! Started logfile: J0853-3824_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:18:55 2017 obs J0853-3824_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0853-3824_S_2015_01_23_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.275881 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0853-3824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 6108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0853-3824_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945190Jy sigma=0.007389 ! Fit after self-cal, rms=0.905782Jy sigma=0.007117 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=32.24 mas, bpa=-4.047 degrees ! Estimated noise=1407.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746355 Jy ! Component: 100 - total flux cleaned = 0.098097 Jy ! Total flux subtracted in 100 components = 0.098097 Jy ! Clean residual min=-0.007828 max=0.010803 Jy/beam ! Clean residual mean=-0.000452 rms=0.003200 Jy/beam ! Combined flux in latest and established models = 0.098097 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.098097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103698Jy sigma=0.000753 ! Fit after self-cal, rms=0.103513Jy sigma=0.000751 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.319 mas, bmaj=35.65 mas, bpa=-2.726 degrees ! Estimated noise=1169.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164995 Jy ! Component: 100 - total flux cleaned = 0.025638 Jy ! Component: 150 - total flux cleaned = 0.0315743 Jy ! Component: 200 - total flux cleaned = 0.0356374 Jy ! Total flux subtracted in 200 components = 0.0356374 Jy ! Clean residual min=-0.004940 max=0.004964 Jy/beam ! Clean residual mean=-0.000203 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.133734 Jy ! Performing phase self-cal ! Adding 95 model components to the UV plane model. ! The established model now contains 120 components and 0.133734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100625Jy sigma=0.000729 ! Fit after self-cal, rms=0.100530Jy sigma=0.000728 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00* KP 1.09 ! LA 0.95 MK 1.00* NL 1.12 OV 1.07 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.00* KP 1.05 ! LA 0.99 MK 1.00* NL 1.11 OV 1.05 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00* KP 0.87 ! LA 0.79 MK 1.00* NL 1.14 OV 0.98 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00* KP 0.83 ! LA 0.79 MK 1.00* NL 1.09 OV 1.06 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.100530Jy sigma=0.000728 ! Fit after self-cal, rms=0.098134Jy sigma=0.000717 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.609 mas, bmaj=36.49 mas, bpa=-2.664 degrees ! Estimated noise=1169.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191423 Jy ! Component: 100 - total flux cleaned = 0.00218761 Jy ! Component: 150 - total flux cleaned = 0.00242806 Jy ! Component: 200 - total flux cleaned = 0.00263937 Jy ! Total flux subtracted in 200 components = 0.00263937 Jy ! Clean residual min=-0.002446 max=0.003804 Jy/beam ! Clean residual mean=-0.000074 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.136374 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 0.136374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098034Jy sigma=0.000717 ! Fit after self-cal, rms=0.097985Jy sigma=0.000716 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097985Jy sigma=0.000716 ! Fit after self-cal, rms=0.099185Jy sigma=0.000715 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.636 mas, bmaj=36.47 mas, bpa=-2.786 degrees ! Estimated noise=1176.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101974 Jy ! Component: 100 - total flux cleaned = 0.00111756 Jy ! Component: 150 - total flux cleaned = 0.00133415 Jy ! Component: 200 - total flux cleaned = 0.00144815 Jy ! Total flux subtracted in 200 components = 0.00144815 Jy ! Clean residual min=-0.002477 max=0.003564 Jy/beam ! Clean residual mean=-0.000061 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.137822 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 162 components and 0.137822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099133Jy sigma=0.000715 ! Fit after self-cal, rms=0.099162Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, -31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338122 Jy ! Component: 100 - total flux cleaned = 0.00484282 Jy ! Component: 150 - total flux cleaned = 0.00544075 Jy ! Component: 200 - total flux cleaned = 0.0060092 Jy ! Total flux subtracted in 200 components = 0.0060092 Jy ! Clean residual min=-0.002030 max=0.001850 Jy/beam ! Clean residual mean=-0.000019 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.143831 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 196 components and 0.143831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099029Jy sigma=0.000714 ! Fit after self-cal, rms=0.098990Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098990Jy sigma=0.000713 ! Fit after self-cal, rms=0.099212Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.639 mas, bmaj=36.45 mas, bpa=-2.792 degrees ! Estimated noise=1176.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192812 Jy ! Component: 100 - total flux cleaned = 0.00267894 Jy ! Component: 150 - total flux cleaned = 0.00315243 Jy ! Component: 200 - total flux cleaned = 0.00338537 Jy ! Total flux subtracted in 200 components = 0.00338537 Jy ! Clean residual min=-0.001787 max=0.001849 Jy/beam ! Clean residual mean=-0.000008 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.147216 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 222 components and 0.147216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099155Jy sigma=0.000713 ! Fit after self-cal, rms=0.099155Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128339 Jy ! Component: 100 - total flux cleaned = 0.00143472 Jy ! Component: 150 - total flux cleaned = 0.00149946 Jy ! Component: 200 - total flux cleaned = 0.00158701 Jy ! Total flux subtracted in 200 components = 0.00158701 Jy ! Clean residual min=-0.001615 max=0.001940 Jy/beam ! Clean residual mean=0.000004 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.148803 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 251 components and 0.148803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099121Jy sigma=0.000713 ! Fit after self-cal, rms=0.099120Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099120Jy sigma=0.000713 ! Fit after self-cal, rms=0.099153Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10 mas, bmaj=40.59 mas, bpa=-1.931 degrees ! Estimated noise=1172.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744725 Jy ! Component: 100 - total flux cleaned = 0.000962236 Jy ! Component: 150 - total flux cleaned = 0.000984609 Jy ! Component: 200 - total flux cleaned = 0.00104612 Jy ! Total flux subtracted in 200 components = 0.00104612 Jy ! Clean residual min=-0.001423 max=0.001648 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.14985 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 277 components and 0.14985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099132Jy sigma=0.000713 ! Fit after self-cal, rms=0.099134Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482707 Jy ! Component: 100 - total flux cleaned = 0.000506171 Jy ! Component: 150 - total flux cleaned = 0.000525058 Jy ! Component: 200 - total flux cleaned = 0.000561015 Jy ! Total flux subtracted in 200 components = 0.000561015 Jy ! Clean residual min=-0.001410 max=0.001677 Jy/beam ! Clean residual mean=0.000008 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.150411 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 294 components and 0.150411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099119Jy sigma=0.000712 ! Fit after self-cal, rms=0.099119Jy sigma=0.000712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.635 mas, bmaj=36.45 mas, bpa=-2.811 degrees ! Estimated noise=1177.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.635 x 36.45 at -2.811 degrees (North through East) ! Clean map min=-0.0015235 max=0.096032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.785 mas, bmaj=33.17 mas, bpa=-4.052 degrees ! Estimated noise=1432.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0745263 Jy ! Component: 100 - total flux cleaned = 0.0993071 Jy ! Component: 150 - total flux cleaned = 0.112378 Jy ! Component: 200 - total flux cleaned = 0.120586 Jy ! Total flux subtracted in 200 components = 0.120586 Jy ! Clean residual min=-0.005880 max=0.004827 Jy/beam ! Clean residual mean=-0.000236 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.120586 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 68 model components to the UV plane model. ! The established model now contains 68 components and 0.120586 Jy ! Inverting map and beam ! Estimated beam: bmin=8.635 mas, bmaj=36.45 mas, bpa=-2.811 degrees ! Estimated noise=1177.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727787 Jy ! Component: 100 - total flux cleaned = 0.0122436 Jy ! Component: 150 - total flux cleaned = 0.015923 Jy ! Component: 200 - total flux cleaned = 0.0186837 Jy ! Total flux subtracted in 200 components = 0.0186837 Jy ! Clean residual min=-0.002979 max=0.002503 Jy/beam ! Clean residual mean=-0.000090 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.139269 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 139 components and 0.139269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10 mas, bmaj=40.59 mas, bpa=-1.931 degrees ! Estimated noise=1172.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228867 Jy ! Component: 100 - total flux cleaned = 0.00405795 Jy ! Component: 150 - total flux cleaned = 0.00511522 Jy ! Component: 200 - total flux cleaned = 0.00596573 Jy ! Total flux subtracted in 200 components = 0.00596573 Jy ! Clean residual min=-0.002117 max=0.001575 Jy/beam ! Clean residual mean=-0.000044 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.145235 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648912 Jy ! Component: 100 - total flux cleaned = 0.0011059 Jy ! Component: 150 - total flux cleaned = 0.00151331 Jy ! Component: 200 - total flux cleaned = 0.00178805 Jy ! Total flux subtracted in 200 components = 0.00178805 Jy ! Clean residual min=-0.001859 max=0.001599 Jy/beam ! Clean residual mean=-0.000025 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.147023 Jy ! Adding 138 model components to the UV plane model. ! The established model now contains 271 components and 0.147023 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.635 mas, bmaj=36.45 mas, bpa=-2.811 degrees ! Estimated noise=1177.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208877 Jy ! Component: 100 - total flux cleaned = 0.000558824 Jy ! Component: 150 - total flux cleaned = 0.000813634 Jy ! Component: 200 - total flux cleaned = 0.00106695 Jy ! Total flux subtracted in 200 components = 0.00106695 Jy ! Clean residual min=-0.001879 max=0.001846 Jy/beam ! Clean residual mean=-0.000014 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.14809 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 299 components and 0.14809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099125Jy sigma=0.000712 ! Fit after self-cal, rms=0.099092Jy sigma=0.000712 wmodel J0853-3824_S_2015_01_23_pus_map.mod ! Writing 299 model components to file: J0853-3824_S_2015_01_23_pus_map.mod wobs J0853-3824_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0853-3824_S_2015_01_23_pus_uvs.fits wwins J0853-3824_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0853-3824_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.60122e-06 Jy ! Component: 100 - total flux cleaned = -3.87779e-06 Jy ! Component: 150 - total flux cleaned = 7.22735e-05 Jy ! Component: 200 - total flux cleaned = 0.000141826 Jy ! Component: 250 - total flux cleaned = 0.00020864 Jy ! Component: 300 - total flux cleaned = 0.000313771 Jy ! Component: 350 - total flux cleaned = 0.000472471 Jy ! Component: 400 - total flux cleaned = 0.0005283 Jy ! Component: 450 - total flux cleaned = 0.000655268 Jy ! Component: 500 - total flux cleaned = 0.000778282 Jy ! Component: 550 - total flux cleaned = 0.000931478 Jy ! Component: 600 - total flux cleaned = 0.00104642 Jy ! Component: 650 - total flux cleaned = 0.00114236 Jy ! Component: 700 - total flux cleaned = 0.00126568 Jy ! Component: 750 - total flux cleaned = 0.00134009 Jy ! Component: 800 - total flux cleaned = 0.00141273 Jy ! Component: 850 - total flux cleaned = 0.0015112 Jy ! Component: 900 - total flux cleaned = 0.00156572 Jy ! Component: 950 - total flux cleaned = 0.00159237 Jy ! Component: 1000 - total flux cleaned = 0.00165732 Jy ! Component: 1050 - total flux cleaned = 0.00174613 Jy ! Component: 1100 - total flux cleaned = 0.00179536 Jy ! Component: 1150 - total flux cleaned = 0.00184368 Jy ! Component: 1200 - total flux cleaned = 0.00186741 Jy ! Component: 1250 - total flux cleaned = 0.00193689 Jy ! Component: 1300 - total flux cleaned = 0.00199358 Jy ! Component: 1350 - total flux cleaned = 0.00206038 Jy ! Component: 1400 - total flux cleaned = 0.00211499 Jy ! Component: 1450 - total flux cleaned = 0.00212583 Jy ! Component: 1500 - total flux cleaned = 0.00214689 Jy ! Component: 1550 - total flux cleaned = 0.00216769 Jy ! Component: 1600 - total flux cleaned = 0.00218827 Jy ! Component: 1650 - total flux cleaned = 0.0021985 Jy ! Component: 1700 - total flux cleaned = 0.00224848 Jy ! Component: 1750 - total flux cleaned = 0.00232745 Jy ! Component: 1800 - total flux cleaned = 0.00239604 Jy ! Component: 1850 - total flux cleaned = 0.0024837 Jy ! Component: 1900 - total flux cleaned = 0.00255148 Jy ! Component: 1950 - total flux cleaned = 0.0026285 Jy ! Component: 2000 - total flux cleaned = 0.00270516 Jy ! Component: 2050 - total flux cleaned = 0.00278152 Jy ! Component: 2100 - total flux cleaned = 0.00285749 Jy ! Component: 2150 - total flux cleaned = 0.00293317 Jy ! Component: 2200 - total flux cleaned = 0.00300841 Jy ! Component: 2250 - total flux cleaned = 0.00307417 Jy ! Component: 2300 - total flux cleaned = 0.0031678 Jy ! Component: 2350 - total flux cleaned = 0.00327067 Jy ! Component: 2400 - total flux cleaned = 0.00337366 Jy ! Component: 2450 - total flux cleaned = 0.00346732 Jy ! Component: 2500 - total flux cleaned = 0.0035799 Jy ! Component: 2550 - total flux cleaned = 0.00361764 Jy ! Component: 2600 - total flux cleaned = 0.00363664 Jy ! Component: 2650 - total flux cleaned = 0.00366548 Jy ! Component: 2700 - total flux cleaned = 0.00371365 Jy ! Component: 2750 - total flux cleaned = 0.00374279 Jy ! Component: 2800 - total flux cleaned = 0.00377218 Jy ! Component: 2850 - total flux cleaned = 0.00381165 Jy ! Component: 2900 - total flux cleaned = 0.0038414 Jy ! Component: 2950 - total flux cleaned = 0.00385133 Jy ! Component: 3000 - total flux cleaned = 0.00386155 Jy ! Component: 3050 - total flux cleaned = 0.00386156 Jy ! Component: 3100 - total flux cleaned = 0.00388228 Jy ! Component: 3150 - total flux cleaned = 0.00389301 Jy ! Component: 3200 - total flux cleaned = 0.0038823 Jy ! Component: 3250 - total flux cleaned = 0.00389325 Jy ! Component: 3300 - total flux cleaned = 0.00389321 Jy ! Component: 3350 - total flux cleaned = 0.0039045 Jy ! Component: 3400 - total flux cleaned = 0.00391602 Jy ! Component: 3450 - total flux cleaned = 0.00390448 Jy ! Component: 3500 - total flux cleaned = 0.00391637 Jy ! Component: 3550 - total flux cleaned = 0.00390431 Jy ! Component: 3600 - total flux cleaned = 0.00391633 Jy ! Component: 3650 - total flux cleaned = 0.00390399 Jy ! Component: 3700 - total flux cleaned = 0.00391627 Jy ! Component: 3750 - total flux cleaned = 0.00391642 Jy ! Component: 3800 - total flux cleaned = 0.00390377 Jy ! Component: 3850 - total flux cleaned = 0.00391681 Jy ! Component: 3900 - total flux cleaned = 0.00391678 Jy ! Component: 3950 - total flux cleaned = 0.00394373 Jy ! Component: 4000 - total flux cleaned = 0.00394369 Jy ! Component: 4050 - total flux cleaned = 0.00394369 Jy ! Total flux subtracted in 4096 components = 0.00395782 Jy ! Clean residual min=-0.000811 max=0.000791 Jy/beam ! Clean residual mean=0.000004 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.152048 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 615 components and 0.152048 Jy ![Exited script file: muppet] wmap "J0853-3824_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.635 x 36.45 at -2.811 degrees (North through East) ! Clean map min=-0.0018467 max=0.097302 Jy/beam ! Writing clean map to FITS file: J0853-3824_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0973017 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000257847 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.794993 0.794993 1.58999 3.17997 6.35994 12.7199 25.4398 50.8795 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.635 x 36.45 at -2.811 degrees (North through East) ! Clean map min=-0.0018467 max=0.097302 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0853-3824_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:19:00 2017