! Started logfile: J0741-2647_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:20:41 2017 obs J0741-2647_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0741-2647_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0741-2647 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0741-2647_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.782311Jy sigma=0.008626 ! Fit after self-cal, rms=0.730781Jy sigma=0.008119 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.417 mas, bmaj=5.647 mas, bpa=-3.302 degrees ! Estimated noise=1316.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199189 Jy ! Component: 100 - total flux cleaned = 0.257435 Jy ! Total flux subtracted in 100 components = 0.257435 Jy ! Clean residual min=-0.020887 max=0.027131 Jy/beam ! Clean residual mean=-0.000105 rms=0.005155 Jy/beam ! Combined flux in latest and established models = 0.257435 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.257435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121289Jy sigma=0.001229 ! Fit after self-cal, rms=0.121327Jy sigma=0.001228 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=6.647 mas, bpa=-3.376 degrees ! Estimated noise=674.947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428917 Jy ! Component: 100 - total flux cleaned = 0.0629829 Jy ! Component: 150 - total flux cleaned = 0.0725791 Jy ! Component: 200 - total flux cleaned = 0.0771613 Jy ! Total flux subtracted in 200 components = 0.0771613 Jy ! Clean residual min=-0.013924 max=0.021809 Jy/beam ! Clean residual mean=-0.000171 rms=0.004818 Jy/beam ! Combined flux in latest and established models = 0.334597 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.334597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103914Jy sigma=0.001118 ! Fit after self-cal, rms=0.103940Jy sigma=0.001118 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.99 ! MK 0.99 NL 0.98 OV 0.92 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.00* KP 1.00* LA 0.96 ! MK 0.98 NL 1.06 OV 0.96 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.80 ! MK 1.01 NL 1.02 OV 0.88 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.00* KP 1.00* LA 0.85 ! MK 1.01 NL 1.12 OV 0.98 PT 0.99 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.103940Jy sigma=0.001118 ! Fit after self-cal, rms=0.099720Jy sigma=0.001004 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=6.692 mas, bpa=-3.3 degrees ! Estimated noise=681.063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418355 Jy ! Component: 100 - total flux cleaned = 0.00441277 Jy ! Component: 150 - total flux cleaned = 0.00441903 Jy ! Component: 200 - total flux cleaned = 0.00450821 Jy ! Total flux subtracted in 200 components = 0.00450821 Jy ! Clean residual min=-0.011304 max=0.010195 Jy/beam ! Clean residual mean=-0.000029 rms=0.003253 Jy/beam ! Combined flux in latest and established models = 0.339105 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.339105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099307Jy sigma=0.001004 ! Fit after self-cal, rms=0.099010Jy sigma=0.001003 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099010Jy sigma=0.001003 ! Fit after self-cal, rms=0.091336Jy sigma=0.000928 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=6.713 mas, bpa=-3.425 degrees ! Estimated noise=681.829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177494 Jy ! Component: 100 - total flux cleaned = 0.00192006 Jy ! Component: 150 - total flux cleaned = 0.00196204 Jy ! Component: 200 - total flux cleaned = 0.00196144 Jy ! Total flux subtracted in 200 components = 0.00196144 Jy ! Clean residual min=-0.004805 max=0.009530 Jy/beam ! Clean residual mean=-0.000074 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.341066 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.341066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091264Jy sigma=0.000928 ! Fit after self-cal, rms=0.091260Jy sigma=0.000927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00867154 Jy ! Component: 100 - total flux cleaned = 0.0113831 Jy ! Component: 150 - total flux cleaned = 0.0121148 Jy ! Component: 200 - total flux cleaned = 0.0122664 Jy ! Total flux subtracted in 200 components = 0.0122664 Jy ! Clean residual min=-0.004584 max=0.004568 Jy/beam ! Clean residual mean=-0.000040 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.353333 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.353333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090513Jy sigma=0.000919 ! Fit after self-cal, rms=0.090431Jy sigma=0.000918 ! Inverting map ! Added new window around map position (56, -40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426572 Jy ! Component: 100 - total flux cleaned = 0.00625667 Jy ! Component: 150 - total flux cleaned = 0.00689923 Jy ! Component: 200 - total flux cleaned = 0.0073392 Jy ! Total flux subtracted in 200 components = 0.0073392 Jy ! Clean residual min=-0.003497 max=0.002653 Jy/beam ! Clean residual mean=-0.000029 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.360672 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 85 components and 0.360672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090229Jy sigma=0.000916 ! Fit after self-cal, rms=0.090218Jy sigma=0.000915 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090218Jy sigma=0.000915 ! Fit after self-cal, rms=0.090315Jy sigma=0.000914 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=6.718 mas, bpa=-3.425 degrees ! Estimated noise=682.441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199958 Jy ! Component: 100 - total flux cleaned = 0.00252969 Jy ! Component: 150 - total flux cleaned = 0.0027247 Jy ! Component: 200 - total flux cleaned = 0.00289414 Jy ! Total flux subtracted in 200 components = 0.00289414 Jy ! Clean residual min=-0.002431 max=0.002397 Jy/beam ! Clean residual mean=-0.000012 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.363566 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.363566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090229Jy sigma=0.000913 ! Fit after self-cal, rms=0.090229Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421042 Jy ! Component: 100 - total flux cleaned = 0.00049576 Jy ! Component: 150 - total flux cleaned = 0.000562252 Jy ! Component: 200 - total flux cleaned = 0.000594073 Jy ! Total flux subtracted in 200 components = 0.000594073 Jy ! Clean residual min=-0.002315 max=0.002132 Jy/beam ! Clean residual mean=-0.000010 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.36416 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.36416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090199Jy sigma=0.000913 ! Fit after self-cal, rms=0.090197Jy sigma=0.000913 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090197Jy sigma=0.000913 ! Fit after self-cal, rms=0.090419Jy sigma=0.000913 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.718 mas, bmaj=17.85 mas, bpa=0.7228 degrees ! Estimated noise=849.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731076 Jy ! Component: 100 - total flux cleaned = 0.00119241 Jy ! Component: 150 - total flux cleaned = 0.00133953 Jy ! Component: 200 - total flux cleaned = 0.00148235 Jy ! Total flux subtracted in 200 components = 0.00148235 Jy ! Clean residual min=-0.002372 max=0.002299 Jy/beam ! Clean residual mean=-0.000015 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.365643 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 130 components and 0.365643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090402Jy sigma=0.000913 ! Fit after self-cal, rms=0.090399Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.71885e-05 Jy ! Component: 100 - total flux cleaned = 0.000124923 Jy ! Component: 150 - total flux cleaned = 0.000158464 Jy ! Component: 200 - total flux cleaned = 0.000188755 Jy ! Total flux subtracted in 200 components = 0.000188755 Jy ! Clean residual min=-0.002312 max=0.002181 Jy/beam ! Clean residual mean=-0.000014 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.365831 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.365831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090397Jy sigma=0.000913 ! Fit after self-cal, rms=0.090394Jy sigma=0.000913 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=6.72 mas, bpa=-3.425 degrees ! Estimated noise=684.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 6.72 at -3.425 degrees (North through East) ! Clean map min=-0.002049 max=0.27893 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=5.689 mas, bpa=-3.11 degrees ! Estimated noise=1329.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201145 Jy ! Component: 100 - total flux cleaned = 0.261702 Jy ! Component: 150 - total flux cleaned = 0.293894 Jy ! Component: 200 - total flux cleaned = 0.313978 Jy ! Total flux subtracted in 200 components = 0.313978 Jy ! Clean residual min=-0.008299 max=0.011277 Jy/beam ! Clean residual mean=-0.000045 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 0.313978 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.313978 Jy ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=6.72 mas, bpa=-3.425 degrees ! Estimated noise=684.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182424 Jy ! Component: 100 - total flux cleaned = 0.028358 Jy ! Component: 150 - total flux cleaned = 0.0348607 Jy ! Component: 200 - total flux cleaned = 0.0395021 Jy ! Total flux subtracted in 200 components = 0.0395021 Jy ! Clean residual min=-0.003253 max=0.003564 Jy/beam ! Clean residual mean=-0.000036 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.35348 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.35348 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.718 mas, bmaj=17.85 mas, bpa=0.7228 degrees ! Estimated noise=849.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500549 Jy ! Component: 100 - total flux cleaned = 0.0080316 Jy ! Component: 150 - total flux cleaned = 0.0100066 Jy ! Component: 200 - total flux cleaned = 0.0113435 Jy ! Total flux subtracted in 200 components = 0.0113435 Jy ! Clean residual min=-0.002563 max=0.002314 Jy/beam ! Clean residual mean=-0.000022 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.364823 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796629 Jy ! Component: 100 - total flux cleaned = 0.0011445 Jy ! Component: 150 - total flux cleaned = 0.00138364 Jy ! Component: 200 - total flux cleaned = 0.00144526 Jy ! Total flux subtracted in 200 components = 0.00144526 Jy ! Clean residual min=-0.002362 max=0.002129 Jy/beam ! Clean residual mean=-0.000014 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.366269 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 118 components and 0.366269 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=6.72 mas, bpa=-3.425 degrees ! Estimated noise=684.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000316349 Jy ! Component: 100 - total flux cleaned = -0.000197357 Jy ! Component: 150 - total flux cleaned = -0.000141774 Jy ! Component: 200 - total flux cleaned = -9.58488e-05 Jy ! Total flux subtracted in 200 components = -9.58488e-05 Jy ! Clean residual min=-0.002199 max=0.002172 Jy/beam ! Clean residual mean=-0.000006 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.366173 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 136 components and 0.366173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090432Jy sigma=0.000913 ! Fit after self-cal, rms=0.090427Jy sigma=0.000913 wmodel J0741-2647_S_2014_01_04_pus_map.mod ! Writing 136 model components to file: J0741-2647_S_2014_01_04_pus_map.mod wobs J0741-2647_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0741-2647_S_2014_01_04_pus_uvs.fits wwins J0741-2647_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0741-2647_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000520212 Jy ! Component: 100 - total flux cleaned = -0.00107338 Jy ! Component: 150 - total flux cleaned = -0.00159902 Jy ! Component: 200 - total flux cleaned = -0.00216627 Jy ! Component: 250 - total flux cleaned = -0.00264666 Jy ! Component: 300 - total flux cleaned = -0.00320004 Jy ! Component: 350 - total flux cleaned = -0.0036147 Jy ! Component: 400 - total flux cleaned = -0.00401553 Jy ! Component: 450 - total flux cleaned = -0.00443167 Jy ! Component: 500 - total flux cleaned = -0.00472861 Jy ! Component: 550 - total flux cleaned = -0.00496528 Jy ! Component: 600 - total flux cleaned = -0.00522223 Jy ! Component: 650 - total flux cleaned = -0.00547318 Jy ! Component: 700 - total flux cleaned = -0.00567018 Jy ! Component: 750 - total flux cleaned = -0.00591165 Jy ! Component: 800 - total flux cleaned = -0.00617236 Jy ! Component: 850 - total flux cleaned = -0.00640467 Jy ! Component: 900 - total flux cleaned = -0.00663301 Jy ! Component: 950 - total flux cleaned = -0.0068793 Jy ! Component: 1000 - total flux cleaned = -0.00703352 Jy ! Component: 1050 - total flux cleaned = -0.00720595 Jy ! Component: 1100 - total flux cleaned = -0.00741756 Jy ! Component: 1150 - total flux cleaned = -0.0075633 Jy ! Component: 1200 - total flux cleaned = -0.00770726 Jy ! Component: 1250 - total flux cleaned = -0.00786859 Jy ! Component: 1300 - total flux cleaned = -0.00800745 Jy ! Component: 1350 - total flux cleaned = -0.00818319 Jy ! Component: 1400 - total flux cleaned = -0.0083558 Jy ! Component: 1450 - total flux cleaned = -0.0084312 Jy ! Component: 1500 - total flux cleaned = -0.00841249 Jy ! Component: 1550 - total flux cleaned = -0.00846752 Jy ! Component: 1600 - total flux cleaned = -0.00850361 Jy ! Component: 1650 - total flux cleaned = -0.00846782 Jy ! Component: 1700 - total flux cleaned = -0.00853882 Jy ! Component: 1750 - total flux cleaned = -0.00855634 Jy ! Component: 1800 - total flux cleaned = -0.00855641 Jy ! Component: 1850 - total flux cleaned = -0.00859068 Jy ! Component: 1900 - total flux cleaned = -0.00855721 Jy ! Component: 1950 - total flux cleaned = -0.00859061 Jy ! Component: 2000 - total flux cleaned = -0.00852452 Jy ! Component: 2050 - total flux cleaned = -0.008541 Jy ! Component: 2100 - total flux cleaned = -0.00850856 Jy ! Component: 2150 - total flux cleaned = -0.00844454 Jy ! Component: 2200 - total flux cleaned = -0.00839717 Jy ! Component: 2250 - total flux cleaned = -0.0084132 Jy ! Component: 2300 - total flux cleaned = -0.0084134 Jy ! Component: 2350 - total flux cleaned = -0.00842883 Jy ! Component: 2400 - total flux cleaned = -0.00845928 Jy ! Component: 2450 - total flux cleaned = -0.00844423 Jy ! Component: 2500 - total flux cleaned = -0.00848937 Jy ! Component: 2550 - total flux cleaned = -0.008534 Jy ! Component: 2600 - total flux cleaned = -0.00857821 Jy ! Component: 2650 - total flux cleaned = -0.00857815 Jy ! Component: 2700 - total flux cleaned = -0.00860734 Jy ! Component: 2750 - total flux cleaned = -0.00866516 Jy ! Component: 2800 - total flux cleaned = -0.00876556 Jy ! Component: 2850 - total flux cleaned = -0.00879411 Jy ! Component: 2900 - total flux cleaned = -0.00886514 Jy ! Component: 2950 - total flux cleaned = -0.00889344 Jy ! Component: 3000 - total flux cleaned = -0.00890738 Jy ! Component: 3050 - total flux cleaned = -0.00897732 Jy ! Component: 3100 - total flux cleaned = -0.00901904 Jy ! Component: 3150 - total flux cleaned = -0.00901914 Jy ! Component: 3200 - total flux cleaned = -0.00907428 Jy ! Component: 3250 - total flux cleaned = -0.00912916 Jy ! Component: 3300 - total flux cleaned = -0.00914285 Jy ! Component: 3350 - total flux cleaned = -0.00915647 Jy ! Component: 3400 - total flux cleaned = -0.00917007 Jy ! Component: 3450 - total flux cleaned = -0.00923752 Jy ! Component: 3500 - total flux cleaned = -0.00923757 Jy ! Component: 3550 - total flux cleaned = -0.00925094 Jy ! Component: 3600 - total flux cleaned = -0.00926421 Jy ! Component: 3650 - total flux cleaned = -0.00927746 Jy ! Component: 3700 - total flux cleaned = -0.00930393 Jy ! Component: 3750 - total flux cleaned = -0.00931708 Jy ! Component: 3800 - total flux cleaned = -0.00933024 Jy ! Component: 3850 - total flux cleaned = -0.00933027 Jy ! Component: 3900 - total flux cleaned = -0.00936958 Jy ! Component: 3950 - total flux cleaned = -0.00940878 Jy ! Component: 4000 - total flux cleaned = -0.00944786 Jy ! Component: 4050 - total flux cleaned = -0.00944787 Jy ! Total flux subtracted in 4096 components = -0.00951282 Jy ! Clean residual min=-0.000780 max=0.000730 Jy/beam ! Clean residual mean=-0.000010 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.35666 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 395 components and 0.35666 Jy ![Exited script file: muppet] wmap "J0741-2647_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 6.72 at -3.425 degrees (North through East) ! Clean map min=-0.0014489 max=0.27767 Jy/beam ! Writing clean map to FITS file: J0741-2647_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.277666 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207664 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.224367 0.224367 0.448735 0.897469 1.79494 3.58988 7.17975 14.3595 28.719 57.438 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.277 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 6.72 at -3.425 degrees (North through East) ! Clean map min=-0.0014489 max=0.27767 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0741-2647_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:46 2017