! Started logfile: J0801-2831_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:21:15 2017 obs J0801-2831_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0801-2831_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0801-2831 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0801-2831_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935015Jy sigma=0.010019 ! Fit after self-cal, rms=0.904079Jy sigma=0.009726 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.549 mas, bmaj=6.809 mas, bpa=6.317 degrees ! Estimated noise=1052.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0683795 Jy ! Component: 100 - total flux cleaned = 0.0964105 Jy ! Total flux subtracted in 100 components = 0.0964105 Jy ! Clean residual min=-0.009066 max=0.014272 Jy/beam ! Clean residual mean=-0.000120 rms=0.002872 Jy/beam ! Combined flux in latest and established models = 0.0964105 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0964105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100601Jy sigma=0.000989 ! Fit after self-cal, rms=0.100572Jy sigma=0.000988 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=8.514 mas, bpa=4.919 degrees ! Estimated noise=769.584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264997 Jy ! Component: 100 - total flux cleaned = 0.0394482 Jy ! Component: 150 - total flux cleaned = 0.0461147 Jy ! Component: 200 - total flux cleaned = 0.0496785 Jy ! Total flux subtracted in 200 components = 0.0496785 Jy ! Clean residual min=-0.005668 max=0.007586 Jy/beam ! Clean residual mean=-0.000135 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.146089 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 68 components and 0.146089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093622Jy sigma=0.000916 ! Fit after self-cal, rms=0.093748Jy sigma=0.000915 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.99 ! MK 1.18 NL 1.07 OV 0.98 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.93 ! MK 1.23 NL 1.16 OV 1.00 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* KP 1.00* LA 0.86 ! MK 0.97 NL 1.05 OV 0.94 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.85 ! MK 0.93 NL 1.13 OV 1.00 PT 0.95 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.093748Jy sigma=0.000915 ! Fit after self-cal, rms=0.091397Jy sigma=0.000900 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.623 mas, bpa=5.662 degrees ! Estimated noise=773.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525104 Jy ! Component: 100 - total flux cleaned = 0.00635251 Jy ! Component: 150 - total flux cleaned = 0.00722329 Jy ! Component: 200 - total flux cleaned = 0.00746529 Jy ! Total flux subtracted in 200 components = 0.00746529 Jy ! Clean residual min=-0.004171 max=0.003774 Jy/beam ! Clean residual mean=-0.000025 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.153554 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.153554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090947Jy sigma=0.000894 ! Fit after self-cal, rms=0.090821Jy sigma=0.000893 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090821Jy sigma=0.000893 ! Fit after self-cal, rms=0.089294Jy sigma=0.000891 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.563 mas, bpa=5.72 degrees ! Estimated noise=768.029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231174 Jy ! Component: 100 - total flux cleaned = 0.00288594 Jy ! Component: 150 - total flux cleaned = 0.00326225 Jy ! Component: 200 - total flux cleaned = 0.00351971 Jy ! Total flux subtracted in 200 components = 0.00351971 Jy ! Clean residual min=-0.003274 max=0.003098 Jy/beam ! Clean residual mean=-0.000025 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.157074 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.157074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089155Jy sigma=0.000889 ! Fit after self-cal, rms=0.089265Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26.5, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747604 Jy ! Component: 100 - total flux cleaned = 0.000648145 Jy ! Component: 150 - total flux cleaned = 0.000966451 Jy ! Component: 200 - total flux cleaned = 0.00101742 Jy ! Total flux subtracted in 200 components = 0.00101742 Jy ! Clean residual min=-0.002790 max=0.002403 Jy/beam ! Clean residual mean=-0.000024 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.158091 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 110 components and 0.158091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089084Jy sigma=0.000887 ! Fit after self-cal, rms=0.089190Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089190Jy sigma=0.000886 ! Fit after self-cal, rms=0.088276Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.517 mas, bpa=5.881 degrees ! Estimated noise=761.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126198 Jy ! Component: 100 - total flux cleaned = 0.00152669 Jy ! Component: 150 - total flux cleaned = 0.00152837 Jy ! Component: 200 - total flux cleaned = 0.0014823 Jy ! Total flux subtracted in 200 components = 0.0014823 Jy ! Clean residual min=-0.002500 max=0.002343 Jy/beam ! Clean residual mean=-0.000020 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.159574 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 0.159574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088181Jy sigma=0.000885 ! Fit after self-cal, rms=0.088319Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181342 Jy ! Component: 100 - total flux cleaned = 0.000179654 Jy ! Component: 150 - total flux cleaned = 0.000180358 Jy ! Component: 200 - total flux cleaned = 0.000141621 Jy ! Total flux subtracted in 200 components = 0.000141621 Jy ! Clean residual min=-0.002422 max=0.002208 Jy/beam ! Clean residual mean=-0.000019 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.159715 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 132 components and 0.159715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088259Jy sigma=0.000884 ! Fit after self-cal, rms=0.088330Jy sigma=0.000884 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088330Jy sigma=0.000884 ! Fit after self-cal, rms=0.088317Jy sigma=0.000884 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.998 mas, bmaj=20.84 mas, bpa=3.323 degrees ! Estimated noise=922.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103645 Jy ! Component: 100 - total flux cleaned = 0.00133893 Jy ! Component: 150 - total flux cleaned = 0.00148952 Jy ! Component: 200 - total flux cleaned = 0.00154619 Jy ! Total flux subtracted in 200 components = 0.00154619 Jy ! Clean residual min=-0.002333 max=0.002064 Jy/beam ! Clean residual mean=-0.000029 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.161262 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 143 components and 0.161262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088305Jy sigma=0.000884 ! Fit after self-cal, rms=0.088344Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.61423e-05 Jy ! Component: 100 - total flux cleaned = 0.000114978 Jy ! Component: 150 - total flux cleaned = 0.000131472 Jy ! Component: 200 - total flux cleaned = 0.000164429 Jy ! Total flux subtracted in 200 components = 0.000164429 Jy ! Clean residual min=-0.002280 max=0.002045 Jy/beam ! Clean residual mean=-0.000029 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.161426 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 149 components and 0.161426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088335Jy sigma=0.000884 ! Fit after self-cal, rms=0.088353Jy sigma=0.000884 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.527 mas, bpa=5.998 degrees ! Estimated noise=760.253 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 8.527 at 5.998 degrees (North through East) ! Clean map min=-0.0052988 max=0.090669 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.86 mas, bpa=7.674 degrees ! Estimated noise=1033.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660858 Jy ! Component: 100 - total flux cleaned = 0.0969263 Jy ! Component: 150 - total flux cleaned = 0.11724 Jy ! Component: 200 - total flux cleaned = 0.131227 Jy ! Total flux subtracted in 200 components = 0.131227 Jy ! Clean residual min=-0.008838 max=0.009326 Jy/beam ! Clean residual mean=-0.000051 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 0.131227 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.131227 Jy ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.527 mas, bpa=5.998 degrees ! Estimated noise=760.253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134975 Jy ! Component: 100 - total flux cleaned = 0.0191389 Jy ! Component: 150 - total flux cleaned = 0.0219209 Jy ! Component: 200 - total flux cleaned = 0.0232341 Jy ! Total flux subtracted in 200 components = 0.0232341 Jy ! Clean residual min=-0.003945 max=0.003962 Jy/beam ! Clean residual mean=-0.000039 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.154461 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 64 components and 0.154461 Jy ! Inverting map ! Added new window around map position (2, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247403 Jy ! Component: 100 - total flux cleaned = 0.00335991 Jy ! Component: 150 - total flux cleaned = 0.0041109 Jy ! Component: 200 - total flux cleaned = 0.00466668 Jy ! Total flux subtracted in 200 components = 0.00466668 Jy ! Clean residual min=-0.003021 max=0.002670 Jy/beam ! Clean residual mean=-0.000022 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.159128 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 87 components and 0.159128 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.998 mas, bmaj=20.84 mas, bpa=3.323 degrees ! Estimated noise=922.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166446 Jy ! Component: 100 - total flux cleaned = 0.00166324 Jy ! Component: 150 - total flux cleaned = 0.00175542 Jy ! Component: 200 - total flux cleaned = 0.00185432 Jy ! Total flux subtracted in 200 components = 0.00185432 Jy ! Clean residual min=-0.002457 max=0.001965 Jy/beam ! Clean residual mean=-0.000031 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.160982 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70625e-05 Jy ! Component: 100 - total flux cleaned = 0.000129317 Jy ! Component: 150 - total flux cleaned = 0.000208722 Jy ! Component: 200 - total flux cleaned = 0.000283136 Jy ! Total flux subtracted in 200 components = 0.000283136 Jy ! Clean residual min=-0.002383 max=0.001953 Jy/beam ! Clean residual mean=-0.000030 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.161265 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 137 components and 0.161265 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.527 mas, bpa=5.998 degrees ! Estimated noise=760.253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197628 Jy ! Component: 100 - total flux cleaned = -8.43114e-05 Jy ! Component: 150 - total flux cleaned = 7.12773e-05 Jy ! Component: 200 - total flux cleaned = 0.000164856 Jy ! Total flux subtracted in 200 components = 0.000164856 Jy ! Clean residual min=-0.002403 max=0.002137 Jy/beam ! Clean residual mean=-0.000014 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.16143 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 154 components and 0.16143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088312Jy sigma=0.000884 ! Fit after self-cal, rms=0.088362Jy sigma=0.000884 wmodel J0801-2831_S_2014_01_04_pus_map.mod ! Writing 154 model components to file: J0801-2831_S_2014_01_04_pus_map.mod wobs J0801-2831_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0801-2831_S_2014_01_04_pus_uvs.fits wwins J0801-2831_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0801-2831_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518285 Jy ! Component: 100 - total flux cleaned = -0.000712892 Jy ! Component: 150 - total flux cleaned = -0.00085755 Jy ! Component: 200 - total flux cleaned = -0.00102474 Jy ! Component: 250 - total flux cleaned = -0.00111885 Jy ! Component: 300 - total flux cleaned = -0.00132706 Jy ! Component: 350 - total flux cleaned = -0.00155417 Jy ! Component: 400 - total flux cleaned = -0.0017722 Jy ! Component: 450 - total flux cleaned = -0.00198212 Jy ! Component: 500 - total flux cleaned = -0.00216061 Jy ! Component: 550 - total flux cleaned = -0.00243324 Jy ! Component: 600 - total flux cleaned = -0.00264975 Jy ! Component: 650 - total flux cleaned = -0.00281414 Jy ! Component: 700 - total flux cleaned = -0.00295157 Jy ! Component: 750 - total flux cleaned = -0.00306342 Jy ! Component: 800 - total flux cleaned = -0.00315087 Jy ! Component: 850 - total flux cleaned = -0.00319418 Jy ! Component: 900 - total flux cleaned = -0.0032775 Jy ! Component: 950 - total flux cleaned = -0.00337908 Jy ! Component: 1000 - total flux cleaned = -0.00341899 Jy ! Component: 1050 - total flux cleaned = -0.0035361 Jy ! Component: 1100 - total flux cleaned = -0.00359342 Jy ! Component: 1150 - total flux cleaned = -0.00372484 Jy ! Component: 1200 - total flux cleaned = -0.00381704 Jy ! Component: 1250 - total flux cleaned = -0.00387145 Jy ! Component: 1300 - total flux cleaned = -0.00396075 Jy ! Component: 1350 - total flux cleaned = -0.00403088 Jy ! Component: 1400 - total flux cleaned = -0.00406546 Jy ! Component: 1450 - total flux cleaned = -0.00411666 Jy ! Component: 1500 - total flux cleaned = -0.00416695 Jy ! Component: 1550 - total flux cleaned = -0.00419987 Jy ! Component: 1600 - total flux cleaned = -0.00423218 Jy ! Component: 1650 - total flux cleaned = -0.00424802 Jy ! Component: 1700 - total flux cleaned = -0.0043112 Jy ! Component: 1750 - total flux cleaned = -0.00429553 Jy ! Component: 1800 - total flux cleaned = -0.00434171 Jy ! Component: 1850 - total flux cleaned = -0.00434149 Jy ! Component: 1900 - total flux cleaned = -0.00432642 Jy ! Component: 1950 - total flux cleaned = -0.0043559 Jy ! Component: 2000 - total flux cleaned = -0.00437056 Jy ! Component: 2050 - total flux cleaned = -0.00439963 Jy ! Component: 2100 - total flux cleaned = -0.00444243 Jy ! Component: 2150 - total flux cleaned = -0.00441403 Jy ! Component: 2200 - total flux cleaned = -0.00438598 Jy ! Component: 2250 - total flux cleaned = -0.00437229 Jy ! Component: 2300 - total flux cleaned = -0.00435862 Jy ! Component: 2350 - total flux cleaned = -0.00435882 Jy ! Component: 2400 - total flux cleaned = -0.00433213 Jy ! Component: 2450 - total flux cleaned = -0.00433219 Jy ! Component: 2500 - total flux cleaned = -0.00430605 Jy ! Component: 2550 - total flux cleaned = -0.00429318 Jy ! Component: 2600 - total flux cleaned = -0.0043189 Jy ! Component: 2650 - total flux cleaned = -0.00424221 Jy ! Component: 2700 - total flux cleaned = -0.00419152 Jy ! Component: 2750 - total flux cleaned = -0.00415381 Jy ! Component: 2800 - total flux cleaned = -0.00411619 Jy ! Component: 2850 - total flux cleaned = -0.00402923 Jy ! Component: 2900 - total flux cleaned = -0.00396744 Jy ! Component: 2950 - total flux cleaned = -0.00390601 Jy ! Component: 3000 - total flux cleaned = -0.00383281 Jy ! Component: 3050 - total flux cleaned = -0.00379644 Jy ! Component: 3100 - total flux cleaned = -0.0037241 Jy ! Component: 3150 - total flux cleaned = -0.00364025 Jy ! Component: 3200 - total flux cleaned = -0.00360447 Jy ! Component: 3250 - total flux cleaned = -0.00355699 Jy ! Component: 3300 - total flux cleaned = -0.00348617 Jy ! Component: 3350 - total flux cleaned = -0.00342743 Jy ! Component: 3400 - total flux cleaned = -0.00335743 Jy ! Component: 3450 - total flux cleaned = -0.00329929 Jy ! Component: 3500 - total flux cleaned = -0.00322998 Jy ! Component: 3550 - total flux cleaned = -0.00317247 Jy ! Component: 3600 - total flux cleaned = -0.00309253 Jy ! Component: 3650 - total flux cleaned = -0.00304701 Jy ! Component: 3700 - total flux cleaned = -0.0029676 Jy ! Component: 3750 - total flux cleaned = -0.002866 Jy ! Component: 3800 - total flux cleaned = -0.00282094 Jy ! Component: 3850 - total flux cleaned = -0.00277592 Jy ! Component: 3900 - total flux cleaned = -0.0026974 Jy ! Component: 3950 - total flux cleaned = -0.00266377 Jy ! Component: 4000 - total flux cleaned = -0.00259679 Jy ! Component: 4050 - total flux cleaned = -0.0025633 Jy ! Total flux subtracted in 4096 components = -0.00251886 Jy ! Clean residual min=-0.000658 max=0.000649 Jy/beam ! Clean residual mean=-0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.158911 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 376 components and 0.158911 Jy ![Exited script file: muppet] wmap "J0801-2831_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 8.527 at 5.998 degrees (North through East) ! Clean map min=-0.0030865 max=0.087269 Jy/beam ! Writing clean map to FITS file: J0801-2831_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0872693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.628086 0.628086 1.25617 2.51234 5.02469 10.0494 20.0987 40.1975 80.395 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 8.527 at 5.998 degrees (North through East) ! Clean map min=-0.0030865 max=0.087269 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0801-2831_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:21:19 2017