! Started logfile: J0751+6840_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:21:32 2016
obs J0751+6840_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0751+6840_S_2014_08_05_pus_uva.fits
! AN table 1: 102 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.761438 visibilities/baseline/integration-bin.
! Found source: J0751+6840
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 13980 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0751+6840_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.919203Jy  sigma=0.009789
! Fit after  self-cal, rms=0.891566Jy  sigma=0.009512
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.396 mas, bmaj=9.514 mas, bpa=69.07 degrees
! Estimated noise=1027.67 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0859662 Jy
! Component: 100  -  total flux cleaned = 0.104737 Jy
! Total flux subtracted in 100 components = 0.104737 Jy
! Clean residual min=-0.004118 max=0.005469 Jy/beam
! Clean residual mean=-0.000010 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.104737 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.104737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079583Jy  sigma=0.000782
! Fit after  self-cal, rms=0.079578Jy  sigma=0.000782
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.205 mas, bmaj=10.22 mas, bpa=69.54 degrees
! Estimated noise=570.609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00608111 Jy
! Component: 100  -  total flux cleaned = 0.00907074 Jy
! Component: 150  -  total flux cleaned = 0.0108613 Jy
! Component: 200  -  total flux cleaned = 0.0119833 Jy
! Total flux subtracted in 200 components = 0.0119833 Jy
! Clean residual min=-0.002276 max=0.002307 Jy/beam
! Clean residual mean=0.000001 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.116721 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 36 components and 0.116721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079020Jy  sigma=0.000778
! Fit after  self-cal, rms=0.079011Jy  sigma=0.000778
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.87     HN        0.98     KP        1.05     
!   LA        1.11     MK        1.00*    NL        0.97     OV        0.99     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.02     KP        0.99     
!   LA        1.08     MK        1.00*    NL        1.01     OV        1.04     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.14     HN        1.03     KP        0.90     
!   LA        0.83     MK        1.00*    NL        1.00     OV        0.97     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.03     HN        1.03     KP        0.86     
!   LA        0.79     MK        1.00*    NL        1.04     OV        1.00     
!   PT        1.06     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.079011Jy  sigma=0.000778
! Fit after  self-cal, rms=0.076355Jy  sigma=0.000768
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.216 mas, bmaj=10.25 mas, bpa=69.46 degrees
! Estimated noise=570.377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000631611 Jy
! Component: 100  -  total flux cleaned = -0.000838125 Jy
! Component: 150  -  total flux cleaned = -0.000862231 Jy
! Component: 200  -  total flux cleaned = -0.000884345 Jy
! Total flux subtracted in 200 components = -0.000884345 Jy
! Clean residual min=-0.001781 max=0.002010 Jy/beam
! Clean residual mean=0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.115836 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.115836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076349Jy  sigma=0.000768
! Fit after  self-cal, rms=0.076328Jy  sigma=0.000768
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076328Jy  sigma=0.000768
! Fit after  self-cal, rms=0.076653Jy  sigma=0.000767
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.21 mas, bmaj=10.28 mas, bpa=69.38 degrees
! Estimated noise=570.152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00050282 Jy
! Component: 100  -  total flux cleaned = -0.000606329 Jy
! Component: 150  -  total flux cleaned = -0.000676563 Jy
! Component: 200  -  total flux cleaned = -0.000715293 Jy
! Total flux subtracted in 200 components = -0.000715293 Jy
! Clean residual min=-0.001607 max=0.001855 Jy/beam
! Clean residual mean=0.000000 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.115121 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.115121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076648Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076658Jy  sigma=0.000767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (90.5, 45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000907428 Jy
! Component: 100  -  total flux cleaned = 0.000963204 Jy
! Component: 150  -  total flux cleaned = 0.000991667 Jy
! Component: 200  -  total flux cleaned = 0.00101156 Jy
! Total flux subtracted in 200 components = 0.00101156 Jy
! Clean residual min=-0.001446 max=0.001572 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.116133 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 92 components and 0.116133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076623Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076619Jy  sigma=0.000767
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076619Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076653Jy  sigma=0.000767
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.21 mas, bmaj=10.29 mas, bpa=69.37 degrees
! Estimated noise=569.6 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192047 Jy
! Component: 100  -  total flux cleaned = 0.000102909 Jy
! Component: 150  -  total flux cleaned = 3.94754e-05 Jy
! Component: 200  -  total flux cleaned = -3.24119e-05 Jy
! Total flux subtracted in 200 components = -3.24119e-05 Jy
! Clean residual min=-0.001418 max=0.001533 Jy/beam
! Clean residual mean=-0.000000 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.1161 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 109 components and 0.1161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076646Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076648Jy  sigma=0.000767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.63469e-06 Jy
! Component: 100  -  total flux cleaned = -1.45547e-05 Jy
! Component: 150  -  total flux cleaned = -3.81108e-05 Jy
! Component: 200  -  total flux cleaned = -3.88664e-05 Jy
! Total flux subtracted in 200 components = -3.88664e-05 Jy
! Clean residual min=-0.001415 max=0.001520 Jy/beam
! Clean residual mean=-0.000000 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.116061 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 123 components and 0.116061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076644Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076644Jy  sigma=0.000767
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076644Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076691Jy  sigma=0.000767
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.705 mas, bmaj=12.19 mas, bpa=74.12 degrees
! Estimated noise=656.776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242873 Jy
! Component: 100  -  total flux cleaned = 0.000307434 Jy
! Component: 150  -  total flux cleaned = 0.000349168 Jy
! Component: 200  -  total flux cleaned = 0.000330468 Jy
! Total flux subtracted in 200 components = 0.000330468 Jy
! Clean residual min=-0.001471 max=0.001765 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.116392 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 144 components and 0.116392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076689Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076689Jy  sigma=0.000767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.34006e-05 Jy
! Component: 100  -  total flux cleaned = 6.14037e-05 Jy
! Component: 150  -  total flux cleaned = 6.95304e-05 Jy
! Component: 200  -  total flux cleaned = 6.94541e-05 Jy
! Total flux subtracted in 200 components = 6.94541e-05 Jy
! Clean residual min=-0.001496 max=0.001741 Jy/beam
! Clean residual mean=-0.000002 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.116461 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 149 components and 0.116461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076688Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076688Jy  sigma=0.000767
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.211 mas, bmaj=10.3 mas, bpa=69.37 degrees
! Estimated noise=569.593 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.211 x 10.3 at 69.37 degrees (North through East)
! Clean map  min=-0.0014052  max=0.1101 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.392 mas, bmaj=9.597 mas, bpa=68.94 degrees
! Estimated noise=1027.61 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0858908 Jy
! Component: 100  -  total flux cleaned = 0.104691 Jy
! Component: 150  -  total flux cleaned = 0.109789 Jy
! Component: 200  -  total flux cleaned = 0.1118 Jy
! Total flux subtracted in 200 components = 0.1118 Jy
! Clean residual min=-0.002654 max=0.002786 Jy/beam
! Clean residual mean=-0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.1118 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.1118 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.211 mas, bmaj=10.3 mas, bpa=69.37 degrees
! Estimated noise=569.593 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199419 Jy
! Component: 100  -  total flux cleaned = 0.00284639 Jy
! Component: 150  -  total flux cleaned = 0.00315586 Jy
! Component: 200  -  total flux cleaned = 0.00337785 Jy
! Total flux subtracted in 200 components = 0.00337785 Jy
! Clean residual min=-0.001486 max=0.001590 Jy/beam
! Clean residual mean=-0.000002 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.115178 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 0.115178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.705 mas, bmaj=12.19 mas, bpa=74.12 degrees
! Estimated noise=656.776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000600653 Jy
! Component: 100  -  total flux cleaned = 0.000836802 Jy
! Component: 150  -  total flux cleaned = 0.000981403 Jy
! Component: 200  -  total flux cleaned = 0.00107046 Jy
! Total flux subtracted in 200 components = 0.00107046 Jy
! Clean residual min=-0.001530 max=0.001748 Jy/beam
! Clean residual mean=-0.000002 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.116248 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.3288e-05 Jy
! Component: 100  -  total flux cleaned = 4.93577e-05 Jy
! Component: 150  -  total flux cleaned = 8.35821e-05 Jy
! Component: 200  -  total flux cleaned = 0.000115118 Jy
! Total flux subtracted in 200 components = 0.000115118 Jy
! Clean residual min=-0.001523 max=0.001739 Jy/beam
! Clean residual mean=-0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.116364 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 83 components and 0.116364 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.211 mas, bmaj=10.3 mas, bpa=69.37 degrees
! Estimated noise=569.593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000316619 Jy
! Component: 100  -  total flux cleaned = -0.000378168 Jy
! Component: 150  -  total flux cleaned = -0.000328114 Jy
! Component: 200  -  total flux cleaned = -0.000297324 Jy
! Total flux subtracted in 200 components = -0.000297324 Jy
! Clean residual min=-0.001424 max=0.001512 Jy/beam
! Clean residual mean=-0.000000 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.116066 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 102 components and 0.116066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076700Jy  sigma=0.000767
! Fit after  self-cal, rms=0.076700Jy  sigma=0.000767
wmodel J0751+6840_S_2014_08_05_pus_map.mod
! Writing 102 model components to file: J0751+6840_S_2014_08_05_pus_map.mod
wobs J0751+6840_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0751+6840_S_2014_08_05_pus_uvs.fits
wwins J0751+6840_S_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J0751+6840_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474211 Jy
! Component: 100  -  total flux cleaned = 0.000753982 Jy
! Component: 150  -  total flux cleaned = 0.00104208 Jy
! Component: 200  -  total flux cleaned = 0.00129398 Jy
! Component: 250  -  total flux cleaned = 0.0013824 Jy
! Component: 300  -  total flux cleaned = 0.00146601 Jy
! Component: 350  -  total flux cleaned = 0.00150641 Jy
! Component: 400  -  total flux cleaned = 0.00158468 Jy
! Component: 450  -  total flux cleaned = 0.00162279 Jy
! Component: 500  -  total flux cleaned = 0.00160433 Jy
! Component: 550  -  total flux cleaned = 0.00162212 Jy
! Component: 600  -  total flux cleaned = 0.00162221 Jy
! Component: 650  -  total flux cleaned = 0.00162237 Jy
! Component: 700  -  total flux cleaned = 0.00165621 Jy
! Component: 750  -  total flux cleaned = 0.00162276 Jy
! Component: 800  -  total flux cleaned = 0.00162298 Jy
! Component: 850  -  total flux cleaned = 0.00163926 Jy
! Component: 900  -  total flux cleaned = 0.00170282 Jy
! Component: 950  -  total flux cleaned = 0.00167129 Jy
! Component: 1000  -  total flux cleaned = 0.00162534 Jy
! Component: 1050  -  total flux cleaned = 0.00167121 Jy
! Component: 1100  -  total flux cleaned = 0.00167105 Jy
! Component: 1150  -  total flux cleaned = 0.00167101 Jy
! Component: 1200  -  total flux cleaned = 0.00168555 Jy
! Component: 1250  -  total flux cleaned = 0.00168558 Jy
! Component: 1300  -  total flux cleaned = 0.00171394 Jy
! Component: 1350  -  total flux cleaned = 0.00172789 Jy
! Component: 1400  -  total flux cleaned = 0.00170042 Jy
! Component: 1450  -  total flux cleaned = 0.00171424 Jy
! Component: 1500  -  total flux cleaned = 0.00176815 Jy
! Component: 1550  -  total flux cleaned = 0.00174152 Jy
! Component: 1600  -  total flux cleaned = 0.00178108 Jy
! Component: 1650  -  total flux cleaned = 0.00179425 Jy
! Component: 1700  -  total flux cleaned = 0.00183283 Jy
! Component: 1750  -  total flux cleaned = 0.00179458 Jy
! Component: 1800  -  total flux cleaned = 0.001845 Jy
! Component: 1850  -  total flux cleaned = 0.00184484 Jy
! Component: 1900  -  total flux cleaned = 0.00186936 Jy
! Component: 1950  -  total flux cleaned = 0.00184482 Jy
! Component: 2000  -  total flux cleaned = 0.00185673 Jy
! Component: 2050  -  total flux cleaned = 0.00184482 Jy
! Component: 2100  -  total flux cleaned = 0.00189241 Jy
! Component: 2150  -  total flux cleaned = 0.00191584 Jy
! Component: 2200  -  total flux cleaned = 0.00190422 Jy
! Component: 2250  -  total flux cleaned = 0.00191598 Jy
! Component: 2300  -  total flux cleaned = 0.0019846 Jy
! Component: 2350  -  total flux cleaned = 0.00193933 Jy
! Component: 2400  -  total flux cleaned = 0.00196167 Jy
! Component: 2450  -  total flux cleaned = 0.00198397 Jy
! Component: 2500  -  total flux cleaned = 0.00205017 Jy
! Component: 2550  -  total flux cleaned = 0.00207195 Jy
! Component: 2600  -  total flux cleaned = 0.00207201 Jy
! Component: 2650  -  total flux cleaned = 0.00208268 Jy
! Component: 2700  -  total flux cleaned = 0.00207194 Jy
! Component: 2750  -  total flux cleaned = 0.00205062 Jy
! Component: 2800  -  total flux cleaned = 0.00200848 Jy
! Component: 2850  -  total flux cleaned = 0.00202945 Jy
! Component: 2900  -  total flux cleaned = 0.00200863 Jy
! Component: 2950  -  total flux cleaned = 0.00199831 Jy
! Component: 3000  -  total flux cleaned = 0.00199819 Jy
! Component: 3050  -  total flux cleaned = 0.00199818 Jy
! Component: 3100  -  total flux cleaned = 0.00196775 Jy
! Component: 3150  -  total flux cleaned = 0.00198781 Jy
! Component: 3200  -  total flux cleaned = 0.00193797 Jy
! Component: 3250  -  total flux cleaned = 0.00196771 Jy
! Component: 3300  -  total flux cleaned = 0.00192827 Jy
! Component: 3350  -  total flux cleaned = 0.00191842 Jy
! Component: 3400  -  total flux cleaned = 0.00192814 Jy
! Component: 3450  -  total flux cleaned = 0.00187983 Jy
! Component: 3500  -  total flux cleaned = 0.00188945 Jy
! Component: 3550  -  total flux cleaned = 0.00188937 Jy
! Component: 3600  -  total flux cleaned = 0.00187043 Jy
! Component: 3650  -  total flux cleaned = 0.00181379 Jy
! Component: 3700  -  total flux cleaned = 0.00183268 Jy
! Component: 3750  -  total flux cleaned = 0.00186063 Jy
! Component: 3800  -  total flux cleaned = 0.00184207 Jy
! Component: 3850  -  total flux cleaned = 0.00184207 Jy
! Component: 3900  -  total flux cleaned = 0.00177786 Jy
! Component: 3950  -  total flux cleaned = 0.00178699 Jy
! Component: 4000  -  total flux cleaned = 0.001787 Jy
! Component: 4050  -  total flux cleaned = 0.00176897 Jy
! Total flux subtracted in 4096 components = 0.00172412 Jy
! Clean residual min=-0.000547 max=0.000509 Jy/beam
! Clean residual mean=0.000003 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.11779 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 400 components and 0.11779 Jy
![Exited script file: muppet]
wmap "J0751+6840_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.211 x 10.3 at 69.37 degrees (North through East)
! Clean map  min=-0.0012846  max=0.11031 Jy/beam
! Writing clean map to FITS file: J0751+6840_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.110309 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000171793 
device "J0751+6840_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0751+6840_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.467215 0.467215 0.934429 1.86886 3.73772 7.47543 14.9509 29.9017 59.8035
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.11 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.211 x 10.3 at 69.37 degrees (North through East)
! Clean map  min=-0.0012846  max=0.11031 Jy/beam
quit
! Quitting program
! Log file J0751+6840_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:21:37 2016