! Started logfile: J0744-0629_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:20:41 2016 obs J0744-0629_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0744-0629_S_2014_08_05_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.763686 visibilities/baseline/integration-bin. ! Found source: J0744-0629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0744-0629_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.326091Jy sigma=0.012336 ! Fit after self-cal, rms=1.218324Jy sigma=0.011268 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=10.38 mas, bpa=20.05 degrees ! Estimated noise=883.131 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.937526 Jy ! Component: 100 - total flux cleaned = 1.40674 Jy ! Total flux subtracted in 100 components = 1.40674 Jy ! Clean residual min=-0.151177 max=0.244202 Jy/beam ! Clean residual mean=0.000011 rms=0.053788 Jy/beam ! Combined flux in latest and established models = 1.40674 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 1.40674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.998172Jy sigma=0.009256 ! Fit after self-cal, rms=0.997574Jy sigma=0.009248 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.136 mas, bmaj=11.25 mas, bpa=19.27 degrees ! Estimated noise=722.964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.44541 Jy ! Component: 100 - total flux cleaned = 0.73972 Jy ! Component: 150 - total flux cleaned = 0.946321 Jy ! Component: 200 - total flux cleaned = 1.09324 Jy ! Total flux subtracted in 200 components = 1.09324 Jy ! Clean residual min=-0.144666 max=0.224475 Jy/beam ! Clean residual mean=0.000278 rms=0.058837 Jy/beam ! Combined flux in latest and established models = 2.49997 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 116 components and 2.49997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.717245Jy sigma=0.006665 ! Fit after self-cal, rms=0.716618Jy sigma=0.006652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.82 HN 1.02 KP 1.07 ! LA 1.08 MK 1.00* NL 1.07 OV 0.97 ! PT 0.83 SC 1.15 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 1.11 KP 1.01 ! LA 1.05 MK 1.00* NL 1.15 OV 1.08 ! PT 0.81 SC 1.24 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.19 HN 1.21 KP 0.80 ! LA 0.88 MK 1.00* NL 1.13 OV 1.10 ! PT 0.76 SC 1.31 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00 HN 1.19 KP 0.79 ! LA 0.82 MK 1.00* NL 1.24 OV 1.22 ! PT 0.81 SC 1.10 ! ! ! Fit before self-cal, rms=0.716618Jy sigma=0.006652 ! Fit after self-cal, rms=0.580108Jy sigma=0.005812 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.368 mas, bmaj=11.66 mas, bpa=18.47 degrees ! Estimated noise=745.749 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473703 Jy ! Component: 100 - total flux cleaned = 0.00470611 Jy ! Component: 150 - total flux cleaned = 0.00566725 Jy ! Component: 200 - total flux cleaned = 0.00732281 Jy ! Total flux subtracted in 200 components = 0.00732281 Jy ! Clean residual min=-0.127089 max=0.191548 Jy/beam ! Clean residual mean=0.000257 rms=0.051317 Jy/beam ! Combined flux in latest and established models = 2.5073 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 129 components and 2.5073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577031Jy sigma=0.005789 ! Fit after self-cal, rms=0.580325Jy sigma=0.005780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.580325Jy sigma=0.005780 ! Fit after self-cal, rms=0.702240Jy sigma=0.004634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.375 mas, bmaj=11.42 mas, bpa=16.72 degrees ! Estimated noise=751.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154398 Jy ! Component: 100 - total flux cleaned = 0.0162949 Jy ! Component: 150 - total flux cleaned = 0.0163043 Jy ! Component: 200 - total flux cleaned = 0.0156502 Jy ! Total flux subtracted in 200 components = 0.0156502 Jy ! Clean residual min=-0.110219 max=0.159103 Jy/beam ! Clean residual mean=0.000046 rms=0.037611 Jy/beam ! Combined flux in latest and established models = 2.52295 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 142 components and 2.52295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.698149Jy sigma=0.004630 ! Fit after self-cal, rms=0.698495Jy sigma=0.004629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261494 Jy ! Component: 100 - total flux cleaned = 0.00193558 Jy ! Component: 150 - total flux cleaned = 0.00132533 Jy ! Component: 200 - total flux cleaned = 0.00189379 Jy ! Total flux subtracted in 200 components = 0.00189379 Jy ! Clean residual min=-0.109198 max=0.157909 Jy/beam ! Clean residual mean=0.000047 rms=0.037517 Jy/beam ! Combined flux in latest and established models = 2.52484 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 144 components and 2.52484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.697087Jy sigma=0.004619 ! Fit after self-cal, rms=0.697296Jy sigma=0.004617 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.697296Jy sigma=0.004617 ! Fit after self-cal, rms=0.709732Jy sigma=0.004614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.41 mas, bmaj=11.45 mas, bpa=16.57 degrees ! Estimated noise=763.666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175643 Jy ! Component: 100 - total flux cleaned = 0.0182455 Jy ! Component: 150 - total flux cleaned = 0.0188385 Jy ! Component: 200 - total flux cleaned = 0.0194007 Jy ! Total flux subtracted in 200 components = 0.0194007 Jy ! Clean residual min=-0.110084 max=0.159121 Jy/beam ! Clean residual mean=0.000049 rms=0.038075 Jy/beam ! Combined flux in latest and established models = 2.54424 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 151 components and 2.54424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.706597Jy sigma=0.004612 ! Fit after self-cal, rms=0.706723Jy sigma=0.004610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152176 Jy ! Component: 100 - total flux cleaned = 0.000379707 Jy ! Component: 150 - total flux cleaned = 0.000396721 Jy ! Component: 200 - total flux cleaned = -0.000104208 Jy ! Total flux subtracted in 200 components = -0.000104208 Jy ! Clean residual min=-0.109500 max=0.157882 Jy/beam ! Clean residual mean=0.000049 rms=0.038014 Jy/beam ! Combined flux in latest and established models = 2.54414 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 154 components and 2.54414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705595Jy sigma=0.004604 ! Fit after self-cal, rms=0.705754Jy sigma=0.004603 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705754Jy sigma=0.004603 ! Fit after self-cal, rms=0.715781Jy sigma=0.004600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.315 mas, bmaj=14.85 mas, bpa=8.669 degrees ! Estimated noise=835.085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306445 Jy ! Component: 100 - total flux cleaned = 0.0336473 Jy ! Component: 150 - total flux cleaned = 0.0328353 Jy ! Component: 200 - total flux cleaned = 0.0336149 Jy ! Total flux subtracted in 200 components = 0.0336149 Jy ! Clean residual min=-0.164440 max=0.215777 Jy/beam ! Clean residual mean=0.000079 rms=0.054934 Jy/beam ! Combined flux in latest and established models = 2.57775 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 160 components and 2.57775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.713771Jy sigma=0.004609 ! Fit after self-cal, rms=0.713351Jy sigma=0.004605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00446078 Jy ! Component: 100 - total flux cleaned = -0.00605974 Jy ! Component: 150 - total flux cleaned = -0.00609569 Jy ! Component: 200 - total flux cleaned = -0.0054686 Jy ! Total flux subtracted in 200 components = -0.0054686 Jy ! Clean residual min=-0.164360 max=0.212786 Jy/beam ! Clean residual mean=0.000084 rms=0.054801 Jy/beam ! Combined flux in latest and established models = 2.57228 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 161 components and 2.57228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.713717Jy sigma=0.004615 ! Fit after self-cal, rms=0.713465Jy sigma=0.004613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.457 mas, bmaj=11.49 mas, bpa=16.31 degrees ! Estimated noise=777.509 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.457 x 11.49 at 16.31 degrees (North through East) ! Clean map min=-0.11026 max=1.162 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.713465Jy sigma=0.004613 ! Fit after self-cal, rms=0.724965Jy sigma=0.004573 ! Inverting map and beam ! Estimated beam: bmin=4.544 mas, bmaj=11.52 mas, bpa=15.54 degrees ! Estimated noise=798.214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156805 Jy ! Component: 100 - total flux cleaned = 0.0185357 Jy ! Component: 150 - total flux cleaned = 0.020598 Jy ! Component: 200 - total flux cleaned = 0.0216516 Jy ! Total flux subtracted in 200 components = 0.0216516 Jy ! Clean residual min=-0.113497 max=0.163461 Jy/beam ! Clean residual mean=0.000048 rms=0.039477 Jy/beam ! Combined flux in latest and established models = 2.59393 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 170 components and 2.59394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.720054Jy sigma=0.004564 ! Fit after self-cal, rms=0.719621Jy sigma=0.004560 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367208 Jy ! Component: 100 - total flux cleaned = -0.000347576 Jy ! Component: 150 - total flux cleaned = 0.000583098 Jy ! Component: 200 - total flux cleaned = 0.000584621 Jy ! Total flux subtracted in 200 components = 0.000584621 Jy ! Clean residual min=-0.112669 max=0.162324 Jy/beam ! Clean residual mean=0.000047 rms=0.039436 Jy/beam ! Combined flux in latest and established models = 2.59452 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 173 components and 2.59452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.718400Jy sigma=0.004554 ! Fit after self-cal, rms=0.718348Jy sigma=0.004551 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.718348Jy sigma=0.004551 ! Fit after self-cal, rms=0.727167Jy sigma=0.004547 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=10.52 mas, bpa=16.26 degrees ! Estimated noise=1033.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0556 Jy ! Component: 100 - total flux cleaned = 1.55742 Jy ! Component: 150 - total flux cleaned = 1.86102 Jy ! Component: 200 - total flux cleaned = 2.06579 Jy ! Total flux subtracted in 200 components = 2.06579 Jy ! Clean residual min=-0.135973 max=0.188698 Jy/beam ! Clean residual mean=0.000056 rms=0.039586 Jy/beam ! Combined flux in latest and established models = 2.06579 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 79 model components to the UV plane model. ! The established model now contains 79 components and 2.06579 Jy ! Inverting map and beam ! Estimated beam: bmin=4.596 mas, bmaj=11.6 mas, bpa=15.36 degrees ! Estimated noise=815.014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.233327 Jy ! Component: 100 - total flux cleaned = 0.380144 Jy ! Component: 150 - total flux cleaned = 0.45267 Jy ! Component: 200 - total flux cleaned = 0.488816 Jy ! Total flux subtracted in 200 components = 0.488816 Jy ! Clean residual min=-0.124225 max=0.157889 Jy/beam ! Clean residual mean=0.000084 rms=0.038679 Jy/beam ! Combined flux in latest and established models = 2.55461 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 147 components and 2.55461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.389 mas, bmaj=15.01 mas, bpa=8.065 degrees ! Estimated noise=858.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131073 Jy ! Component: 100 - total flux cleaned = 0.034399 Jy ! Component: 150 - total flux cleaned = 0.0486678 Jy ! Component: 200 - total flux cleaned = 0.0599309 Jy ! Total flux subtracted in 200 components = 0.0599309 Jy ! Clean residual min=-0.164762 max=0.223243 Jy/beam ! Clean residual mean=0.000183 rms=0.053867 Jy/beam ! Combined flux in latest and established models = 2.61454 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142552 Jy ! Component: 100 - total flux cleaned = 0.00142918 Jy ! Component: 150 - total flux cleaned = 0.00144102 Jy ! Component: 200 - total flux cleaned = 0.00143061 Jy ! Total flux subtracted in 200 components = 0.00143061 Jy ! Clean residual min=-0.162670 max=0.225335 Jy/beam ! Clean residual mean=0.000193 rms=0.053818 Jy/beam ! Combined flux in latest and established models = 2.61597 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 217 components and 2.61597 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.596 mas, bmaj=11.6 mas, bpa=15.36 degrees ! Estimated noise=815.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106952 Jy ! Component: 100 - total flux cleaned = 0.012977 Jy ! Component: 150 - total flux cleaned = 0.0129903 Jy ! Component: 200 - total flux cleaned = 0.0148465 Jy ! Total flux subtracted in 200 components = 0.0148465 Jy ! Clean residual min=-0.114247 max=0.168946 Jy/beam ! Clean residual mean=0.000135 rms=0.037846 Jy/beam ! Combined flux in latest and established models = 2.63081 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 238 components and 2.63081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.686629Jy sigma=0.004228 ! Fit after self-cal, rms=0.681795Jy sigma=0.004192 wmodel J0744-0629_S_2014_08_05_pus_map.mod ! Writing 238 model components to file: J0744-0629_S_2014_08_05_pus_map.mod wobs J0744-0629_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0744-0629_S_2014_08_05_pus_uvs.fits wwins J0744-0629_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J0744-0629_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0711417 Jy ! Component: 100 - total flux cleaned = 0.129893 Jy ! Component: 150 - total flux cleaned = 0.182748 Jy ! Component: 200 - total flux cleaned = 0.227821 Jy ! Component: 250 - total flux cleaned = 0.266502 Jy ! Component: 300 - total flux cleaned = 0.301444 Jy ! Component: 350 - total flux cleaned = 0.323066 Jy ! Component: 400 - total flux cleaned = 0.346907 Jy ! Component: 450 - total flux cleaned = 0.360665 Jy ! Component: 500 - total flux cleaned = 0.373989 Jy ! Component: 550 - total flux cleaned = 0.386909 Jy ! Component: 600 - total flux cleaned = 0.398024 Jy ! Component: 650 - total flux cleaned = 0.412888 Jy ! Component: 700 - total flux cleaned = 0.428653 Jy ! Component: 750 - total flux cleaned = 0.440167 Jy ! Component: 800 - total flux cleaned = 0.446418 Jy ! Component: 850 - total flux cleaned = 0.453771 Jy ! Component: 900 - total flux cleaned = 0.456155 Jy ! Component: 950 - total flux cleaned = 0.462072 Jy ! Component: 1000 - total flux cleaned = 0.467878 Jy ! Component: 1050 - total flux cleaned = 0.474738 Jy ! Component: 1100 - total flux cleaned = 0.481472 Jy ! Component: 1150 - total flux cleaned = 0.489194 Jy ! Component: 1200 - total flux cleaned = 0.496762 Jy ! Component: 1250 - total flux cleaned = 0.504221 Jy ! Component: 1300 - total flux cleaned = 0.509453 Jy ! Component: 1350 - total flux cleaned = 0.513594 Jy ! Component: 1400 - total flux cleaned = 0.519697 Jy ! Component: 1450 - total flux cleaned = 0.523714 Jy ! Component: 1500 - total flux cleaned = 0.530629 Jy ! Component: 1550 - total flux cleaned = 0.535482 Jy ! Component: 1600 - total flux cleaned = 0.538356 Jy ! Component: 1650 - total flux cleaned = 0.537417 Jy ! Component: 1700 - total flux cleaned = 0.541165 Jy ! Component: 1750 - total flux cleaned = 0.543007 Jy ! Component: 1800 - total flux cleaned = 0.544831 Jy ! Component: 1850 - total flux cleaned = 0.54842 Jy ! Component: 1900 - total flux cleaned = 0.550186 Jy ! Component: 1950 - total flux cleaned = 0.553685 Jy ! Component: 2000 - total flux cleaned = 0.554547 Jy ! Component: 2050 - total flux cleaned = 0.557115 Jy ! Component: 2100 - total flux cleaned = 0.55965 Jy ! Component: 2150 - total flux cleaned = 0.56299 Jy ! Component: 2200 - total flux cleaned = 0.567108 Jy ! Component: 2250 - total flux cleaned = 0.568734 Jy ! Component: 2300 - total flux cleaned = 0.572763 Jy ! Component: 2350 - total flux cleaned = 0.575951 Jy ! Component: 2400 - total flux cleaned = 0.579889 Jy ! Component: 2450 - total flux cleaned = 0.583789 Jy ! Component: 2500 - total flux cleaned = 0.586875 Jy ! Component: 2550 - total flux cleaned = 0.591466 Jy ! Component: 2600 - total flux cleaned = 0.596012 Jy ! Component: 2650 - total flux cleaned = 0.59826 Jy ! Component: 2700 - total flux cleaned = 0.603466 Jy ! Component: 2750 - total flux cleaned = 0.606419 Jy ! Component: 2800 - total flux cleaned = 0.611519 Jy ! Component: 2850 - total flux cleaned = 0.615118 Jy ! Component: 2900 - total flux cleaned = 0.616545 Jy ! Component: 2950 - total flux cleaned = 0.62009 Jy ! Component: 3000 - total flux cleaned = 0.6236 Jy ! Component: 3050 - total flux cleaned = 0.624986 Jy ! Component: 3100 - total flux cleaned = 0.627744 Jy ! Component: 3150 - total flux cleaned = 0.630482 Jy ! Component: 3200 - total flux cleaned = 0.629798 Jy ! Component: 3250 - total flux cleaned = 0.630477 Jy ! Component: 3300 - total flux cleaned = 0.633816 Jy ! Component: 3350 - total flux cleaned = 0.635797 Jy ! Component: 3400 - total flux cleaned = 0.639725 Jy ! Component: 3450 - total flux cleaned = 0.640377 Jy ! Component: 3500 - total flux cleaned = 0.642964 Jy ! Component: 3550 - total flux cleaned = 0.64552 Jy ! Component: 3600 - total flux cleaned = 0.648057 Jy ! Component: 3650 - total flux cleaned = 0.64932 Jy ! Component: 3700 - total flux cleaned = 0.651199 Jy ! Component: 3750 - total flux cleaned = 0.655549 Jy ! Component: 3800 - total flux cleaned = 0.658016 Jy ! Component: 3850 - total flux cleaned = 0.660455 Jy ! Component: 3900 - total flux cleaned = 0.661664 Jy ! Component: 3950 - total flux cleaned = 0.662863 Jy ! Component: 4000 - total flux cleaned = 0.665255 Jy ! Component: 4050 - total flux cleaned = 0.665255 Jy ! Total flux subtracted in 4096 components = 0.668201 Jy ! Clean residual min=-0.030924 max=0.031577 Jy/beam ! Clean residual mean=0.000055 rms=0.013864 Jy/beam ! Combined flux in latest and established models = 3.29901 Jy keep ! Adding 515 model components to the UV plane model. ! The established model now contains 753 components and 3.29901 Jy ![Exited script file: muppet] wmap "J0744-0629_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.596 x 11.6 at 15.36 degrees (North through East) ! Clean map min=-0.10074 max=1.3061 Jy/beam ! Writing clean map to FITS file: J0744-0629_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.30612 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0133768 device "J0744-0629_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0744-0629_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.07249 3.07249 6.14497 12.2899 24.5799 49.1598 98.3196 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0401 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.306 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.596 x 11.6 at 15.36 degrees (North through East) ! Clean map min=-0.10074 max=1.3061 Jy/beam quit ! Quitting program ! Log file J0744-0629_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:20:46 2016