! Started logfile: J0803+0421_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:09:55 2017 obs J0803+0421_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0803+0421_S_2015_01_23_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968226 visibilities/baseline/integration-bin. ! Found source: J0803+0421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 19868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0803+0421_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.784489Jy sigma=0.008369 ! Fit after self-cal, rms=0.727061Jy sigma=0.007686 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=6.4 mas, bpa=-3.952 degrees ! Estimated noise=807.384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230388 Jy ! Component: 100 - total flux cleaned = 0.281213 Jy ! Total flux subtracted in 100 components = 0.281213 Jy ! Clean residual min=-0.013631 max=0.017918 Jy/beam ! Clean residual mean=-0.000007 rms=0.003066 Jy/beam ! Combined flux in latest and established models = 0.281213 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.281213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164450Jy sigma=0.001034 ! Fit after self-cal, rms=0.164436Jy sigma=0.001034 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=7.311 mas, bpa=-3.675 degrees ! Estimated noise=497.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.5, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229502 Jy ! Component: 100 - total flux cleaned = 0.0368967 Jy ! Component: 150 - total flux cleaned = 0.046639 Jy ! Component: 200 - total flux cleaned = 0.0527067 Jy ! Total flux subtracted in 200 components = 0.0527067 Jy ! Clean residual min=-0.009905 max=0.014339 Jy/beam ! Clean residual mean=-0.000018 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 0.33392 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 54 components and 0.33392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161183Jy sigma=0.000970 ! Fit after self-cal, rms=0.160914Jy sigma=0.000965 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.35 HN 0.92 KP 1.07 ! LA 0.97 MK 1.01 NL 1.02 OV 0.95 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.70 HN 0.98 KP 0.97 ! LA 0.96 MK 1.02 NL 1.18 OV 0.98 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.86 HN 0.97 KP 0.85 ! LA 0.76 MK 1.05 NL 1.44 OV 0.92 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.51 HN 0.94 KP 0.79 ! LA 0.80 MK 1.02 NL 0.97 OV 0.98 ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.160914Jy sigma=0.000965 ! Fit after self-cal, rms=0.219477Jy sigma=0.000828 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=7.377 mas, bpa=-3.576 degrees ! Estimated noise=497.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00359737 Jy ! Component: 100 - total flux cleaned = -0.00440198 Jy ! Component: 150 - total flux cleaned = -0.00496845 Jy ! Component: 200 - total flux cleaned = -0.00537581 Jy ! Total flux subtracted in 200 components = -0.00537581 Jy ! Clean residual min=-0.007262 max=0.006489 Jy/beam ! Clean residual mean=-0.000017 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.328544 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 94 components and 0.328544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219109Jy sigma=0.000826 ! Fit after self-cal, rms=0.219217Jy sigma=0.000825 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219217Jy sigma=0.000825 ! Fit after self-cal, rms=0.231437Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=7.386 mas, bpa=-3.545 degrees ! Estimated noise=496.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0029256 Jy ! Component: 100 - total flux cleaned = -0.00299771 Jy ! Component: 150 - total flux cleaned = -0.00319048 Jy ! Component: 200 - total flux cleaned = -0.00340415 Jy ! Total flux subtracted in 200 components = -0.00340415 Jy ! Clean residual min=-0.002562 max=0.002613 Jy/beam ! Clean residual mean=0.000000 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.32514 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 0.32514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231343Jy sigma=0.000788 ! Fit after self-cal, rms=0.231364Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205684 Jy ! Component: 100 - total flux cleaned = 0.00213223 Jy ! Component: 150 - total flux cleaned = 0.00208246 Jy ! Component: 200 - total flux cleaned = 0.00199456 Jy ! Total flux subtracted in 200 components = 0.00199456 Jy ! Clean residual min=-0.002222 max=0.002064 Jy/beam ! Clean residual mean=-0.000000 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.327134 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 144 components and 0.327135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231304Jy sigma=0.000787 ! Fit after self-cal, rms=0.231305Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231305Jy sigma=0.000787 ! Fit after self-cal, rms=0.233911Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=7.391 mas, bpa=-3.577 degrees ! Estimated noise=496.715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150798 Jy ! Component: 100 - total flux cleaned = -0.00165115 Jy ! Component: 150 - total flux cleaned = -0.00176803 Jy ! Component: 200 - total flux cleaned = -0.00187645 Jy ! Total flux subtracted in 200 components = -0.00187645 Jy ! Clean residual min=-0.002047 max=0.001707 Jy/beam ! Clean residual mean=0.000000 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.325258 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 157 components and 0.325258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233871Jy sigma=0.000786 ! Fit after self-cal, rms=0.233871Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373454 Jy ! Component: 100 - total flux cleaned = -0.000338257 Jy ! Component: 150 - total flux cleaned = -0.000337726 Jy ! Component: 200 - total flux cleaned = -0.000308402 Jy ! Total flux subtracted in 200 components = -0.000308402 Jy ! Clean residual min=-0.001949 max=0.001651 Jy/beam ! Clean residual mean=-0.000000 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.32495 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 169 components and 0.32495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233851Jy sigma=0.000786 ! Fit after self-cal, rms=0.233851Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233851Jy sigma=0.000786 ! Fit after self-cal, rms=0.235356Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.147 mas, bmaj=11.48 mas, bpa=-4.846 degrees ! Estimated noise=644.906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153225 Jy ! Component: 100 - total flux cleaned = -0.00169508 Jy ! Component: 150 - total flux cleaned = -0.00169604 Jy ! Component: 200 - total flux cleaned = -0.00182717 Jy ! Total flux subtracted in 200 components = -0.00182717 Jy ! Clean residual min=-0.002409 max=0.001879 Jy/beam ! Clean residual mean=0.000000 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.323122 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 186 components and 0.323123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235338Jy sigma=0.000785 ! Fit after self-cal, rms=0.235335Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031643 Jy ! Component: 100 - total flux cleaned = -0.000291448 Jy ! Component: 150 - total flux cleaned = -0.000334054 Jy ! Component: 200 - total flux cleaned = -0.00033473 Jy ! Total flux subtracted in 200 components = -0.00033473 Jy ! Clean residual min=-0.002398 max=0.001872 Jy/beam ! Clean residual mean=0.000000 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.322788 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 199 components and 0.322788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235324Jy sigma=0.000785 ! Fit after self-cal, rms=0.235322Jy sigma=0.000785 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=7.392 mas, bpa=-3.585 degrees ! Estimated noise=496.631 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 7.392 at -3.585 degrees (North through East) ! Clean map min=-0.0023099 max=0.29287 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=6.459 mas, bpa=-3.914 degrees ! Estimated noise=807.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230248 Jy ! Component: 100 - total flux cleaned = 0.280614 Jy ! Component: 150 - total flux cleaned = 0.295697 Jy ! Component: 200 - total flux cleaned = 0.303529 Jy ! Total flux subtracted in 200 components = 0.303529 Jy ! Clean residual min=-0.003393 max=0.004035 Jy/beam ! Clean residual mean=0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.303529 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.303529 Jy ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=7.392 mas, bpa=-3.585 degrees ! Estimated noise=496.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063406 Jy ! Component: 100 - total flux cleaned = 0.0102085 Jy ! Component: 150 - total flux cleaned = 0.0129877 Jy ! Component: 200 - total flux cleaned = 0.0145216 Jy ! Total flux subtracted in 200 components = 0.0145216 Jy ! Clean residual min=-0.002143 max=0.001781 Jy/beam ! Clean residual mean=0.000001 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.318051 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 56 components and 0.318051 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.147 mas, bmaj=11.48 mas, bpa=-4.846 degrees ! Estimated noise=644.906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268566 Jy ! Component: 100 - total flux cleaned = 0.00370763 Jy ! Component: 150 - total flux cleaned = 0.00419181 Jy ! Component: 200 - total flux cleaned = 0.00450389 Jy ! Total flux subtracted in 200 components = 0.00450389 Jy ! Clean residual min=-0.002303 max=0.001985 Jy/beam ! Clean residual mean=0.000001 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.322554 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.83379e-05 Jy ! Component: 100 - total flux cleaned = 0.000185678 Jy ! Component: 150 - total flux cleaned = 0.000284881 Jy ! Component: 200 - total flux cleaned = 0.00032941 Jy ! Total flux subtracted in 200 components = 0.00032941 Jy ! Clean residual min=-0.002344 max=0.001920 Jy/beam ! Clean residual mean=0.000000 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.322884 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 124 components and 0.322884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=7.392 mas, bpa=-3.585 degrees ! Estimated noise=496.631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000468045 Jy ! Component: 100 - total flux cleaned = -0.000344044 Jy ! Component: 150 - total flux cleaned = -0.000238555 Jy ! Component: 200 - total flux cleaned = -0.000175436 Jy ! Total flux subtracted in 200 components = -0.000175436 Jy ! Clean residual min=-0.001843 max=0.001608 Jy/beam ! Clean residual mean=-0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.322708 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 0.322708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235302Jy sigma=0.000785 ! Fit after self-cal, rms=0.235283Jy sigma=0.000785 wmodel J0803+0421_S_2015_01_23_pus_map.mod ! Writing 147 model components to file: J0803+0421_S_2015_01_23_pus_map.mod wobs J0803+0421_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0803+0421_S_2015_01_23_pus_uvs.fits wwins J0803+0421_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0803+0421_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000812567 Jy ! Component: 100 - total flux cleaned = -0.00107242 Jy ! Component: 150 - total flux cleaned = -0.00123436 Jy ! Component: 200 - total flux cleaned = -0.0013115 Jy ! Component: 250 - total flux cleaned = -0.00136079 Jy ! Component: 300 - total flux cleaned = -0.00143341 Jy ! Component: 350 - total flux cleaned = -0.00155068 Jy ! Component: 400 - total flux cleaned = -0.00166526 Jy ! Component: 450 - total flux cleaned = -0.00186609 Jy ! Component: 500 - total flux cleaned = -0.00190949 Jy ! Component: 550 - total flux cleaned = -0.0019519 Jy ! Component: 600 - total flux cleaned = -0.00186749 Jy ! Component: 650 - total flux cleaned = -0.00186722 Jy ! Component: 700 - total flux cleaned = -0.00182637 Jy ! Component: 750 - total flux cleaned = -0.00182664 Jy ! Component: 800 - total flux cleaned = -0.00186606 Jy ! Component: 850 - total flux cleaned = -0.00190483 Jy ! Component: 900 - total flux cleaned = -0.00194291 Jy ! Component: 950 - total flux cleaned = -0.00196155 Jy ! Component: 1000 - total flux cleaned = -0.00192435 Jy ! Component: 1050 - total flux cleaned = -0.00192451 Jy ! Component: 1100 - total flux cleaned = -0.0019601 Jy ! Component: 1150 - total flux cleaned = -0.0018526 Jy ! Component: 1200 - total flux cleaned = -0.00183498 Jy ! Component: 1250 - total flux cleaned = -0.00179969 Jy ! Component: 1300 - total flux cleaned = -0.00171364 Jy ! Component: 1350 - total flux cleaned = -0.00167976 Jy ! Component: 1400 - total flux cleaned = -0.00164603 Jy ! Component: 1450 - total flux cleaned = -0.00154651 Jy ! Component: 1500 - total flux cleaned = -0.00151371 Jy ! Component: 1550 - total flux cleaned = -0.00156254 Jy ! Component: 1600 - total flux cleaned = -0.0014978 Jy ! Component: 1650 - total flux cleaned = -0.00141822 Jy ! Component: 1700 - total flux cleaned = -0.00146556 Jy ! Component: 1750 - total flux cleaned = -0.00144977 Jy ! Component: 1800 - total flux cleaned = -0.00143432 Jy ! Component: 1850 - total flux cleaned = -0.0014037 Jy ! Component: 1900 - total flux cleaned = -0.00141888 Jy ! Component: 1950 - total flux cleaned = -0.00140397 Jy ! Component: 2000 - total flux cleaned = -0.00134448 Jy ! Component: 2050 - total flux cleaned = -0.00137413 Jy ! Component: 2100 - total flux cleaned = -0.00137405 Jy ! Component: 2150 - total flux cleaned = -0.00135969 Jy ! Component: 2200 - total flux cleaned = -0.00133094 Jy ! Component: 2250 - total flux cleaned = -0.00147389 Jy ! Component: 2300 - total flux cleaned = -0.0014311 Jy ! Component: 2350 - total flux cleaned = -0.00147312 Jy ! Component: 2400 - total flux cleaned = -0.00143114 Jy ! Component: 2450 - total flux cleaned = -0.00145889 Jy ! Component: 2500 - total flux cleaned = -0.00145879 Jy ! Component: 2550 - total flux cleaned = -0.00145882 Jy ! Component: 2600 - total flux cleaned = -0.00145892 Jy ! Component: 2650 - total flux cleaned = -0.00149928 Jy ! Component: 2700 - total flux cleaned = -0.00152578 Jy ! Component: 2750 - total flux cleaned = -0.00155226 Jy ! Component: 2800 - total flux cleaned = -0.0015787 Jy ! Component: 2850 - total flux cleaned = -0.00157861 Jy ! Component: 2900 - total flux cleaned = -0.00164359 Jy ! Component: 2950 - total flux cleaned = -0.00165656 Jy ! Component: 3000 - total flux cleaned = -0.00168217 Jy ! Component: 3050 - total flux cleaned = -0.00166945 Jy ! Component: 3100 - total flux cleaned = -0.00174536 Jy ! Component: 3150 - total flux cleaned = -0.00173282 Jy ! Component: 3200 - total flux cleaned = -0.00178283 Jy ! Component: 3250 - total flux cleaned = -0.00183254 Jy ! Component: 3300 - total flux cleaned = -0.00185704 Jy ! Component: 3350 - total flux cleaned = -0.00190609 Jy ! Component: 3400 - total flux cleaned = -0.00189383 Jy ! Component: 3450 - total flux cleaned = -0.00194225 Jy ! Component: 3500 - total flux cleaned = -0.00196637 Jy ! Component: 3550 - total flux cleaned = -0.00199027 Jy ! Component: 3600 - total flux cleaned = -0.00207373 Jy ! Component: 3650 - total flux cleaned = -0.00213306 Jy ! Component: 3700 - total flux cleaned = -0.00215669 Jy ! Component: 3750 - total flux cleaned = -0.00222709 Jy ! Component: 3800 - total flux cleaned = -0.00226219 Jy ! Component: 3850 - total flux cleaned = -0.00230865 Jy ! Component: 3900 - total flux cleaned = -0.00233183 Jy ! Component: 3950 - total flux cleaned = -0.00236634 Jy ! Component: 4000 - total flux cleaned = -0.00241212 Jy ! Component: 4050 - total flux cleaned = -0.00246912 Jy ! Total flux subtracted in 4096 components = -0.00244635 Jy ! Clean residual min=-0.000655 max=0.000646 Jy/beam ! Clean residual mean=-0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.320262 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 436 components and 0.320262 Jy ![Exited script file: muppet] wmap "J0803+0421_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 7.392 at -3.585 degrees (North through East) ! Clean map min=-0.0020024 max=0.29493 Jy/beam ! Writing clean map to FITS file: J0803+0421_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.294931 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213088 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.216751 0.216751 0.433502 0.867003 1.73401 3.46801 6.93603 13.8721 27.7441 55.4882 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.294 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 7.392 at -3.585 degrees (North through East) ! Clean map min=-0.0020024 max=0.29493 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0803+0421_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:17:37 2017