! Started logfile: J0858+1405_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:00:36 2016 obs J0858+1405_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0858+1405_S_2014_08_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.394674 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0858+1405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 8596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0858+1405_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 608 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 487 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 548 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 608 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987948Jy sigma=0.010191 ! Fit after self-cal, rms=0.922258Jy sigma=0.009539 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.284 mas, bmaj=10.13 mas, bpa=-15.75 degrees ! Estimated noise=1653.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0537127 Jy ! Component: 100 - total flux cleaned = 0.0713503 Jy ! Total flux subtracted in 100 components = 0.0713503 Jy ! Clean residual min=-0.007043 max=0.008489 Jy/beam ! Clean residual mean=0.000016 rms=0.002243 Jy/beam ! Combined flux in latest and established models = 0.0713502 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0713502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081766Jy sigma=0.000789 ! Fit after self-cal, rms=0.081094Jy sigma=0.000781 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.512 mas, bmaj=11.86 mas, bpa=-8.993 degrees ! Estimated noise=916.186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156265 Jy ! Component: 100 - total flux cleaned = 0.0230596 Jy ! Component: 150 - total flux cleaned = 0.027113 Jy ! Component: 200 - total flux cleaned = 0.0294748 Jy ! Total flux subtracted in 200 components = 0.0294748 Jy ! Clean residual min=-0.003705 max=0.004137 Jy/beam ! Clean residual mean=0.000005 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.100825 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 70 components and 0.100825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078003Jy sigma=0.000753 ! Fit after self-cal, rms=0.077922Jy sigma=0.000752 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.96 KP 1.13 ! LA 1.10 MK 1.00* NL 1.00* OV 0.99 ! PT 0.93 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.06 HN 1.02 KP 1.05 ! LA 1.03 MK 1.00* NL 1.00* OV 1.05 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 1.03 KP 0.95 ! LA 0.81 MK 1.00* NL 1.00* OV 0.94 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.84 KP 0.94 ! LA 0.79 MK 1.00* NL 1.00* OV 1.01 ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.077922Jy sigma=0.000752 ! Fit after self-cal, rms=0.074506Jy sigma=0.000743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.555 mas, bmaj=12.09 mas, bpa=-10.83 degrees ! Estimated noise=910.532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242457 Jy ! Component: 100 - total flux cleaned = 0.000197535 Jy ! Component: 150 - total flux cleaned = 0.000196416 Jy ! Component: 200 - total flux cleaned = 0.000254792 Jy ! Total flux subtracted in 200 components = 0.000254792 Jy ! Clean residual min=-0.003214 max=0.004221 Jy/beam ! Clean residual mean=0.000018 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.10108 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 79 components and 0.10108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074469Jy sigma=0.000742 ! Fit after self-cal, rms=0.074444Jy sigma=0.000742 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074444Jy sigma=0.000742 ! Fit after self-cal, rms=0.074954Jy sigma=0.000740 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.529 mas, bmaj=12.06 mas, bpa=-11.4 degrees ! Estimated noise=908.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285137 Jy ! Component: 100 - total flux cleaned = 0.000284922 Jy ! Component: 150 - total flux cleaned = 0.000309937 Jy ! Component: 200 - total flux cleaned = 0.000332963 Jy ! Total flux subtracted in 200 components = 0.000332963 Jy ! Clean residual min=-0.002614 max=0.003751 Jy/beam ! Clean residual mean=0.000016 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.101413 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 84 components and 0.101413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074932Jy sigma=0.000740 ! Fit after self-cal, rms=0.075019Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308331 Jy ! Component: 100 - total flux cleaned = 0.00428166 Jy ! Component: 150 - total flux cleaned = 0.00511833 Jy ! Component: 200 - total flux cleaned = 0.00543505 Jy ! Total flux subtracted in 200 components = 0.00543505 Jy ! Clean residual min=-0.002178 max=0.002369 Jy/beam ! Clean residual mean=0.000010 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.106848 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.106848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074871Jy sigma=0.000738 ! Fit after self-cal, rms=0.074803Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074803Jy sigma=0.000737 ! Fit after self-cal, rms=0.074136Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.5 mas, bmaj=12.03 mas, bpa=-12.08 degrees ! Estimated noise=902.062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142095 Jy ! Component: 100 - total flux cleaned = 0.00167039 Jy ! Component: 150 - total flux cleaned = 0.00181708 Jy ! Component: 200 - total flux cleaned = 0.00194869 Jy ! Total flux subtracted in 200 components = 0.00194869 Jy ! Clean residual min=-0.001851 max=0.002029 Jy/beam ! Clean residual mean=0.000011 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.108797 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 0.108797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074085Jy sigma=0.000737 ! Fit after self-cal, rms=0.074059Jy sigma=0.000737 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576398 Jy ! Component: 100 - total flux cleaned = 0.000769945 Jy ! Component: 150 - total flux cleaned = 0.00100224 Jy ! Component: 200 - total flux cleaned = 0.00116255 Jy ! Total flux subtracted in 200 components = 0.00116255 Jy ! Clean residual min=-0.001824 max=0.002059 Jy/beam ! Clean residual mean=0.000010 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.109959 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 129 components and 0.109959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074034Jy sigma=0.000736 ! Fit after self-cal, rms=0.074025Jy sigma=0.000736 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074025Jy sigma=0.000736 ! Fit after self-cal, rms=0.073702Jy sigma=0.000736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.15 mas, bmaj=13.64 mas, bpa=0.1404 degrees ! Estimated noise=951.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576838 Jy ! Component: 100 - total flux cleaned = 0.000607698 Jy ! Component: 150 - total flux cleaned = 0.000565882 Jy ! Component: 200 - total flux cleaned = 0.000507049 Jy ! Total flux subtracted in 200 components = 0.000507049 Jy ! Clean residual min=-0.001884 max=0.001910 Jy/beam ! Clean residual mean=0.000012 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.110466 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 154 components and 0.110466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073685Jy sigma=0.000736 ! Fit after self-cal, rms=0.073670Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000408841 Jy ! Component: 100 - total flux cleaned = 0.000306886 Jy ! Component: 150 - total flux cleaned = 0.000306423 Jy ! Component: 200 - total flux cleaned = 0.000323084 Jy ! Total flux subtracted in 200 components = 0.000323084 Jy ! Clean residual min=-0.001833 max=0.001838 Jy/beam ! Clean residual mean=0.000011 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.110789 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 167 components and 0.110789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073660Jy sigma=0.000736 ! Fit after self-cal, rms=0.073658Jy sigma=0.000736 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=12 mas, bpa=-12.5 degrees ! Estimated noise=898.904 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.461 x 12 at -12.5 degrees (North through East) ! Clean map min=-0.0018127 max=0.075155 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.233 mas, bmaj=10.4 mas, bpa=-18.41 degrees ! Estimated noise=1612.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524178 Jy ! Component: 100 - total flux cleaned = 0.0724578 Jy ! Component: 150 - total flux cleaned = 0.0832566 Jy ! Component: 200 - total flux cleaned = 0.0901286 Jy ! Total flux subtracted in 200 components = 0.0901286 Jy ! Clean residual min=-0.004614 max=0.005479 Jy/beam ! Clean residual mean=0.000017 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.0901286 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0901286 Jy ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=12 mas, bpa=-12.5 degrees ! Estimated noise=898.904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650419 Jy ! Component: 100 - total flux cleaned = 0.0105856 Jy ! Component: 150 - total flux cleaned = 0.0134421 Jy ! Component: 200 - total flux cleaned = 0.0155354 Jy ! Total flux subtracted in 200 components = 0.0155354 Jy ! Clean residual min=-0.002532 max=0.002196 Jy/beam ! Clean residual mean=0.000012 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.105664 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 81 components and 0.105664 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.15 mas, bmaj=13.64 mas, bpa=0.1404 degrees ! Estimated noise=951.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134438 Jy ! Component: 100 - total flux cleaned = 0.00234705 Jy ! Component: 150 - total flux cleaned = 0.00300302 Jy ! Component: 200 - total flux cleaned = 0.00323357 Jy ! Total flux subtracted in 200 components = 0.00323357 Jy ! Clean residual min=-0.002293 max=0.001967 Jy/beam ! Clean residual mean=0.000012 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.108897 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176702 Jy ! Component: 100 - total flux cleaned = 0.000437169 Jy ! Component: 150 - total flux cleaned = 0.000618304 Jy ! Component: 200 - total flux cleaned = 0.0008717 Jy ! Total flux subtracted in 200 components = 0.0008717 Jy ! Clean residual min=-0.002154 max=0.001926 Jy/beam ! Clean residual mean=0.000012 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.109769 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 139 components and 0.109769 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=12 mas, bpa=-12.5 degrees ! Estimated noise=898.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133449 Jy ! Component: 100 - total flux cleaned = 0.000343923 Jy ! Component: 150 - total flux cleaned = 0.000438372 Jy ! Component: 200 - total flux cleaned = 0.000584844 Jy ! Total flux subtracted in 200 components = 0.000584844 Jy ! Clean residual min=-0.001951 max=0.001925 Jy/beam ! Clean residual mean=0.000009 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.110354 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 156 components and 0.110354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073684Jy sigma=0.000736 ! Fit after self-cal, rms=0.073662Jy sigma=0.000736 wmodel J0858+1405_S_2014_08_09_pus_map.mod ! Writing 156 model components to file: J0858+1405_S_2014_08_09_pus_map.mod wobs J0858+1405_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0858+1405_S_2014_08_09_pus_uvs.fits wwins J0858+1405_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J0858+1405_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.74522e-05 Jy ! Component: 100 - total flux cleaned = -3.51239e-05 Jy ! Component: 150 - total flux cleaned = -0.000174242 Jy ! Component: 200 - total flux cleaned = -0.000276843 Jy ! Component: 250 - total flux cleaned = -0.000348731 Jy ! Component: 300 - total flux cleaned = -0.000395185 Jy ! Component: 350 - total flux cleaned = -0.000483049 Jy ! Component: 400 - total flux cleaned = -0.000565427 Jy ! Component: 450 - total flux cleaned = -0.000505647 Jy ! Component: 500 - total flux cleaned = -0.000525291 Jy ! Component: 550 - total flux cleaned = -0.000524816 Jy ! Component: 600 - total flux cleaned = -0.00050649 Jy ! Component: 650 - total flux cleaned = -0.000402832 Jy ! Component: 700 - total flux cleaned = -0.000353311 Jy ! Component: 750 - total flux cleaned = -0.000336905 Jy ! Component: 800 - total flux cleaned = -0.000274056 Jy ! Component: 850 - total flux cleaned = -0.000183047 Jy ! Component: 900 - total flux cleaned = -0.000123764 Jy ! Component: 950 - total flux cleaned = -9.48308e-05 Jy ! Component: 1000 - total flux cleaned = -9.48487e-05 Jy ! Component: 1050 - total flux cleaned = -8.10281e-05 Jy ! Component: 1100 - total flux cleaned = -6.76855e-05 Jy ! Component: 1150 - total flux cleaned = -5.47175e-05 Jy ! Component: 1200 - total flux cleaned = -1.54889e-05 Jy ! Component: 1250 - total flux cleaned = 3.62074e-05 Jy ! Component: 1300 - total flux cleaned = 0.000100198 Jy ! Component: 1350 - total flux cleaned = 0.000137812 Jy ! Component: 1400 - total flux cleaned = 0.000175099 Jy ! Component: 1450 - total flux cleaned = 0.000223953 Jy ! Component: 1500 - total flux cleaned = 0.000260057 Jy ! Component: 1550 - total flux cleaned = 0.000283868 Jy ! Component: 1600 - total flux cleaned = 0.00031924 Jy ! Component: 1650 - total flux cleaned = 0.000354112 Jy ! Component: 1700 - total flux cleaned = 0.000388437 Jy ! Component: 1750 - total flux cleaned = 0.000388523 Jy ! Component: 1800 - total flux cleaned = 0.000411018 Jy ! Component: 1850 - total flux cleaned = 0.000455338 Jy ! Component: 1900 - total flux cleaned = 0.000477166 Jy ! Component: 1950 - total flux cleaned = 0.000444542 Jy ! Component: 2000 - total flux cleaned = 0.00044458 Jy ! Component: 2050 - total flux cleaned = 0.000423327 Jy ! Component: 2100 - total flux cleaned = 0.000402135 Jy ! Component: 2150 - total flux cleaned = 0.000381146 Jy ! Component: 2200 - total flux cleaned = 0.000381122 Jy ! Component: 2250 - total flux cleaned = 0.000339463 Jy ! Component: 2300 - total flux cleaned = 0.000318851 Jy ! Component: 2350 - total flux cleaned = 0.00030855 Jy ! Component: 2400 - total flux cleaned = 0.000288004 Jy ! Component: 2450 - total flux cleaned = 0.000247136 Jy ! Component: 2500 - total flux cleaned = 0.000236913 Jy ! Component: 2550 - total flux cleaned = 0.000196291 Jy ! Component: 2600 - total flux cleaned = 0.000176063 Jy ! Component: 2650 - total flux cleaned = 0.000125637 Jy ! Component: 2700 - total flux cleaned = 0.000115555 Jy ! Component: 2750 - total flux cleaned = 8.54667e-05 Jy ! Component: 2800 - total flux cleaned = 5.54862e-05 Jy ! Component: 2850 - total flux cleaned = 3.55425e-05 Jy ! Component: 2900 - total flux cleaned = 5.60627e-06 Jy ! Component: 2950 - total flux cleaned = -3.41644e-05 Jy ! Component: 3000 - total flux cleaned = -5.40742e-05 Jy ! Component: 3050 - total flux cleaned = -9.38393e-05 Jy ! Component: 3100 - total flux cleaned = -0.000113774 Jy ! Component: 3150 - total flux cleaned = -0.000153507 Jy ! Component: 3200 - total flux cleaned = -0.000183319 Jy ! Component: 3250 - total flux cleaned = -0.000203187 Jy ! Component: 3300 - total flux cleaned = -0.000233002 Jy ! Component: 3350 - total flux cleaned = -0.000252859 Jy ! Component: 3400 - total flux cleaned = -0.000282715 Jy ! Component: 3450 - total flux cleaned = -0.00034248 Jy ! Component: 3500 - total flux cleaned = -0.000402364 Jy ! Component: 3550 - total flux cleaned = -0.000432358 Jy ! Component: 3600 - total flux cleaned = -0.000472408 Jy ! Component: 3650 - total flux cleaned = -0.000532566 Jy ! Component: 3700 - total flux cleaned = -0.000572761 Jy ! Component: 3750 - total flux cleaned = -0.000623275 Jy ! Component: 3800 - total flux cleaned = -0.000663799 Jy ! Component: 3850 - total flux cleaned = -0.000694179 Jy ! Component: 3900 - total flux cleaned = -0.000714494 Jy ! Component: 3950 - total flux cleaned = -0.000734906 Jy ! Component: 4000 - total flux cleaned = -0.000786144 Jy ! Component: 4050 - total flux cleaned = -0.000786131 Jy ! Total flux subtracted in 4096 components = -0.000837737 Jy ! Clean residual min=-0.000709 max=0.000728 Jy/beam ! Clean residual mean=0.000004 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.109516 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 401 components and 0.109516 Jy ![Exited script file: muppet] wmap "J0858+1405_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.461 x 12 at -12.5 degrees (North through East) ! Clean map min=-0.0015349 max=0.07409 Jy/beam ! Writing clean map to FITS file: J0858+1405_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0740899 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000163529 device "J0858+1405_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0858+1405_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.662149 0.662149 1.3243 2.6486 5.29719 10.5944 21.1888 42.3776 84.7551 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.461 x 12 at -12.5 degrees (North through East) ! Clean map min=-0.0015349 max=0.07409 Jy/beam quit ! Quitting program ! Log file J0858+1405_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:00:42 2016