! Started logfile: J0908+1609_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:00:48 2016 obs J0908+1609_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0908+1609_S_2014_08_09_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.448238 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0908+1609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 6616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0908+1609_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009652Jy sigma=0.006878 ! Fit after self-cal, rms=0.915333Jy sigma=0.006255 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.368 mas, bmaj=9.368 mas, bpa=-24.73 degrees ! Estimated noise=2344.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0727395 Jy ! Component: 100 - total flux cleaned = 0.0899166 Jy ! Total flux subtracted in 100 components = 0.0899166 Jy ! Clean residual min=-0.008004 max=0.008621 Jy/beam ! Clean residual mean=-0.000020 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 0.0899166 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0899166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125701Jy sigma=0.000803 ! Fit after self-cal, rms=0.124725Jy sigma=0.000798 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.558 mas, bmaj=9.94 mas, bpa=-12.03 degrees ! Estimated noise=1394.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047306 Jy ! Component: 100 - total flux cleaned = 0.00562951 Jy ! Component: 150 - total flux cleaned = 0.00632421 Jy ! Component: 200 - total flux cleaned = 0.00697879 Jy ! Total flux subtracted in 200 components = 0.00697879 Jy ! Clean residual min=-0.005573 max=0.005594 Jy/beam ! Clean residual mean=-0.000016 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.0968954 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 40 components and 0.0968954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124229Jy sigma=0.000795 ! Fit after self-cal, rms=0.124056Jy sigma=0.000794 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 1.00* KP 1.08 ! LA 0.96 MK 1.00* NL 0.73 OV 1.06 ! PT 1.08 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.14 KP 1.13 ! LA 0.97 MK 1.00* NL 0.89 OV 1.11 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.10 HN 1.03 KP 1.00 ! LA 0.85 MK 1.00* NL 0.92 OV 1.03 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.00* KP 0.92 ! LA 0.76 MK 1.00* NL 0.87 OV 1.13 ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.124056Jy sigma=0.000794 ! Fit after self-cal, rms=0.117974Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.571 mas, bmaj=10.02 mas, bpa=-11.17 degrees ! Estimated noise=1374.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013797 Jy ! Component: 100 - total flux cleaned = 0.00165955 Jy ! Component: 150 - total flux cleaned = 0.00190182 Jy ! Component: 200 - total flux cleaned = 0.00197254 Jy ! Total flux subtracted in 200 components = 0.00197254 Jy ! Clean residual min=-0.003414 max=0.004027 Jy/beam ! Clean residual mean=0.000006 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.098868 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.098868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117951Jy sigma=0.000790 ! Fit after self-cal, rms=0.117838Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117838Jy sigma=0.000788 ! Fit after self-cal, rms=0.119051Jy sigma=0.000787 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.571 mas, bmaj=10.03 mas, bpa=-10.79 degrees ! Estimated noise=1376.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887467 Jy ! Component: 100 - total flux cleaned = 0.00109206 Jy ! Component: 150 - total flux cleaned = 0.00118932 Jy ! Component: 200 - total flux cleaned = 0.0012539 Jy ! Total flux subtracted in 200 components = 0.0012539 Jy ! Clean residual min=-0.003478 max=0.003454 Jy/beam ! Clean residual mean=0.000012 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.100122 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.100122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119043Jy sigma=0.000787 ! Fit after self-cal, rms=0.119166Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257159 Jy ! Component: 100 - total flux cleaned = 0.000344946 Jy ! Component: 150 - total flux cleaned = 0.000344652 Jy ! Component: 200 - total flux cleaned = 0.000343906 Jy ! Total flux subtracted in 200 components = 0.000343906 Jy ! Clean residual min=-0.003454 max=0.003395 Jy/beam ! Clean residual mean=0.000008 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.100466 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.100466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119161Jy sigma=0.000787 ! Fit after self-cal, rms=0.119160Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119160Jy sigma=0.000787 ! Fit after self-cal, rms=0.119767Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.592 mas, bmaj=9.996 mas, bpa=-10.52 degrees ! Estimated noise=1378.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695662 Jy ! Component: 100 - total flux cleaned = 0.00104979 Jy ! Component: 150 - total flux cleaned = 0.0011034 Jy ! Component: 200 - total flux cleaned = 0.00113781 Jy ! Total flux subtracted in 200 components = 0.00113781 Jy ! Clean residual min=-0.003383 max=0.003354 Jy/beam ! Clean residual mean=0.000010 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.101604 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.101604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119763Jy sigma=0.000786 ! Fit after self-cal, rms=0.119799Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.50408e-05 Jy ! Component: 100 - total flux cleaned = 9.82684e-05 Jy ! Component: 150 - total flux cleaned = 0.000108753 Jy ! Component: 200 - total flux cleaned = 0.00010881 Jy ! Total flux subtracted in 200 components = 0.00010881 Jy ! Clean residual min=-0.003413 max=0.003276 Jy/beam ! Clean residual mean=0.000010 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.101712 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.101712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119797Jy sigma=0.000786 ! Fit after self-cal, rms=0.119795Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119795Jy sigma=0.000786 ! Fit after self-cal, rms=0.119983Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.35 mas, bmaj=10.9 mas, bpa=-11.31 degrees ! Estimated noise=1436.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818175 Jy ! Component: 100 - total flux cleaned = 0.0013101 Jy ! Component: 150 - total flux cleaned = 0.0014211 Jy ! Component: 200 - total flux cleaned = 0.0014804 Jy ! Total flux subtracted in 200 components = 0.0014804 Jy ! Clean residual min=-0.003021 max=0.002835 Jy/beam ! Clean residual mean=0.000011 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.103193 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 88 components and 0.103193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119981Jy sigma=0.000786 ! Fit after self-cal, rms=0.119988Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253562 Jy ! Component: 100 - total flux cleaned = 0.000327485 Jy ! Component: 150 - total flux cleaned = 0.000381853 Jy ! Component: 200 - total flux cleaned = 0.000411256 Jy ! Total flux subtracted in 200 components = 0.000411256 Jy ! Clean residual min=-0.003027 max=0.002851 Jy/beam ! Clean residual mean=0.000011 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.103604 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 92 components and 0.103604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119989Jy sigma=0.000786 ! Fit after self-cal, rms=0.119988Jy sigma=0.000786 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.601 mas, bmaj=9.967 mas, bpa=-10.31 degrees ! Estimated noise=1378.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.601 x 9.967 at -10.31 degrees (North through East) ! Clean map min=-0.003291 max=0.092236 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.473 mas, bmaj=9.425 mas, bpa=-23.59 degrees ! Estimated noise=2318.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0720056 Jy ! Component: 100 - total flux cleaned = 0.0897687 Jy ! Component: 150 - total flux cleaned = 0.0968686 Jy ! Component: 200 - total flux cleaned = 0.0991016 Jy ! Total flux subtracted in 200 components = 0.0991016 Jy ! Clean residual min=-0.006313 max=0.005574 Jy/beam ! Clean residual mean=0.000013 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.0991016 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0991016 Jy ! Inverting map and beam ! Estimated beam: bmin=8.601 mas, bmaj=9.967 mas, bpa=-10.31 degrees ! Estimated noise=1378.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028901 Jy ! Component: 100 - total flux cleaned = 0.00304653 Jy ! Component: 150 - total flux cleaned = 0.0033335 Jy ! Component: 200 - total flux cleaned = 0.00343035 Jy ! Total flux subtracted in 200 components = 0.00343035 Jy ! Clean residual min=-0.003705 max=0.003409 Jy/beam ! Clean residual mean=0.000010 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.102532 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.102532 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.35 mas, bmaj=10.9 mas, bpa=-11.31 degrees ! Estimated noise=1436.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000343478 Jy ! Component: 100 - total flux cleaned = 0.000398977 Jy ! Component: 150 - total flux cleaned = 0.00042044 Jy ! Component: 200 - total flux cleaned = 0.000441883 Jy ! Total flux subtracted in 200 components = 0.000441883 Jy ! Clean residual min=-0.003265 max=0.002931 Jy/beam ! Clean residual mean=0.000011 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.102974 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.92954e-05 Jy ! Component: 100 - total flux cleaned = 7.56723e-05 Jy ! Component: 150 - total flux cleaned = 0.000110266 Jy ! Component: 200 - total flux cleaned = 0.000142197 Jy ! Total flux subtracted in 200 components = 0.000142197 Jy ! Clean residual min=-0.003176 max=0.002920 Jy/beam ! Clean residual mean=0.000011 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.103116 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 0.103116 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.601 mas, bmaj=9.967 mas, bpa=-10.31 degrees ! Estimated noise=1378.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151313 Jy ! Component: 100 - total flux cleaned = -0.000203489 Jy ! Component: 150 - total flux cleaned = -0.000274224 Jy ! Component: 200 - total flux cleaned = -0.000318003 Jy ! Total flux subtracted in 200 components = -0.000318003 Jy ! Clean residual min=-0.003302 max=0.003279 Jy/beam ! Clean residual mean=0.000010 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.102798 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.102798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119998Jy sigma=0.000786 ! Fit after self-cal, rms=0.119986Jy sigma=0.000786 wmodel J0908+1609_S_2014_08_09_pus_map.mod ! Writing 91 model components to file: J0908+1609_S_2014_08_09_pus_map.mod wobs J0908+1609_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0908+1609_S_2014_08_09_pus_uvs.fits wwins J0908+1609_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J0908+1609_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.6192e-05 Jy ! Component: 100 - total flux cleaned = 0.000141426 Jy ! Component: 150 - total flux cleaned = 0.000142283 Jy ! Component: 200 - total flux cleaned = 5.11487e-05 Jy ! Component: 250 - total flux cleaned = 6.82398e-06 Jy ! Component: 300 - total flux cleaned = -0.000200417 Jy ! Component: 350 - total flux cleaned = -0.00020213 Jy ! Component: 400 - total flux cleaned = -0.000203409 Jy ! Component: 450 - total flux cleaned = -0.000167232 Jy ! Component: 500 - total flux cleaned = -2.72928e-05 Jy ! Component: 550 - total flux cleaned = 3.96266e-05 Jy ! Component: 600 - total flux cleaned = 4.00556e-05 Jy ! Component: 650 - total flux cleaned = 3.97591e-05 Jy ! Component: 700 - total flux cleaned = 7.0765e-05 Jy ! Component: 750 - total flux cleaned = -1.9056e-05 Jy ! Component: 800 - total flux cleaned = 3.95988e-05 Jy ! Component: 850 - total flux cleaned = -1.7688e-05 Jy ! Component: 900 - total flux cleaned = 9.72818e-06 Jy ! Component: 950 - total flux cleaned = -7.20885e-05 Jy ! Component: 1000 - total flux cleaned = -7.16828e-05 Jy ! Component: 1050 - total flux cleaned = -7.22104e-05 Jy ! Component: 1100 - total flux cleaned = -0.000122547 Jy ! Component: 1150 - total flux cleaned = -0.000122347 Jy ! Component: 1200 - total flux cleaned = -0.000122262 Jy ! Component: 1250 - total flux cleaned = -0.00012185 Jy ! Component: 1300 - total flux cleaned = -5.26969e-05 Jy ! Component: 1350 - total flux cleaned = -5.2936e-05 Jy ! Component: 1400 - total flux cleaned = -5.28997e-05 Jy ! Component: 1450 - total flux cleaned = -3.07658e-05 Jy ! Component: 1500 - total flux cleaned = -3.03223e-05 Jy ! Component: 1550 - total flux cleaned = -9.40771e-06 Jy ! Component: 1600 - total flux cleaned = 1.13567e-05 Jy ! Component: 1650 - total flux cleaned = -8.57688e-06 Jy ! Component: 1700 - total flux cleaned = -2.83372e-05 Jy ! Component: 1750 - total flux cleaned = -2.80678e-05 Jy ! Component: 1800 - total flux cleaned = -4.70465e-05 Jy ! Component: 1850 - total flux cleaned = -0.000121858 Jy ! Component: 1900 - total flux cleaned = -8.46815e-05 Jy ! Component: 1950 - total flux cleaned = -3.04008e-05 Jy ! Component: 2000 - total flux cleaned = -4.87327e-05 Jy ! Component: 2050 - total flux cleaned = -1.32502e-05 Jy ! Component: 2100 - total flux cleaned = 4.54378e-06 Jy ! Component: 2150 - total flux cleaned = 3.91038e-05 Jy ! Component: 2200 - total flux cleaned = 0.00010691 Jy ! Component: 2250 - total flux cleaned = 9.00113e-05 Jy ! Component: 2300 - total flux cleaned = 5.68199e-05 Jy ! Component: 2350 - total flux cleaned = 0.000106308 Jy ! Component: 2400 - total flux cleaned = 8.99406e-05 Jy ! Component: 2450 - total flux cleaned = 0.000137988 Jy ! Component: 2500 - total flux cleaned = 0.000105958 Jy ! Component: 2550 - total flux cleaned = 0.000121657 Jy ! Component: 2600 - total flux cleaned = 0.000121759 Jy ! Component: 2650 - total flux cleaned = 0.000121675 Jy ! Component: 2700 - total flux cleaned = 0.000121508 Jy ! Component: 2750 - total flux cleaned = 7.6119e-05 Jy ! Component: 2800 - total flux cleaned = 0.000136071 Jy ! Component: 2850 - total flux cleaned = 0.000120951 Jy ! Component: 2900 - total flux cleaned = 0.000106069 Jy ! Component: 2950 - total flux cleaned = 0.000105919 Jy ! Component: 3000 - total flux cleaned = 0.000105725 Jy ! Component: 3050 - total flux cleaned = 4.81329e-05 Jy ! Component: 3100 - total flux cleaned = 4.82089e-05 Jy ! Component: 3150 - total flux cleaned = 4.8334e-05 Jy ! Component: 3200 - total flux cleaned = 3.43111e-05 Jy ! Component: 3250 - total flux cleaned = 6.41765e-06 Jy ! Component: 3300 - total flux cleaned = -2.13146e-05 Jy ! Component: 3350 - total flux cleaned = -4.89275e-05 Jy ! Component: 3400 - total flux cleaned = -0.000103619 Jy ! Component: 3450 - total flux cleaned = -0.000144369 Jy ! Component: 3500 - total flux cleaned = -0.000198322 Jy ! Component: 3550 - total flux cleaned = -0.000251909 Jy ! Component: 3600 - total flux cleaned = -0.000265329 Jy ! Component: 3650 - total flux cleaned = -0.000265382 Jy ! Component: 3700 - total flux cleaned = -0.000304961 Jy ! Component: 3750 - total flux cleaned = -0.000265815 Jy ! Component: 3800 - total flux cleaned = -0.000343915 Jy ! Component: 3850 - total flux cleaned = -0.000330988 Jy ! Component: 3900 - total flux cleaned = -0.000356697 Jy ! Component: 3950 - total flux cleaned = -0.000343993 Jy ! Component: 4000 - total flux cleaned = -0.000369462 Jy ! Component: 4050 - total flux cleaned = -0.000318903 Jy ! Total flux subtracted in 4096 components = -0.000331564 Jy ! Clean residual min=-0.000783 max=0.000665 Jy/beam ! Clean residual mean=0.000002 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.102466 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 401 components and 0.102466 Jy ![Exited script file: muppet] wmap "J0908+1609_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.601 x 9.967 at -10.31 degrees (North through East) ! Clean map min=-0.0023079 max=0.092181 Jy/beam ! Writing clean map to FITS file: J0908+1609_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0921808 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000233521 device "J0908+1609_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0908+1609_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.759988 0.759988 1.51998 3.03995 6.07991 12.1598 24.3196 48.6393 97.2785 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.601 x 9.967 at -10.31 degrees (North through East) ! Clean map min=-0.0023079 max=0.092181 Jy/beam quit ! Quitting program ! Log file J0908+1609_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:00:54 2016