! Started logfile: J0852-1528_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:00:11 2016 obs J0852-1528_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0852-1528_S_2014_08_09_pus_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.76478 visibilities/baseline/integration-bin. ! Found source: J0852-1528 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 14592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0852-1528_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931320Jy sigma=0.008885 ! Fit after self-cal, rms=0.899023Jy sigma=0.008578 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=10.78 mas, bpa=15.26 degrees ! Estimated noise=890.568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0783496 Jy ! Component: 100 - total flux cleaned = 0.0957442 Jy ! Total flux subtracted in 100 components = 0.0957442 Jy ! Clean residual min=-0.003790 max=0.005853 Jy/beam ! Clean residual mean=0.000005 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.0957442 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0957442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087418Jy sigma=0.000789 ! Fit after self-cal, rms=0.087417Jy sigma=0.000789 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=11.94 mas, bpa=13.89 degrees ! Estimated noise=621.882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860015 Jy ! Component: 100 - total flux cleaned = 0.0126727 Jy ! Component: 150 - total flux cleaned = 0.0150728 Jy ! Component: 200 - total flux cleaned = 0.0165611 Jy ! Total flux subtracted in 200 components = 0.0165611 Jy ! Clean residual min=-0.002514 max=0.003319 Jy/beam ! Clean residual mean=0.000005 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.112305 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 56 components and 0.112305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086512Jy sigma=0.000782 ! Fit after self-cal, rms=0.086512Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.90 HN 0.98 KP 1.06 ! LA 1.11 MK 1.00* NL 0.94 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 1.06 KP 1.00 ! LA 1.02 MK 1.00* NL 0.98 OV 1.03 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.05 KP 0.87 ! LA 0.84 MK 1.00* NL 1.04 OV 0.93 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.02 KP 0.88 ! LA 0.83 MK 1.00* NL 1.09 OV 1.02 ! PT 1.04 SC 1.00 ! ! ! Fit before self-cal, rms=0.086512Jy sigma=0.000782 ! Fit after self-cal, rms=0.084362Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.886 mas, bmaj=12.01 mas, bpa=13.94 degrees ! Estimated noise=619.857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.07923e-05 Jy ! Component: 100 - total flux cleaned = -2.0371e-05 Jy ! Component: 150 - total flux cleaned = 1.86943e-05 Jy ! Component: 200 - total flux cleaned = 5.30025e-05 Jy ! Total flux subtracted in 200 components = 5.30025e-05 Jy ! Clean residual min=-0.002229 max=0.002578 Jy/beam ! Clean residual mean=0.000003 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.112358 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.112358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084357Jy sigma=0.000776 ! Fit after self-cal, rms=0.084355Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084355Jy sigma=0.000775 ! Fit after self-cal, rms=0.084414Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=12 mas, bpa=13.98 degrees ! Estimated noise=620.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.06934e-05 Jy ! Component: 100 - total flux cleaned = 0.00013574 Jy ! Component: 150 - total flux cleaned = 0.000147681 Jy ! Component: 200 - total flux cleaned = 0.00017005 Jy ! Total flux subtracted in 200 components = 0.00017005 Jy ! Clean residual min=-0.002096 max=0.002467 Jy/beam ! Clean residual mean=0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.112528 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.112528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084410Jy sigma=0.000775 ! Fit after self-cal, rms=0.084414Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238187 Jy ! Component: 100 - total flux cleaned = 0.00333233 Jy ! Component: 150 - total flux cleaned = 0.00367609 Jy ! Component: 200 - total flux cleaned = 0.00394953 Jy ! Total flux subtracted in 200 components = 0.00394953 Jy ! Clean residual min=-0.001882 max=0.002039 Jy/beam ! Clean residual mean=0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.116478 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 125 components and 0.116478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084342Jy sigma=0.000774 ! Fit after self-cal, rms=0.084338Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084338Jy sigma=0.000774 ! Fit after self-cal, rms=0.084089Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=11.99 mas, bpa=14.07 degrees ! Estimated noise=618.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104114 Jy ! Component: 100 - total flux cleaned = 0.00135678 Jy ! Component: 150 - total flux cleaned = 0.00146406 Jy ! Component: 200 - total flux cleaned = 0.0014831 Jy ! Total flux subtracted in 200 components = 0.0014831 Jy ! Clean residual min=-0.001784 max=0.001846 Jy/beam ! Clean residual mean=0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.117961 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 158 components and 0.117961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084072Jy sigma=0.000773 ! Fit after self-cal, rms=0.084072Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277134 Jy ! Component: 100 - total flux cleaned = 0.000312296 Jy ! Component: 150 - total flux cleaned = 0.000328173 Jy ! Component: 200 - total flux cleaned = 0.000342869 Jy ! Total flux subtracted in 200 components = 0.000342869 Jy ! Clean residual min=-0.001776 max=0.001815 Jy/beam ! Clean residual mean=0.000002 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.118304 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 181 components and 0.118304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084067Jy sigma=0.000773 ! Fit after self-cal, rms=0.084067Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084067Jy sigma=0.000773 ! Fit after self-cal, rms=0.083952Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.897 mas, bmaj=15.95 mas, bpa=3.94 degrees ! Estimated noise=720.576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538206 Jy ! Component: 100 - total flux cleaned = 0.000692235 Jy ! Component: 150 - total flux cleaned = 0.000743175 Jy ! Component: 200 - total flux cleaned = 0.000778202 Jy ! Total flux subtracted in 200 components = 0.000778202 Jy ! Clean residual min=-0.001869 max=0.001951 Jy/beam ! Clean residual mean=0.000003 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.119082 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 205 components and 0.119082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083949Jy sigma=0.000773 ! Fit after self-cal, rms=0.083948Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165608 Jy ! Component: 100 - total flux cleaned = 0.00020674 Jy ! Component: 150 - total flux cleaned = 0.00023669 Jy ! Component: 200 - total flux cleaned = 0.000257383 Jy ! Total flux subtracted in 200 components = 0.000257383 Jy ! Clean residual min=-0.001856 max=0.001932 Jy/beam ! Clean residual mean=0.000003 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.119339 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 216 components and 0.119339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083946Jy sigma=0.000773 ! Fit after self-cal, rms=0.083947Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=11.98 mas, bpa=14.09 degrees ! Estimated noise=618.432 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.874 x 11.98 at 14.09 degrees (North through East) ! Clean map min=-0.0017116 max=0.10155 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=10.8 mas, bpa=15.41 degrees ! Estimated noise=888.638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0780604 Jy ! Component: 100 - total flux cleaned = 0.0956485 Jy ! Component: 150 - total flux cleaned = 0.101952 Jy ! Component: 200 - total flux cleaned = 0.105466 Jy ! Total flux subtracted in 200 components = 0.105466 Jy ! Clean residual min=-0.002998 max=0.002926 Jy/beam ! Clean residual mean=0.000001 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.105466 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.105466 Jy ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=11.98 mas, bpa=14.09 degrees ! Estimated noise=618.432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393408 Jy ! Component: 100 - total flux cleaned = 0.006445 Jy ! Component: 150 - total flux cleaned = 0.00828384 Jy ! Component: 200 - total flux cleaned = 0.00948109 Jy ! Total flux subtracted in 200 components = 0.00948109 Jy ! Clean residual min=-0.001930 max=0.002049 Jy/beam ! Clean residual mean=0.000004 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.114947 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 92 components and 0.114947 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.897 mas, bmaj=15.95 mas, bpa=3.94 degrees ! Estimated noise=720.576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157881 Jy ! Component: 100 - total flux cleaned = 0.0022806 Jy ! Component: 150 - total flux cleaned = 0.00280278 Jy ! Component: 200 - total flux cleaned = 0.0031967 Jy ! Total flux subtracted in 200 components = 0.0031967 Jy ! Clean residual min=-0.001990 max=0.001868 Jy/beam ! Clean residual mean=0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.118143 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320105 Jy ! Component: 100 - total flux cleaned = 0.000581444 Jy ! Component: 150 - total flux cleaned = 0.000780836 Jy ! Component: 200 - total flux cleaned = 0.000898131 Jy ! Total flux subtracted in 200 components = 0.000898131 Jy ! Clean residual min=-0.001955 max=0.001895 Jy/beam ! Clean residual mean=0.000003 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.119042 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 182 components and 0.119042 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=11.98 mas, bpa=14.09 degrees ! Estimated noise=618.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.66407e-05 Jy ! Component: 100 - total flux cleaned = 0.000136404 Jy ! Component: 150 - total flux cleaned = 0.000206077 Jy ! Component: 200 - total flux cleaned = 0.000267662 Jy ! Total flux subtracted in 200 components = 0.000267662 Jy ! Clean residual min=-0.001784 max=0.001791 Jy/beam ! Clean residual mean=0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.119309 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 204 components and 0.119309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083948Jy sigma=0.000773 ! Fit after self-cal, rms=0.083948Jy sigma=0.000773 wmodel J0852-1528_S_2014_08_09_pus_map.mod ! Writing 204 model components to file: J0852-1528_S_2014_08_09_pus_map.mod wobs J0852-1528_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0852-1528_S_2014_08_09_pus_uvs.fits wwins J0852-1528_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J0852-1528_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.07923e-05 Jy ! Component: 100 - total flux cleaned = 0.000240494 Jy ! Component: 150 - total flux cleaned = 0.000380065 Jy ! Component: 200 - total flux cleaned = 0.000539891 Jy ! Component: 250 - total flux cleaned = 0.000565051 Jy ! Component: 300 - total flux cleaned = 0.000663369 Jy ! Component: 350 - total flux cleaned = 0.000734796 Jy ! Component: 400 - total flux cleaned = 0.000873051 Jy ! Component: 450 - total flux cleaned = 0.000962395 Jy ! Component: 500 - total flux cleaned = 0.0010712 Jy ! Component: 550 - total flux cleaned = 0.00117668 Jy ! Component: 600 - total flux cleaned = 0.00123795 Jy ! Component: 650 - total flux cleaned = 0.00131867 Jy ! Component: 700 - total flux cleaned = 0.00145666 Jy ! Component: 750 - total flux cleaned = 0.00157153 Jy ! Component: 800 - total flux cleaned = 0.00164652 Jy ! Component: 850 - total flux cleaned = 0.00170177 Jy ! Component: 900 - total flux cleaned = 0.00173798 Jy ! Component: 950 - total flux cleaned = 0.00180911 Jy ! Component: 1000 - total flux cleaned = 0.00187855 Jy ! Component: 1050 - total flux cleaned = 0.00191244 Jy ! Component: 1100 - total flux cleaned = 0.00197967 Jy ! Component: 1150 - total flux cleaned = 0.00201257 Jy ! Component: 1200 - total flux cleaned = 0.00211073 Jy ! Component: 1250 - total flux cleaned = 0.00212671 Jy ! Component: 1300 - total flux cleaned = 0.00225359 Jy ! Component: 1350 - total flux cleaned = 0.00230024 Jy ! Component: 1400 - total flux cleaned = 0.00236185 Jy ! Component: 1450 - total flux cleaned = 0.0024225 Jy ! Component: 1500 - total flux cleaned = 0.00245256 Jy ! Component: 1550 - total flux cleaned = 0.00249718 Jy ! Component: 1600 - total flux cleaned = 0.00254084 Jy ! Component: 1650 - total flux cleaned = 0.0025839 Jy ! Component: 1700 - total flux cleaned = 0.00256963 Jy ! Component: 1750 - total flux cleaned = 0.00261158 Jy ! Component: 1800 - total flux cleaned = 0.00262539 Jy ! Component: 1850 - total flux cleaned = 0.00259803 Jy ! Component: 1900 - total flux cleaned = 0.00265223 Jy ! Component: 1950 - total flux cleaned = 0.00270557 Jy ! Component: 2000 - total flux cleaned = 0.00263974 Jy ! Component: 2050 - total flux cleaned = 0.00260074 Jy ! Component: 2100 - total flux cleaned = 0.00260066 Jy ! Component: 2150 - total flux cleaned = 0.00254948 Jy ! Component: 2200 - total flux cleaned = 0.00257483 Jy ! Component: 2250 - total flux cleaned = 0.00252475 Jy ! Component: 2300 - total flux cleaned = 0.00256186 Jy ! Component: 2350 - total flux cleaned = 0.00254943 Jy ! Component: 2400 - total flux cleaned = 0.00247642 Jy ! Component: 2450 - total flux cleaned = 0.00247647 Jy ! Component: 2500 - total flux cleaned = 0.00241692 Jy ! Component: 2550 - total flux cleaned = 0.0024169 Jy ! Component: 2600 - total flux cleaned = 0.00235856 Jy ! Component: 2650 - total flux cleaned = 0.00238196 Jy ! Component: 2700 - total flux cleaned = 0.002359 Jy ! Component: 2750 - total flux cleaned = 0.00232486 Jy ! Component: 2800 - total flux cleaned = 0.0023476 Jy ! Component: 2850 - total flux cleaned = 0.00232517 Jy ! Component: 2900 - total flux cleaned = 0.00231395 Jy ! Component: 2950 - total flux cleaned = 0.00229195 Jy ! Component: 3000 - total flux cleaned = 0.00225917 Jy ! Component: 3050 - total flux cleaned = 0.00225924 Jy ! Component: 3100 - total flux cleaned = 0.00228075 Jy ! Component: 3150 - total flux cleaned = 0.00226989 Jy ! Component: 3200 - total flux cleaned = 0.00229102 Jy ! Component: 3250 - total flux cleaned = 0.00223828 Jy ! Component: 3300 - total flux cleaned = 0.00226961 Jy ! Component: 3350 - total flux cleaned = 0.00226968 Jy ! Component: 3400 - total flux cleaned = 0.00226975 Jy ! Component: 3450 - total flux cleaned = 0.00225964 Jy ! Component: 3500 - total flux cleaned = 0.00229018 Jy ! Component: 3550 - total flux cleaned = 0.00228008 Jy ! Component: 3600 - total flux cleaned = 0.00228006 Jy ! Component: 3650 - total flux cleaned = 0.00230979 Jy ! Component: 3700 - total flux cleaned = 0.00228014 Jy ! Component: 3750 - total flux cleaned = 0.00231941 Jy ! Component: 3800 - total flux cleaned = 0.00230962 Jy ! Component: 3850 - total flux cleaned = 0.00230962 Jy ! Component: 3900 - total flux cleaned = 0.00230011 Jy ! Component: 3950 - total flux cleaned = 0.00231916 Jy ! Component: 4000 - total flux cleaned = 0.00230971 Jy ! Component: 4050 - total flux cleaned = 0.00230978 Jy ! Total flux subtracted in 4096 components = 0.00230985 Jy ! Clean residual min=-0.000564 max=0.000538 Jy/beam ! Clean residual mean=0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.121619 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 522 components and 0.121619 Jy ![Exited script file: muppet] wmap "J0852-1528_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.874 x 11.98 at 14.09 degrees (North through East) ! Clean map min=-0.0013318 max=0.10167 Jy/beam ! Writing clean map to FITS file: J0852-1528_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101674 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017849 device "J0852-1528_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0852-1528_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.526652 0.526652 1.0533 2.10661 4.21321 8.42643 16.8529 33.7057 67.4114 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.874 x 11.98 at 14.09 degrees (North through East) ! Clean map min=-0.0013318 max=0.10167 Jy/beam quit ! Quitting program ! Log file J0852-1528_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:00:17 2016