! Started logfile: J0754-3842_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:27:15 2016 obs J0754-3842_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0754-3842_S_2014_12_20_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613661 visibilities/baseline/integration-bin. ! Found source: J0754-3842 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 13476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0754-3842_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984215Jy sigma=0.007133 ! Fit after self-cal, rms=0.930641Jy sigma=0.006775 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=12.8 mas, bpa=14.47 degrees ! Estimated noise=1663.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539249 Jy ! Component: 100 - total flux cleaned = 0.0704823 Jy ! Total flux subtracted in 100 components = 0.0704823 Jy ! Clean residual min=-0.005939 max=0.007724 Jy/beam ! Clean residual mean=-0.000268 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.0704823 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0704823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113965Jy sigma=0.000765 ! Fit after self-cal, rms=0.113416Jy sigma=0.000760 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=14.81 mas, bpa=13.16 degrees ! Estimated noise=895.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134452 Jy ! Component: 100 - total flux cleaned = 0.0199001 Jy ! Component: 150 - total flux cleaned = 0.0232168 Jy ! Component: 200 - total flux cleaned = 0.0250306 Jy ! Total flux subtracted in 200 components = 0.0250306 Jy ! Clean residual min=-0.003958 max=0.004425 Jy/beam ! Clean residual mean=-0.000131 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.0955129 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 88 components and 0.0955129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111918Jy sigma=0.000750 ! Fit after self-cal, rms=0.111769Jy sigma=0.000749 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.84 HN 0.98 KP 1.07 ! LA 0.89 MK 1.00* NL 1.09 OV 1.00 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 HN 0.92 KP 1.40 ! LA 0.90 MK 1.00* NL 1.11 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 0.98 KP 1.07 ! LA 0.81 MK 1.00* NL 1.16 OV 0.99 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 0.93 KP 0.86 ! LA 0.81 MK 1.00* NL 1.14 OV 0.98 ! PT 1.02 SC 1.00 ! ! ! Fit before self-cal, rms=0.111769Jy sigma=0.000749 ! Fit after self-cal, rms=0.110570Jy sigma=0.000743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=14.94 mas, bpa=13.04 degrees ! Estimated noise=890.855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000786393 Jy ! Component: 100 - total flux cleaned = 0.000754718 Jy ! Component: 150 - total flux cleaned = 0.000690301 Jy ! Component: 200 - total flux cleaned = 0.000630663 Jy ! Total flux subtracted in 200 components = 0.000630663 Jy ! Clean residual min=-0.002853 max=0.002651 Jy/beam ! Clean residual mean=-0.000075 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0961436 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 98 components and 0.0961436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110547Jy sigma=0.000743 ! Fit after self-cal, rms=0.110584Jy sigma=0.000742 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110584Jy sigma=0.000742 ! Fit after self-cal, rms=0.112178Jy sigma=0.000740 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=14.91 mas, bpa=12.91 degrees ! Estimated noise=891.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00099552 Jy ! Component: 100 - total flux cleaned = 0.00110375 Jy ! Component: 150 - total flux cleaned = 0.00110571 Jy ! Component: 200 - total flux cleaned = 0.00110649 Jy ! Total flux subtracted in 200 components = 0.00110649 Jy ! Clean residual min=-0.002284 max=0.002029 Jy/beam ! Clean residual mean=-0.000036 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.09725 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.09725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112155Jy sigma=0.000740 ! Fit after self-cal, rms=0.112251Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168614 Jy ! Component: 100 - total flux cleaned = 0.000108446 Jy ! Component: 150 - total flux cleaned = 2.59938e-05 Jy ! Component: 200 - total flux cleaned = -2.55834e-05 Jy ! Total flux subtracted in 200 components = -2.55834e-05 Jy ! Clean residual min=-0.002400 max=0.002196 Jy/beam ! Clean residual mean=-0.000043 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0972245 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 111 components and 0.0972244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112236Jy sigma=0.000739 ! Fit after self-cal, rms=0.112227Jy sigma=0.000739 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112227Jy sigma=0.000739 ! Fit after self-cal, rms=0.112748Jy sigma=0.000739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=14.88 mas, bpa=12.84 degrees ! Estimated noise=885.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581637 Jy ! Component: 100 - total flux cleaned = 0.000614942 Jy ! Component: 150 - total flux cleaned = 0.000616144 Jy ! Component: 200 - total flux cleaned = 0.000565728 Jy ! Total flux subtracted in 200 components = 0.000565728 Jy ! Clean residual min=-0.002179 max=0.002063 Jy/beam ! Clean residual mean=-0.000028 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0977902 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.0977902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112732Jy sigma=0.000739 ! Fit after self-cal, rms=0.112771Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.25119e-05 Jy ! Component: 100 - total flux cleaned = 6.43445e-06 Jy ! Component: 150 - total flux cleaned = -6.35649e-05 Jy ! Component: 200 - total flux cleaned = -0.000105736 Jy ! Total flux subtracted in 200 components = -0.000105736 Jy ! Clean residual min=-0.002212 max=0.002090 Jy/beam ! Clean residual mean=-0.000031 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0976844 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 118 components and 0.0976844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112760Jy sigma=0.000739 ! Fit after self-cal, rms=0.112753Jy sigma=0.000739 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112753Jy sigma=0.000739 ! Fit after self-cal, rms=0.112553Jy sigma=0.000739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.178 mas, bmaj=27.38 mas, bpa=2.777 degrees ! Estimated noise=1032.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414799 Jy ! Component: 100 - total flux cleaned = 0.000440738 Jy ! Component: 150 - total flux cleaned = 0.000462694 Jy ! Component: 200 - total flux cleaned = 0.000481712 Jy ! Total flux subtracted in 200 components = 0.000481712 Jy ! Clean residual min=-0.002234 max=0.002050 Jy/beam ! Clean residual mean=-0.000048 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0981662 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 119 components and 0.0981662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112549Jy sigma=0.000739 ! Fit after self-cal, rms=0.112560Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.09295e-05 Jy ! Component: 100 - total flux cleaned = -1.26237e-05 Jy ! Component: 150 - total flux cleaned = 4.67758e-06 Jy ! Component: 200 - total flux cleaned = 1.27704e-05 Jy ! Total flux subtracted in 200 components = 1.27704e-05 Jy ! Clean residual min=-0.002259 max=0.002042 Jy/beam ! Clean residual mean=-0.000048 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0981789 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 123 components and 0.0981789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112557Jy sigma=0.000738 ! Fit after self-cal, rms=0.112555Jy sigma=0.000738 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=14.86 mas, bpa=12.8 degrees ! Estimated noise=880.735 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 14.86 at 12.8 degrees (North through East) ! Clean map min=-0.0021152 max=0.069037 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=12.72 mas, bpa=13.91 degrees ! Estimated noise=1643.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525481 Jy ! Component: 100 - total flux cleaned = 0.0722378 Jy ! Component: 150 - total flux cleaned = 0.0830226 Jy ! Component: 200 - total flux cleaned = 0.0893242 Jy ! Total flux subtracted in 200 components = 0.0893242 Jy ! Clean residual min=-0.004306 max=0.004701 Jy/beam ! Clean residual mean=-0.000105 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.0893243 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.0893243 Jy ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=14.86 mas, bpa=12.8 degrees ! Estimated noise=880.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505206 Jy ! Component: 100 - total flux cleaned = 0.00726836 Jy ! Component: 150 - total flux cleaned = 0.00766983 Jy ! Component: 200 - total flux cleaned = 0.00799525 Jy ! Total flux subtracted in 200 components = 0.00799525 Jy ! Clean residual min=-0.002954 max=0.002106 Jy/beam ! Clean residual mean=-0.000036 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0973195 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 81 components and 0.0973196 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.178 mas, bmaj=27.38 mas, bpa=2.777 degrees ! Estimated noise=1032.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820071 Jy ! Component: 100 - total flux cleaned = 0.000843253 Jy ! Component: 150 - total flux cleaned = 0.000865335 Jy ! Component: 200 - total flux cleaned = 0.000885956 Jy ! Total flux subtracted in 200 components = 0.000885956 Jy ! Clean residual min=-0.002407 max=0.002084 Jy/beam ! Clean residual mean=-0.000049 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0982055 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93494e-07 Jy ! Component: 100 - total flux cleaned = 2.25442e-07 Jy ! Component: 150 - total flux cleaned = -1.45266e-05 Jy ! Component: 200 - total flux cleaned = -1.48005e-05 Jy ! Total flux subtracted in 200 components = -1.48005e-05 Jy ! Clean residual min=-0.002370 max=0.002048 Jy/beam ! Clean residual mean=-0.000049 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.0981907 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.0981907 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=14.86 mas, bpa=12.8 degrees ! Estimated noise=880.735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391422 Jy ! Component: 100 - total flux cleaned = -0.000488473 Jy ! Component: 150 - total flux cleaned = -0.000487207 Jy ! Component: 200 - total flux cleaned = -0.000515176 Jy ! Total flux subtracted in 200 components = -0.000515176 Jy ! Clean residual min=-0.002429 max=0.002123 Jy/beam ! Clean residual mean=-0.000032 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0976756 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 100 components and 0.0976756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112567Jy sigma=0.000739 ! Fit after self-cal, rms=0.112553Jy sigma=0.000739 wmodel J0754-3842_S_2014_12_20_pus_map.mod ! Writing 100 model components to file: J0754-3842_S_2014_12_20_pus_map.mod wobs J0754-3842_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0754-3842_S_2014_12_20_pus_uvs.fits wwins J0754-3842_S_2014_12_20_pus_map.win ! wwins: Wrote 1 windows to J0754-3842_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000662944 Jy ! Component: 100 - total flux cleaned = -0.00107443 Jy ! Component: 150 - total flux cleaned = -0.00132168 Jy ! Component: 200 - total flux cleaned = -0.00138995 Jy ! Component: 250 - total flux cleaned = -0.00148913 Jy ! Component: 300 - total flux cleaned = -0.00151999 Jy ! Component: 350 - total flux cleaned = -0.0015811 Jy ! Component: 400 - total flux cleaned = -0.00170117 Jy ! Component: 450 - total flux cleaned = -0.00172966 Jy ! Component: 500 - total flux cleaned = -0.00178696 Jy ! Component: 550 - total flux cleaned = -0.00184281 Jy ! Component: 600 - total flux cleaned = -0.00184262 Jy ! Component: 650 - total flux cleaned = -0.00181636 Jy ! Component: 700 - total flux cleaned = -0.00184261 Jy ! Component: 750 - total flux cleaned = -0.00181653 Jy ! Component: 800 - total flux cleaned = -0.00171698 Jy ! Component: 850 - total flux cleaned = -0.00161978 Jy ! Component: 900 - total flux cleaned = -0.00154857 Jy ! Component: 950 - total flux cleaned = -0.00147854 Jy ! Component: 1000 - total flux cleaned = -0.00147872 Jy ! Component: 1050 - total flux cleaned = -0.00141096 Jy ! Component: 1100 - total flux cleaned = -0.00138905 Jy ! Component: 1150 - total flux cleaned = -0.00138881 Jy ! Component: 1200 - total flux cleaned = -0.00136719 Jy ! Component: 1250 - total flux cleaned = -0.00130412 Jy ! Component: 1300 - total flux cleaned = -0.00130407 Jy ! Component: 1350 - total flux cleaned = -0.00132473 Jy ! Component: 1400 - total flux cleaned = -0.00136497 Jy ! Component: 1450 - total flux cleaned = -0.00136499 Jy ! Component: 1500 - total flux cleaned = -0.00134585 Jy ! Component: 1550 - total flux cleaned = -0.00138435 Jy ! Component: 1600 - total flux cleaned = -0.0014223 Jy ! Component: 1650 - total flux cleaned = -0.00142235 Jy ! Component: 1700 - total flux cleaned = -0.00145928 Jy ! Component: 1750 - total flux cleaned = -0.00151342 Jy ! Component: 1800 - total flux cleaned = -0.00151343 Jy ! Component: 1850 - total flux cleaned = -0.00149538 Jy ! Component: 1900 - total flux cleaned = -0.00149561 Jy ! Component: 1950 - total flux cleaned = -0.00149575 Jy ! Component: 2000 - total flux cleaned = -0.00152987 Jy ! Component: 2050 - total flux cleaned = -0.00158021 Jy ! Component: 2100 - total flux cleaned = -0.00158004 Jy ! Component: 2150 - total flux cleaned = -0.00158018 Jy ! Component: 2200 - total flux cleaned = -0.00158015 Jy ! Component: 2250 - total flux cleaned = -0.00151575 Jy ! Component: 2300 - total flux cleaned = -0.00151581 Jy ! Component: 2350 - total flux cleaned = -0.00145281 Jy ! Component: 2400 - total flux cleaned = -0.00140614 Jy ! Component: 2450 - total flux cleaned = -0.00134464 Jy ! Component: 2500 - total flux cleaned = -0.00126831 Jy ! Component: 2550 - total flux cleaned = -0.0012531 Jy ! Component: 2600 - total flux cleaned = -0.00116318 Jy ! Component: 2650 - total flux cleaned = -0.00107424 Jy ! Component: 2700 - total flux cleaned = -0.00101575 Jy ! Component: 2750 - total flux cleaned = -0.000986574 Jy ! Component: 2800 - total flux cleaned = -0.000900169 Jy ! Component: 2850 - total flux cleaned = -0.000843132 Jy ! Component: 2900 - total flux cleaned = -0.000758356 Jy ! Component: 2950 - total flux cleaned = -0.000688498 Jy ! Component: 3000 - total flux cleaned = -0.000605246 Jy ! Component: 3050 - total flux cleaned = -0.000508898 Jy ! Component: 3100 - total flux cleaned = -0.00048172 Jy ! Component: 3150 - total flux cleaned = -0.000400582 Jy ! Component: 3200 - total flux cleaned = -0.000373649 Jy ! Component: 3250 - total flux cleaned = -0.000293679 Jy ! Component: 3300 - total flux cleaned = -0.000254026 Jy ! Component: 3350 - total flux cleaned = -0.000188376 Jy ! Component: 3400 - total flux cleaned = -9.74606e-05 Jy ! Component: 3450 - total flux cleaned = -5.88538e-05 Jy ! Component: 3500 - total flux cleaned = 4.36955e-05 Jy ! Component: 3550 - total flux cleaned = 0.000119921 Jy ! Component: 3600 - total flux cleaned = 0.000208343 Jy ! Component: 3650 - total flux cleaned = 0.000283592 Jy ! Component: 3700 - total flux cleaned = 0.000345643 Jy ! Component: 3750 - total flux cleaned = 0.000382625 Jy ! Component: 3800 - total flux cleaned = 0.000443943 Jy ! Component: 3850 - total flux cleaned = 0.00057816 Jy ! Component: 3900 - total flux cleaned = 0.000626637 Jy ! Component: 3950 - total flux cleaned = 0.000662913 Jy ! Component: 4000 - total flux cleaned = 0.000734677 Jy ! Component: 4050 - total flux cleaned = 0.000805954 Jy ! Total flux subtracted in 4096 components = 0.000912164 Jy ! Clean residual min=-0.000877 max=0.000665 Jy/beam ! Clean residual mean=-0.000000 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0985877 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 399 components and 0.0985877 Jy ![Exited script file: muppet] wmap "J0754-3842_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 14.86 at 12.8 degrees (North through East) ! Clean map min=-0.0014661 max=0.06885 Jy/beam ! Writing clean map to FITS file: J0754-3842_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0688503 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230925 device "J0754-3842_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0754-3842_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0062 1.0062 2.01241 4.02481 8.04962 16.0992 32.1985 64.397 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 14.86 at 12.8 degrees (North through East) ! Clean map min=-0.0014661 max=0.06885 Jy/beam quit ! Quitting program ! Log file J0754-3842_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:27:24 2016