! Started logfile: J0814-2521_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:48:06 2016 obs J0814-2521_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0814-2521_S_2014_06_09_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77234 visibilities/baseline/integration-bin. ! Found source: J0814-2521 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 13068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0814-2521_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988942Jy sigma=0.008894 ! Fit after self-cal, rms=0.940531Jy sigma=0.008446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.346 mas, bmaj=6.834 mas, bpa=-8.3 degrees ! Estimated noise=1034.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412228 Jy ! Component: 100 - total flux cleaned = 0.0570079 Jy ! Total flux subtracted in 100 components = 0.0570079 Jy ! Clean residual min=-0.005161 max=0.009488 Jy/beam ! Clean residual mean=-0.000011 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.0570079 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0570079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100957Jy sigma=0.000873 ! Fit after self-cal, rms=0.100216Jy sigma=0.000867 ! Inverting map ! Added new window around map position (3, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121565 Jy ! Component: 100 - total flux cleaned = 0.0206049 Jy ! Total flux subtracted in 100 components = 0.0206049 Jy ! Clean residual min=-0.004877 max=0.006992 Jy/beam ! Clean residual mean=-0.000008 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.0776128 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.0776129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097174Jy sigma=0.000834 ! Fit after self-cal, rms=0.096992Jy sigma=0.000833 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=8.181 mas, bpa=-7.224 degrees ! Estimated noise=697.146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146935 Jy ! Component: 100 - total flux cleaned = 0.0233505 Jy ! Component: 150 - total flux cleaned = 0.028711 Jy ! Component: 200 - total flux cleaned = 0.0320606 Jy ! Total flux subtracted in 200 components = 0.0320606 Jy ! Clean residual min=-0.004265 max=0.008609 Jy/beam ! Clean residual mean=-0.000019 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.109673 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 87 components and 0.109673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094783Jy sigma=0.000809 ! Fit after self-cal, rms=0.094501Jy sigma=0.000807 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.09 KP 0.99 ! LA 1.05 MK 0.92 NL 1.11 OV 1.11 ! PT 0.85 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.03 KP 1.00 ! LA 0.99 MK 0.96 NL 1.15 OV 1.23 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.01 KP 0.94 ! LA 0.80 MK 1.06 NL 1.03 OV 1.09 ! PT 0.86 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.09 KP 0.95 ! LA 0.74 MK 0.98 NL 1.13 OV 1.18 ! PT 0.97 SC 0.96 ! ! ! Fit before self-cal, rms=0.094501Jy sigma=0.000807 ! Fit after self-cal, rms=0.092594Jy sigma=0.000800 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=8.173 mas, bpa=-7.17 degrees ! Estimated noise=684.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741935 Jy ! Component: 100 - total flux cleaned = 0.0114381 Jy ! Component: 150 - total flux cleaned = 0.0140822 Jy ! Component: 200 - total flux cleaned = 0.0155082 Jy ! Total flux subtracted in 200 components = 0.0155082 Jy ! Clean residual min=-0.002878 max=0.003755 Jy/beam ! Clean residual mean=0.000009 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.125182 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 137 components and 0.125182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092030Jy sigma=0.000794 ! Fit after self-cal, rms=0.092018Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092018Jy sigma=0.000792 ! Fit after self-cal, rms=0.092836Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.163 mas, bpa=-6.926 degrees ! Estimated noise=685.896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393767 Jy ! Component: 100 - total flux cleaned = 0.00615774 Jy ! Component: 150 - total flux cleaned = 0.00685266 Jy ! Component: 200 - total flux cleaned = 0.00730134 Jy ! Total flux subtracted in 200 components = 0.00730134 Jy ! Clean residual min=-0.002801 max=0.003274 Jy/beam ! Clean residual mean=0.000002 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.132483 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 160 components and 0.132483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092655Jy sigma=0.000788 ! Fit after self-cal, rms=0.092624Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169348 Jy ! Component: 100 - total flux cleaned = 0.00194798 Jy ! Component: 150 - total flux cleaned = 0.00219679 Jy ! Component: 200 - total flux cleaned = 0.00236669 Jy ! Total flux subtracted in 200 components = 0.00236669 Jy ! Clean residual min=-0.002667 max=0.003254 Jy/beam ! Clean residual mean=0.000005 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.13485 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 0.13485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092568Jy sigma=0.000787 ! Fit after self-cal, rms=0.092517Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092517Jy sigma=0.000787 ! Fit after self-cal, rms=0.092895Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=8.152 mas, bpa=-6.584 degrees ! Estimated noise=681.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170165 Jy ! Component: 100 - total flux cleaned = 0.00224247 Jy ! Component: 150 - total flux cleaned = 0.00248498 Jy ! Component: 200 - total flux cleaned = 0.00251412 Jy ! Total flux subtracted in 200 components = 0.00251412 Jy ! Clean residual min=-0.002746 max=0.003319 Jy/beam ! Clean residual mean=-0.000005 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.137364 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 183 components and 0.137364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092851Jy sigma=0.000785 ! Fit after self-cal, rms=0.092865Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (39.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326431 Jy ! Component: 100 - total flux cleaned = 0.00512668 Jy ! Component: 150 - total flux cleaned = 0.0064811 Jy ! Component: 200 - total flux cleaned = 0.00758341 Jy ! Total flux subtracted in 200 components = 0.00758341 Jy ! Clean residual min=-0.002270 max=0.002461 Jy/beam ! Clean residual mean=-0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.144947 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 209 components and 0.144947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092749Jy sigma=0.000784 ! Fit after self-cal, rms=0.092720Jy sigma=0.000784 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092720Jy sigma=0.000784 ! Fit after self-cal, rms=0.092869Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.569 mas, bmaj=20.26 mas, bpa=-3.554 degrees ! Estimated noise=866.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256078 Jy ! Component: 100 - total flux cleaned = 0.00405474 Jy ! Component: 150 - total flux cleaned = 0.00512194 Jy ! Component: 200 - total flux cleaned = 0.00591975 Jy ! Total flux subtracted in 200 components = 0.00591975 Jy ! Clean residual min=-0.002710 max=0.003263 Jy/beam ! Clean residual mean=0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.150867 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 233 components and 0.150867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092839Jy sigma=0.000783 ! Fit after self-cal, rms=0.092851Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110734 Jy ! Component: 100 - total flux cleaned = 0.00185054 Jy ! Component: 150 - total flux cleaned = 0.00204762 Jy ! Component: 200 - total flux cleaned = 0.0021971 Jy ! Total flux subtracted in 200 components = 0.0021971 Jy ! Clean residual min=-0.002801 max=0.003085 Jy/beam ! Clean residual mean=0.000002 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.153064 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 247 components and 0.153064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092842Jy sigma=0.000783 ! Fit after self-cal, rms=0.092842Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.126 mas, bpa=-6.26 degrees ! Estimated noise=677.122 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.873 x 8.126 at -6.26 degrees (North through East) ! Clean map min=-0.0020256 max=0.056758 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=6.755 mas, bpa=-7.247 degrees ! Estimated noise=1015.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0394985 Jy ! Component: 100 - total flux cleaned = 0.0583103 Jy ! Component: 150 - total flux cleaned = 0.0717609 Jy ! Component: 200 - total flux cleaned = 0.0821893 Jy ! Total flux subtracted in 200 components = 0.0821893 Jy ! Clean residual min=-0.004901 max=0.006662 Jy/beam ! Clean residual mean=-0.000010 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.0821894 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0821894 Jy ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.126 mas, bpa=-6.26 degrees ! Estimated noise=677.122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145263 Jy ! Component: 100 - total flux cleaned = 0.0246197 Jy ! Component: 150 - total flux cleaned = 0.0320706 Jy ! Component: 200 - total flux cleaned = 0.0377868 Jy ! Total flux subtracted in 200 components = 0.0377868 Jy ! Clean residual min=-0.003261 max=0.004104 Jy/beam ! Clean residual mean=-0.000017 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.119976 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 78 components and 0.119976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.569 mas, bmaj=20.26 mas, bpa=-3.554 degrees ! Estimated noise=866.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081738 Jy ! Component: 100 - total flux cleaned = 0.0138646 Jy ! Component: 150 - total flux cleaned = 0.018197 Jy ! Component: 200 - total flux cleaned = 0.0215437 Jy ! Total flux subtracted in 200 components = 0.0215437 Jy ! Clean residual min=-0.003103 max=0.003793 Jy/beam ! Clean residual mean=-0.000012 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.14152 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026141 Jy ! Component: 100 - total flux cleaned = 0.00467365 Jy ! Component: 150 - total flux cleaned = 0.00630968 Jy ! Component: 200 - total flux cleaned = 0.00761853 Jy ! Total flux subtracted in 200 components = 0.00761853 Jy ! Clean residual min=-0.002888 max=0.003168 Jy/beam ! Clean residual mean=-0.000002 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.149138 Jy ! Adding 114 model components to the UV plane model. ! The established model now contains 178 components and 0.149138 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.126 mas, bpa=-6.26 degrees ! Estimated noise=677.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285683 Jy ! Component: 100 - total flux cleaned = 0.000637083 Jy ! Component: 150 - total flux cleaned = 0.000996075 Jy ! Component: 200 - total flux cleaned = 0.00126064 Jy ! Total flux subtracted in 200 components = 0.00126064 Jy ! Clean residual min=-0.002306 max=0.002347 Jy/beam ! Clean residual mean=-0.000000 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.150399 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 201 components and 0.150399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092897Jy sigma=0.000783 ! Fit after self-cal, rms=0.092831Jy sigma=0.000783 wmodel J0814-2521_S_2014_06_09_pus_map.mod ! Writing 201 model components to file: J0814-2521_S_2014_06_09_pus_map.mod wobs J0814-2521_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0814-2521_S_2014_06_09_pus_uvs.fits wwins J0814-2521_S_2014_06_09_pus_map.win ! wwins: Wrote 4 windows to J0814-2521_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554029 Jy ! Component: 100 - total flux cleaned = 0.000666968 Jy ! Component: 150 - total flux cleaned = 0.000914875 Jy ! Component: 200 - total flux cleaned = 0.00104959 Jy ! Component: 250 - total flux cleaned = 0.0011133 Jy ! Component: 300 - total flux cleaned = 0.00102122 Jy ! Component: 350 - total flux cleaned = 0.000932131 Jy ! Component: 400 - total flux cleaned = 0.000874719 Jy ! Component: 450 - total flux cleaned = 0.00084648 Jy ! Component: 500 - total flux cleaned = 0.000764479 Jy ! Component: 550 - total flux cleaned = 0.000737725 Jy ! Component: 600 - total flux cleaned = 0.000737988 Jy ! Component: 650 - total flux cleaned = 0.000661985 Jy ! Component: 700 - total flux cleaned = 0.000686871 Jy ! Component: 750 - total flux cleaned = 0.000686612 Jy ! Component: 800 - total flux cleaned = 0.00071024 Jy ! Component: 850 - total flux cleaned = 0.00063991 Jy ! Component: 900 - total flux cleaned = 0.000662692 Jy ! Component: 950 - total flux cleaned = 0.000617249 Jy ! Component: 1000 - total flux cleaned = 0.000617166 Jy ! Component: 1050 - total flux cleaned = 0.000595179 Jy ! Component: 1100 - total flux cleaned = 0.00057385 Jy ! Component: 1150 - total flux cleaned = 0.000573795 Jy ! Component: 1200 - total flux cleaned = 0.00053313 Jy ! Component: 1250 - total flux cleaned = 0.000593399 Jy ! Component: 1300 - total flux cleaned = 0.000533545 Jy ! Component: 1350 - total flux cleaned = 0.000553093 Jy ! Component: 1400 - total flux cleaned = 0.000553011 Jy ! Component: 1450 - total flux cleaned = 0.000534068 Jy ! Component: 1500 - total flux cleaned = 0.000571418 Jy ! Component: 1550 - total flux cleaned = 0.000552787 Jy ! Component: 1600 - total flux cleaned = 0.000552866 Jy ! Component: 1650 - total flux cleaned = 0.000534991 Jy ! Component: 1700 - total flux cleaned = 0.000588238 Jy ! Component: 1750 - total flux cleaned = 0.000553147 Jy ! Component: 1800 - total flux cleaned = 0.000536299 Jy ! Component: 1850 - total flux cleaned = 0.000604899 Jy ! Component: 1900 - total flux cleaned = 0.000621811 Jy ! Component: 1950 - total flux cleaned = 0.000621715 Jy ! Component: 2000 - total flux cleaned = 0.000638402 Jy ! Component: 2050 - total flux cleaned = 0.000670932 Jy ! Component: 2100 - total flux cleaned = 0.000638404 Jy ! Component: 2150 - total flux cleaned = 0.000622303 Jy ! Component: 2200 - total flux cleaned = 0.00065416 Jy ! Component: 2250 - total flux cleaned = 0.000685524 Jy ! Component: 2300 - total flux cleaned = 0.000716507 Jy ! Component: 2350 - total flux cleaned = 0.000746815 Jy ! Component: 2400 - total flux cleaned = 0.000761968 Jy ! Component: 2450 - total flux cleaned = 0.000716887 Jy ! Component: 2500 - total flux cleaned = 0.000776407 Jy ! Component: 2550 - total flux cleaned = 0.000791058 Jy ! Component: 2600 - total flux cleaned = 0.000776296 Jy ! Component: 2650 - total flux cleaned = 0.000703643 Jy ! Component: 2700 - total flux cleaned = 0.000717847 Jy ! Component: 2750 - total flux cleaned = 0.000689343 Jy ! Component: 2800 - total flux cleaned = 0.000647064 Jy ! Component: 2850 - total flux cleaned = 0.000647067 Jy ! Component: 2900 - total flux cleaned = 0.000633065 Jy ! Component: 2950 - total flux cleaned = 0.000591709 Jy ! Component: 3000 - total flux cleaned = 0.000564532 Jy ! Component: 3050 - total flux cleaned = 0.000564536 Jy ! Component: 3100 - total flux cleaned = 0.000591349 Jy ! Component: 3150 - total flux cleaned = 0.000564537 Jy ! Component: 3200 - total flux cleaned = 0.000511725 Jy ! Component: 3250 - total flux cleaned = 0.000538158 Jy ! Component: 3300 - total flux cleaned = 0.000577231 Jy ! Component: 3350 - total flux cleaned = 0.000551382 Jy ! Component: 3400 - total flux cleaned = 0.000602656 Jy ! Component: 3450 - total flux cleaned = 0.000551698 Jy ! Component: 3500 - total flux cleaned = 0.000564396 Jy ! Component: 3550 - total flux cleaned = 0.000526629 Jy ! Component: 3600 - total flux cleaned = 0.000476932 Jy ! Component: 3650 - total flux cleaned = 0.000501835 Jy ! Component: 3700 - total flux cleaned = 0.000489578 Jy ! Component: 3750 - total flux cleaned = 0.000501842 Jy ! Component: 3800 - total flux cleaned = 0.000501859 Jy ! Component: 3850 - total flux cleaned = 0.000513838 Jy ! Component: 3900 - total flux cleaned = 0.000478105 Jy ! Component: 3950 - total flux cleaned = 0.00048994 Jy ! Component: 4000 - total flux cleaned = 0.000501836 Jy ! Component: 4050 - total flux cleaned = 0.000478357 Jy ! Total flux subtracted in 4096 components = 0.000466746 Jy ! Clean residual min=-0.000645 max=0.000670 Jy/beam ! Clean residual mean=0.000002 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.150866 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 496 components and 0.150866 Jy ![Exited script file: muppet] wmap "J0814-2521_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.873 x 8.126 at -6.26 degrees (North through East) ! Clean map min=-0.0013197 max=0.058339 Jy/beam ! Writing clean map to FITS file: J0814-2521_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0583395 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213485 device "J0814-2521_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0814-2521_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09781 1.09781 2.19562 4.39123 8.78246 17.5649 35.1298 70.2597 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.873 x 8.126 at -6.26 degrees (North through East) ! Clean map min=-0.0013197 max=0.058339 Jy/beam quit ! Quitting program ! Log file J0814-2521_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:48:11 2016