! Started logfile: J0805+6144_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:17:37 2017 obs J0805+6144_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0805+6144_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.606349 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0805+6144_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.609702Jy sigma=0.003683 ! Fit after self-cal, rms=0.491921Jy sigma=0.002147 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=10.96 mas, bpa=42.08 degrees ! Estimated noise=3898.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.542423 Jy ! Component: 100 - total flux cleaned = 0.725044 Jy ! Total flux subtracted in 100 components = 0.725044 Jy ! Clean residual min=-0.047533 max=0.077734 Jy/beam ! Clean residual mean=0.000241 rms=0.015051 Jy/beam ! Combined flux in latest and established models = 0.725044 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.725044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462672Jy sigma=0.001510 ! Fit after self-cal, rms=0.462514Jy sigma=0.001505 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.065 mas, bmaj=13.84 mas, bpa=35.17 degrees ! Estimated noise=2754.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120654 Jy ! Component: 100 - total flux cleaned = 0.170868 Jy ! Component: 150 - total flux cleaned = 0.196226 Jy ! Component: 200 - total flux cleaned = 0.210955 Jy ! Total flux subtracted in 200 components = 0.210955 Jy ! Clean residual min=-0.026485 max=0.022964 Jy/beam ! Clean residual mean=-0.000106 rms=0.006957 Jy/beam ! Combined flux in latest and established models = 0.935998 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 61 components and 0.935998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431150Jy sigma=0.001030 ! Fit after self-cal, rms=0.431140Jy sigma=0.001029 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00 KP 1.13 ! LA 1.01 MK 0.97 NL 0.98 OV 1.01 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 1.05 KP 1.04 ! LA 0.99 MK 0.97 NL 0.93 OV 1.04 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.54 HN 1.03 KP 0.90 ! LA 0.79 MK 1.00 NL 1.08 OV 0.97 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.81 HN 1.00 KP 0.83 ! LA 0.85 MK 1.07 NL 1.08 OV 0.92 ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.431140Jy sigma=0.001029 ! Fit after self-cal, rms=0.427081Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=13.87 mas, bpa=35.23 degrees ! Estimated noise=2738.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777808 Jy ! Component: 100 - total flux cleaned = 0.000859771 Jy ! Component: 150 - total flux cleaned = 0.00135587 Jy ! Component: 200 - total flux cleaned = 0.00172725 Jy ! Total flux subtracted in 200 components = 0.00172725 Jy ! Clean residual min=-0.010640 max=0.011322 Jy/beam ! Clean residual mean=0.000011 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.937726 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.937726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426956Jy sigma=0.000765 ! Fit after self-cal, rms=0.426776Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426776Jy sigma=0.000764 ! Fit after self-cal, rms=0.425625Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=13.86 mas, bpa=35.36 degrees ! Estimated noise=2738.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20594e-05 Jy ! Component: 100 - total flux cleaned = 0.000506156 Jy ! Component: 150 - total flux cleaned = 0.00107534 Jy ! Component: 200 - total flux cleaned = 0.00152028 Jy ! Total flux subtracted in 200 components = 0.00152028 Jy ! Clean residual min=-0.009829 max=0.010666 Jy/beam ! Clean residual mean=0.000014 rms=0.002448 Jy/beam ! Combined flux in latest and established models = 0.939246 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.939246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.425558Jy sigma=0.000762 ! Fit after self-cal, rms=0.425569Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-97.5, -125). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540612 Jy ! Component: 100 - total flux cleaned = 0.00348223 Jy ! Component: 150 - total flux cleaned = 0.00241661 Jy ! Component: 200 - total flux cleaned = 0.00172069 Jy ! Total flux subtracted in 200 components = 0.00172069 Jy ! Clean residual min=-0.010115 max=0.008227 Jy/beam ! Clean residual mean=0.000017 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.940967 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.940967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.425022Jy sigma=0.000758 ! Fit after self-cal, rms=0.424996Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424996Jy sigma=0.000758 ! Fit after self-cal, rms=0.424401Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=13.86 mas, bpa=35.45 degrees ! Estimated noise=2737.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00073354 Jy ! Component: 100 - total flux cleaned = -0.00113727 Jy ! Component: 150 - total flux cleaned = -0.00128242 Jy ! Component: 200 - total flux cleaned = -0.00142046 Jy ! Total flux subtracted in 200 components = -0.00142046 Jy ! Clean residual min=-0.010000 max=0.007742 Jy/beam ! Clean residual mean=0.000015 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.939546 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 133 components and 0.939546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424319Jy sigma=0.000757 ! Fit after self-cal, rms=0.424327Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164808 Jy ! Component: 100 - total flux cleaned = -0.000348192 Jy ! Component: 150 - total flux cleaned = -0.000459791 Jy ! Component: 200 - total flux cleaned = -0.000458583 Jy ! Total flux subtracted in 200 components = -0.000458583 Jy ! Clean residual min=-0.009912 max=0.007634 Jy/beam ! Clean residual mean=0.000013 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.939088 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.939087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424276Jy sigma=0.000757 ! Fit after self-cal, rms=0.424285Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424285Jy sigma=0.000757 ! Fit after self-cal, rms=0.424369Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.129 mas, bmaj=23.98 mas, bpa=27.38 degrees ! Estimated noise=3256.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012254 Jy ! Component: 100 - total flux cleaned = 0.00100403 Jy ! Component: 150 - total flux cleaned = 0.000810862 Jy ! Component: 200 - total flux cleaned = 0.000637182 Jy ! Total flux subtracted in 200 components = 0.000637182 Jy ! Clean residual min=-0.009652 max=0.007374 Jy/beam ! Clean residual mean=0.000015 rms=0.002303 Jy/beam ! Combined flux in latest and established models = 0.939725 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 153 components and 0.939725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424329Jy sigma=0.000757 ! Fit after self-cal, rms=0.424325Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149069 Jy ! Component: 100 - total flux cleaned = -6.67337e-05 Jy ! Component: 150 - total flux cleaned = -2.77894e-05 Jy ! Component: 200 - total flux cleaned = -0.000101166 Jy ! Total flux subtracted in 200 components = -0.000101166 Jy ! Clean residual min=-0.009709 max=0.007460 Jy/beam ! Clean residual mean=0.000014 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 0.939623 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 164 components and 0.939624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424293Jy sigma=0.000757 ! Fit after self-cal, rms=0.424294Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=13.86 mas, bpa=35.47 degrees ! Estimated noise=2739.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.092 x 13.86 at 35.47 degrees (North through East) ! Clean map min=-0.0096722 max=0.77558 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424294Jy sigma=0.000757 ! Fit after self-cal, rms=0.444336Jy sigma=0.000695 ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=13.86 mas, bpa=35.52 degrees ! Estimated noise=2738.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000700975 Jy ! Component: 100 - total flux cleaned = -0.000232511 Jy ! Component: 150 - total flux cleaned = -0.000177925 Jy ! Component: 200 - total flux cleaned = -0.000320752 Jy ! Total flux subtracted in 200 components = -0.000320752 Jy ! Clean residual min=-0.009799 max=0.007402 Jy/beam ! Clean residual mean=0.000009 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 0.939303 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 177 components and 0.939303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444274Jy sigma=0.000694 ! Fit after self-cal, rms=0.444284Jy sigma=0.000694 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.65316e-05 Jy ! Component: 100 - total flux cleaned = -0.000142942 Jy ! Component: 150 - total flux cleaned = -0.000187121 Jy ! Component: 200 - total flux cleaned = -0.000187567 Jy ! Total flux subtracted in 200 components = -0.000187567 Jy ! Clean residual min=-0.009775 max=0.007369 Jy/beam ! Clean residual mean=0.000008 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 0.939115 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 186 components and 0.939115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444245Jy sigma=0.000694 ! Fit after self-cal, rms=0.444254Jy sigma=0.000694 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444254Jy sigma=0.000694 ! Fit after self-cal, rms=0.443898Jy sigma=0.000694 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=10.96 mas, bpa=42.31 degrees ! Estimated noise=3884.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.541574 Jy ! Component: 100 - total flux cleaned = 0.725071 Jy ! Component: 150 - total flux cleaned = 0.808451 Jy ! Component: 200 - total flux cleaned = 0.852529 Jy ! Total flux subtracted in 200 components = 0.852529 Jy ! Clean residual min=-0.017983 max=0.023292 Jy/beam ! Clean residual mean=0.000117 rms=0.005926 Jy/beam ! Combined flux in latest and established models = 0.85253 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.85253 Jy ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=13.86 mas, bpa=35.53 degrees ! Estimated noise=2740.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391524 Jy ! Component: 100 - total flux cleaned = 0.0581973 Jy ! Component: 150 - total flux cleaned = 0.067938 Jy ! Component: 200 - total flux cleaned = 0.0728559 Jy ! Total flux subtracted in 200 components = 0.0728559 Jy ! Clean residual min=-0.010355 max=0.010468 Jy/beam ! Clean residual mean=0.000029 rms=0.002512 Jy/beam ! Combined flux in latest and established models = 0.925386 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 76 components and 0.925386 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.133 mas, bmaj=23.98 mas, bpa=27.4 degrees ! Estimated noise=3256.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0071629 Jy ! Component: 100 - total flux cleaned = 0.00964053 Jy ! Component: 150 - total flux cleaned = 0.011883 Jy ! Component: 200 - total flux cleaned = 0.0131502 Jy ! Total flux subtracted in 200 components = 0.0131502 Jy ! Clean residual min=-0.009832 max=0.007765 Jy/beam ! Clean residual mean=0.000023 rms=0.002271 Jy/beam ! Combined flux in latest and established models = 0.938536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269536 Jy ! Component: 100 - total flux cleaned = 0.000500966 Jy ! Component: 150 - total flux cleaned = 0.000708185 Jy ! Component: 200 - total flux cleaned = 0.000886259 Jy ! Total flux subtracted in 200 components = 0.000886259 Jy ! Clean residual min=-0.009747 max=0.007474 Jy/beam ! Clean residual mean=0.000015 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 0.939422 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 109 components and 0.939422 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=13.86 mas, bpa=35.53 degrees ! Estimated noise=2740.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211004 Jy ! Component: 100 - total flux cleaned = -0.000434406 Jy ! Component: 150 - total flux cleaned = -0.00103386 Jy ! Component: 200 - total flux cleaned = -0.00130197 Jy ! Total flux subtracted in 200 components = -0.00130197 Jy ! Clean residual min=-0.009271 max=0.007621 Jy/beam ! Clean residual mean=0.000011 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.93812 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 125 components and 0.93812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444055Jy sigma=0.000696 ! Fit after self-cal, rms=0.444100Jy sigma=0.000695 wmodel J0805+6144_S_2015_01_23_pus_map.mod ! Writing 125 model components to file: J0805+6144_S_2015_01_23_pus_map.mod wobs J0805+6144_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0805+6144_S_2015_01_23_pus_uvs.fits wwins J0805+6144_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0805+6144_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113719 Jy ! Component: 100 - total flux cleaned = 0.000614589 Jy ! Component: 150 - total flux cleaned = 0.00211318 Jy ! Component: 200 - total flux cleaned = 0.00361612 Jy ! Component: 250 - total flux cleaned = 0.00482668 Jy ! Component: 300 - total flux cleaned = 0.0055865 Jy ! Component: 350 - total flux cleaned = 0.00613159 Jy ! Component: 400 - total flux cleaned = 0.00674994 Jy ! Component: 450 - total flux cleaned = 0.00734686 Jy ! Component: 500 - total flux cleaned = 0.00759438 Jy ! Component: 550 - total flux cleaned = 0.00783582 Jy ! Component: 600 - total flux cleaned = 0.00783472 Jy ! Component: 650 - total flux cleaned = 0.00775686 Jy ! Component: 700 - total flux cleaned = 0.0076062 Jy ! Component: 750 - total flux cleaned = 0.00745886 Jy ! Component: 800 - total flux cleaned = 0.00767629 Jy ! Component: 850 - total flux cleaned = 0.00774777 Jy ! Component: 900 - total flux cleaned = 0.00795951 Jy ! Component: 950 - total flux cleaned = 0.00795966 Jy ! Component: 1000 - total flux cleaned = 0.00816552 Jy ! Component: 1050 - total flux cleaned = 0.00830066 Jy ! Component: 1100 - total flux cleaned = 0.00843456 Jy ! Component: 1150 - total flux cleaned = 0.00836756 Jy ! Component: 1200 - total flux cleaned = 0.00836773 Jy ! Component: 1250 - total flux cleaned = 0.00836815 Jy ! Component: 1300 - total flux cleaned = 0.00823992 Jy ! Component: 1350 - total flux cleaned = 0.00811328 Jy ! Component: 1400 - total flux cleaned = 0.00805052 Jy ! Component: 1450 - total flux cleaned = 0.00798804 Jy ! Component: 1500 - total flux cleaned = 0.00798786 Jy ! Component: 1550 - total flux cleaned = 0.00792673 Jy ! Component: 1600 - total flux cleaned = 0.00780553 Jy ! Component: 1650 - total flux cleaned = 0.00774592 Jy ! Component: 1700 - total flux cleaned = 0.00774594 Jy ! Component: 1750 - total flux cleaned = 0.00762708 Jy ! Component: 1800 - total flux cleaned = 0.00756836 Jy ! Component: 1850 - total flux cleaned = 0.00745111 Jy ! Component: 1900 - total flux cleaned = 0.00750943 Jy ! Component: 1950 - total flux cleaned = 0.00745122 Jy ! Component: 2000 - total flux cleaned = 0.00733514 Jy ! Component: 2050 - total flux cleaned = 0.00716181 Jy ! Component: 2100 - total flux cleaned = 0.00704666 Jy ! Component: 2150 - total flux cleaned = 0.00698939 Jy ! Component: 2200 - total flux cleaned = 0.00676097 Jy ! Component: 2250 - total flux cleaned = 0.00670437 Jy ! Component: 2300 - total flux cleaned = 0.0064204 Jy ! Component: 2350 - total flux cleaned = 0.00613698 Jy ! Component: 2400 - total flux cleaned = 0.00591136 Jy ! Component: 2450 - total flux cleaned = 0.00557232 Jy ! Component: 2500 - total flux cleaned = 0.00540316 Jy ! Component: 2550 - total flux cleaned = 0.00500837 Jy ! Component: 2600 - total flux cleaned = 0.00467019 Jy ! Component: 2650 - total flux cleaned = 0.00427607 Jy ! Component: 2700 - total flux cleaned = 0.00399456 Jy ! Component: 2750 - total flux cleaned = 0.00365708 Jy ! Component: 2800 - total flux cleaned = 0.00331955 Jy ! Component: 2850 - total flux cleaned = 0.0032637 Jy ! Component: 2900 - total flux cleaned = 0.00292582 Jy ! Component: 2950 - total flux cleaned = 0.00286931 Jy ! Component: 3000 - total flux cleaned = 0.0026995 Jy ! Component: 3050 - total flux cleaned = 0.00258631 Jy ! Component: 3100 - total flux cleaned = 0.00247262 Jy ! Component: 3150 - total flux cleaned = 0.00235909 Jy ! Component: 3200 - total flux cleaned = 0.00213156 Jy ! Component: 3250 - total flux cleaned = 0.00201749 Jy ! Component: 3300 - total flux cleaned = 0.00184631 Jy ! Component: 3350 - total flux cleaned = 0.00173123 Jy ! Component: 3400 - total flux cleaned = 0.00155869 Jy ! Component: 3450 - total flux cleaned = 0.00144379 Jy ! Component: 3500 - total flux cleaned = 0.00127085 Jy ! Component: 3550 - total flux cleaned = 0.0010393 Jy ! Component: 3600 - total flux cleaned = 0.000864888 Jy ! Component: 3650 - total flux cleaned = 0.000748129 Jy ! Component: 3700 - total flux cleaned = 0.000513953 Jy ! Component: 3750 - total flux cleaned = 0.000396399 Jy ! Component: 3800 - total flux cleaned = 4.31042e-05 Jy ! Component: 3850 - total flux cleaned = -7.53533e-05 Jy ! Component: 3900 - total flux cleaned = -0.00031265 Jy ! Component: 3950 - total flux cleaned = -0.000491269 Jy ! Component: 4000 - total flux cleaned = -0.000611231 Jy ! Component: 4050 - total flux cleaned = -0.000851535 Jy ! Total flux subtracted in 4096 components = -0.00103245 Jy ! Clean residual min=-0.003401 max=0.003153 Jy/beam ! Clean residual mean=-0.000010 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.937088 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 347 components and 0.937088 Jy ![Exited script file: muppet] wmap "J0805+6144_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.09 x 13.86 at 35.53 degrees (North through East) ! Clean map min=-0.0066811 max=0.77809 Jy/beam ! Writing clean map to FITS file: J0805+6144_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.77809 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110553 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.426249 0.426249 0.852498 1.705 3.40999 6.81999 13.64 27.28 54.5599 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.778 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.09 x 13.86 at 35.53 degrees (North through East) ! Clean map min=-0.0066811 max=0.77809 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0805+6144_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:17:43 2017