! Started logfile: J0742+5444_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:20:46 2017 obs J0742+5444_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0742+5444_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J0742+5444 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0742+5444_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.872906Jy sigma=0.011974 ! Fit after self-cal, rms=0.864355Jy sigma=0.011866 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=4.561 mas, bpa=-84.51 degrees ! Estimated noise=1214.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105516 Jy ! Component: 100 - total flux cleaned = 0.129955 Jy ! Total flux subtracted in 100 components = 0.129955 Jy ! Clean residual min=-0.005817 max=0.008644 Jy/beam ! Clean residual mean=-0.000053 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 0.129955 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.129955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079908Jy sigma=0.000899 ! Fit after self-cal, rms=0.079914Jy sigma=0.000899 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=5.511 mas, bpa=-85.37 degrees ! Estimated noise=726.148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00960309 Jy ! Component: 100 - total flux cleaned = 0.0138655 Jy ! Component: 150 - total flux cleaned = 0.0161875 Jy ! Component: 200 - total flux cleaned = 0.0170941 Jy ! Total flux subtracted in 200 components = 0.0170941 Jy ! Clean residual min=-0.004586 max=0.004984 Jy/beam ! Clean residual mean=-0.000050 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.147049 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.147049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078520Jy sigma=0.000890 ! Fit after self-cal, rms=0.078443Jy sigma=0.000890 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.86 KP 1.00* LA 1.00 ! MK 0.98 NL 0.98 OV 0.95 PT 0.98 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 KP 1.00* LA 0.97 ! MK 0.98 NL 1.04 OV 0.98 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.17 KP 1.00* LA 0.80 ! MK 1.04 NL 1.00 OV 0.96 PT 0.95 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00 KP 1.00* LA 0.86 ! MK 0.97 NL 1.08 OV 1.00 PT 1.04 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.078443Jy sigma=0.000890 ! Fit after self-cal, rms=0.073239Jy sigma=0.000865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=5.461 mas, bpa=-86.06 degrees ! Estimated noise=721.443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000678927 Jy ! Component: 100 - total flux cleaned = -0.000898475 Jy ! Component: 150 - total flux cleaned = -0.00102234 Jy ! Component: 200 - total flux cleaned = -0.00116292 Jy ! Total flux subtracted in 200 components = -0.00116292 Jy ! Clean residual min=-0.003058 max=0.002653 Jy/beam ! Clean residual mean=-0.000024 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.145886 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.145886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073186Jy sigma=0.000864 ! Fit after self-cal, rms=0.072874Jy sigma=0.000864 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072874Jy sigma=0.000864 ! Fit after self-cal, rms=0.072950Jy sigma=0.000861 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=5.445 mas, bpa=-85.88 degrees ! Estimated noise=720.113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117523 Jy ! Component: 100 - total flux cleaned = -0.000179485 Jy ! Component: 150 - total flux cleaned = -0.000234513 Jy ! Component: 200 - total flux cleaned = -0.000308186 Jy ! Total flux subtracted in 200 components = -0.000308186 Jy ! Clean residual min=-0.002509 max=0.002625 Jy/beam ! Clean residual mean=-0.000019 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.145578 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.145578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072921Jy sigma=0.000860 ! Fit after self-cal, rms=0.072945Jy sigma=0.000860 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142007 Jy ! Component: 100 - total flux cleaned = 0.00174574 Jy ! Component: 150 - total flux cleaned = 0.00194034 Jy ! Component: 200 - total flux cleaned = 0.00221624 Jy ! Total flux subtracted in 200 components = 0.00221624 Jy ! Clean residual min=-0.002081 max=0.002098 Jy/beam ! Clean residual mean=-0.000003 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.147794 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.147794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072815Jy sigma=0.000859 ! Fit after self-cal, rms=0.072840Jy sigma=0.000859 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072840Jy sigma=0.000859 ! Fit after self-cal, rms=0.072857Jy sigma=0.000859 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=5.437 mas, bpa=-86.07 degrees ! Estimated noise=718.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.82481e-05 Jy ! Component: 100 - total flux cleaned = 0.000125182 Jy ! Component: 150 - total flux cleaned = 0.000215378 Jy ! Component: 200 - total flux cleaned = 0.000241698 Jy ! Total flux subtracted in 200 components = 0.000241698 Jy ! Clean residual min=-0.002006 max=0.001904 Jy/beam ! Clean residual mean=0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.148036 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.148036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072822Jy sigma=0.000858 ! Fit after self-cal, rms=0.072826Jy sigma=0.000858 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.96224e-05 Jy ! Component: 100 - total flux cleaned = -2.9333e-05 Jy ! Component: 150 - total flux cleaned = -5.64439e-06 Jy ! Component: 200 - total flux cleaned = -5.32586e-06 Jy ! Total flux subtracted in 200 components = -5.32586e-06 Jy ! Clean residual min=-0.001985 max=0.001880 Jy/beam ! Clean residual mean=0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.148031 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 59 components and 0.148031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072808Jy sigma=0.000858 ! Fit after self-cal, rms=0.072816Jy sigma=0.000858 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072816Jy sigma=0.000858 ! Fit after self-cal, rms=0.072858Jy sigma=0.000858 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.14 mas, bmaj=9.679 mas, bpa=79.98 degrees ! Estimated noise=839.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279879 Jy ! Component: 100 - total flux cleaned = 0.000257851 Jy ! Component: 150 - total flux cleaned = 0.000276474 Jy ! Component: 200 - total flux cleaned = 0.000311064 Jy ! Total flux subtracted in 200 components = 0.000311064 Jy ! Clean residual min=-0.002472 max=0.001925 Jy/beam ! Clean residual mean=0.000008 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.148342 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.148342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072853Jy sigma=0.000858 ! Fit after self-cal, rms=0.072846Jy sigma=0.000858 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.51063e-05 Jy ! Component: 100 - total flux cleaned = 7.03897e-05 Jy ! Component: 150 - total flux cleaned = 8.60651e-05 Jy ! Component: 200 - total flux cleaned = 8.56685e-05 Jy ! Total flux subtracted in 200 components = 8.56685e-05 Jy ! Clean residual min=-0.002427 max=0.001868 Jy/beam ! Clean residual mean=0.000009 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.148427 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.148427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072842Jy sigma=0.000858 ! Fit after self-cal, rms=0.072842Jy sigma=0.000858 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=5.432 mas, bpa=-86.17 degrees ! Estimated noise=718.672 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.861 x 5.432 at -86.17 degrees (North through East) ! Clean map min=-0.0029462 max=0.13252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=4.475 mas, bpa=-84.68 degrees ! Estimated noise=1197.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104079 Jy ! Component: 100 - total flux cleaned = 0.12893 Jy ! Component: 150 - total flux cleaned = 0.137618 Jy ! Component: 200 - total flux cleaned = 0.14035 Jy ! Total flux subtracted in 200 components = 0.14035 Jy ! Clean residual min=-0.003797 max=0.003744 Jy/beam ! Clean residual mean=-0.000016 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.14035 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.14035 Jy ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=5.432 mas, bpa=-86.17 degrees ! Estimated noise=718.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312983 Jy ! Component: 100 - total flux cleaned = 0.0046776 Jy ! Component: 150 - total flux cleaned = 0.00516432 Jy ! Component: 200 - total flux cleaned = 0.00562882 Jy ! Total flux subtracted in 200 components = 0.00562882 Jy ! Clean residual min=-0.002145 max=0.001995 Jy/beam ! Clean residual mean=-0.000004 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.145979 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.145979 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.14 mas, bmaj=9.679 mas, bpa=79.98 degrees ! Estimated noise=839.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154023 Jy ! Component: 100 - total flux cleaned = 0.00181477 Jy ! Component: 150 - total flux cleaned = 0.00178557 Jy ! Component: 200 - total flux cleaned = 0.00175973 Jy ! Total flux subtracted in 200 components = 0.00175973 Jy ! Clean residual min=-0.002420 max=0.002013 Jy/beam ! Clean residual mean=0.000005 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.147739 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.47008e-05 Jy ! Component: 100 - total flux cleaned = 6.86727e-05 Jy ! Component: 150 - total flux cleaned = 8.90842e-05 Jy ! Component: 200 - total flux cleaned = 0.000107705 Jy ! Total flux subtracted in 200 components = 0.000107705 Jy ! Clean residual min=-0.002386 max=0.001930 Jy/beam ! Clean residual mean=0.000005 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.147846 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 58 components and 0.147846 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=5.432 mas, bpa=-86.17 degrees ! Estimated noise=718.672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.95383e-05 Jy ! Component: 100 - total flux cleaned = -0.00013082 Jy ! Component: 150 - total flux cleaned = -0.0001951 Jy ! Component: 200 - total flux cleaned = -0.00022444 Jy ! Total flux subtracted in 200 components = -0.00022444 Jy ! Clean residual min=-0.001971 max=0.001831 Jy/beam ! Clean residual mean=0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.147622 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.147622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072866Jy sigma=0.000858 ! Fit after self-cal, rms=0.072870Jy sigma=0.000858 wmodel J0742+5444_S_2014_01_04_pus_map.mod ! Writing 68 model components to file: J0742+5444_S_2014_01_04_pus_map.mod wobs J0742+5444_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0742+5444_S_2014_01_04_pus_uvs.fits wwins J0742+5444_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0742+5444_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000371062 Jy ! Component: 100 - total flux cleaned = -0.000601829 Jy ! Component: 150 - total flux cleaned = -0.000877278 Jy ! Component: 200 - total flux cleaned = -0.000907774 Jy ! Component: 250 - total flux cleaned = -0.000797896 Jy ! Component: 300 - total flux cleaned = -0.00066438 Jy ! Component: 350 - total flux cleaned = -0.000482301 Jy ! Component: 400 - total flux cleaned = -0.000306036 Jy ! Component: 450 - total flux cleaned = -0.000135083 Jy ! Component: 500 - total flux cleaned = -0.000111747 Jy ! Component: 550 - total flux cleaned = -8.84546e-05 Jy ! Component: 600 - total flux cleaned = 2.86692e-06 Jy ! Component: 650 - total flux cleaned = 4.73513e-05 Jy ! Component: 700 - total flux cleaned = 9.09883e-05 Jy ! Component: 750 - total flux cleaned = 0.000112202 Jy ! Component: 800 - total flux cleaned = 0.000174291 Jy ! Component: 850 - total flux cleaned = 0.000235463 Jy ! Component: 900 - total flux cleaned = 0.000255616 Jy ! Component: 950 - total flux cleaned = 0.000353338 Jy ! Component: 1000 - total flux cleaned = 0.000314364 Jy ! Component: 1050 - total flux cleaned = 0.000333238 Jy ! Component: 1100 - total flux cleaned = 0.000258758 Jy ! Component: 1150 - total flux cleaned = 0.00024055 Jy ! Component: 1200 - total flux cleaned = 0.000204047 Jy ! Component: 1250 - total flux cleaned = 8.02884e-05 Jy ! Component: 1300 - total flux cleaned = -2.41182e-05 Jy ! Component: 1350 - total flux cleaned = -9.21588e-05 Jy ! Component: 1400 - total flux cleaned = -0.000159767 Jy ! Component: 1450 - total flux cleaned = -0.000226327 Jy ! Component: 1500 - total flux cleaned = -0.000325093 Jy ! Component: 1550 - total flux cleaned = -0.000390039 Jy ! Component: 1600 - total flux cleaned = -0.000454215 Jy ! Component: 1650 - total flux cleaned = -0.000533684 Jy ! Component: 1700 - total flux cleaned = -0.000643082 Jy ! Component: 1750 - total flux cleaned = -0.000735429 Jy ! Component: 1800 - total flux cleaned = -0.000766025 Jy ! Component: 1850 - total flux cleaned = -0.000826398 Jy ! Component: 1900 - total flux cleaned = -0.000886207 Jy ! Component: 1950 - total flux cleaned = -0.000930564 Jy ! Component: 2000 - total flux cleaned = -0.000974374 Jy ! Component: 2050 - total flux cleaned = -0.0010756 Jy ! Component: 2100 - total flux cleaned = -0.00108996 Jy ! Component: 2150 - total flux cleaned = -0.00117521 Jy ! Component: 2200 - total flux cleaned = -0.0012316 Jy ! Component: 2250 - total flux cleaned = -0.00131498 Jy ! Component: 2300 - total flux cleaned = -0.00142487 Jy ! Component: 2350 - total flux cleaned = -0.00150669 Jy ! Component: 2400 - total flux cleaned = -0.00157436 Jy ! Component: 2450 - total flux cleaned = -0.00168134 Jy ! Component: 2500 - total flux cleaned = -0.00173446 Jy ! Component: 2550 - total flux cleaned = -0.0018265 Jy ! Component: 2600 - total flux cleaned = -0.00190471 Jy ! Component: 2650 - total flux cleaned = -0.00200796 Jy ! Component: 2700 - total flux cleaned = -0.00207172 Jy ! Component: 2750 - total flux cleaned = -0.00214781 Jy ! Component: 2800 - total flux cleaned = -0.00224807 Jy ! Component: 2850 - total flux cleaned = -0.00226036 Jy ! Component: 2900 - total flux cleaned = -0.0023222 Jy ! Component: 2950 - total flux cleaned = -0.00238339 Jy ! Component: 3000 - total flux cleaned = -0.00245608 Jy ! Component: 3050 - total flux cleaned = -0.0024802 Jy ! Component: 3100 - total flux cleaned = -0.00250413 Jy ! Component: 3150 - total flux cleaned = -0.00253974 Jy ! Component: 3200 - total flux cleaned = -0.00252803 Jy ! Component: 3250 - total flux cleaned = -0.00258631 Jy ! Component: 3300 - total flux cleaned = -0.00260941 Jy ! Component: 3350 - total flux cleaned = -0.00260927 Jy ! Component: 3400 - total flux cleaned = -0.00260929 Jy ! Component: 3450 - total flux cleaned = -0.00259807 Jy ! Component: 3500 - total flux cleaned = -0.00259804 Jy ! Component: 3550 - total flux cleaned = -0.00265391 Jy ! Component: 3600 - total flux cleaned = -0.00265397 Jy ! Component: 3650 - total flux cleaned = -0.0026871 Jy ! Component: 3700 - total flux cleaned = -0.00266526 Jy ! Component: 3750 - total flux cleaned = -0.00267634 Jy ! Component: 3800 - total flux cleaned = -0.00276292 Jy ! Component: 3850 - total flux cleaned = -0.00276287 Jy ! Component: 3900 - total flux cleaned = -0.00278435 Jy ! Component: 3950 - total flux cleaned = -0.00279505 Jy ! Component: 4000 - total flux cleaned = -0.00282673 Jy ! Component: 4050 - total flux cleaned = -0.00283716 Jy ! Total flux subtracted in 4096 components = -0.00284753 Jy ! Clean residual min=-0.000583 max=0.000563 Jy/beam ! Clean residual mean=0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.144774 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 320 components and 0.144774 Jy ![Exited script file: muppet] wmap "J0742+5444_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.861 x 5.432 at -86.17 degrees (North through East) ! Clean map min=-0.0025972 max=0.13292 Jy/beam ! Writing clean map to FITS file: J0742+5444_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132923 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175454 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.39599 0.39599 0.791981 1.58396 3.16792 6.33585 12.6717 25.3434 50.6868 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.861 x 5.432 at -86.17 degrees (North through East) ! Clean map min=-0.0025972 max=0.13292 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0742+5444_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:51 2017