! Started logfile: J0847-0703_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:21:51 2017 obs J0847-0703_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0847-0703_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.679259 visibilities/baseline/integration-bin. ! Found source: J0847-0703 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0847-0703_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.763549Jy sigma=0.009462 ! Fit after self-cal, rms=0.710159Jy sigma=0.008910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=5.987 mas, bpa=2.535 degrees ! Estimated noise=958.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224453 Jy ! Component: 100 - total flux cleaned = 0.280746 Jy ! Total flux subtracted in 100 components = 0.280746 Jy ! Clean residual min=-0.014031 max=0.023677 Jy/beam ! Clean residual mean=0.000002 rms=0.004323 Jy/beam ! Combined flux in latest and established models = 0.280746 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.280746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137775Jy sigma=0.001238 ! Fit after self-cal, rms=0.137774Jy sigma=0.001237 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=6.78 mas, bpa=0.244 degrees ! Estimated noise=739.279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023339 Jy ! Component: 100 - total flux cleaned = 0.0323744 Jy ! Component: 150 - total flux cleaned = 0.0339881 Jy ! Component: 200 - total flux cleaned = 0.035137 Jy ! Total flux subtracted in 200 components = 0.035137 Jy ! Clean residual min=-0.013012 max=0.023303 Jy/beam ! Clean residual mean=0.000015 rms=0.005108 Jy/beam ! Combined flux in latest and established models = 0.315883 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.315883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131968Jy sigma=0.001234 ! Fit after self-cal, rms=0.131923Jy sigma=0.001234 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.79 KP 1.00* LA 0.98 ! MK 0.97 NL 1.01 OV 0.92 PT 0.97 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.51 FD 0.93 KP 1.00* LA 0.94 ! MK 0.98 NL 1.09 OV 0.96 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.10 KP 1.00* LA 0.79 ! MK 1.02 NL 1.01 OV 0.88 PT 0.92 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.94 KP 1.00* LA 0.86 ! MK 1.04 NL 1.11 OV 0.95 PT 0.97 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.131923Jy sigma=0.001234 ! Fit after self-cal, rms=0.126527Jy sigma=0.001015 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=6.922 mas, bpa=0.5756 degrees ! Estimated noise=742.806 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727218 Jy ! Component: 100 - total flux cleaned = 0.000330846 Jy ! Component: 150 - total flux cleaned = 0.000120553 Jy ! Component: 200 - total flux cleaned = -0.000158185 Jy ! Total flux subtracted in 200 components = -0.000158185 Jy ! Clean residual min=-0.009559 max=0.010556 Jy/beam ! Clean residual mean=0.000008 rms=0.002413 Jy/beam ! Combined flux in latest and established models = 0.315725 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.315725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126257Jy sigma=0.001012 ! Fit after self-cal, rms=0.126126Jy sigma=0.001010 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126126Jy sigma=0.001010 ! Fit after self-cal, rms=0.124606Jy sigma=0.000926 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=6.896 mas, bpa=0.2833 degrees ! Estimated noise=740.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155802 Jy ! Component: 100 - total flux cleaned = 0.00155309 Jy ! Component: 150 - total flux cleaned = 0.00155289 Jy ! Component: 200 - total flux cleaned = 0.00155178 Jy ! Total flux subtracted in 200 components = 0.00155178 Jy ! Clean residual min=-0.004000 max=0.005043 Jy/beam ! Clean residual mean=0.000002 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.317277 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.317277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124494Jy sigma=0.000925 ! Fit after self-cal, rms=0.124514Jy sigma=0.000924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469006 Jy ! Component: 100 - total flux cleaned = 0.00563945 Jy ! Component: 150 - total flux cleaned = 0.00572164 Jy ! Component: 200 - total flux cleaned = 0.00571841 Jy ! Total flux subtracted in 200 components = 0.00571841 Jy ! Clean residual min=-0.003459 max=0.003608 Jy/beam ! Clean residual mean=0.000004 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.322995 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.322995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124289Jy sigma=0.000921 ! Fit after self-cal, rms=0.124240Jy sigma=0.000921 ! Inverting map ! Added new window around map position (4.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299525 Jy ! Component: 100 - total flux cleaned = 0.00340128 Jy ! Component: 150 - total flux cleaned = 0.00356585 Jy ! Component: 200 - total flux cleaned = 0.00375791 Jy ! Total flux subtracted in 200 components = 0.00375791 Jy ! Clean residual min=-0.003206 max=0.003001 Jy/beam ! Clean residual mean=0.000004 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.326753 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.326753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124132Jy sigma=0.000920 ! Fit after self-cal, rms=0.124132Jy sigma=0.000919 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124132Jy sigma=0.000919 ! Fit after self-cal, rms=0.124499Jy sigma=0.000919 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=6.891 mas, bpa=0.1692 degrees ! Estimated noise=740.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201942 Jy ! Component: 100 - total flux cleaned = 0.00249301 Jy ! Component: 150 - total flux cleaned = 0.00276119 Jy ! Component: 200 - total flux cleaned = 0.0030357 Jy ! Total flux subtracted in 200 components = 0.0030357 Jy ! Clean residual min=-0.003003 max=0.002665 Jy/beam ! Clean residual mean=0.000003 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.329789 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.329789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124437Jy sigma=0.000918 ! Fit after self-cal, rms=0.124449Jy sigma=0.000918 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000462476 Jy ! Component: 100 - total flux cleaned = 0.000427947 Jy ! Component: 150 - total flux cleaned = 0.000398438 Jy ! Component: 200 - total flux cleaned = 0.000369319 Jy ! Total flux subtracted in 200 components = 0.000369319 Jy ! Clean residual min=-0.002879 max=0.002742 Jy/beam ! Clean residual mean=0.000003 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.330158 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 118 components and 0.330158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124424Jy sigma=0.000918 ! Fit after self-cal, rms=0.124425Jy sigma=0.000918 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124425Jy sigma=0.000918 ! Fit after self-cal, rms=0.124608Jy sigma=0.000918 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.552 mas, bmaj=12.75 mas, bpa=11.94 degrees ! Estimated noise=926.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129085 Jy ! Component: 100 - total flux cleaned = 0.00154074 Jy ! Component: 150 - total flux cleaned = 0.00180468 Jy ! Component: 200 - total flux cleaned = 0.00187518 Jy ! Total flux subtracted in 200 components = 0.00187518 Jy ! Clean residual min=-0.002792 max=0.002714 Jy/beam ! Clean residual mean=0.000006 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.332033 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 150 components and 0.332034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124583Jy sigma=0.000917 ! Fit after self-cal, rms=0.124585Jy sigma=0.000917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031056 Jy ! Component: 100 - total flux cleaned = 0.00035206 Jy ! Component: 150 - total flux cleaned = 0.000371237 Jy ! Component: 200 - total flux cleaned = 0.000371042 Jy ! Total flux subtracted in 200 components = 0.000371042 Jy ! Clean residual min=-0.002734 max=0.002767 Jy/beam ! Clean residual mean=0.000006 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.332405 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 157 components and 0.332405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124576Jy sigma=0.000917 ! Fit after self-cal, rms=0.124575Jy sigma=0.000917 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=6.887 mas, bpa=0.1269 degrees ! Estimated noise=741.529 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 6.887 at 0.1269 degrees (North through East) ! Clean map min=-0.0025824 max=0.2866 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=6.069 mas, bpa=2.133 degrees ! Estimated noise=951.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222753 Jy ! Component: 100 - total flux cleaned = 0.280384 Jy ! Component: 150 - total flux cleaned = 0.302801 Jy ! Component: 200 - total flux cleaned = 0.312917 Jy ! Total flux subtracted in 200 components = 0.312917 Jy ! Clean residual min=-0.004690 max=0.005050 Jy/beam ! Clean residual mean=-0.000000 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.312917 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.312917 Jy ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=6.887 mas, bpa=0.1269 degrees ! Estimated noise=741.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0071782 Jy ! Component: 100 - total flux cleaned = 0.0117511 Jy ! Component: 150 - total flux cleaned = 0.0150104 Jy ! Component: 200 - total flux cleaned = 0.0166571 Jy ! Total flux subtracted in 200 components = 0.0166571 Jy ! Clean residual min=-0.003426 max=0.002714 Jy/beam ! Clean residual mean=0.000003 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.329574 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 47 components and 0.329574 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.552 mas, bmaj=12.75 mas, bpa=11.94 degrees ! Estimated noise=926.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170734 Jy ! Component: 100 - total flux cleaned = 0.00219092 Jy ! Component: 150 - total flux cleaned = 0.00259622 Jy ! Component: 200 - total flux cleaned = 0.0027659 Jy ! Total flux subtracted in 200 components = 0.0027659 Jy ! Clean residual min=-0.003022 max=0.002623 Jy/beam ! Clean residual mean=0.000006 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.33234 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194003 Jy ! Component: 100 - total flux cleaned = 0.000319135 Jy ! Component: 150 - total flux cleaned = 0.000462795 Jy ! Component: 200 - total flux cleaned = 0.000587374 Jy ! Total flux subtracted in 200 components = 0.000587374 Jy ! Clean residual min=-0.002769 max=0.002652 Jy/beam ! Clean residual mean=0.000006 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.332927 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 83 components and 0.332927 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=6.887 mas, bpa=0.1269 degrees ! Estimated noise=741.529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287737 Jy ! Component: 100 - total flux cleaned = 0.000201846 Jy ! Component: 150 - total flux cleaned = 0.000273365 Jy ! Component: 200 - total flux cleaned = 0.000306868 Jy ! Total flux subtracted in 200 components = 0.000306868 Jy ! Clean residual min=-0.002861 max=0.002864 Jy/beam ! Clean residual mean=0.000003 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.333234 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.333234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124598Jy sigma=0.000918 ! Fit after self-cal, rms=0.124618Jy sigma=0.000918 wmodel J0847-0703_S_2014_01_04_pus_map.mod ! Writing 98 model components to file: J0847-0703_S_2014_01_04_pus_map.mod wobs J0847-0703_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0847-0703_S_2014_01_04_pus_uvs.fits wwins J0847-0703_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0847-0703_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.01481e-05 Jy ! Component: 100 - total flux cleaned = -9.53672e-05 Jy ! Component: 150 - total flux cleaned = -0.000181366 Jy ! Component: 200 - total flux cleaned = -0.000303153 Jy ! Component: 250 - total flux cleaned = -0.000381692 Jy ! Component: 300 - total flux cleaned = -0.000568764 Jy ! Component: 350 - total flux cleaned = -0.000640149 Jy ! Component: 400 - total flux cleaned = -0.000709131 Jy ! Component: 450 - total flux cleaned = -0.000707989 Jy ! Component: 500 - total flux cleaned = -0.000675484 Jy ! Component: 550 - total flux cleaned = -0.000771674 Jy ! Component: 600 - total flux cleaned = -0.000833051 Jy ! Component: 650 - total flux cleaned = -0.00095471 Jy ! Component: 700 - total flux cleaned = -0.00116327 Jy ! Component: 750 - total flux cleaned = -0.00128035 Jy ! Component: 800 - total flux cleaned = -0.00139501 Jy ! Component: 850 - total flux cleaned = -0.00153577 Jy ! Component: 900 - total flux cleaned = -0.00175605 Jy ! Component: 950 - total flux cleaned = -0.001918 Jy ! Component: 1000 - total flux cleaned = -0.00197066 Jy ! Component: 1050 - total flux cleaned = -0.00217933 Jy ! Component: 1100 - total flux cleaned = -0.00233299 Jy ! Component: 1150 - total flux cleaned = -0.00245938 Jy ! Component: 1200 - total flux cleaned = -0.00258348 Jy ! Component: 1250 - total flux cleaned = -0.00270554 Jy ! Component: 1300 - total flux cleaned = -0.00282604 Jy ! Component: 1350 - total flux cleaned = -0.00294524 Jy ! Component: 1400 - total flux cleaned = -0.00310881 Jy ! Component: 1450 - total flux cleaned = -0.00329216 Jy ! Component: 1500 - total flux cleaned = -0.00335977 Jy ! Component: 1550 - total flux cleaned = -0.00342666 Jy ! Component: 1600 - total flux cleaned = -0.00355855 Jy ! Component: 1650 - total flux cleaned = -0.00362331 Jy ! Component: 1700 - total flux cleaned = -0.00370844 Jy ! Component: 1750 - total flux cleaned = -0.00381376 Jy ! Component: 1800 - total flux cleaned = -0.00389667 Jy ! Component: 1850 - total flux cleaned = -0.00399893 Jy ! Component: 1900 - total flux cleaned = -0.00403959 Jy ! Component: 1950 - total flux cleaned = -0.0041393 Jy ! Component: 2000 - total flux cleaned = -0.00413957 Jy ! Component: 2050 - total flux cleaned = -0.0041976 Jy ! Component: 2100 - total flux cleaned = -0.00425513 Jy ! Component: 2150 - total flux cleaned = -0.00429286 Jy ! Component: 2200 - total flux cleaned = -0.00431169 Jy ! Component: 2250 - total flux cleaned = -0.00438558 Jy ! Component: 2300 - total flux cleaned = -0.00431249 Jy ! Component: 2350 - total flux cleaned = -0.00433064 Jy ! Component: 2400 - total flux cleaned = -0.00422301 Jy ! Component: 2450 - total flux cleaned = -0.00416991 Jy ! Component: 2500 - total flux cleaned = -0.0040645 Jy ! Component: 2550 - total flux cleaned = -0.00392562 Jy ! Component: 2600 - total flux cleaned = -0.00387425 Jy ! Component: 2650 - total flux cleaned = -0.00382311 Jy ! Component: 2700 - total flux cleaned = -0.00375555 Jy ! Component: 2750 - total flux cleaned = -0.00363862 Jy ! Component: 2800 - total flux cleaned = -0.00357238 Jy ! Component: 2850 - total flux cleaned = -0.00345744 Jy ! Component: 2900 - total flux cleaned = -0.00344123 Jy ! Component: 2950 - total flux cleaned = -0.00339278 Jy ! Component: 3000 - total flux cleaned = -0.00326491 Jy ! Component: 3050 - total flux cleaned = -0.00318584 Jy ! Component: 3100 - total flux cleaned = -0.00313868 Jy ! Component: 3150 - total flux cleaned = -0.00299868 Jy ! Component: 3200 - total flux cleaned = -0.00295261 Jy ! Component: 3250 - total flux cleaned = -0.00289144 Jy ! Component: 3300 - total flux cleaned = -0.00281537 Jy ! Component: 3350 - total flux cleaned = -0.00272497 Jy ! Component: 3400 - total flux cleaned = -0.002635 Jy ! Component: 3450 - total flux cleaned = -0.00259035 Jy ! Component: 3500 - total flux cleaned = -0.00253119 Jy ! Component: 3550 - total flux cleaned = -0.00244312 Jy ! Component: 3600 - total flux cleaned = -0.00235574 Jy ! Component: 3650 - total flux cleaned = -0.00234113 Jy ! Component: 3700 - total flux cleaned = -0.00225479 Jy ! Component: 3750 - total flux cleaned = -0.00214056 Jy ! Component: 3800 - total flux cleaned = -0.00205557 Jy ! Component: 3850 - total flux cleaned = -0.00205562 Jy ! Component: 3900 - total flux cleaned = -0.00199967 Jy ! Component: 3950 - total flux cleaned = -0.00195789 Jy ! Component: 4000 - total flux cleaned = -0.00195787 Jy ! Component: 4050 - total flux cleaned = -0.00187543 Jy ! Total flux subtracted in 4096 components = -0.0018754 Jy ! Clean residual min=-0.000993 max=0.001044 Jy/beam ! Clean residual mean=0.000003 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.331359 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 364 components and 0.331359 Jy ![Exited script file: muppet] wmap "J0847-0703_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 6.887 at 0.1269 degrees (North through East) ! Clean map min=-0.00229 max=0.28519 Jy/beam ! Writing clean map to FITS file: J0847-0703_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.285194 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237552 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.249885 0.249885 0.499769 0.999538 1.99908 3.99815 7.9963 15.9926 31.9852 63.9704 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.285 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 6.887 at 0.1269 degrees (North through East) ! Clean map min=-0.00229 max=0.28519 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0847-0703_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:21:55 2017