! Started logfile: J0805+6144_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:51:41 2016 obs J0805+6144_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0805+6144_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.58963 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0805+6144_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.354546Jy sigma=0.003945 ! Fit after self-cal, rms=0.337098Jy sigma=0.003770 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=16.27 mas, bpa=80.49 degrees ! Estimated noise=2245.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.575308 Jy ! Component: 100 - total flux cleaned = 0.795108 Jy ! Total flux subtracted in 100 components = 0.795108 Jy ! Clean residual min=-0.041501 max=0.095284 Jy/beam ! Clean residual mean=0.000417 rms=0.016801 Jy/beam ! Combined flux in latest and established models = 0.795108 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.795108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227550Jy sigma=0.001885 ! Fit after self-cal, rms=0.227157Jy sigma=0.001881 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=16.04 mas, bpa=80.32 degrees ! Estimated noise=1785.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120413 Jy ! Component: 100 - total flux cleaned = 0.174219 Jy ! Component: 150 - total flux cleaned = 0.204378 Jy ! Component: 200 - total flux cleaned = 0.22389 Jy ! Total flux subtracted in 200 components = 0.22389 Jy ! Clean residual min=-0.035765 max=0.025089 Jy/beam ! Clean residual mean=0.000023 rms=0.008466 Jy/beam ! Combined flux in latest and established models = 1.019 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 89 components and 1.019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136729Jy sigma=0.001207 ! Fit after self-cal, rms=0.136620Jy sigma=0.001205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.85 HN 1.00* KP 1.13 ! LA 0.98 MK 0.95 NL 0.88 OV 1.02 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.88 HN 1.00* KP 1.07 ! LA 0.96 MK 1.02 NL 1.00 OV 1.06 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 1.00* KP 0.96 ! LA 0.80 MK 1.05 NL 1.11 OV 0.96 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.93 HN 1.00* KP 0.94 ! LA 0.85 MK 1.03 NL 1.02 OV 1.00 ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.136620Jy sigma=0.001205 ! Fit after self-cal, rms=0.079553Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=16.14 mas, bpa=80.39 degrees ! Estimated noise=1771.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209511 Jy ! Component: 100 - total flux cleaned = -0.00223097 Jy ! Component: 150 - total flux cleaned = -0.00251651 Jy ! Component: 200 - total flux cleaned = -0.00266898 Jy ! Total flux subtracted in 200 components = -0.00266898 Jy ! Clean residual min=-0.006385 max=0.004851 Jy/beam ! Clean residual mean=0.000013 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 1.01633 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 1.01633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079217Jy sigma=0.000779 ! Fit after self-cal, rms=0.079081Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079081Jy sigma=0.000778 ! Fit after self-cal, rms=0.079090Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=16.14 mas, bpa=80.38 degrees ! Estimated noise=1772.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000581838 Jy ! Component: 100 - total flux cleaned = -0.000865525 Jy ! Component: 150 - total flux cleaned = -0.000983547 Jy ! Component: 200 - total flux cleaned = -0.00103596 Jy ! Total flux subtracted in 200 components = -0.00103596 Jy ! Clean residual min=-0.005851 max=0.004367 Jy/beam ! Clean residual mean=0.000013 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 1.01529 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 1.01529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078982Jy sigma=0.000777 ! Fit after self-cal, rms=0.078980Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002667 Jy ! Component: 100 - total flux cleaned = 0.000359145 Jy ! Component: 150 - total flux cleaned = 0.00044767 Jy ! Component: 200 - total flux cleaned = 0.000529726 Jy ! Total flux subtracted in 200 components = 0.000529726 Jy ! Clean residual min=-0.005838 max=0.004307 Jy/beam ! Clean residual mean=0.000011 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 1.01582 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 1.01582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078936Jy sigma=0.000777 ! Fit after self-cal, rms=0.078936Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078936Jy sigma=0.000777 ! Fit after self-cal, rms=0.078933Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=16.13 mas, bpa=80.37 degrees ! Estimated noise=1772.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00051571 Jy ! Component: 100 - total flux cleaned = -0.000298247 Jy ! Component: 150 - total flux cleaned = -0.000218224 Jy ! Component: 200 - total flux cleaned = -0.000106562 Jy ! Total flux subtracted in 200 components = -0.000106562 Jy ! Clean residual min=-0.005781 max=0.004191 Jy/beam ! Clean residual mean=0.000011 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 1.01572 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 128 components and 1.01572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078886Jy sigma=0.000776 ! Fit after self-cal, rms=0.078885Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.02838e-05 Jy ! Component: 100 - total flux cleaned = 0.00018082 Jy ! Component: 150 - total flux cleaned = 0.000244844 Jy ! Component: 200 - total flux cleaned = 0.000336173 Jy ! Total flux subtracted in 200 components = 0.000336173 Jy ! Clean residual min=-0.005772 max=0.004166 Jy/beam ! Clean residual mean=0.000010 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 1.01605 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 131 components and 1.01605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078862Jy sigma=0.000776 ! Fit after self-cal, rms=0.078862Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078862Jy sigma=0.000776 ! Fit after self-cal, rms=0.078869Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.539 mas, bmaj=17.34 mas, bpa=65.38 degrees ! Estimated noise=2170.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376148 Jy ! Component: 100 - total flux cleaned = 0.000491102 Jy ! Component: 150 - total flux cleaned = 0.000579049 Jy ! Component: 200 - total flux cleaned = 0.00057996 Jy ! Total flux subtracted in 200 components = 0.00057996 Jy ! Clean residual min=-0.005367 max=0.004322 Jy/beam ! Clean residual mean=0.000016 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 1.01663 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 147 components and 1.01663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078850Jy sigma=0.000775 ! Fit after self-cal, rms=0.078849Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.72933e-06 Jy ! Component: 100 - total flux cleaned = -4.81067e-05 Jy ! Component: 150 - total flux cleaned = -1.03957e-05 Jy ! Component: 200 - total flux cleaned = 8.06281e-06 Jy ! Total flux subtracted in 200 components = 8.06281e-06 Jy ! Clean residual min=-0.005282 max=0.004386 Jy/beam ! Clean residual mean=0.000016 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 1.01664 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 157 components and 1.01664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078847Jy sigma=0.000776 ! Fit after self-cal, rms=0.078847Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=16.12 mas, bpa=80.35 degrees ! Estimated noise=1773.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.522 x 16.12 at 80.35 degrees (North through East) ! Clean map min=-0.0054364 max=0.75785 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078847Jy sigma=0.000775 ! Fit after self-cal, rms=0.071757Jy sigma=0.000706 ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=16.12 mas, bpa=80.34 degrees ! Estimated noise=1773.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408358 Jy ! Component: 100 - total flux cleaned = -0.000409941 Jy ! Component: 150 - total flux cleaned = -0.000377827 Jy ! Component: 200 - total flux cleaned = -0.000322044 Jy ! Total flux subtracted in 200 components = -0.000322044 Jy ! Clean residual min=-0.005505 max=0.004201 Jy/beam ! Clean residual mean=0.000011 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 1.01632 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 164 components and 1.01632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071724Jy sigma=0.000705 ! Fit after self-cal, rms=0.071724Jy sigma=0.000705 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.61642e-05 Jy ! Component: 100 - total flux cleaned = 5.56318e-05 Jy ! Component: 150 - total flux cleaned = 0.000122235 Jy ! Component: 200 - total flux cleaned = 0.000184861 Jy ! Total flux subtracted in 200 components = 0.000184861 Jy ! Clean residual min=-0.005485 max=0.004208 Jy/beam ! Clean residual mean=0.000010 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 1.0165 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 166 components and 1.0165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071711Jy sigma=0.000705 ! Fit after self-cal, rms=0.071712Jy sigma=0.000705 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071712Jy sigma=0.000705 ! Fit after self-cal, rms=0.071721Jy sigma=0.000705 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=16.28 mas, bpa=80.48 degrees ! Estimated noise=2246.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.572766 Jy ! Component: 100 - total flux cleaned = 0.786404 Jy ! Component: 150 - total flux cleaned = 0.882386 Jy ! Component: 200 - total flux cleaned = 0.930464 Jy ! Total flux subtracted in 200 components = 0.930464 Jy ! Clean residual min=-0.015329 max=0.023682 Jy/beam ! Clean residual mean=0.000187 rms=0.005229 Jy/beam ! Combined flux in latest and established models = 0.930464 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.930464 Jy ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=16.11 mas, bpa=80.33 degrees ! Estimated noise=1774.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365667 Jy ! Component: 100 - total flux cleaned = 0.0566382 Jy ! Component: 150 - total flux cleaned = 0.0681717 Jy ! Component: 200 - total flux cleaned = 0.0750278 Jy ! Total flux subtracted in 200 components = 0.0750278 Jy ! Clean residual min=-0.006633 max=0.006290 Jy/beam ! Clean residual mean=0.000051 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 1.00549 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 87 components and 1.00549 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.535 mas, bmaj=17.35 mas, bpa=65.3 degrees ! Estimated noise=2167.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602292 Jy ! Component: 100 - total flux cleaned = 0.00732186 Jy ! Component: 150 - total flux cleaned = 0.0081092 Jy ! Component: 200 - total flux cleaned = 0.00874784 Jy ! Total flux subtracted in 200 components = 0.00874784 Jy ! Clean residual min=-0.006225 max=0.003904 Jy/beam ! Clean residual mean=0.000033 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 1.01424 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593347 Jy ! Component: 100 - total flux cleaned = 0.00101816 Jy ! Component: 150 - total flux cleaned = 0.00132627 Jy ! Component: 200 - total flux cleaned = 0.00163045 Jy ! Total flux subtracted in 200 components = 0.00163045 Jy ! Clean residual min=-0.005584 max=0.004222 Jy/beam ! Clean residual mean=0.000024 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 1.01587 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 125 components and 1.01587 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=16.11 mas, bpa=80.33 degrees ! Estimated noise=1774.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000783632 Jy ! Component: 100 - total flux cleaned = -0.000692722 Jy ! Component: 150 - total flux cleaned = -0.000388071 Jy ! Component: 200 - total flux cleaned = -0.00025666 Jy ! Total flux subtracted in 200 components = -0.00025666 Jy ! Clean residual min=-0.005429 max=0.004946 Jy/beam ! Clean residual mean=0.000014 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 1.01561 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 148 components and 1.01561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071853Jy sigma=0.000707 ! Fit after self-cal, rms=0.071836Jy sigma=0.000707 wmodel J0805+6144_S_2015_03_17_pus_map.mod ! Writing 148 model components to file: J0805+6144_S_2015_03_17_pus_map.mod wobs J0805+6144_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0805+6144_S_2015_03_17_pus_uvs.fits wwins J0805+6144_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0805+6144_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125337 Jy ! Component: 100 - total flux cleaned = -0.00258595 Jy ! Component: 150 - total flux cleaned = -0.00387433 Jy ! Component: 200 - total flux cleaned = -0.00457623 Jy ! Component: 250 - total flux cleaned = -0.00510333 Jy ! Component: 300 - total flux cleaned = -0.00541308 Jy ! Component: 350 - total flux cleaned = -0.00547081 Jy ! Component: 400 - total flux cleaned = -0.00552637 Jy ! Component: 450 - total flux cleaned = -0.00557992 Jy ! Component: 500 - total flux cleaned = -0.005682 Jy ! Component: 550 - total flux cleaned = -0.00568329 Jy ! Component: 600 - total flux cleaned = -0.00568425 Jy ! Component: 650 - total flux cleaned = -0.00573176 Jy ! Component: 700 - total flux cleaned = -0.00577665 Jy ! Component: 750 - total flux cleaned = -0.0058188 Jy ! Component: 800 - total flux cleaned = -0.00585993 Jy ! Component: 850 - total flux cleaned = -0.00597681 Jy ! Component: 900 - total flux cleaned = -0.00605231 Jy ! Component: 950 - total flux cleaned = -0.00605197 Jy ! Component: 1000 - total flux cleaned = -0.00587546 Jy ! Component: 1050 - total flux cleaned = -0.00584156 Jy ! Component: 1100 - total flux cleaned = -0.0056744 Jy ! Component: 1150 - total flux cleaned = -0.00567442 Jy ! Component: 1200 - total flux cleaned = -0.00561046 Jy ! Component: 1250 - total flux cleaned = -0.0056408 Jy ! Component: 1300 - total flux cleaned = -0.00582296 Jy ! Component: 1350 - total flux cleaned = -0.00588237 Jy ! Component: 1400 - total flux cleaned = -0.00605898 Jy ! Component: 1450 - total flux cleaned = -0.00620386 Jy ! Component: 1500 - total flux cleaned = -0.00640389 Jy ! Component: 1550 - total flux cleaned = -0.00654436 Jy ! Component: 1600 - total flux cleaned = -0.00676641 Jy ! Component: 1650 - total flux cleaned = -0.00701393 Jy ! Component: 1700 - total flux cleaned = -0.00717761 Jy ! Component: 1750 - total flux cleaned = -0.00742095 Jy ! Component: 1800 - total flux cleaned = -0.00752832 Jy ! Component: 1850 - total flux cleaned = -0.00774166 Jy ! Component: 1900 - total flux cleaned = -0.00776839 Jy ! Component: 1950 - total flux cleaned = -0.00795366 Jy ! Component: 2000 - total flux cleaned = -0.00800639 Jy ! Component: 2050 - total flux cleaned = -0.00816418 Jy ! Component: 2100 - total flux cleaned = -0.00821667 Jy ! Component: 2150 - total flux cleaned = -0.00834749 Jy ! Component: 2200 - total flux cleaned = -0.00850455 Jy ! Component: 2250 - total flux cleaned = -0.00860916 Jy ! Component: 2300 - total flux cleaned = -0.00868801 Jy ! Component: 2350 - total flux cleaned = -0.00884498 Jy ! Component: 2400 - total flux cleaned = -0.00894982 Jy ! Component: 2450 - total flux cleaned = -0.00902855 Jy ! Component: 2500 - total flux cleaned = -0.00910731 Jy ! Component: 2550 - total flux cleaned = -0.00923862 Jy ! Component: 2600 - total flux cleaned = -0.00934386 Jy ! Component: 2650 - total flux cleaned = -0.00944936 Jy ! Component: 2700 - total flux cleaned = -0.00952865 Jy ! Component: 2750 - total flux cleaned = -0.00960809 Jy ! Component: 2800 - total flux cleaned = -0.00971417 Jy ! Component: 2850 - total flux cleaned = -0.00976721 Jy ! Component: 2900 - total flux cleaned = -0.00987395 Jy ! Component: 2950 - total flux cleaned = -0.00998119 Jy ! Component: 3000 - total flux cleaned = -0.0100623 Jy ! Component: 3050 - total flux cleaned = -0.0101708 Jy ! Component: 3100 - total flux cleaned = -0.0102802 Jy ! Component: 3150 - total flux cleaned = -0.0104727 Jy ! Component: 3200 - total flux cleaned = -0.0106114 Jy ! Component: 3250 - total flux cleaned = -0.0108069 Jy ! Component: 3300 - total flux cleaned = -0.0109194 Jy ! Component: 3350 - total flux cleaned = -0.0110332 Jy ! Component: 3400 - total flux cleaned = -0.0111192 Jy ! Component: 3450 - total flux cleaned = -0.0112067 Jy ! Component: 3500 - total flux cleaned = -0.0113537 Jy ! Component: 3550 - total flux cleaned = -0.0114433 Jy ! Component: 3600 - total flux cleaned = -0.0115637 Jy ! Component: 3650 - total flux cleaned = -0.0116853 Jy ! Component: 3700 - total flux cleaned = -0.011747 Jy ! Component: 3750 - total flux cleaned = -0.0119028 Jy ! Component: 3800 - total flux cleaned = -0.0120293 Jy ! Component: 3850 - total flux cleaned = -0.0121572 Jy ! Component: 3900 - total flux cleaned = -0.0122865 Jy ! Component: 3950 - total flux cleaned = -0.012352 Jy ! Component: 4000 - total flux cleaned = -0.0124848 Jy ! Component: 4050 - total flux cleaned = -0.0125861 Jy ! Total flux subtracted in 4096 components = -0.0126884 Jy ! Clean residual min=-0.001964 max=0.001922 Jy/beam ! Clean residual mean=-0.000019 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 1.00293 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 414 components and 1.00293 Jy ![Exited script file: muppet] wmap "J0805+6144_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.529 x 16.11 at 80.33 degrees (North through East) ! Clean map min=-0.0070197 max=0.75885 Jy/beam ! Writing clean map to FITS file: J0805+6144_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.758853 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000575169 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.227384 0.227384 0.454767 0.909534 1.81907 3.63814 7.27627 14.5525 29.1051 58.2102 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.758 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.529 x 16.11 at 80.33 degrees (North through East) ! Clean map min=-0.0070197 max=0.75885 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0805+6144_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:51:47 2016