! Started logfile: J0805+6144_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:49:23 2017 obs J0805+6144_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J0805+6144_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0805+6144_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.386946Jy sigma=0.003947 ! Fit after self-cal, rms=0.377531Jy sigma=0.003851 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=10.31 mas, bpa=71.89 degrees ! Estimated noise=2185.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.504035 Jy ! Component: 100 - total flux cleaned = 0.683988 Jy ! Total flux subtracted in 100 components = 0.683988 Jy ! Clean residual min=-0.038480 max=0.080977 Jy/beam ! Clean residual mean=0.000363 rms=0.014996 Jy/beam ! Combined flux in latest and established models = 0.683988 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.683988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208599Jy sigma=0.001831 ! Fit after self-cal, rms=0.208155Jy sigma=0.001826 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=11.16 mas, bpa=70.95 degrees ! Estimated noise=1701.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11478 Jy ! Component: 100 - total flux cleaned = 0.16773 Jy ! Component: 150 - total flux cleaned = 0.19515 Jy ! Component: 200 - total flux cleaned = 0.210457 Jy ! Total flux subtracted in 200 components = 0.210457 Jy ! Clean residual min=-0.020776 max=0.021362 Jy/beam ! Clean residual mean=0.000028 rms=0.005324 Jy/beam ! Combined flux in latest and established models = 0.894445 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 48 components and 0.894445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128170Jy sigma=0.001130 ! Fit after self-cal, rms=0.127899Jy sigma=0.001127 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.99 KP 1.10 ! LA 1.02 MK 1.02 NL 1.00 OV 0.97 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.04 KP 1.01 ! LA 1.01 MK 0.98 NL 0.82 OV 1.01 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.06 KP 0.88 ! LA 0.80 MK 1.04 NL 1.09 OV 0.94 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.01 KP 0.82 ! LA 0.89 MK 1.01 NL 1.06 OV 1.03 ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.127899Jy sigma=0.001127 ! Fit after self-cal, rms=0.082325Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=11.18 mas, bpa=71.01 degrees ! Estimated noise=1690.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754965 Jy ! Component: 100 - total flux cleaned = 0.0112729 Jy ! Component: 150 - total flux cleaned = 0.0132491 Jy ! Component: 200 - total flux cleaned = 0.0143413 Jy ! Total flux subtracted in 200 components = 0.0143413 Jy ! Clean residual min=-0.003940 max=0.004155 Jy/beam ! Clean residual mean=0.000021 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.908787 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 76 components and 0.908787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081577Jy sigma=0.000785 ! Fit after self-cal, rms=0.081518Jy sigma=0.000784 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081518Jy sigma=0.000784 ! Fit after self-cal, rms=0.081419Jy sigma=0.000784 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=11.18 mas, bpa=71.02 degrees ! Estimated noise=1688.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818944 Jy ! Component: 100 - total flux cleaned = 0.00116497 Jy ! Component: 150 - total flux cleaned = 0.00152625 Jy ! Component: 200 - total flux cleaned = 0.00184304 Jy ! Total flux subtracted in 200 components = 0.00184304 Jy ! Clean residual min=-0.003868 max=0.003829 Jy/beam ! Clean residual mean=0.000016 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.91063 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.91063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081328Jy sigma=0.000783 ! Fit after self-cal, rms=0.081325Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312722 Jy ! Component: 100 - total flux cleaned = 0.00049041 Jy ! Component: 150 - total flux cleaned = 0.00061006 Jy ! Component: 200 - total flux cleaned = 0.000719682 Jy ! Total flux subtracted in 200 components = 0.000719682 Jy ! Clean residual min=-0.003804 max=0.003594 Jy/beam ! Clean residual mean=0.000016 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.91135 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.91135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081287Jy sigma=0.000783 ! Fit after self-cal, rms=0.081284Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081284Jy sigma=0.000783 ! Fit after self-cal, rms=0.081237Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=11.18 mas, bpa=71.04 degrees ! Estimated noise=1686.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.868e-05 Jy ! Component: 100 - total flux cleaned = 0.000147396 Jy ! Component: 150 - total flux cleaned = 0.000210682 Jy ! Component: 200 - total flux cleaned = 0.000240013 Jy ! Total flux subtracted in 200 components = 0.000240013 Jy ! Clean residual min=-0.003729 max=0.003460 Jy/beam ! Clean residual mean=0.000014 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.91159 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.91159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081211Jy sigma=0.000783 ! Fit after self-cal, rms=0.081210Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.76542e-05 Jy ! Component: 100 - total flux cleaned = 6.56782e-05 Jy ! Component: 150 - total flux cleaned = 0.000145996 Jy ! Component: 200 - total flux cleaned = 0.000248703 Jy ! Total flux subtracted in 200 components = 0.000248703 Jy ! Clean residual min=-0.003681 max=0.003362 Jy/beam ! Clean residual mean=0.000014 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.911838 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 0.911838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081194Jy sigma=0.000783 ! Fit after self-cal, rms=0.081193Jy sigma=0.000783 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081193Jy sigma=0.000783 ! Fit after self-cal, rms=0.081160Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.533 mas, bmaj=16.69 mas, bpa=56.29 degrees ! Estimated noise=2136.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159469 Jy ! Component: 100 - total flux cleaned = 0.000243002 Jy ! Component: 150 - total flux cleaned = 0.00027801 Jy ! Component: 200 - total flux cleaned = 0.000309055 Jy ! Total flux subtracted in 200 components = 0.000309055 Jy ! Clean residual min=-0.004497 max=0.003894 Jy/beam ! Clean residual mean=0.000026 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.912147 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 138 components and 0.912147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081148Jy sigma=0.000782 ! Fit after self-cal, rms=0.081145Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.82946e-05 Jy ! Component: 100 - total flux cleaned = -8.48373e-07 Jy ! Component: 150 - total flux cleaned = 0.000104501 Jy ! Component: 200 - total flux cleaned = 0.000230353 Jy ! Total flux subtracted in 200 components = 0.000230353 Jy ! Clean residual min=-0.004288 max=0.003813 Jy/beam ! Clean residual mean=0.000027 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.912378 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 144 components and 0.912378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081138Jy sigma=0.000782 ! Fit after self-cal, rms=0.081137Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=11.18 mas, bpa=71.05 degrees ! Estimated noise=1686.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.145 x 11.18 at 71.05 degrees (North through East) ! Clean map min=-0.0034658 max=0.68176 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081137Jy sigma=0.000782 ! Fit after self-cal, rms=0.071329Jy sigma=0.000683 ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=11.19 mas, bpa=71.04 degrees ! Estimated noise=1686.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157534 Jy ! Component: 100 - total flux cleaned = -0.000158035 Jy ! Component: 150 - total flux cleaned = -0.000106096 Jy ! Component: 200 - total flux cleaned = -5.64198e-05 Jy ! Total flux subtracted in 200 components = -5.64198e-05 Jy ! Clean residual min=-0.003527 max=0.003360 Jy/beam ! Clean residual mean=0.000013 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.912321 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 153 components and 0.912322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071309Jy sigma=0.000683 ! Fit after self-cal, rms=0.071309Jy sigma=0.000683 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.35811e-05 Jy ! Component: 100 - total flux cleaned = 6.04799e-05 Jy ! Component: 150 - total flux cleaned = 5.99289e-05 Jy ! Component: 200 - total flux cleaned = 0.000104202 Jy ! Total flux subtracted in 200 components = 0.000104202 Jy ! Clean residual min=-0.003474 max=0.003347 Jy/beam ! Clean residual mean=0.000012 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.912426 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 161 components and 0.912426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071296Jy sigma=0.000682 ! Fit after self-cal, rms=0.071296Jy sigma=0.000682 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071296Jy sigma=0.000682 ! Fit after self-cal, rms=0.071272Jy sigma=0.000682 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=10.35 mas, bpa=72 degrees ! Estimated noise=2199.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.506371 Jy ! Component: 100 - total flux cleaned = 0.684409 Jy ! Component: 150 - total flux cleaned = 0.772068 Jy ! Component: 200 - total flux cleaned = 0.819318 Jy ! Total flux subtracted in 200 components = 0.819318 Jy ! Clean residual min=-0.014034 max=0.023169 Jy/beam ! Clean residual mean=0.000132 rms=0.004856 Jy/beam ! Combined flux in latest and established models = 0.819318 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.819318 Jy ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=11.19 mas, bpa=71.05 degrees ! Estimated noise=1686.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342601 Jy ! Component: 100 - total flux cleaned = 0.0526049 Jy ! Component: 150 - total flux cleaned = 0.0629261 Jy ! Component: 200 - total flux cleaned = 0.069732 Jy ! Total flux subtracted in 200 components = 0.069732 Jy ! Clean residual min=-0.004785 max=0.004558 Jy/beam ! Clean residual mean=0.000041 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.88905 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.88905 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.534 mas, bmaj=16.69 mas, bpa=56.29 degrees ! Estimated noise=2135.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646684 Jy ! Component: 100 - total flux cleaned = 0.010725 Jy ! Component: 150 - total flux cleaned = 0.0138339 Jy ! Component: 200 - total flux cleaned = 0.0161452 Jy ! Total flux subtracted in 200 components = 0.0161452 Jy ! Clean residual min=-0.005157 max=0.004041 Jy/beam ! Clean residual mean=0.000044 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.905195 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168225 Jy ! Component: 100 - total flux cleaned = 0.002375 Jy ! Component: 150 - total flux cleaned = 0.00294546 Jy ! Component: 200 - total flux cleaned = 0.0034654 Jy ! Total flux subtracted in 200 components = 0.0034654 Jy ! Clean residual min=-0.004609 max=0.003973 Jy/beam ! Clean residual mean=0.000036 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.908661 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 111 components and 0.908661 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=11.19 mas, bpa=71.05 degrees ! Estimated noise=1686.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698265 Jy ! Component: 100 - total flux cleaned = 0.00139079 Jy ! Component: 150 - total flux cleaned = 0.00160883 Jy ! Component: 200 - total flux cleaned = 0.00180653 Jy ! Total flux subtracted in 200 components = 0.00180653 Jy ! Clean residual min=-0.003869 max=0.003587 Jy/beam ! Clean residual mean=0.000017 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.910467 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.910467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071389Jy sigma=0.000684 ! Fit after self-cal, rms=0.071385Jy sigma=0.000684 wmodel J0805+6144_S_2015_01_22_pus_map.mod ! Writing 133 model components to file: J0805+6144_S_2015_01_22_pus_map.mod wobs J0805+6144_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J0805+6144_S_2015_01_22_pus_uvs.fits wwins J0805+6144_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J0805+6144_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000418109 Jy ! Component: 100 - total flux cleaned = -0.000655953 Jy ! Component: 150 - total flux cleaned = -0.000936356 Jy ! Component: 200 - total flux cleaned = -0.00109261 Jy ! Component: 250 - total flux cleaned = -0.00104095 Jy ! Component: 300 - total flux cleaned = -0.00103974 Jy ! Component: 350 - total flux cleaned = -0.00104 Jy ! Component: 400 - total flux cleaned = -0.00108366 Jy ! Component: 450 - total flux cleaned = -0.00116646 Jy ! Component: 500 - total flux cleaned = -0.00120599 Jy ! Component: 550 - total flux cleaned = -0.0013203 Jy ! Component: 600 - total flux cleaned = -0.00131945 Jy ! Component: 650 - total flux cleaned = -0.00139096 Jy ! Component: 700 - total flux cleaned = -0.00142557 Jy ! Component: 750 - total flux cleaned = -0.00145804 Jy ! Component: 800 - total flux cleaned = -0.00135934 Jy ! Component: 850 - total flux cleaned = -0.00139133 Jy ! Component: 900 - total flux cleaned = -0.00142277 Jy ! Component: 950 - total flux cleaned = -0.00139239 Jy ! Component: 1000 - total flux cleaned = -0.00151223 Jy ! Component: 1050 - total flux cleaned = -0.00145338 Jy ! Component: 1100 - total flux cleaned = -0.00136717 Jy ! Component: 1150 - total flux cleaned = -0.00128219 Jy ! Component: 1200 - total flux cleaned = -0.00122614 Jy ! Component: 1250 - total flux cleaned = -0.00106212 Jy ! Component: 1300 - total flux cleaned = -0.000982376 Jy ! Component: 1350 - total flux cleaned = -0.000851443 Jy ! Component: 1400 - total flux cleaned = -0.000774263 Jy ! Component: 1450 - total flux cleaned = -0.000672826 Jy ! Component: 1500 - total flux cleaned = -0.000597912 Jy ! Component: 1550 - total flux cleaned = -0.000475037 Jy ! Component: 1600 - total flux cleaned = -0.000450956 Jy ! Component: 1650 - total flux cleaned = -0.000451375 Jy ! Component: 1700 - total flux cleaned = -0.000522253 Jy ! Component: 1750 - total flux cleaned = -0.00056837 Jy ! Component: 1800 - total flux cleaned = -0.00052255 Jy ! Component: 1850 - total flux cleaned = -0.000454678 Jy ! Component: 1900 - total flux cleaned = -0.000521816 Jy ! Component: 1950 - total flux cleaned = -0.000499792 Jy ! Component: 2000 - total flux cleaned = -0.000587425 Jy ! Component: 2050 - total flux cleaned = -0.000565739 Jy ! Component: 2100 - total flux cleaned = -0.000587258 Jy ! Component: 2150 - total flux cleaned = -0.000629743 Jy ! Component: 2200 - total flux cleaned = -0.00060841 Jy ! Component: 2250 - total flux cleaned = -0.00062956 Jy ! Component: 2300 - total flux cleaned = -0.000670934 Jy ! Component: 2350 - total flux cleaned = -0.000608981 Jy ! Component: 2400 - total flux cleaned = -0.000649876 Jy ! Component: 2450 - total flux cleaned = -0.000547938 Jy ! Component: 2500 - total flux cleaned = -0.000548007 Jy ! Component: 2550 - total flux cleaned = -0.000467568 Jy ! Component: 2600 - total flux cleaned = -0.00044748 Jy ! Component: 2650 - total flux cleaned = -0.000347862 Jy ! Component: 2700 - total flux cleaned = -0.000288383 Jy ! Component: 2750 - total flux cleaned = -0.000248813 Jy ! Component: 2800 - total flux cleaned = -0.000170128 Jy ! Component: 2850 - total flux cleaned = -9.15956e-05 Jy ! Component: 2900 - total flux cleaned = -5.26357e-05 Jy ! Component: 2950 - total flux cleaned = 2.53177e-05 Jy ! Component: 3000 - total flux cleaned = 6.41389e-05 Jy ! Component: 3050 - total flux cleaned = 8.35887e-05 Jy ! Component: 3100 - total flux cleaned = 0.000199741 Jy ! Component: 3150 - total flux cleaned = 0.000257619 Jy ! Component: 3200 - total flux cleaned = 0.000296075 Jy ! Component: 3250 - total flux cleaned = 0.000353849 Jy ! Component: 3300 - total flux cleaned = 0.000315286 Jy ! Component: 3350 - total flux cleaned = 0.000353594 Jy ! Component: 3400 - total flux cleaned = 0.000430255 Jy ! Component: 3450 - total flux cleaned = 0.000449287 Jy ! Component: 3500 - total flux cleaned = 0.000487574 Jy ! Component: 3550 - total flux cleaned = 0.000563873 Jy ! Component: 3600 - total flux cleaned = 0.000544807 Jy ! Component: 3650 - total flux cleaned = 0.000601899 Jy ! Component: 3700 - total flux cleaned = 0.000639977 Jy ! Component: 3750 - total flux cleaned = 0.000715833 Jy ! Component: 3800 - total flux cleaned = 0.000734746 Jy ! Component: 3850 - total flux cleaned = 0.000791488 Jy ! Component: 3900 - total flux cleaned = 0.00079162 Jy ! Component: 3950 - total flux cleaned = 0.000867318 Jy ! Component: 4000 - total flux cleaned = 0.000905133 Jy ! Component: 4050 - total flux cleaned = 0.000943 Jy ! Total flux subtracted in 4096 components = 0.000999737 Jy ! Clean residual min=-0.001604 max=0.001046 Jy/beam ! Clean residual mean=0.000002 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.911467 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 385 components and 0.911467 Jy ![Exited script file: muppet] wmap "J0805+6144_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 11.19 at 71.05 degrees (North through East) ! Clean map min=-0.0029856 max=0.68267 Jy/beam ! Writing clean map to FITS file: J0805+6144_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.68267 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000314059 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.138013 0.138013 0.276027 0.552054 1.10411 2.20822 4.41643 8.83286 17.6657 35.3314 70.6629 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.682 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 11.19 at 71.05 degrees (North through East) ! Clean map min=-0.0029856 max=0.68267 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0805+6144_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:49:29 2017