860 ! Fit after self-cal, rms=0.763027Jy sigma=0.009332 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=5.994 mas, bpa=0.03397 degrees ! Estimated noise=881.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173998 Jy ! Component: 100 - total flux cleaned = 0.234358 Jy ! Total flux subtracted in 100 components = 0.234358 Jy ! Clean residual min=-0.015054 max=0.028156 Jy/beam ! Clean residual mean=-0.000002 rms=0.004965 Jy/beam ! Combined flux in latest and established models = 0.234358 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.234358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123433Jy sigma=0.001385 ! Fit after self-cal, rms=0.123308Jy sigma=0.001383 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=6.78 mas, bpa=0.4562 degrees ! Estimated noise=566.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0521967 Jy ! Component: 100 - total flux cleaned = 0.0794541 Jy ! Component: 150 - total flux cleaned = 0.0968685 Jy ! Component: 200 - total flux cleaned = 0.108796 Jy ! Total flux subtracted in 200 components = 0.108796 Jy ! Clean residual min=-0.013758 max=0.020103 Jy/beam ! Clean residual mean=-0.000007 rms=0.004135 Jy/beam ! Combined flux in latest and established models = 0.343154 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 60 components and 0.343154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098641Jy sigma=0.001081 ! Fit after self-cal, rms=0.098543Jy sigma=0.001080 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.88 KP 1.00* LA 0.95 ! MK 1.06 NL 1.07 OV 0.98 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 KP 1.00* LA 0.92 ! MK 1.04 NL 1.13 OV 1.02 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.25 KP 1.00* LA 0.75 ! MK 1.07 NL 1.11 OV 0.95 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.09 KP 1.00* LA 0.82 ! MK 1.03 NL 1.23 OV 1.05 PT 0.95 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.098543Jy sigma=0.001080 ! Fit after self-cal, rms=0.088137Jy sigma=0.000969 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=6.909 mas, bpa=1.228 degrees ! Estimated noise=568.703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147027 Jy ! Component: 100 - total flux cleaned = 0.0216406 Jy ! Component: 150 - total flux cleaned = 0.0238784 Jy ! Component: 200 - total flux cleaned = 0.025687 Jy ! Total flux subtracted in 200 components = 0.025687 Jy ! Clean residual min=-0.008638 max=0.009210 Jy/beam ! Clean residual mean=-0.000000 rms=0.002194 Jy/beam ! Combined flux in latest and established models = 0.368841 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 92 components and 0.368841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085902Jy sigma=0.000934 ! Fit after self-cal, rms=0.085527Jy sigma=0.000930 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085527Jy sigma=0.000930 ! Fit after self-cal, rms=0.083424Jy sigma=0.000902 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=6.934 mas, bpa=1.076 degrees ! Estimated noise=570.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525587 Jy ! Component: 100 - total flux cleaned = 0.00859772 Jy ! Component: 150 - total flux cleaned = 0.0104786 Jy ! Component: 200 - total flux cleaned = 0.0115806 Jy ! Total flux subtracted in 200 components = 0.0115806 Jy ! Clean residual min=-0.004174 max=0.006271 Jy/beam ! Clean residual mean=0.000002 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.380422 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 110 components and 0.380422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083034Jy sigma=0.000897 ! Fit after self-cal, rms=0.082973Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434086 Jy ! Component: 100 - total flux cleaned = 0.00579589 Jy ! Component: 150 - total flux cleaned = 0.00669844 Jy ! Component: 200 - total flux cleaned = 0.00726932 Jy ! Total flux subtracted in 200 components = 0.00726932 Jy ! Clean residual min=-0.003530 max=0.004374 Jy/beam ! Clean residual mean=0.000002 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.387691 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 127 components and 0.387691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082615Jy sigma=0.000892 ! Fit after self-cal, rms=0.082604Jy sigma=0.000891 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082604Jy sigma=0.000891 ! Fit after self-cal, rms=0.082340Jy sigma=0.000891 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=6.927 mas, bpa=1.019 degrees ! Estimated noise=569.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229683 Jy ! Component: 100 - total flux cleaned = 0.00316092 Jy ! Component: 150 - total flux cleaned = 0.00397213 Jy ! Component: 200 - total flux cleaned = 0.00463137 Jy ! Total flux subtracted in 200 components = 0.00463137 Jy ! Clean residual min=-0.003165 max=0.003727 Jy/beam ! Clean residual mean=-0.000002 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.392322 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 0.392322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082244Jy sigma=0.000889 ! Fit after self-cal, rms=0.082234Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107117 Jy ! Component: 100 - total flux cleaned = 0.00156364 Jy ! Component: 150 - total flux cleaned = 0.00192146 Jy ! Component: 200 - total flux cleaned = 0.00233229 Jy ! Total flux subtracted in 200 components = 0.00233229 Jy ! Clean residual min=-0.003070 max=0.003673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.394655 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 150 components and 0.394655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082189Jy sigma=0.000888 ! Fit after self-cal, rms=0.082180Jy sigma=0.000888 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082180Jy sigma=0.000888 ! Fit after self-cal, rms=0.082155Jy sigma=0.000888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.797 mas, bmaj=12.23 mas, bpa=12.66 degrees ! Estimated noise=677.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244734 Jy ! Component: 100 - total flux cleaned = 0.00397999 Jy ! Component: 150 - total flux cleaned = 0.00506487 Jy ! Component: 200 - total flux cleaned = 0.00556622 Jy ! Total flux subtracted in 200 components = 0.00556622 Jy ! Clean residual min=-0.003795 max=0.004856 Jy/beam ! Clean residual mean=-0.000006 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.400221 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 166 components and 0.400221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082163Jy sigma=0.000888 ! Fit after self-cal, rms=0.082153Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998672 Jy ! Component: 100 - total flux cleaned = 0.0014426 Jy ! Component: 150 - total flux cleaned = 0.00160429 Jy ! Component: 200 - total flux cleaned = 0.00175263 Jy ! Total flux subtracted in 200 components = 0.00175263 Jy ! Clean residual min=-0.003654 max=0.004781 Jy/beam ! Clean residual mean=-0.000006 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.401974 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 182 components and 0.401973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082160Jy sigma=0.000888 ! Fit after self-cal, rms=0.082151Jy sigma=0.000888 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=6.92 mas, bpa=0.9541 degrees ! Estimated noise=569.175 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 6.92 at 0.9541 degrees (North through East) ! Clean map min=-0.0030148 max=0.23411 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=6.07 mas, bpa=0.6452 degrees ! Estimated noise=907.882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178348 Jy ! Component: 100 - total flux cleaned = 0.239172 Jy ! Component: 150 - total flux cleaned = 0.271908 Jy ! Component: 200 - total flux cleaned = 0.291883 Jy ! Total flux subtracted in 200 components = 0.291883 Jy ! Clean residual min=-0.007853 max=0.014809 Jy/beam ! Clean residual mean=-0.000005 rms=0.002433 Jy/beam ! Combined flux in latest and established models = 0.291883 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.291883 Jy ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=6.92 mas, bpa=0.9541 degrees ! Estimated noise=569.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230633 Jy ! Component: 100 - total flux cleaned = 0.0379903 Jy ! Component: 150 - total flux cleaned = 0.049037 Jy ! Component: 200 - total flux cleaned = 0.0577285 Jy ! Total flux subtracted in 200 components = 0.0577285 Jy ! Clean residual min=-0.006100 max=0.007719 Jy/beam ! Clean residual mean=-0.000006 rms=0.001911 Jy/beam ! Combined flux in latest and established models = 0.349612 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 97 components and 0.349612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.797 mas, bmaj=12.23 mas, bpa=12.66 degrees ! Estimated noise=677.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126277 Jy ! Component: 100 - total flux cleaned = 0.0217666 Jy ! Component: 150 - total flux cleaned = 0.0286959 Jy ! Component: 200 - total flux cleaned = 0.0340293 Jy ! Total flux subtracted in 200 components = 0.0340293 Jy ! Clean residual min=-0.005794 max=0.006237 Jy/beam ! Clean residual mean=-0.000009 rms=0.001804 Jy/beam ! Combined flux in latest and established models = 0.383641 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418331 Jy ! Component: 100 - total flux cleaned = 0.00756187 Jy ! Component: 150 - total flux cleaned = 0.0103365 Jy ! Component: 200 - total flux cleaned = 0.011843 Jy ! Total flux subtracted in 200 components = 0.011843 Jy ! Clean residual min=-0.004416 max=0.004953 Jy/beam ! Clean residual mean=-0.000008 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.395484 Jy ! Adding 113 model components to the UV plane model. ! The established model now contains 199 components and 0.395484 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=6.92 mas, bpa=0.9541 degrees ! Estimated noise=569.175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505707 Jy ! Component: 100 - total flux cleaned = 0.00143132 Jy ! Component: 150 - total flux cleaned = 0.00213826 Jy ! Component: 200 - total flux cleaned = 0.00270511 Jy ! Total flux subtracted in 200 components = 0.00270511 Jy ! Clean residual min=-0.003310 max=0.003829 Jy/beam ! Clean residual mean=-0.000003 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.398189 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 226 components and 0.398189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082149Jy sigma=0.000889 ! Fit after self-cal, rms=0.082145Jy sigma=0.000888 wmodel J0909-0231_S_2014_01_04_pus_map.mod ! Writing 226 model components to file: J0909-0231_S_2014_01_04_pus_map.mod wobs J0909-0231_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0909-0231_S_2014_01_04_pus_uvs.fits wwins J0909-0231_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0909-0231_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.001378 Jy ! Component: 100 - total flux cleaned = 0.0016663 Jy ! Component: 150 - total flux cleaned = 0.00171777 Jy ! Component: 200 - total flux cleaned = 0.00166977 Jy ! Component: 250 - total flux cleaned = 0.00175996 Jy ! Component: 300 - total flux cleaned = 0.00197396 Jy ! Component: 350 - total flux cleaned = 0.0021357 Jy ! Component: 400 - total flux cleaned = 0.00236909 Jy ! Component: 450 - total flux cleaned = 0.00255611 Jy ! Component: 500 - total flux cleaned = 0.00277304 Jy ! Component: 550 - total flux cleaned = 0.00305154 Jy ! Component: 600 - total flux cleaned = 0.00328652 Jy ! Component: 650 - total flux cleaned = 0.00361064 Jy ! Component: 700 - total flux cleaned = 0.0038306 Jy ! Component: 750 - total flux cleaned = 0.00404431 Jy ! Component: 800 - total flux cleaned = 0.00428102 Jy ! Component: 850 - total flux cleaned = 0.00445343 Jy ! Component: 900 - total flux cleaned = 0.00464966 Jy ! Component: 950 - total flux cleaned = 0.00484125 Jy ! Component: 1000 - total flux cleaned = 0.00500171 Jy ! Component: 1050 - total flux cleaned = 0.00521058 Jy ! Component: 1100 - total flux cleaned = 0.00541502 Jy ! Component: 1150 - total flux cleaned = 0.0054898 Jy ! Component: 1200 - total flux cleaned = 0.00561244 Jy ! Component: 1250 - total flux cleaned = 0.0057323 Jy ! Component: 1300 - total flux cleaned = 0.00580291 Jy ! Component: 1350 - total flux cleaned = 0.00594143 Jy ! Component: 1400 - total flux cleaned = 0.00605466 Jy ! Component: 1450 - total flux cleaned = 0.00614401 Jy ! Component: 1500 - total flux cleaned = 0.00629693 Jy ! Component: 1550 - total flux cleaned = 0.00642581 Jy ! Component: 1600 - total flux cleaned = 0.00648935 Jy ! Component: 1650 - total flux cleaned = 0.00659362 Jy ! Component: 1700 - total flux cleaned = 0.00665551 Jy ! Component: 1750 - total flux cleaned = 0.00677665 Jy ! Component: 1800 - total flux cleaned = 0.00685587 Jy ! Component: 1850 - total flux cleaned = 0.00693422 Jy ! Component: 1900 - total flux cleaned = 0.00701155 Jy ! Component: 1950 - total flux cleaned = 0.00712581 Jy ! Component: 2000 - total flux cleaned = 0.00723831 Jy ! Component: 2050 - total flux cleaned = 0.00734926 Jy ! Component: 2100 - total flux cleaned = 0.00745877 Jy ! Component: 2150 - total flux cleaned = 0.00756689 Jy ! Component: 2200 - total flux cleaned = 0.00769135 Jy ! Component: 2250 - total flux cleaned = 0.00777911 Jy ! Component: 2300 - total flux cleaned = 0.00788348 Jy ! Component: 2350 - total flux cleaned = 0.00802057 Jy ! Component: 2400 - total flux cleaned = 0.00808834 Jy ! Component: 2450 - total flux cleaned = 0.00822219 Jy ! Component: 2500 - total flux cleaned = 0.00835436 Jy ! Component: 2550 - total flux cleaned = 0.00840334 Jy ! Component: 2600 - total flux cleaned = 0.00848445 Jy ! Component: 2650 - total flux cleaned = 0.00858069 Jy ! Component: 2700 - total flux cleaned = 0.00861257 Jy ! Component: 2750 - total flux cleaned = 0.00878542 Jy ! Component: 2800 - total flux cleaned = 0.00880061 Jy ! Component: 2850 - total flux cleaned = 0.00884696 Jy ! Component: 2900 - total flux cleaned = 0.00889276 Jy ! Component: 2950 - total flux cleaned = 0.0089834 Jy ! Component: 3000 - total flux cleaned = 0.00904326 Jy ! Component: 3050 - total flux cleaned = 0.00910272 Jy ! Component: 3100 - total flux cleaned = 0.00913214 Jy ! Component: 3150 - total flux cleaned = 0.00916138 Jy ! Component: 3200 - total flux cleaned = 0.00919018 Jy ! Component: 3250 - total flux cleaned = 0.00921883 Jy ! Component: 3300 - total flux cleaned = 0.00924727 Jy ! Component: 3350 - total flux cleaned = 0.00930369 Jy ! Component: 3400 - total flux cleaned = 0.00933162 Jy ! Component: 3450 - total flux cleaned = 0.00935934 Jy ! Component: 3500 - total flux cleaned = 0.00942842 Jy ! Component: 3550 - total flux cleaned = 0.00946954 Jy ! Component: 3600 - total flux cleaned = 0.00953762 Jy ! Component: 3650 - total flux cleaned = 0.00956458 Jy ! Component: 3700 - total flux cleaned = 0.00957821 Jy ! Component: 3750 - total flux cleaned = 0.00965842 Jy ! Component: 3800 - total flux cleaned = 0.00972469 Jy ! Component: 3850 - total flux cleaned = 0.00971133 Jy ! Component: 3900 - total flux cleaned = 0.00976373 Jy ! Component: 3950 - total flux cleaned = 0.00978983 Jy ! Component: 4000 - total flux cleaned = 0.00978983 Jy ! Component: 4050 - total flux cleaned = 0.00986735 Jy ! Total flux subtracted in 4096 components = 0.0098546 Jy ! Clean residual min=-0.000703 max=0.000825 Jy/beam ! Clean residual mean=-0.000002 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.408044 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 502 components and 0.408044 Jy ![Exited script file: muppet] wmap "J0909-0231_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 6.92 at 0.9541 degrees (North through East) ! Clean map min=-0.0019453 max=0.24084 Jy/beam ! Writing clean map to FITS file: J0909-0231_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.24084 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.256857 0.256857 0.513713 1.02743 2.05485 4.1097 8.21941 16.4388 32.8776 65.7553 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 6.92 at 0.9541 degrees (North through East) ! Clean map min=-0.0019453 max=0.24084 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0909-0231_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:22:15 2017