! Started logfile: J0747-3310_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:20:51 2017 obs J0747-3310_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0747-3310_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0747-3310 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0747-3310_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.746259Jy sigma=0.007751 ! Fit after self-cal, rms=0.719369Jy sigma=0.007340 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=5.793 mas, bpa=-6.27 degrees ! Estimated noise=1557.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218052 Jy ! Component: 100 - total flux cleaned = 0.321717 Jy ! Total flux subtracted in 100 components = 0.321717 Jy ! Clean residual min=-0.026540 max=0.054605 Jy/beam ! Clean residual mean=-0.000432 rms=0.010486 Jy/beam ! Combined flux in latest and established models = 0.321717 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.321717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179135Jy sigma=0.001820 ! Fit after self-cal, rms=0.178865Jy sigma=0.001817 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.014 mas, bpa=-5.654 degrees ! Estimated noise=825.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0943271 Jy ! Component: 100 - total flux cleaned = 0.141418 Jy ! Component: 150 - total flux cleaned = 0.166139 Jy ! Component: 200 - total flux cleaned = 0.1793 Jy ! Total flux subtracted in 200 components = 0.1793 Jy ! Clean residual min=-0.021247 max=0.037470 Jy/beam ! Clean residual mean=-0.000265 rms=0.008127 Jy/beam ! Combined flux in latest and established models = 0.501018 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 61 components and 0.501018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123451Jy sigma=0.001295 ! Fit after self-cal, rms=0.123259Jy sigma=0.001294 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.96 ! MK 1.18 NL 1.07 OV 0.90 PT 0.96 ! SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 1.00* KP 1.00* LA 0.93 ! MK 1.09 NL 1.15 OV 0.93 PT 0.90 ! SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.76 ! MK 1.05 NL 1.11 OV 0.87 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.81 ! MK 0.94 NL 1.14 OV 0.92 PT 0.91 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.123259Jy sigma=0.001294 ! Fit after self-cal, rms=0.110696Jy sigma=0.001052 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.139 mas, bpa=-5.298 degrees ! Estimated noise=837.975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166668 Jy ! Component: 100 - total flux cleaned = 0.00152526 Jy ! Component: 150 - total flux cleaned = 0.00141429 Jy ! Component: 200 - total flux cleaned = 0.0015187 Jy ! Total flux subtracted in 200 components = 0.0015187 Jy ! Clean residual min=-0.014452 max=0.016550 Jy/beam ! Clean residual mean=0.000287 rms=0.004349 Jy/beam ! Combined flux in latest and established models = 0.502536 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.502536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110255Jy sigma=0.001051 ! Fit after self-cal, rms=0.109867Jy sigma=0.001049 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109867Jy sigma=0.001049 ! Fit after self-cal, rms=0.108896Jy sigma=0.000990 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.153 mas, bpa=-5.1 degrees ! Estimated noise=855.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476357 Jy ! Component: 100 - total flux cleaned = 0.00499245 Jy ! Component: 150 - total flux cleaned = 0.00531424 Jy ! Component: 200 - total flux cleaned = 0.00561882 Jy ! Total flux subtracted in 200 components = 0.00561882 Jy ! Clean residual min=-0.011468 max=0.015324 Jy/beam ! Clean residual mean=0.000200 rms=0.003283 Jy/beam ! Combined flux in latest and established models = 0.508155 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.508155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108448Jy sigma=0.000987 ! Fit after self-cal, rms=0.108388Jy sigma=0.000987 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131912 Jy ! Component: 100 - total flux cleaned = 0.0143686 Jy ! Component: 150 - total flux cleaned = 0.0137273 Jy ! Component: 200 - total flux cleaned = 0.0131601 Jy ! Total flux subtracted in 200 components = 0.0131601 Jy ! Clean residual min=-0.010839 max=0.013577 Jy/beam ! Clean residual mean=0.000219 rms=0.002907 Jy/beam ! Combined flux in latest and established models = 0.521315 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.521315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106125Jy sigma=0.000972 ! Fit after self-cal, rms=0.105818Jy sigma=0.000970 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105818Jy sigma=0.000970 ! Fit after self-cal, rms=0.101473Jy sigma=0.000938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=7.091 mas, bpa=-4.983 degrees ! Estimated noise=845.354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059512 Jy ! Component: 100 - total flux cleaned = 0.00579082 Jy ! Component: 150 - total flux cleaned = 0.00520669 Jy ! Component: 200 - total flux cleaned = 0.00482205 Jy ! Total flux subtracted in 200 components = 0.00482205 Jy ! Clean residual min=-0.007179 max=0.011076 Jy/beam ! Clean residual mean=0.000035 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 0.526137 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.526137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100758Jy sigma=0.000933 ! Fit after self-cal, rms=0.100667Jy sigma=0.000932 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933331 Jy ! Component: 100 - total flux cleaned = 0.013889 Jy ! Component: 150 - total flux cleaned = 0.0166315 Jy ! Component: 200 - total flux cleaned = 0.0172704 Jy ! Total flux subtracted in 200 components = 0.0172704 Jy ! Clean residual min=-0.006266 max=0.005441 Jy/beam ! Clean residual mean=0.000040 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.543408 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 142 components and 0.543408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099721Jy sigma=0.000923 ! Fit after self-cal, rms=0.099620Jy sigma=0.000922 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099620Jy sigma=0.000922 ! Fit after self-cal, rms=0.098188Jy sigma=0.000921 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.928 mas, bmaj=22.29 mas, bpa=-1.402 degrees ! Estimated noise=1018.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323526 Jy ! Component: 100 - total flux cleaned = 0.00389824 Jy ! Component: 150 - total flux cleaned = 0.00429356 Jy ! Component: 200 - total flux cleaned = 0.00434912 Jy ! Total flux subtracted in 200 components = 0.00434912 Jy ! Clean residual min=-0.007439 max=0.005344 Jy/beam ! Clean residual mean=0.000091 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.547757 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 156 components and 0.547757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098101Jy sigma=0.000920 ! Fit after self-cal, rms=0.098068Jy sigma=0.000920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590243 Jy ! Component: 100 - total flux cleaned = 0.000641036 Jy ! Component: 150 - total flux cleaned = 0.00054562 Jy ! Component: 200 - total flux cleaned = 0.000411465 Jy ! Total flux subtracted in 200 components = 0.000411465 Jy ! Clean residual min=-0.007237 max=0.005120 Jy/beam ! Clean residual mean=0.000090 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.548168 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 161 components and 0.548168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098033Jy sigma=0.000920 ! Fit after self-cal, rms=0.098027Jy sigma=0.000920 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.067 mas, bpa=-4.896 degrees ! Estimated noise=839.421 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.067 at -4.896 degrees (North through East) ! Clean map min=-0.0067477 max=0.29975 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.394 mas, bmaj=5.821 mas, bpa=-5.561 degrees ! Estimated noise=1587.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220862 Jy ! Component: 100 - total flux cleaned = 0.325582 Jy ! Component: 150 - total flux cleaned = 0.391057 Jy ! Component: 200 - total flux cleaned = 0.4335 Jy ! Total flux subtracted in 200 components = 0.4335 Jy ! Clean residual min=-0.014585 max=0.023680 Jy/beam ! Clean residual mean=-0.000152 rms=0.004513 Jy/beam ! Combined flux in latest and established models = 0.4335 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.4335 Jy ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.067 mas, bpa=-4.896 degrees ! Estimated noise=839.421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0404718 Jy ! Component: 100 - total flux cleaned = 0.0618542 Jy ! Component: 150 - total flux cleaned = 0.0754457 Jy ! Component: 200 - total flux cleaned = 0.085489 Jy ! Total flux subtracted in 200 components = 0.085489 Jy ! Clean residual min=-0.007745 max=0.008180 Jy/beam ! Clean residual mean=0.000025 rms=0.002013 Jy/beam ! Combined flux in latest and established models = 0.518989 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 92 components and 0.518988 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.928 mas, bmaj=22.29 mas, bpa=-1.402 degrees ! Estimated noise=1018.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125005 Jy ! Component: 100 - total flux cleaned = 0.0199618 Jy ! Component: 150 - total flux cleaned = 0.0245659 Jy ! Component: 200 - total flux cleaned = 0.0266564 Jy ! Total flux subtracted in 200 components = 0.0266564 Jy ! Clean residual min=-0.007762 max=0.005524 Jy/beam ! Clean residual mean=0.000102 rms=0.001944 Jy/beam ! Combined flux in latest and established models = 0.545645 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470382 Jy ! Component: 100 - total flux cleaned = 0.000951709 Jy ! Component: 150 - total flux cleaned = 0.00136749 Jy ! Component: 200 - total flux cleaned = 0.00172644 Jy ! Total flux subtracted in 200 components = 0.00172644 Jy ! Clean residual min=-0.007376 max=0.005184 Jy/beam ! Clean residual mean=0.000096 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 0.547371 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 126 components and 0.547371 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.067 mas, bpa=-4.896 degrees ! Estimated noise=839.421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133765 Jy ! Component: 100 - total flux cleaned = 0.000992714 Jy ! Component: 150 - total flux cleaned = 0.000684239 Jy ! Component: 200 - total flux cleaned = 0.000497111 Jy ! Total flux subtracted in 200 components = 0.000497111 Jy ! Clean residual min=-0.005423 max=0.004311 Jy/beam ! Clean residual mean=0.000045 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.547868 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 153 components and 0.547868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097820Jy sigma=0.000920 ! Fit after self-cal, rms=0.097736Jy sigma=0.000920 wmodel J0747-3310_S_2014_01_04_pus_map.mod ! Writing 153 model components to file: J0747-3310_S_2014_01_04_pus_map.mod wobs J0747-3310_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0747-3310_S_2014_01_04_pus_uvs.fits wwins J0747-3310_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0747-3310_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00227826 Jy ! Component: 100 - total flux cleaned = -0.00380486 Jy ! Component: 150 - total flux cleaned = -0.00483025 Jy ! Component: 200 - total flux cleaned = -0.00523674 Jy ! Component: 250 - total flux cleaned = -0.0051102 Jy ! Component: 300 - total flux cleaned = -0.00492896 Jy ! Component: 350 - total flux cleaned = -0.00487281 Jy ! Component: 400 - total flux cleaned = -0.00487359 Jy ! Component: 450 - total flux cleaned = -0.00471272 Jy ! Component: 500 - total flux cleaned = -0.00466113 Jy ! Component: 550 - total flux cleaned = -0.0045112 Jy ! Component: 600 - total flux cleaned = -0.00441555 Jy ! Component: 650 - total flux cleaned = -0.00436906 Jy ! Component: 700 - total flux cleaned = -0.00427763 Jy ! Component: 750 - total flux cleaned = -0.00423335 Jy ! Component: 800 - total flux cleaned = -0.00406347 Jy ! Component: 850 - total flux cleaned = -0.0040634 Jy ! Component: 900 - total flux cleaned = -0.00394254 Jy ! Component: 950 - total flux cleaned = -0.00378618 Jy ! Component: 1000 - total flux cleaned = -0.00367205 Jy ! Component: 1050 - total flux cleaned = -0.00363458 Jy ! Component: 1100 - total flux cleaned = -0.00349037 Jy ! Component: 1150 - total flux cleaned = -0.00338474 Jy ! Component: 1200 - total flux cleaned = -0.00331535 Jy ! Component: 1250 - total flux cleaned = -0.00324817 Jy ! Component: 1300 - total flux cleaned = -0.00314896 Jy ! Component: 1350 - total flux cleaned = -0.0029223 Jy ! Component: 1400 - total flux cleaned = -0.00273241 Jy ! Component: 1450 - total flux cleaned = -0.00260801 Jy ! Component: 1500 - total flux cleaned = -0.0024246 Jy ! Component: 1550 - total flux cleaned = -0.0021553 Jy ! Component: 1600 - total flux cleaned = -0.00189174 Jy ! Component: 1650 - total flux cleaned = -0.00183424 Jy ! Component: 1700 - total flux cleaned = -0.00160796 Jy ! Component: 1750 - total flux cleaned = -0.00146925 Jy ! Component: 1800 - total flux cleaned = -0.00130553 Jy ! Component: 1850 - total flux cleaned = -0.0010375 Jy ! Component: 1900 - total flux cleaned = -0.000932729 Jy ! Component: 1950 - total flux cleaned = -0.000725495 Jy ! Component: 2000 - total flux cleaned = -0.000674377 Jy ! Component: 2050 - total flux cleaned = -0.000423238 Jy ! Component: 2100 - total flux cleaned = -0.000299587 Jy ! Component: 2150 - total flux cleaned = -0.000201731 Jy ! Component: 2200 - total flux cleaned = -9.84656e-06 Jy ! Component: 2250 - total flux cleaned = 0.000108003 Jy ! Component: 2300 - total flux cleaned = 0.000317321 Jy ! Component: 2350 - total flux cleaned = 0.00040884 Jy ! Component: 2400 - total flux cleaned = 0.000544512 Jy ! Component: 2450 - total flux cleaned = 0.000700817 Jy ! Component: 2500 - total flux cleaned = 0.000767111 Jy ! Component: 2550 - total flux cleaned = 0.000810832 Jy ! Component: 2600 - total flux cleaned = 0.000897251 Jy ! Component: 2650 - total flux cleaned = 0.000939887 Jy ! Component: 2700 - total flux cleaned = 0.00104542 Jy ! Component: 2750 - total flux cleaned = 0.00117054 Jy ! Component: 2800 - total flux cleaned = 0.00123221 Jy ! Component: 2850 - total flux cleaned = 0.00133421 Jy ! Component: 2900 - total flux cleaned = 0.00141467 Jy ! Component: 2950 - total flux cleaned = 0.0015341 Jy ! Component: 3000 - total flux cleaned = 0.00159319 Jy ! Component: 3050 - total flux cleaned = 0.00169073 Jy ! Component: 3100 - total flux cleaned = 0.00178737 Jy ! Component: 3150 - total flux cleaned = 0.00182577 Jy ! Component: 3200 - total flux cleaned = 0.00193959 Jy ! Component: 3250 - total flux cleaned = 0.00197726 Jy ! Component: 3300 - total flux cleaned = 0.00201471 Jy ! Component: 3350 - total flux cleaned = 0.00208877 Jy ! Component: 3400 - total flux cleaned = 0.0020889 Jy ! Component: 3450 - total flux cleaned = 0.00212543 Jy ! Component: 3500 - total flux cleaned = 0.00212546 Jy ! Component: 3550 - total flux cleaned = 0.00214348 Jy ! Component: 3600 - total flux cleaned = 0.00210767 Jy ! Component: 3650 - total flux cleaned = 0.00207217 Jy ! Component: 3700 - total flux cleaned = 0.00205439 Jy ! Component: 3750 - total flux cleaned = 0.00203675 Jy ! Component: 3800 - total flux cleaned = 0.0020541 Jy ! Component: 3850 - total flux cleaned = 0.00193206 Jy ! Component: 3900 - total flux cleaned = 0.00189744 Jy ! Component: 3950 - total flux cleaned = 0.00188016 Jy ! Component: 4000 - total flux cleaned = 0.00181144 Jy ! Component: 4050 - total flux cleaned = 0.00174297 Jy ! Total flux subtracted in 4096 components = 0.00176 Jy ! Clean residual min=-0.000974 max=0.001033 Jy/beam ! Clean residual mean=0.000005 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.549628 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 406 components and 0.549628 Jy ![Exited script file: muppet] wmap "J0747-3310_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.067 at -4.896 degrees (North through East) ! Clean map min=-0.0035958 max=0.30536 Jy/beam ! Writing clean map to FITS file: J0747-3310_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.30536 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000280909 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.275978 0.275978 0.551957 1.10391 2.20783 4.41565 8.83131 17.6626 35.3252 70.6505 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.305 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.067 at -4.896 degrees (North through East) ! Clean map min=-0.0035958 max=0.30536 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0747-3310_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:55 2017