! Started logfile: J0800-2302_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:21:10 2017 obs J0800-2302_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0800-2302_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0800-2302 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0800-2302_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978385Jy sigma=0.011768 ! Fit after self-cal, rms=0.945206Jy sigma=0.011383 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=5.395 mas, bpa=-2.964 degrees ! Estimated noise=868.284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.044021 Jy ! Component: 100 - total flux cleaned = 0.0561826 Jy ! Total flux subtracted in 100 components = 0.0561826 Jy ! Clean residual min=-0.005632 max=0.006364 Jy/beam ! Clean residual mean=-0.000034 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.0561826 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0561826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088501Jy sigma=0.000894 ! Fit after self-cal, rms=0.088223Jy sigma=0.000891 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=6.627 mas, bpa=-3.667 degrees ! Estimated noise=652.941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941794 Jy ! Component: 100 - total flux cleaned = 0.0141053 Jy ! Component: 150 - total flux cleaned = 0.0165819 Jy ! Component: 200 - total flux cleaned = 0.0179244 Jy ! Total flux subtracted in 200 components = 0.0179244 Jy ! Clean residual min=-0.004280 max=0.005769 Jy/beam ! Clean residual mean=-0.000054 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.074107 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.074107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087389Jy sigma=0.000878 ! Fit after self-cal, rms=0.087644Jy sigma=0.000877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* KP 1.00* LA 1.03 ! MK 1.01 NL 0.94 OV 1.00 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.00 ! MK 0.96 NL 1.02 OV 1.24 PT 1.01 ! SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.79 ! MK 0.94 NL 1.01 OV 1.16 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 0.92 ! MK 1.03 NL 1.08 OV 1.23 PT 0.99 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.087644Jy sigma=0.000877 ! Fit after self-cal, rms=0.088253Jy sigma=0.000871 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=6.614 mas, bpa=-4.236 degrees ! Estimated noise=653.182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-64, 106). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598445 Jy ! Component: 100 - total flux cleaned = 0.00902636 Jy ! Component: 150 - total flux cleaned = 0.0111709 Jy ! Component: 200 - total flux cleaned = 0.0122787 Jy ! Total flux subtracted in 200 components = 0.0122787 Jy ! Clean residual min=-0.004441 max=0.004396 Jy/beam ! Clean residual mean=-0.000015 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.0863857 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 56 components and 0.0863857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087746Jy sigma=0.000867 ! Fit after self-cal, rms=0.088058Jy sigma=0.000864 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088058Jy sigma=0.000864 ! Fit after self-cal, rms=0.098251Jy sigma=0.000857 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.581 mas, bpa=-3.594 degrees ! Estimated noise=664.816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279208 Jy ! Component: 100 - total flux cleaned = 0.0043104 Jy ! Component: 150 - total flux cleaned = 0.00466118 Jy ! Component: 200 - total flux cleaned = 0.00495195 Jy ! Total flux subtracted in 200 components = 0.00495195 Jy ! Clean residual min=-0.003075 max=0.003117 Jy/beam ! Clean residual mean=-0.000001 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0913377 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.0913377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098119Jy sigma=0.000856 ! Fit after self-cal, rms=0.098799Jy sigma=0.000855 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952874 Jy ! Component: 100 - total flux cleaned = 0.00114065 Jy ! Component: 150 - total flux cleaned = 0.00135032 Jy ! Component: 200 - total flux cleaned = 0.00146188 Jy ! Total flux subtracted in 200 components = 0.00146188 Jy ! Clean residual min=-0.003373 max=0.002786 Jy/beam ! Clean residual mean=0.000000 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0927996 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.0927995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098721Jy sigma=0.000855 ! Fit after self-cal, rms=0.098732Jy sigma=0.000855 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098732Jy sigma=0.000855 ! Fit after self-cal, rms=0.104177Jy sigma=0.000854 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=6.57 mas, bpa=-3.111 degrees ! Estimated noise=667.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182566 Jy ! Component: 100 - total flux cleaned = 0.00262662 Jy ! Component: 150 - total flux cleaned = 0.00266028 Jy ! Component: 200 - total flux cleaned = 0.00272669 Jy ! Total flux subtracted in 200 components = 0.00272669 Jy ! Clean residual min=-0.003059 max=0.002963 Jy/beam ! Clean residual mean=-0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0955262 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.0955262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104111Jy sigma=0.000854 ! Fit after self-cal, rms=0.104511Jy sigma=0.000853 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558977 Jy ! Component: 100 - total flux cleaned = 0.000596918 Jy ! Component: 150 - total flux cleaned = 0.000630606 Jy ! Component: 200 - total flux cleaned = 0.000693141 Jy ! Total flux subtracted in 200 components = 0.000693141 Jy ! Clean residual min=-0.003255 max=0.002869 Jy/beam ! Clean residual mean=-0.000001 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0962194 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.0962194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104464Jy sigma=0.000853 ! Fit after self-cal, rms=0.104514Jy sigma=0.000853 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104514Jy sigma=0.000853 ! Fit after self-cal, rms=0.108786Jy sigma=0.000853 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.953 mas, bmaj=16.53 mas, bpa=2.945 degrees ! Estimated noise=805.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160929 Jy ! Component: 100 - total flux cleaned = 0.00229297 Jy ! Component: 150 - total flux cleaned = 0.00243338 Jy ! Component: 200 - total flux cleaned = 0.00251234 Jy ! Total flux subtracted in 200 components = 0.00251234 Jy ! Clean residual min=-0.003372 max=0.003031 Jy/beam ! Clean residual mean=-0.000003 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.0987317 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.0987317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108743Jy sigma=0.000853 ! Fit after self-cal, rms=0.109001Jy sigma=0.000853 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062147 Jy ! Component: 100 - total flux cleaned = 0.000580459 Jy ! Component: 150 - total flux cleaned = 0.000507656 Jy ! Component: 200 - total flux cleaned = 0.000490604 Jy ! Total flux subtracted in 200 components = 0.000490604 Jy ! Clean residual min=-0.003538 max=0.002809 Jy/beam ! Clean residual mean=-0.000002 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.0992223 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 102 components and 0.0992223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108982Jy sigma=0.000853 ! Fit after self-cal, rms=0.108984Jy sigma=0.000853 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=6.559 mas, bpa=-2.734 degrees ! Estimated noise=669.508 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 6.559 at -2.734 degrees (North through East) ! Clean map min=-0.0030513 max=0.055989 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.509 mas, bmaj=5.307 mas, bpa=-1.719 degrees ! Estimated noise=890.349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042776 Jy ! Component: 100 - total flux cleaned = 0.0572924 Jy ! Component: 150 - total flux cleaned = 0.0666317 Jy ! Component: 200 - total flux cleaned = 0.073304 Jy ! Total flux subtracted in 200 components = 0.073304 Jy ! Clean residual min=-0.004542 max=0.004549 Jy/beam ! Clean residual mean=-0.000019 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.073304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.073304 Jy ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=6.559 mas, bpa=-2.734 degrees ! Estimated noise=669.508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070951 Jy ! Component: 100 - total flux cleaned = 0.0120163 Jy ! Component: 150 - total flux cleaned = 0.0156271 Jy ! Component: 200 - total flux cleaned = 0.0183233 Jy ! Total flux subtracted in 200 components = 0.0183233 Jy ! Clean residual min=-0.003532 max=0.003394 Jy/beam ! Clean residual mean=-0.000013 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0916274 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 54 components and 0.0916274 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.953 mas, bmaj=16.53 mas, bpa=2.945 degrees ! Estimated noise=805.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308921 Jy ! Component: 100 - total flux cleaned = 0.00503955 Jy ! Component: 150 - total flux cleaned = 0.00606141 Jy ! Component: 200 - total flux cleaned = 0.00637799 Jy ! Total flux subtracted in 200 components = 0.00637799 Jy ! Clean residual min=-0.003519 max=0.002814 Jy/beam ! Clean residual mean=-0.000006 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0980053 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190043 Jy ! Component: 100 - total flux cleaned = 0.000346814 Jy ! Component: 150 - total flux cleaned = 0.000457159 Jy ! Component: 200 - total flux cleaned = 0.000496159 Jy ! Total flux subtracted in 200 components = 0.000496159 Jy ! Clean residual min=-0.003593 max=0.002763 Jy/beam ! Clean residual mean=-0.000004 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0985015 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 86 components and 0.0985015 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=6.559 mas, bpa=-2.734 degrees ! Estimated noise=669.508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274459 Jy ! Component: 100 - total flux cleaned = -0.000444254 Jy ! Component: 150 - total flux cleaned = -0.000594757 Jy ! Component: 200 - total flux cleaned = -0.00069893 Jy ! Total flux subtracted in 200 components = -0.00069893 Jy ! Clean residual min=-0.003394 max=0.003097 Jy/beam ! Clean residual mean=-0.000003 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.0978026 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.0978026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109000Jy sigma=0.000853 ! Fit after self-cal, rms=0.108946Jy sigma=0.000853 wmodel J0800-2302_S_2014_01_04_pus_map.mod ! Writing 102 model components to file: J0800-2302_S_2014_01_04_pus_map.mod wobs J0800-2302_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0800-2302_S_2014_01_04_pus_uvs.fits wwins J0800-2302_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0800-2302_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000845994 Jy ! Component: 100 - total flux cleaned = -0.000895941 Jy ! Component: 150 - total flux cleaned = -0.00103091 Jy ! Component: 200 - total flux cleaned = -0.00115893 Jy ! Component: 250 - total flux cleaned = -0.00119698 Jy ! Component: 300 - total flux cleaned = -0.0012707 Jy ! Component: 350 - total flux cleaned = -0.00137702 Jy ! Component: 400 - total flux cleaned = -0.00148 Jy ! Component: 450 - total flux cleaned = -0.00164383 Jy ! Component: 500 - total flux cleaned = -0.00177071 Jy ! Component: 550 - total flux cleaned = -0.00180119 Jy ! Component: 600 - total flux cleaned = -0.00183082 Jy ! Component: 650 - total flux cleaned = -0.0019468 Jy ! Component: 700 - total flux cleaned = -0.00200359 Jy ! Component: 750 - total flux cleaned = -0.00216682 Jy ! Component: 800 - total flux cleaned = -0.00221957 Jy ! Component: 850 - total flux cleaned = -0.00234901 Jy ! Component: 900 - total flux cleaned = -0.0023237 Jy ! Component: 950 - total flux cleaned = -0.00229935 Jy ! Component: 1000 - total flux cleaned = -0.00232363 Jy ! Component: 1050 - total flux cleaned = -0.0022287 Jy ! Component: 1100 - total flux cleaned = -0.00218217 Jy ! Component: 1150 - total flux cleaned = -0.00211356 Jy ! Component: 1200 - total flux cleaned = -0.00200188 Jy ! Component: 1250 - total flux cleaned = -0.00191471 Jy ! Component: 1300 - total flux cleaned = -0.00182923 Jy ! Component: 1350 - total flux cleaned = -0.00178733 Jy ! Component: 1400 - total flux cleaned = -0.00176673 Jy ! Component: 1450 - total flux cleaned = -0.00170596 Jy ! Component: 1500 - total flux cleaned = -0.00168588 Jy ! Component: 1550 - total flux cleaned = -0.00170545 Jy ! Component: 1600 - total flux cleaned = -0.00170507 Jy ! Component: 1650 - total flux cleaned = -0.00162892 Jy ! Component: 1700 - total flux cleaned = -0.00172298 Jy ! Component: 1750 - total flux cleaned = -0.00168575 Jy ! Component: 1800 - total flux cleaned = -0.00168594 Jy ! Component: 1850 - total flux cleaned = -0.00174019 Jy ! Component: 1900 - total flux cleaned = -0.00170502 Jy ! Component: 1950 - total flux cleaned = -0.00170517 Jy ! Component: 2000 - total flux cleaned = -0.00170523 Jy ! Component: 2050 - total flux cleaned = -0.00168815 Jy ! Component: 2100 - total flux cleaned = -0.00168836 Jy ! Component: 2150 - total flux cleaned = -0.00165539 Jy ! Component: 2200 - total flux cleaned = -0.00163904 Jy ! Component: 2250 - total flux cleaned = -0.0016064 Jy ! Component: 2300 - total flux cleaned = -0.00160618 Jy ! Component: 2350 - total flux cleaned = -0.0015114 Jy ! Component: 2400 - total flux cleaned = -0.00152706 Jy ! Component: 2450 - total flux cleaned = -0.00148072 Jy ! Component: 2500 - total flux cleaned = -0.00151103 Jy ! Component: 2550 - total flux cleaned = -0.00152627 Jy ! Component: 2600 - total flux cleaned = -0.00157071 Jy ! Component: 2650 - total flux cleaned = -0.00154123 Jy ! Component: 2700 - total flux cleaned = -0.00158501 Jy ! Component: 2750 - total flux cleaned = -0.00155622 Jy ! Component: 2800 - total flux cleaned = -0.00157062 Jy ! Component: 2850 - total flux cleaned = -0.00155664 Jy ! Component: 2900 - total flux cleaned = -0.00154252 Jy ! Component: 2950 - total flux cleaned = -0.0015009 Jy ! Component: 3000 - total flux cleaned = -0.00150098 Jy ! Component: 3050 - total flux cleaned = -0.00150114 Jy ! Component: 3100 - total flux cleaned = -0.00152802 Jy ! Component: 3150 - total flux cleaned = -0.00152799 Jy ! Component: 3200 - total flux cleaned = -0.00151483 Jy ! Component: 3250 - total flux cleaned = -0.0015542 Jy ! Component: 3300 - total flux cleaned = -0.00155426 Jy ! Component: 3350 - total flux cleaned = -0.00152859 Jy ! Component: 3400 - total flux cleaned = -0.00155433 Jy ! Component: 3450 - total flux cleaned = -0.00154162 Jy ! Component: 3500 - total flux cleaned = -0.00154173 Jy ! Component: 3550 - total flux cleaned = -0.00156674 Jy ! Component: 3600 - total flux cleaned = -0.00157913 Jy ! Component: 3650 - total flux cleaned = -0.00157914 Jy ! Component: 3700 - total flux cleaned = -0.00164023 Jy ! Component: 3750 - total flux cleaned = -0.00165221 Jy ! Component: 3800 - total flux cleaned = -0.00166429 Jy ! Component: 3850 - total flux cleaned = -0.00168816 Jy ! Component: 3900 - total flux cleaned = -0.00166433 Jy ! Component: 3950 - total flux cleaned = -0.00167617 Jy ! Component: 4000 - total flux cleaned = -0.00165271 Jy ! Component: 4050 - total flux cleaned = -0.00164105 Jy ! Total flux subtracted in 4096 components = -0.00159479 Jy ! Clean residual min=-0.000642 max=0.000621 Jy/beam ! Clean residual mean=0.000005 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0962078 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 364 components and 0.0962078 Jy ![Exited script file: muppet] wmap "J0800-2302_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 6.559 at -2.734 degrees (North through East) ! Clean map min=-0.0019476 max=0.057438 Jy/beam ! Writing clean map to FITS file: J0800-2302_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0574375 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020085 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04905 1.04905 2.09811 4.19621 8.39242 16.7848 33.5697 67.1394 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 6.559 at -2.734 degrees (North through East) ! Clean map min=-0.0019476 max=0.057438 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0800-2302_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:21:15 2017