! Started logfile: J0753+4231_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:51:23 2016 obs J0753+4231_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0753+4231_S_2015_03_17_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.868519 visibilities/baseline/integration-bin. ! Found source: J0753+4231 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 11256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0753+4231_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.729248Jy sigma=0.009064 ! Fit after self-cal, rms=0.695433Jy sigma=0.008692 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=4.104 mas, bpa=-13.35 degrees ! Estimated noise=855.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238474 Jy ! Component: 100 - total flux cleaned = 0.325337 Jy ! Total flux subtracted in 100 components = 0.325337 Jy ! Clean residual min=-0.037603 max=0.133224 Jy/beam ! Clean residual mean=0.000015 rms=0.011293 Jy/beam ! Combined flux in latest and established models = 0.325337 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.325337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226265Jy sigma=0.002588 ! Fit after self-cal, rms=0.225708Jy sigma=0.002585 ! Inverting map ! Added new window around map position (5.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110126 Jy ! Component: 100 - total flux cleaned = 0.157145 Jy ! Total flux subtracted in 100 components = 0.157145 Jy ! Clean residual min=-0.031266 max=0.072527 Jy/beam ! Clean residual mean=-0.000001 rms=0.007026 Jy/beam ! Combined flux in latest and established models = 0.482481 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.482481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157457Jy sigma=0.001770 ! Fit after self-cal, rms=0.138848Jy sigma=0.001543 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0543553 Jy ! Component: 100 - total flux cleaned = 0.081395 Jy ! Total flux subtracted in 100 components = 0.081395 Jy ! Clean residual min=-0.019417 max=0.028157 Jy/beam ! Clean residual mean=-0.000007 rms=0.004213 Jy/beam ! Combined flux in latest and established models = 0.563876 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.563877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110122Jy sigma=0.001223 ! Fit after self-cal, rms=0.106628Jy sigma=0.001178 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224158 Jy ! Component: 100 - total flux cleaned = 0.0303508 Jy ! Total flux subtracted in 100 components = 0.0303508 Jy ! Clean residual min=-0.015331 max=0.019217 Jy/beam ! Clean residual mean=-0.000010 rms=0.003395 Jy/beam ! Combined flux in latest and established models = 0.594227 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.594227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098454Jy sigma=0.001093 ! Fit after self-cal, rms=0.097835Jy sigma=0.001084 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=5.001 mas, bpa=-18.31 degrees ! Estimated noise=555.444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224371 Jy ! Component: 100 - total flux cleaned = 0.0359126 Jy ! Component: 150 - total flux cleaned = 0.0412351 Jy ! Component: 200 - total flux cleaned = 0.0461897 Jy ! Total flux subtracted in 200 components = 0.0461897 Jy ! Clean residual min=-0.011855 max=0.012362 Jy/beam ! Clean residual mean=-0.000030 rms=0.002751 Jy/beam ! Combined flux in latest and established models = 0.640417 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 73 components and 0.640417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090334Jy sigma=0.001009 ! Fit after self-cal, rms=0.090057Jy sigma=0.001005 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 HN 0.98 KP 1.10 ! LA 0.98 MK 1.10 NL 0.90 OV 0.98 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 HN 1.01 KP 1.07 ! LA 0.95 MK 1.17 NL 1.04 OV 1.03 ! PT 1.06 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.01 KP 0.97 ! LA 0.78 MK 1.19 NL 1.18 OV 0.96 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 0.98 KP 0.94 ! LA 0.86 MK 1.22 NL 1.05 OV 1.02 ! PT 1.09 SC 0.98 ! ! ! Fit before self-cal, rms=0.090057Jy sigma=0.001005 ! Fit after self-cal, rms=0.074457Jy sigma=0.000844 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.121 mas, bmaj=5.086 mas, bpa=-16.16 degrees ! Estimated noise=571.128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101712 Jy ! Component: 100 - total flux cleaned = 0.00234109 Jy ! Component: 150 - total flux cleaned = 0.00296388 Jy ! Component: 200 - total flux cleaned = 0.00261662 Jy ! Total flux subtracted in 200 components = 0.00261662 Jy ! Clean residual min=-0.005180 max=0.005567 Jy/beam ! Clean residual mean=-0.000011 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.643034 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.643034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072721Jy sigma=0.000824 ! Fit after self-cal, rms=0.072561Jy sigma=0.000822 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072561Jy sigma=0.000822 ! Fit after self-cal, rms=0.072199Jy sigma=0.000817 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=5.095 mas, bpa=-17.86 degrees ! Estimated noise=569.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000842446 Jy ! Component: 100 - total flux cleaned = 0.000860625 Jy ! Component: 150 - total flux cleaned = 0.000493607 Jy ! Component: 200 - total flux cleaned = 0.000161961 Jy ! Total flux subtracted in 200 components = 0.000161961 Jy ! Clean residual min=-0.003559 max=0.003339 Jy/beam ! Clean residual mean=0.000002 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.643196 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.643196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071674Jy sigma=0.000811 ! Fit after self-cal, rms=0.071658Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410498 Jy ! Component: 100 - total flux cleaned = 0.000310155 Jy ! Component: 150 - total flux cleaned = 0.000122571 Jy ! Component: 200 - total flux cleaned = -5.47115e-05 Jy ! Total flux subtracted in 200 components = -5.47115e-05 Jy ! Clean residual min=-0.003403 max=0.003035 Jy/beam ! Clean residual mean=0.000001 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.643141 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.643141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071392Jy sigma=0.000808 ! Fit after self-cal, rms=0.071375Jy sigma=0.000808 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071375Jy sigma=0.000808 ! Fit after self-cal, rms=0.071425Jy sigma=0.000807 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.103 mas, bmaj=5.099 mas, bpa=-17.45 degrees ! Estimated noise=569.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319418 Jy ! Component: 100 - total flux cleaned = -0.000225223 Jy ! Component: 150 - total flux cleaned = -0.000383101 Jy ! Component: 200 - total flux cleaned = -0.000458592 Jy ! Total flux subtracted in 200 components = -0.000458592 Jy ! Clean residual min=-0.003171 max=0.002970 Jy/beam ! Clean residual mean=0.000001 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.642682 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.642682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071230Jy sigma=0.000805 ! Fit after self-cal, rms=0.071220Jy sigma=0.000805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.55835e-05 Jy ! Component: 100 - total flux cleaned = -0.000152428 Jy ! Component: 150 - total flux cleaned = -0.000280946 Jy ! Component: 200 - total flux cleaned = -0.000342975 Jy ! Total flux subtracted in 200 components = -0.000342975 Jy ! Clean residual min=-0.003055 max=0.002826 Jy/beam ! Clean residual mean=0.000001 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.64234 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.642339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071098Jy sigma=0.000804 ! Fit after self-cal, rms=0.071087Jy sigma=0.000804 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071087Jy sigma=0.000804 ! Fit after self-cal, rms=0.071171Jy sigma=0.000804 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.476 mas, bmaj=8.898 mas, bpa=-11.88 degrees ! Estimated noise=683.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124432 Jy ! Component: 100 - total flux cleaned = -0.00157942 Jy ! Component: 150 - total flux cleaned = -0.00157971 Jy ! Component: 200 - total flux cleaned = -0.00160658 Jy ! Total flux subtracted in 200 components = -0.00160658 Jy ! Clean residual min=-0.002308 max=0.002101 Jy/beam ! Clean residual mean=0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.640733 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.640733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071144Jy sigma=0.000803 ! Fit after self-cal, rms=0.071133Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.98813e-05 Jy ! Component: 100 - total flux cleaned = -7.1806e-05 Jy ! Component: 150 - total flux cleaned = -9.60575e-05 Jy ! Component: 200 - total flux cleaned = -0.000117129 Jy ! Total flux subtracted in 200 components = -0.000117129 Jy ! Clean residual min=-0.002307 max=0.002075 Jy/beam ! Clean residual mean=0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.640616 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 132 components and 0.640616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071119Jy sigma=0.000803 ! Fit after self-cal, rms=0.071108Jy sigma=0.000803 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.113 mas, bmaj=5.103 mas, bpa=-17.19 degrees ! Estimated noise=569.498 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.113 x 5.103 at -17.19 degrees (North through East) ! Clean map min=-0.0027301 max=0.27037 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=4.18 mas, bpa=-11.83 degrees ! Estimated noise=894.311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.274889 Jy ! Component: 100 - total flux cleaned = 0.399614 Jy ! Component: 150 - total flux cleaned = 0.468985 Jy ! Component: 200 - total flux cleaned = 0.511725 Jy ! Total flux subtracted in 200 components = 0.511725 Jy ! Clean residual min=-0.010292 max=0.022386 Jy/beam ! Clean residual mean=-0.000000 rms=0.003242 Jy/beam ! Combined flux in latest and established models = 0.511726 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.511726 Jy ! Inverting map and beam ! Estimated beam: bmin=4.113 mas, bmaj=5.103 mas, bpa=-17.19 degrees ! Estimated noise=569.498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380986 Jy ! Component: 100 - total flux cleaned = 0.0620821 Jy ! Component: 150 - total flux cleaned = 0.078838 Jy ! Component: 200 - total flux cleaned = 0.0910457 Jy ! Total flux subtracted in 200 components = 0.0910457 Jy ! Clean residual min=-0.003901 max=0.007506 Jy/beam ! Clean residual mean=-0.000003 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.602771 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 86 components and 0.602771 Jy ! Inverting map ! Added new window around map position (-1, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00921639 Jy ! Component: 100 - total flux cleaned = 0.0161165 Jy ! Component: 150 - total flux cleaned = 0.0213935 Jy ! Component: 200 - total flux cleaned = 0.0254644 Jy ! Total flux subtracted in 200 components = 0.0254644 Jy ! Clean residual min=-0.002921 max=0.003299 Jy/beam ! Clean residual mean=-0.000000 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.628236 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 125 components and 0.628236 Jy ! Inverting map ! Added new window around map position (11.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345366 Jy ! Component: 100 - total flux cleaned = 0.0061101 Jy ! Component: 150 - total flux cleaned = 0.00753348 Jy ! Component: 200 - total flux cleaned = 0.00854473 Jy ! Total flux subtracted in 200 components = 0.00854473 Jy ! Clean residual min=-0.002582 max=0.002346 Jy/beam ! Clean residual mean=0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.63678 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 152 components and 0.63678 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.476 mas, bmaj=8.898 mas, bpa=-11.88 degrees ! Estimated noise=683.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212872 Jy ! Component: 100 - total flux cleaned = 0.00291124 Jy ! Component: 150 - total flux cleaned = 0.00356708 Jy ! Component: 200 - total flux cleaned = 0.00406144 Jy ! Total flux subtracted in 200 components = 0.00406144 Jy ! Clean residual min=-0.002255 max=0.002004 Jy/beam ! Clean residual mean=0.000003 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.640842 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241904 Jy ! Component: 100 - total flux cleaned = 0.00040309 Jy ! Component: 150 - total flux cleaned = 0.000476877 Jy ! Component: 200 - total flux cleaned = 0.000546126 Jy ! Total flux subtracted in 200 components = 0.000546126 Jy ! Clean residual min=-0.002205 max=0.001996 Jy/beam ! Clean residual mean=0.000003 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.641388 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 183 components and 0.641388 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.113 mas, bmaj=5.103 mas, bpa=-17.19 degrees ! Estimated noise=569.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000537035 Jy ! Component: 100 - total flux cleaned = -0.000389366 Jy ! Component: 150 - total flux cleaned = -0.000343539 Jy ! Component: 200 - total flux cleaned = -0.00025657 Jy ! Total flux subtracted in 200 components = -0.00025657 Jy ! Clean residual min=-0.002162 max=0.002277 Jy/beam ! Clean residual mean=0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.641131 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 200 components and 0.641131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070724Jy sigma=0.000799 ! Fit after self-cal, rms=0.070685Jy sigma=0.000798 wmodel J0753+4231_S_2015_03_17_pus_map.mod ! Writing 200 model components to file: J0753+4231_S_2015_03_17_pus_map.mod wobs J0753+4231_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0753+4231_S_2015_03_17_pus_uvs.fits wwins J0753+4231_S_2015_03_17_pus_map.win ! wwins: Wrote 5 windows to J0753+4231_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436632 Jy ! Component: 100 - total flux cleaned = -0.000756428 Jy ! Component: 150 - total flux cleaned = -0.000757199 Jy ! Component: 200 - total flux cleaned = -0.000628126 Jy ! Component: 250 - total flux cleaned = -0.000566028 Jy ! Component: 300 - total flux cleaned = -0.000535815 Jy ! Component: 350 - total flux cleaned = -0.000417555 Jy ! Component: 400 - total flux cleaned = -0.00038859 Jy ! Component: 450 - total flux cleaned = -0.000331113 Jy ! Component: 500 - total flux cleaned = -0.000274915 Jy ! Component: 550 - total flux cleaned = -0.000274856 Jy ! Component: 600 - total flux cleaned = -0.000247558 Jy ! Component: 650 - total flux cleaned = -0.000220935 Jy ! Component: 700 - total flux cleaned = -0.00019506 Jy ! Component: 750 - total flux cleaned = -0.00027119 Jy ! Component: 800 - total flux cleaned = -0.000346373 Jy ! Component: 850 - total flux cleaned = -0.000445425 Jy ! Component: 900 - total flux cleaned = -0.000615105 Jy ! Component: 950 - total flux cleaned = -0.000662653 Jy ! Component: 1000 - total flux cleaned = -0.000780068 Jy ! Component: 1050 - total flux cleaned = -0.000803197 Jy ! Component: 1100 - total flux cleaned = -0.000780232 Jy ! Component: 1150 - total flux cleaned = -0.000916118 Jy ! Component: 1200 - total flux cleaned = -0.000915845 Jy ! Component: 1250 - total flux cleaned = -0.000938214 Jy ! Component: 1300 - total flux cleaned = -0.000960213 Jy ! Component: 1350 - total flux cleaned = -0.00106822 Jy ! Component: 1400 - total flux cleaned = -0.00106795 Jy ! Component: 1450 - total flux cleaned = -0.00106784 Jy ! Component: 1500 - total flux cleaned = -0.0010676 Jy ! Component: 1550 - total flux cleaned = -0.00112951 Jy ! Component: 1600 - total flux cleaned = -0.00110872 Jy ! Component: 1650 - total flux cleaned = -0.00112878 Jy ! Component: 1700 - total flux cleaned = -0.00110864 Jy ! Component: 1750 - total flux cleaned = -0.00108874 Jy ! Component: 1800 - total flux cleaned = -0.00110812 Jy ! Component: 1850 - total flux cleaned = -0.00108872 Jy ! Component: 1900 - total flux cleaned = -0.00108867 Jy ! Component: 1950 - total flux cleaned = -0.000974356 Jy ! Component: 2000 - total flux cleaned = -0.00106884 Jy ! Component: 2050 - total flux cleaned = -0.000993993 Jy ! Component: 2100 - total flux cleaned = -0.000994264 Jy ! Component: 2150 - total flux cleaned = -0.00106801 Jy ! Component: 2200 - total flux cleaned = -0.000995477 Jy ! Component: 2250 - total flux cleaned = -0.00104985 Jy ! Component: 2300 - total flux cleaned = -0.00103199 Jy ! Component: 2350 - total flux cleaned = -0.00108511 Jy ! Component: 2400 - total flux cleaned = -0.00103269 Jy ! Component: 2450 - total flux cleaned = -0.00108478 Jy ! Component: 2500 - total flux cleaned = -0.00103322 Jy ! Component: 2550 - total flux cleaned = -0.0010504 Jy ! Component: 2600 - total flux cleaned = -0.00108406 Jy ! Component: 2650 - total flux cleaned = -0.00113428 Jy ! Component: 2700 - total flux cleaned = -0.00118407 Jy ! Component: 2750 - total flux cleaned = -0.001184 Jy ! Component: 2800 - total flux cleaned = -0.00121687 Jy ! Component: 2850 - total flux cleaned = -0.00123324 Jy ! Component: 2900 - total flux cleaned = -0.00123318 Jy ! Component: 2950 - total flux cleaned = -0.00129718 Jy ! Component: 3000 - total flux cleaned = -0.00131296 Jy ! Component: 3050 - total flux cleaned = -0.00136032 Jy ! Component: 3100 - total flux cleaned = -0.00140719 Jy ! Component: 3150 - total flux cleaned = -0.00142293 Jy ! Component: 3200 - total flux cleaned = -0.00151523 Jy ! Component: 3250 - total flux cleaned = -0.00157618 Jy ! Component: 3300 - total flux cleaned = -0.0015915 Jy ! Component: 3350 - total flux cleaned = -0.0016969 Jy ! Component: 3400 - total flux cleaned = -0.00174162 Jy ! Component: 3450 - total flux cleaned = -0.00172688 Jy ! Component: 3500 - total flux cleaned = -0.00181536 Jy ! Component: 3550 - total flux cleaned = -0.00181523 Jy ! Component: 3600 - total flux cleaned = -0.00191683 Jy ! Component: 3650 - total flux cleaned = -0.00194564 Jy ! Component: 3700 - total flux cleaned = -0.00195995 Jy ! Component: 3750 - total flux cleaned = -0.00201686 Jy ! Component: 3800 - total flux cleaned = -0.00205918 Jy ! Component: 3850 - total flux cleaned = -0.0021012 Jy ! Component: 3900 - total flux cleaned = -0.00212903 Jy ! Component: 3950 - total flux cleaned = -0.00221192 Jy ! Component: 4000 - total flux cleaned = -0.0022531 Jy ! Component: 4050 - total flux cleaned = -0.00229396 Jy ! Total flux subtracted in 4096 components = -0.00230757 Jy ! Clean residual min=-0.000779 max=0.000718 Jy/beam ! Clean residual mean=-0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.638824 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 481 components and 0.638824 Jy ![Exited script file: muppet] wmap "J0753+4231_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.113 x 5.103 at -17.19 degrees (North through East) ! Clean map min=-0.0016951 max=0.27465 Jy/beam ! Writing clean map to FITS file: J0753+4231_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.274653 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024831 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.271226 0.271226 0.542452 1.0849 2.16981 4.33962 8.67923 17.3585 34.7169 69.4338 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.274 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.113 x 5.103 at -17.19 degrees (North through East) ! Clean map min=-0.0016951 max=0.27465 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0753+4231_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:51:29 2016