! Started logfile: J0856+7146_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:49:36 2017 obs J0856+7146_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J0856+7146_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0856+7146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0856+7146_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948752Jy sigma=0.010032 ! Fit after self-cal, rms=0.933202Jy sigma=0.009901 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.31 mas, bmaj=10.82 mas, bpa=80.42 degrees ! Estimated noise=1199.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0543577 Jy ! Component: 100 - total flux cleaned = 0.0662357 Jy ! Total flux subtracted in 100 components = 0.0662357 Jy ! Clean residual min=-0.004557 max=0.004615 Jy/beam ! Clean residual mean=-0.000002 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.0662357 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0662357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079084Jy sigma=0.000768 ! Fit after self-cal, rms=0.079016Jy sigma=0.000768 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=11.27 mas, bpa=80.24 degrees ! Estimated noise=712.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391191 Jy ! Component: 100 - total flux cleaned = 0.00606959 Jy ! Component: 150 - total flux cleaned = 0.00748551 Jy ! Component: 200 - total flux cleaned = 0.00848315 Jy ! Total flux subtracted in 200 components = 0.00848315 Jy ! Clean residual min=-0.002362 max=0.002352 Jy/beam ! Clean residual mean=-0.000006 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0747189 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 37 components and 0.0747188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078800Jy sigma=0.000765 ! Fit after self-cal, rms=0.078788Jy sigma=0.000765 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.97 KP 1.06 ! LA 0.98 MK 1.02 NL 0.93 OV 0.96 ! PT 1.08 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00 KP 1.03 ! LA 0.99 MK 0.95 NL 1.02 OV 1.02 ! PT 1.06 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.00 KP 0.86 ! LA 0.85 MK 1.03 NL 1.03 OV 0.94 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.03 KP 0.84 ! LA 0.92 MK 1.03 NL 1.01 OV 0.98 ! PT 1.04 SC 1.07 ! ! ! Fit before self-cal, rms=0.078788Jy sigma=0.000765 ! Fit after self-cal, rms=0.077950Jy sigma=0.000762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=11.24 mas, bpa=80.22 degrees ! Estimated noise=707.015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000874525 Jy ! Component: 100 - total flux cleaned = 0.000894956 Jy ! Component: 150 - total flux cleaned = 0.000946742 Jy ! Component: 200 - total flux cleaned = 0.000979098 Jy ! Total flux subtracted in 200 components = 0.000979098 Jy ! Clean residual min=-0.001855 max=0.001915 Jy/beam ! Clean residual mean=-0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0756979 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.0756979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077938Jy sigma=0.000762 ! Fit after self-cal, rms=0.077948Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077948Jy sigma=0.000762 ! Fit after self-cal, rms=0.078073Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=11.23 mas, bpa=80.21 degrees ! Estimated noise=706.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138523 Jy ! Component: 100 - total flux cleaned = 0.000104052 Jy ! Component: 150 - total flux cleaned = 0.000121455 Jy ! Component: 200 - total flux cleaned = 0.000137247 Jy ! Total flux subtracted in 200 components = 0.000137247 Jy ! Clean residual min=-0.001889 max=0.001949 Jy/beam ! Clean residual mean=-0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0758352 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.0758352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078070Jy sigma=0.000762 ! Fit after self-cal, rms=0.078074Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.35893e-05 Jy ! Component: 100 - total flux cleaned = 6.61707e-05 Jy ! Component: 150 - total flux cleaned = 7.26523e-05 Jy ! Component: 200 - total flux cleaned = 8.46953e-05 Jy ! Total flux subtracted in 200 components = 8.46953e-05 Jy ! Clean residual min=-0.001909 max=0.001946 Jy/beam ! Clean residual mean=-0.000001 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0759199 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.0759199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078072Jy sigma=0.000762 ! Fit after self-cal, rms=0.078071Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078071Jy sigma=0.000762 ! Fit after self-cal, rms=0.078163Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=11.23 mas, bpa=80.21 degrees ! Estimated noise=705.769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117427 Jy ! Component: 100 - total flux cleaned = -0.000125002 Jy ! Component: 150 - total flux cleaned = -0.000125107 Jy ! Component: 200 - total flux cleaned = -0.000119149 Jy ! Total flux subtracted in 200 components = -0.000119149 Jy ! Clean residual min=-0.001912 max=0.001942 Jy/beam ! Clean residual mean=-0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0758007 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.0758007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078162Jy sigma=0.000762 ! Fit after self-cal, rms=0.078166Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.1573e-05 Jy ! Component: 100 - total flux cleaned = -1.11969e-05 Jy ! Component: 150 - total flux cleaned = -1.11211e-05 Jy ! Component: 200 - total flux cleaned = -6.24691e-06 Jy ! Total flux subtracted in 200 components = -6.24691e-06 Jy ! Clean residual min=-0.001926 max=0.001944 Jy/beam ! Clean residual mean=-0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0757945 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.0757945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078165Jy sigma=0.000762 ! Fit after self-cal, rms=0.078164Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078164Jy sigma=0.000762 ! Fit after self-cal, rms=0.078200Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.893 mas, bmaj=14.71 mas, bpa=70.1 degrees ! Estimated noise=905.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290159 Jy ! Component: 100 - total flux cleaned = -0.000309756 Jy ! Component: 150 - total flux cleaned = -0.000315196 Jy ! Component: 200 - total flux cleaned = -0.000315157 Jy ! Total flux subtracted in 200 components = -0.000315157 Jy ! Clean residual min=-0.001978 max=0.001868 Jy/beam ! Clean residual mean=-0.000003 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0754793 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.0754793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078201Jy sigma=0.000762 ! Fit after self-cal, rms=0.078203Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.32369e-05 Jy ! Component: 100 - total flux cleaned = -1.82943e-05 Jy ! Component: 150 - total flux cleaned = -1.40887e-05 Jy ! Component: 200 - total flux cleaned = -1.0105e-05 Jy ! Total flux subtracted in 200 components = -1.0105e-05 Jy ! Clean residual min=-0.001977 max=0.001869 Jy/beam ! Clean residual mean=-0.000003 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0754692 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.0754692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078203Jy sigma=0.000762 ! Fit after self-cal, rms=0.078203Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=11.23 mas, bpa=80.2 degrees ! Estimated noise=705.226 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.922 x 11.23 at 80.2 degrees (North through East) ! Clean map min=-0.0017838 max=0.069646 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=10.78 mas, bpa=80.39 degrees ! Estimated noise=1201.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0543666 Jy ! Component: 100 - total flux cleaned = 0.0662704 Jy ! Component: 150 - total flux cleaned = 0.0701557 Jy ! Component: 200 - total flux cleaned = 0.0720543 Jy ! Total flux subtracted in 200 components = 0.0720543 Jy ! Clean residual min=-0.003759 max=0.003508 Jy/beam ! Clean residual mean=-0.000002 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0720543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0720543 Jy ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=11.23 mas, bpa=80.2 degrees ! Estimated noise=705.226 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193849 Jy ! Component: 100 - total flux cleaned = 0.00273525 Jy ! Component: 150 - total flux cleaned = 0.00306595 Jy ! Component: 200 - total flux cleaned = 0.00328298 Jy ! Total flux subtracted in 200 components = 0.00328298 Jy ! Clean residual min=-0.001890 max=0.001953 Jy/beam ! Clean residual mean=-0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0753373 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 54 components and 0.0753372 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.893 mas, bmaj=14.71 mas, bpa=70.1 degrees ! Estimated noise=905.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69282e-05 Jy ! Component: 100 - total flux cleaned = 0.000251908 Jy ! Component: 150 - total flux cleaned = 0.000433516 Jy ! Component: 200 - total flux cleaned = 0.000563237 Jy ! Total flux subtracted in 200 components = 0.000563237 Jy ! Clean residual min=-0.001752 max=0.001894 Jy/beam ! Clean residual mean=-0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0759005 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119078 Jy ! Component: 100 - total flux cleaned = 0.000216775 Jy ! Component: 150 - total flux cleaned = 0.000308897 Jy ! Component: 200 - total flux cleaned = 0.000379454 Jy ! Total flux subtracted in 200 components = 0.000379454 Jy ! Clean residual min=-0.001652 max=0.001936 Jy/beam ! Clean residual mean=-0.000003 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0762799 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 92 components and 0.0762799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=11.23 mas, bpa=80.2 degrees ! Estimated noise=705.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355027 Jy ! Component: 100 - total flux cleaned = 0.000354421 Jy ! Component: 150 - total flux cleaned = 0.000421301 Jy ! Component: 200 - total flux cleaned = 0.00046506 Jy ! Total flux subtracted in 200 components = 0.00046506 Jy ! Clean residual min=-0.001820 max=0.001980 Jy/beam ! Clean residual mean=-0.000002 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.076745 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.076745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078179Jy sigma=0.000762 ! Fit after self-cal, rms=0.078180Jy sigma=0.000762 wmodel J0856+7146_S_2015_01_22_pus_map.mod ! Writing 110 model components to file: J0856+7146_S_2015_01_22_pus_map.mod wobs J0856+7146_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J0856+7146_S_2015_01_22_pus_uvs.fits wwins J0856+7146_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J0856+7146_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029924 Jy ! Component: 100 - total flux cleaned = -0.000519242 Jy ! Component: 150 - total flux cleaned = -0.000577756 Jy ! Component: 200 - total flux cleaned = -0.000497239 Jy ! Component: 250 - total flux cleaned = -0.000446595 Jy ! Component: 300 - total flux cleaned = -0.000495302 Jy ! Component: 350 - total flux cleaned = -0.000471764 Jy ! Component: 400 - total flux cleaned = -0.000448983 Jy ! Component: 450 - total flux cleaned = -0.000315773 Jy ! Component: 500 - total flux cleaned = -0.000229563 Jy ! Component: 550 - total flux cleaned = -6.18344e-05 Jy ! Component: 600 - total flux cleaned = 6.08275e-05 Jy ! Component: 650 - total flux cleaned = 0.000120789 Jy ! Component: 700 - total flux cleaned = 0.000237254 Jy ! Component: 750 - total flux cleaned = 0.000274997 Jy ! Component: 800 - total flux cleaned = 0.000311762 Jy ! Component: 850 - total flux cleaned = 0.000329564 Jy ! Component: 900 - total flux cleaned = 0.000364939 Jy ! Component: 950 - total flux cleaned = 0.000434831 Jy ! Component: 1000 - total flux cleaned = 0.00048606 Jy ! Component: 1050 - total flux cleaned = 0.000503057 Jy ! Component: 1100 - total flux cleaned = 0.000552785 Jy ! Component: 1150 - total flux cleaned = 0.000633728 Jy ! Component: 1200 - total flux cleaned = 0.000633589 Jy ! Component: 1250 - total flux cleaned = 0.000665152 Jy ! Component: 1300 - total flux cleaned = 0.000742636 Jy ! Component: 1350 - total flux cleaned = 0.000788395 Jy ! Component: 1400 - total flux cleaned = 0.000848809 Jy ! Component: 1450 - total flux cleaned = 0.000908149 Jy ! Component: 1500 - total flux cleaned = 0.000981512 Jy ! Component: 1550 - total flux cleaned = 0.00105384 Jy ! Component: 1600 - total flux cleaned = 0.0011252 Jy ! Component: 1650 - total flux cleaned = 0.0011955 Jy ! Component: 1700 - total flux cleaned = 0.00123718 Jy ! Component: 1750 - total flux cleaned = 0.00130573 Jy ! Component: 1800 - total flux cleaned = 0.00140027 Jy ! Component: 1850 - total flux cleaned = 0.00145359 Jy ! Component: 1900 - total flux cleaned = 0.00149345 Jy ! Component: 1950 - total flux cleaned = 0.00161146 Jy ! Component: 2000 - total flux cleaned = 0.00168929 Jy ! Component: 2050 - total flux cleaned = 0.00177905 Jy ! Component: 2100 - total flux cleaned = 0.00182993 Jy ! Component: 2150 - total flux cleaned = 0.00191802 Jy ! Component: 2200 - total flux cleaned = 0.00199286 Jy ! Component: 2250 - total flux cleaned = 0.00204216 Jy ! Component: 2300 - total flux cleaned = 0.00210335 Jy ! Component: 2350 - total flux cleaned = 0.00217625 Jy ! Component: 2400 - total flux cleaned = 0.00221241 Jy ! Component: 2450 - total flux cleaned = 0.00227214 Jy ! Component: 2500 - total flux cleaned = 0.00236677 Jy ! Component: 2550 - total flux cleaned = 0.00240189 Jy ! Component: 2600 - total flux cleaned = 0.00247178 Jy ! Component: 2650 - total flux cleaned = 0.00252949 Jy ! Component: 2700 - total flux cleaned = 0.00260969 Jy ! Component: 2750 - total flux cleaned = 0.00267786 Jy ! Component: 2800 - total flux cleaned = 0.00268922 Jy ! Component: 2850 - total flux cleaned = 0.00275652 Jy ! Component: 2900 - total flux cleaned = 0.00283456 Jy ! Component: 2950 - total flux cleaned = 0.00285661 Jy ! Component: 3000 - total flux cleaned = 0.00291168 Jy ! Component: 3050 - total flux cleaned = 0.00292264 Jy ! Component: 3100 - total flux cleaned = 0.00298798 Jy ! Component: 3150 - total flux cleaned = 0.00297721 Jy ! Component: 3200 - total flux cleaned = 0.00300949 Jy ! Component: 3250 - total flux cleaned = 0.00304165 Jy ! Component: 3300 - total flux cleaned = 0.00308416 Jy ! Component: 3350 - total flux cleaned = 0.00309483 Jy ! Component: 3400 - total flux cleaned = 0.00311587 Jy ! Component: 3450 - total flux cleaned = 0.00312636 Jy ! Component: 3500 - total flux cleaned = 0.00315779 Jy ! Component: 3550 - total flux cleaned = 0.00316816 Jy ! Component: 3600 - total flux cleaned = 0.00323034 Jy ! Component: 3650 - total flux cleaned = 0.00325088 Jy ! Component: 3700 - total flux cleaned = 0.00329193 Jy ! Component: 3750 - total flux cleaned = 0.00333282 Jy ! Component: 3800 - total flux cleaned = 0.00339389 Jy ! Component: 3850 - total flux cleaned = 0.00339393 Jy ! Component: 3900 - total flux cleaned = 0.00345459 Jy ! Component: 3950 - total flux cleaned = 0.00353511 Jy ! Component: 4000 - total flux cleaned = 0.00356519 Jy ! Component: 4050 - total flux cleaned = 0.00359516 Jy ! Total flux subtracted in 4096 components = 0.00363501 Jy ! Clean residual min=-0.000608 max=0.000539 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.08038 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 383 components and 0.08038 Jy ![Exited script file: muppet] wmap "J0856+7146_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.922 x 11.23 at 80.2 degrees (North through East) ! Clean map min=-0.0014658 max=0.069915 Jy/beam ! Writing clean map to FITS file: J0856+7146_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0699151 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173552 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.744697 0.744697 1.48939 2.97879 5.95758 11.9152 23.8303 47.6606 95.3213 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.922 x 11.23 at 80.2 degrees (North through East) ! Clean map min=-0.0014658 max=0.069915 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0856+7146_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:49:42 2017