! Started logfile: J0902+4310_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:21:02 2016 obs J0902+4310_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0902+4310_S_2014_05_31_pus_uva.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.535524 visibilities/baseline/integration-bin. ! Found source: J0902+4310 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 6844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0902+4310_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.779298Jy sigma=0.009343 ! Fit after self-cal, rms=0.758574Jy sigma=0.009126 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=6.322 mas, bpa=42.96 degrees ! Estimated noise=1015.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18708 Jy ! Component: 100 - total flux cleaned = 0.231096 Jy ! Total flux subtracted in 100 components = 0.231096 Jy ! Clean residual min=-0.011911 max=0.017973 Jy/beam ! Clean residual mean=-0.000048 rms=0.003419 Jy/beam ! Combined flux in latest and established models = 0.231096 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.231096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084991Jy sigma=0.000958 ! Fit after self-cal, rms=0.084948Jy sigma=0.000958 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.954 mas, bmaj=6.796 mas, bpa=42.86 degrees ! Estimated noise=723.336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023217 Jy ! Component: 100 - total flux cleaned = 0.0378488 Jy ! Component: 150 - total flux cleaned = 0.0482301 Jy ! Component: 200 - total flux cleaned = 0.0562108 Jy ! Total flux subtracted in 200 components = 0.0562108 Jy ! Clean residual min=-0.006430 max=0.008934 Jy/beam ! Clean residual mean=-0.000027 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 0.287307 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 52 components and 0.287307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076893Jy sigma=0.000865 ! Fit after self-cal, rms=0.076488Jy sigma=0.000860 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.86 HN 0.96 KP 1.03 ! LA 1.16 MK 1.00* NL 0.96 OV 0.99 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.99 KP 0.98 ! LA 1.12 MK 1.00* NL 1.04 OV 1.04 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.15 HN 1.00 KP 0.88 ! LA 0.87 MK 1.00* NL 1.05 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.97 KP 0.85 ! LA 0.83 MK 1.00* NL 1.06 OV 0.99 ! PT 0.97 SC 0.95 ! ! ! Fit before self-cal, rms=0.076488Jy sigma=0.000860 ! Fit after self-cal, rms=0.067800Jy sigma=0.000787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.972 mas, bmaj=6.781 mas, bpa=42.87 degrees ! Estimated noise=707.872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762941 Jy ! Component: 100 - total flux cleaned = 0.0124007 Jy ! Component: 150 - total flux cleaned = 0.0145277 Jy ! Component: 200 - total flux cleaned = 0.0156171 Jy ! Total flux subtracted in 200 components = 0.0156171 Jy ! Clean residual min=-0.003448 max=0.004229 Jy/beam ! Clean residual mean=0.000003 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.302924 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 102 components and 0.302924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066870Jy sigma=0.000774 ! Fit after self-cal, rms=0.066783Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066783Jy sigma=0.000773 ! Fit after self-cal, rms=0.066364Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.993 mas, bmaj=6.754 mas, bpa=42.9 degrees ! Estimated noise=707.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305047 Jy ! Component: 100 - total flux cleaned = 0.00462292 Jy ! Component: 150 - total flux cleaned = 0.00491411 Jy ! Component: 200 - total flux cleaned = 0.00501093 Jy ! Total flux subtracted in 200 components = 0.00501093 Jy ! Clean residual min=-0.002614 max=0.003126 Jy/beam ! Clean residual mean=-0.000004 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.307935 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 116 components and 0.307935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066195Jy sigma=0.000766 ! Fit after self-cal, rms=0.066184Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201846 Jy ! Component: 100 - total flux cleaned = 0.00272662 Jy ! Component: 150 - total flux cleaned = 0.00297765 Jy ! Component: 200 - total flux cleaned = 0.00302524 Jy ! Total flux subtracted in 200 components = 0.00302524 Jy ! Clean residual min=-0.002222 max=0.002672 Jy/beam ! Clean residual mean=-0.000000 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.31096 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 139 components and 0.31096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066041Jy sigma=0.000764 ! Fit after self-cal, rms=0.066037Jy sigma=0.000764 ! Inverting map ! Added new window around map position (-44.5, 52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023216 Jy ! Component: 100 - total flux cleaned = 0.003452 Jy ! Component: 150 - total flux cleaned = 0.00398273 Jy ! Component: 200 - total flux cleaned = 0.00430457 Jy ! Total flux subtracted in 200 components = 0.00430457 Jy ! Clean residual min=-0.002150 max=0.002260 Jy/beam ! Clean residual mean=0.000002 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.315265 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 159 components and 0.315264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065933Jy sigma=0.000763 ! Fit after self-cal, rms=0.065930Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065930Jy sigma=0.000763 ! Fit after self-cal, rms=0.065861Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.993 mas, bmaj=6.756 mas, bpa=42.87 degrees ! Estimated noise=706.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118118 Jy ! Component: 100 - total flux cleaned = 0.00166664 Jy ! Component: 150 - total flux cleaned = 0.0019602 Jy ! Component: 200 - total flux cleaned = 0.00206221 Jy ! Total flux subtracted in 200 components = 0.00206221 Jy ! Clean residual min=-0.001859 max=0.002123 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.317327 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 177 components and 0.317327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065815Jy sigma=0.000762 ! Fit after self-cal, rms=0.065815Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108118 Jy ! Component: 100 - total flux cleaned = 0.00160875 Jy ! Component: 150 - total flux cleaned = 0.00210641 Jy ! Component: 200 - total flux cleaned = 0.00228174 Jy ! Total flux subtracted in 200 components = 0.00228174 Jy ! Clean residual min=-0.001636 max=0.001584 Jy/beam ! Clean residual mean=0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.319608 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 208 components and 0.319608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065751Jy sigma=0.000761 ! Fit after self-cal, rms=0.065748Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065748Jy sigma=0.000761 ! Fit after self-cal, rms=0.065650Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.641 mas, bmaj=10.44 mas, bpa=-62.12 degrees ! Estimated noise=781.464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034017 Jy ! Component: 100 - total flux cleaned = 0.000429202 Jy ! Component: 150 - total flux cleaned = 0.000509746 Jy ! Component: 200 - total flux cleaned = 0.000583665 Jy ! Total flux subtracted in 200 components = 0.000583665 Jy ! Clean residual min=-0.001610 max=0.001384 Jy/beam ! Clean residual mean=0.000002 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.320192 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 229 components and 0.320192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065636Jy sigma=0.000761 ! Fit after self-cal, rms=0.065635Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.66341e-05 Jy ! Component: 100 - total flux cleaned = 0.000136915 Jy ! Component: 150 - total flux cleaned = 0.000221775 Jy ! Component: 200 - total flux cleaned = 0.000261506 Jy ! Total flux subtracted in 200 components = 0.000261506 Jy ! Clean residual min=-0.001513 max=0.001310 Jy/beam ! Clean residual mean=0.000003 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.320453 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 250 components and 0.320453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065627Jy sigma=0.000761 ! Fit after self-cal, rms=0.065627Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.995 mas, bmaj=6.755 mas, bpa=42.83 degrees ! Estimated noise=706.122 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.995 x 6.755 at 42.83 degrees (North through East) ! Clean map min=-0.0017228 max=0.2391 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.783 mas, bmaj=6.239 mas, bpa=42.87 degrees ! Estimated noise=986.801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181586 Jy ! Component: 100 - total flux cleaned = 0.224065 Jy ! Component: 150 - total flux cleaned = 0.243965 Jy ! Component: 200 - total flux cleaned = 0.257847 Jy ! Total flux subtracted in 200 components = 0.257847 Jy ! Clean residual min=-0.006654 max=0.008584 Jy/beam ! Clean residual mean=-0.000033 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 0.257847 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.257847 Jy ! Inverting map and beam ! Estimated beam: bmin=4.995 mas, bmaj=6.755 mas, bpa=42.83 degrees ! Estimated noise=706.122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138351 Jy ! Component: 100 - total flux cleaned = 0.0236022 Jy ! Component: 150 - total flux cleaned = 0.030793 Jy ! Component: 200 - total flux cleaned = 0.0362409 Jy ! Total flux subtracted in 200 components = 0.0362409 Jy ! Clean residual min=-0.003599 max=0.003982 Jy/beam ! Clean residual mean=-0.000028 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.294088 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 88 components and 0.294088 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.641 mas, bmaj=10.44 mas, bpa=-62.12 degrees ! Estimated noise=781.464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593368 Jy ! Component: 100 - total flux cleaned = 0.0101299 Jy ! Component: 150 - total flux cleaned = 0.0135146 Jy ! Component: 200 - total flux cleaned = 0.0162956 Jy ! Total flux subtracted in 200 components = 0.0162956 Jy ! Clean residual min=-0.002743 max=0.002207 Jy/beam ! Clean residual mean=-0.000015 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.310384 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230261 Jy ! Component: 100 - total flux cleaned = 0.00423574 Jy ! Component: 150 - total flux cleaned = 0.00570781 Jy ! Component: 200 - total flux cleaned = 0.00687459 Jy ! Total flux subtracted in 200 components = 0.00687459 Jy ! Clean residual min=-0.002189 max=0.001752 Jy/beam ! Clean residual mean=-0.000003 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.317258 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 165 components and 0.317258 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.995 mas, bmaj=6.755 mas, bpa=42.83 degrees ! Estimated noise=706.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122624 Jy ! Component: 100 - total flux cleaned = 0.0016726 Jy ! Component: 150 - total flux cleaned = 0.00229865 Jy ! Component: 200 - total flux cleaned = 0.00271031 Jy ! Total flux subtracted in 200 components = 0.00271031 Jy ! Clean residual min=-0.001763 max=0.001817 Jy/beam ! Clean residual mean=0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.319969 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 194 components and 0.319969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065778Jy sigma=0.000762 ! Fit after self-cal, rms=0.065755Jy sigma=0.000762 wmodel J0902+4310_S_2014_05_31_pus_map.mod ! Writing 194 model components to file: J0902+4310_S_2014_05_31_pus_map.mod wobs J0902+4310_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0902+4310_S_2014_05_31_pus_uvs.fits wwins J0902+4310_S_2014_05_31_pus_map.win ! wwins: Wrote 5 windows to J0902+4310_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370489 Jy ! Component: 100 - total flux cleaned = 0.000494687 Jy ! Component: 150 - total flux cleaned = 0.00049499 Jy ! Component: 200 - total flux cleaned = 0.000576148 Jy ! Component: 250 - total flux cleaned = 0.000705455 Jy ! Component: 300 - total flux cleaned = 0.000905076 Jy ! Component: 350 - total flux cleaned = 0.00100168 Jy ! Component: 400 - total flux cleaned = 0.00119085 Jy ! Component: 450 - total flux cleaned = 0.00132841 Jy ! Component: 500 - total flux cleaned = 0.00146271 Jy ! Component: 550 - total flux cleaned = 0.00163736 Jy ! Component: 600 - total flux cleaned = 0.00178624 Jy ! Component: 650 - total flux cleaned = 0.00189035 Jy ! Component: 700 - total flux cleaned = 0.00201262 Jy ! Component: 750 - total flux cleaned = 0.00209229 Jy ! Component: 800 - total flux cleaned = 0.00220971 Jy ! Component: 850 - total flux cleaned = 0.00232437 Jy ! Component: 900 - total flux cleaned = 0.00239927 Jy ! Component: 950 - total flux cleaned = 0.00250911 Jy ! Component: 1000 - total flux cleaned = 0.00265256 Jy ! Component: 1050 - total flux cleaned = 0.0027758 Jy ! Component: 1100 - total flux cleaned = 0.00293046 Jy ! Component: 1150 - total flux cleaned = 0.00298097 Jy ! Component: 1200 - total flux cleaned = 0.00311469 Jy ! Component: 1250 - total flux cleaned = 0.00319657 Jy ! Component: 1300 - total flux cleaned = 0.00324516 Jy ! Component: 1350 - total flux cleaned = 0.00332504 Jy ! Component: 1400 - total flux cleaned = 0.00332542 Jy ! Component: 1450 - total flux cleaned = 0.0034805 Jy ! Component: 1500 - total flux cleaned = 0.00354147 Jy ! Component: 1550 - total flux cleaned = 0.00361677 Jy ! Component: 1600 - total flux cleaned = 0.00369104 Jy ! Component: 1650 - total flux cleaned = 0.00370575 Jy ! Component: 1700 - total flux cleaned = 0.00383599 Jy ! Component: 1750 - total flux cleaned = 0.00383623 Jy ! Component: 1800 - total flux cleaned = 0.00392083 Jy ! Component: 1850 - total flux cleaned = 0.00387961 Jy ! Component: 1900 - total flux cleaned = 0.00396195 Jy ! Component: 1950 - total flux cleaned = 0.00397551 Jy ! Component: 2000 - total flux cleaned = 0.00404266 Jy ! Component: 2050 - total flux cleaned = 0.00404249 Jy ! Component: 2100 - total flux cleaned = 0.00409472 Jy ! Component: 2150 - total flux cleaned = 0.00405587 Jy ! Component: 2200 - total flux cleaned = 0.00405577 Jy ! Component: 2250 - total flux cleaned = 0.00408115 Jy ! Component: 2300 - total flux cleaned = 0.004131 Jy ! Component: 2350 - total flux cleaned = 0.00415572 Jy ! Component: 2400 - total flux cleaned = 0.00416792 Jy ! Component: 2450 - total flux cleaned = 0.00414361 Jy ! Component: 2500 - total flux cleaned = 0.00419154 Jy ! Component: 2550 - total flux cleaned = 0.0042389 Jy ! Component: 2600 - total flux cleaned = 0.00425052 Jy ! Component: 2650 - total flux cleaned = 0.00425051 Jy ! Component: 2700 - total flux cleaned = 0.00425043 Jy ! Component: 2750 - total flux cleaned = 0.00430714 Jy ! Component: 2800 - total flux cleaned = 0.00426208 Jy ! Component: 2850 - total flux cleaned = 0.00431798 Jy ! Component: 2900 - total flux cleaned = 0.00431804 Jy ! Component: 2950 - total flux cleaned = 0.00434004 Jy ! Component: 3000 - total flux cleaned = 0.00436171 Jy ! Component: 3050 - total flux cleaned = 0.00438313 Jy ! Component: 3100 - total flux cleaned = 0.00440457 Jy ! Component: 3150 - total flux cleaned = 0.00443633 Jy ! Component: 3200 - total flux cleaned = 0.00445733 Jy ! Component: 3250 - total flux cleaned = 0.00449905 Jy ! Component: 3300 - total flux cleaned = 0.00450951 Jy ! Component: 3350 - total flux cleaned = 0.00452994 Jy ! Component: 3400 - total flux cleaned = 0.00454013 Jy ! Component: 3450 - total flux cleaned = 0.00455033 Jy ! Component: 3500 - total flux cleaned = 0.00458036 Jy ! Component: 3550 - total flux cleaned = 0.00460013 Jy ! Component: 3600 - total flux cleaned = 0.00460981 Jy ! Component: 3650 - total flux cleaned = 0.00460981 Jy ! Component: 3700 - total flux cleaned = 0.00461961 Jy ! Component: 3750 - total flux cleaned = 0.00465815 Jy ! Component: 3800 - total flux cleaned = 0.00467734 Jy ! Component: 3850 - total flux cleaned = 0.00467729 Jy ! Component: 3900 - total flux cleaned = 0.00467734 Jy ! Component: 3950 - total flux cleaned = 0.00470543 Jy ! Component: 4000 - total flux cleaned = 0.00473331 Jy ! Component: 4050 - total flux cleaned = 0.0047426 Jy ! Total flux subtracted in 4096 components = 0.00475181 Jy ! Clean residual min=-0.000651 max=0.000603 Jy/beam ! Clean residual mean=0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.32472 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 466 components and 0.32472 Jy ![Exited script file: muppet] wmap "J0902+4310_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.995 x 6.755 at 42.83 degrees (North through East) ! Clean map min=-0.0010011 max=0.23924 Jy/beam ! Writing clean map to FITS file: J0902+4310_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.23924 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169681 device "J0902+4310_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0902+4310_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.212775 0.212775 0.42555 0.851101 1.7022 3.4044 6.80881 13.6176 27.2352 54.4705 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.239 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.995 x 6.755 at 42.83 degrees (North through East) ! Clean map min=-0.0010011 max=0.23924 Jy/beam quit ! Quitting program ! Log file J0902+4310_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:21:08 2016