! Started logfile: J0739-2420_X_2014_08_05_pus_uvs.log on Sat Nov 12 21:08:35 2016
obs J0739-2420_X_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0739-2420_X_2014_08_05_pus_uva.fits
! AN table 1: 123 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.776513 visibilities/baseline/integration-bin.
! Found source: J0739-2420
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 414 lines of history.
! 
! Reading 51576 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0739-2420_X_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 143 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001819Jy  sigma=0.010289
! Fit after  self-cal, rms=0.958777Jy  sigma=0.009858
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8156 mas, bmaj=3.604 mas, bpa=18.04 degrees
! Estimated noise=600.225 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342773 Jy
! Component: 100  -  total flux cleaned = 0.0418601 Jy
! Total flux subtracted in 100 components = 0.0418601 Jy
! Clean residual min=-0.002027 max=0.002470 Jy/beam
! Clean residual mean=0.000002 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.0418601 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0418601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082146Jy  sigma=0.000774
! Fit after  self-cal, rms=0.080543Jy  sigma=0.000756
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403553 Jy
! Component: 100  -  total flux cleaned = 0.00517109 Jy
! Total flux subtracted in 100 components = 0.00517109 Jy
! Clean residual min=-0.002045 max=0.002261 Jy/beam
! Clean residual mean=0.000004 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0470312 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.0470312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080306Jy  sigma=0.000754
! Fit after  self-cal, rms=0.080296Jy  sigma=0.000754
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=3.898 mas, bpa=15.86 degrees
! Estimated noise=308.704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156751 Jy
! Component: 100  -  total flux cleaned = 0.00230393 Jy
! Component: 150  -  total flux cleaned = 0.00232798 Jy
! Component: 200  -  total flux cleaned = 0.00236477 Jy
! Total flux subtracted in 200 components = 0.00236477 Jy
! Clean residual min=-0.001692 max=0.001355 Jy/beam
! Clean residual mean=0.000013 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0493959 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 0.0493959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080258Jy  sigma=0.000754
! Fit after  self-cal, rms=0.080263Jy  sigma=0.000754
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     HN        0.96     KP        0.93     
!   LA        1.06     MK        1.00*    NL        1.04     OV        1.06     
!   PT        1.08     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.01     KP        0.85     
!   LA        1.01     MK        1.00*    NL        1.05     OV        1.06     
!   PT        1.01     SC        1.11     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.06     HN        1.05     KP        0.90     
!   LA        1.04     MK        1.00*    NL        1.01     OV        1.07     
!   PT        0.94     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.05     HN        1.00     KP        0.82     
!   LA        1.06     MK        1.00*    NL        1.01     OV        1.08     
!   PT        0.99     SC        1.11     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        0.97     KP        0.81     
!   LA        1.07     MK        1.00*    NL        0.99     OV        1.05     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     HN        0.96     KP        0.83     
!   LA        1.10     MK        1.00*    NL        1.02     OV        1.02     
!   PT        0.95     SC        1.10     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.10     HN        0.97     KP        0.86     
!   LA        1.02     MK        1.00*    NL        1.07     OV        1.08     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.06     HN        0.99     KP        0.83     
!   LA        1.11     MK        1.00*    NL        1.02     OV        1.07     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.04     KP        0.79     
!   LA        1.03     MK        1.00*    NL        1.05     OV        1.06     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.07     HN        0.95     KP        0.91     
!   LA        1.04     MK        1.00*    NL        0.97     OV        1.07     
!   PT        0.96     SC        0.90     
! 
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.03     HN        0.87     KP        0.87     
!   LA        1.01     MK        1.00*    NL        1.05     OV        1.05     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.02     HN        0.85     KP        0.95     
!   LA        1.05     MK        1.00*    NL        1.00     OV        0.99     
!   PT        0.96     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.080263Jy  sigma=0.000754
! Fit after  self-cal, rms=0.077796Jy  sigma=0.000752
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=3.875 mas, bpa=15.67 degrees
! Estimated noise=307.763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505121 Jy
! Component: 100  -  total flux cleaned = 0.000518237 Jy
! Component: 150  -  total flux cleaned = 0.000519046 Jy
! Component: 200  -  total flux cleaned = 0.000519285 Jy
! Total flux subtracted in 200 components = 0.000519285 Jy
! Clean residual min=-0.000893 max=0.000856 Jy/beam
! Clean residual mean=0.000004 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0499152 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 37 components and 0.0499152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077791Jy  sigma=0.000752
! Fit after  self-cal, rms=0.077738Jy  sigma=0.000752
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077738Jy  sigma=0.000752
! Fit after  self-cal, rms=0.077697Jy  sigma=0.000751
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=3.864 mas, bpa=15.66 degrees
! Estimated noise=308.314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362136 Jy
! Component: 100  -  total flux cleaned = 0.000394131 Jy
! Component: 150  -  total flux cleaned = 0.000403122 Jy
! Component: 200  -  total flux cleaned = 0.000412039 Jy
! Total flux subtracted in 200 components = 0.000412039 Jy
! Clean residual min=-0.000802 max=0.000836 Jy/beam
! Clean residual mean=0.000002 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0503273 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.0503273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077693Jy  sigma=0.000751
! Fit after  self-cal, rms=0.077695Jy  sigma=0.000751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.56271e-06 Jy
! Component: 100  -  total flux cleaned = 5.33559e-06 Jy
! Component: 150  -  total flux cleaned = 1.41407e-05 Jy
! Component: 200  -  total flux cleaned = 2.22111e-05 Jy
! Total flux subtracted in 200 components = 2.22111e-05 Jy
! Clean residual min=-0.000845 max=0.000857 Jy/beam
! Clean residual mean=0.000003 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0503495 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 46 components and 0.0503495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077692Jy  sigma=0.000751
! Fit after  self-cal, rms=0.077690Jy  sigma=0.000751
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077690Jy  sigma=0.000751
! Fit after  self-cal, rms=0.077549Jy  sigma=0.000751
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=3.854 mas, bpa=15.71 degrees
! Estimated noise=307.396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197471 Jy
! Component: 100  -  total flux cleaned = 0.00019768 Jy
! Component: 150  -  total flux cleaned = 0.000217439 Jy
! Component: 200  -  total flux cleaned = 0.000234981 Jy
! Total flux subtracted in 200 components = 0.000234981 Jy
! Clean residual min=-0.000792 max=0.000805 Jy/beam
! Clean residual mean=0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0505845 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 51 components and 0.0505845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077545Jy  sigma=0.000751
! Fit after  self-cal, rms=0.077561Jy  sigma=0.000751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.36326e-05 Jy
! Component: 100  -  total flux cleaned = 5.14285e-05 Jy
! Component: 150  -  total flux cleaned = 5.97222e-05 Jy
! Component: 200  -  total flux cleaned = 5.98712e-05 Jy
! Total flux subtracted in 200 components = 5.98712e-05 Jy
! Clean residual min=-0.000832 max=0.000807 Jy/beam
! Clean residual mean=0.000001 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0506443 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 51 components and 0.0506443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077558Jy  sigma=0.000751
! Fit after  self-cal, rms=0.077556Jy  sigma=0.000750
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077556Jy  sigma=0.000750
! Fit after  self-cal, rms=0.077366Jy  sigma=0.000750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.225 mas, bmaj=5.499 mas, bpa=4.759 degrees
! Estimated noise=359.909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.39469e-05 Jy
! Component: 100  -  total flux cleaned = 8.36354e-05 Jy
! Component: 150  -  total flux cleaned = 8.20396e-05 Jy
! Component: 200  -  total flux cleaned = 8.21416e-05 Jy
! Total flux subtracted in 200 components = 8.21416e-05 Jy
! Clean residual min=-0.000746 max=0.000760 Jy/beam
! Clean residual mean=-0.000001 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0507265 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 54 components and 0.0507265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077365Jy  sigma=0.000750
! Fit after  self-cal, rms=0.077368Jy  sigma=0.000750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.66282e-05 Jy
! Component: 100  -  total flux cleaned = 2.57667e-06 Jy
! Component: 150  -  total flux cleaned = 8.87051e-06 Jy
! Component: 200  -  total flux cleaned = 8.94079e-06 Jy
! Total flux subtracted in 200 components = 8.94079e-06 Jy
! Clean residual min=-0.000742 max=0.000756 Jy/beam
! Clean residual mean=-0.000001 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.0507354 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 56 components and 0.0507354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077368Jy  sigma=0.000750
! Fit after  self-cal, rms=0.077366Jy  sigma=0.000750
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=3.846 mas, bpa=15.75 degrees
! Estimated noise=306.466 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 3.846 at 15.75 degrees (North through East)
! Clean map  min=-0.00082446  max=0.047183 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8108 mas, bmaj=3.569 mas, bpa=18.05 degrees
! Estimated noise=591.66 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.035521 Jy
! Component: 100  -  total flux cleaned = 0.0435571 Jy
! Component: 150  -  total flux cleaned = 0.0465169 Jy
! Component: 200  -  total flux cleaned = 0.0481884 Jy
! Total flux subtracted in 200 components = 0.0481884 Jy
! Clean residual min=-0.001919 max=0.001981 Jy/beam
! Clean residual mean=-0.000003 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.0481884 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0481884 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=3.846 mas, bpa=15.75 degrees
! Estimated noise=306.466 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168721 Jy
! Component: 100  -  total flux cleaned = 0.00228355 Jy
! Component: 150  -  total flux cleaned = 0.00250275 Jy
! Component: 200  -  total flux cleaned = 0.00254615 Jy
! Total flux subtracted in 200 components = 0.00254615 Jy
! Clean residual min=-0.000892 max=0.000891 Jy/beam
! Clean residual mean=0.000000 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.0507345 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.0507345 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.225 mas, bmaj=5.499 mas, bpa=4.759 degrees
! Estimated noise=359.909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106821 Jy
! Component: 100  -  total flux cleaned = -7.76473e-05 Jy
! Component: 150  -  total flux cleaned = -6.52469e-05 Jy
! Component: 200  -  total flux cleaned = -6.54371e-05 Jy
! Total flux subtracted in 200 components = -6.54371e-05 Jy
! Clean residual min=-0.000775 max=0.000776 Jy/beam
! Clean residual mean=-0.000001 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0506691 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.0635e-07 Jy
! Component: 100  -  total flux cleaned = 9.90866e-06 Jy
! Component: 150  -  total flux cleaned = 9.96075e-06 Jy
! Component: 200  -  total flux cleaned = 9.87795e-06 Jy
! Total flux subtracted in 200 components = 9.87795e-06 Jy
! Clean residual min=-0.000766 max=0.000770 Jy/beam
! Clean residual mean=-0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.050679 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.050679 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=3.846 mas, bpa=15.75 degrees
! Estimated noise=306.466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.36723e-05 Jy
! Component: 100  -  total flux cleaned = -2.71731e-07 Jy
! Component: 150  -  total flux cleaned = 1.12982e-05 Jy
! Component: 200  -  total flux cleaned = 1.09613e-05 Jy
! Total flux subtracted in 200 components = 1.09613e-05 Jy
! Clean residual min=-0.000875 max=0.000847 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.0506899 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.0506899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077370Jy  sigma=0.000750
! Fit after  self-cal, rms=0.077379Jy  sigma=0.000750
wmodel J0739-2420_X_2014_08_05_pus_map.mod
! Writing 52 model components to file: J0739-2420_X_2014_08_05_pus_map.mod
wobs J0739-2420_X_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0739-2420_X_2014_08_05_pus_uvs.fits
wwins J0739-2420_X_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J0739-2420_X_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00015596 Jy
! Component: 100  -  total flux cleaned = -0.000261066 Jy
! Component: 150  -  total flux cleaned = -0.000420712 Jy
! Component: 200  -  total flux cleaned = -0.000548438 Jy
! Component: 250  -  total flux cleaned = -0.000637088 Jy
! Component: 300  -  total flux cleaned = -0.000732523 Jy
! Component: 350  -  total flux cleaned = -0.000803503 Jy
! Component: 400  -  total flux cleaned = -0.000881647 Jy
! Component: 450  -  total flux cleaned = -0.000928686 Jy
! Component: 500  -  total flux cleaned = -0.00091038 Jy
! Component: 550  -  total flux cleaned = -0.000901645 Jy
! Component: 600  -  total flux cleaned = -0.000892943 Jy
! Component: 650  -  total flux cleaned = -0.000875816 Jy
! Component: 700  -  total flux cleaned = -0.00089249 Jy
! Component: 750  -  total flux cleaned = -0.000876128 Jy
! Component: 800  -  total flux cleaned = -0.000900114 Jy
! Component: 850  -  total flux cleaned = -0.00090006 Jy
! Component: 900  -  total flux cleaned = -0.000876794 Jy
! Component: 950  -  total flux cleaned = -0.000892144 Jy
! Component: 1000  -  total flux cleaned = -0.00086961 Jy
! Component: 1050  -  total flux cleaned = -0.000869672 Jy
! Component: 1100  -  total flux cleaned = -0.000862368 Jy
! Component: 1150  -  total flux cleaned = -0.000840946 Jy
! Component: 1200  -  total flux cleaned = -0.000841001 Jy
! Component: 1250  -  total flux cleaned = -0.00084773 Jy
! Component: 1300  -  total flux cleaned = -0.000840656 Jy
! Component: 1350  -  total flux cleaned = -0.000847356 Jy
! Component: 1400  -  total flux cleaned = -0.000833916 Jy
! Component: 1450  -  total flux cleaned = -0.000847144 Jy
! Component: 1500  -  total flux cleaned = -0.000840604 Jy
! Component: 1550  -  total flux cleaned = -0.000847034 Jy
! Component: 1600  -  total flux cleaned = -0.000840768 Jy
! Component: 1650  -  total flux cleaned = -0.000872353 Jy
! Component: 1700  -  total flux cleaned = -0.00085983 Jy
! Component: 1750  -  total flux cleaned = -0.000872208 Jy
! Component: 1800  -  total flux cleaned = -0.000884434 Jy
! Component: 1850  -  total flux cleaned = -0.000902561 Jy
! Component: 1900  -  total flux cleaned = -0.000908554 Jy
! Component: 1950  -  total flux cleaned = -0.000914519 Jy
! Component: 2000  -  total flux cleaned = -0.000932178 Jy
! Total flux subtracted in 2048 components = -0.000937943 Jy
! Clean residual min=-0.000375 max=0.000303 Jy/beam
! Clean residual mean=0.000003 rms=0.000119 Jy/beam
! Combined flux in latest and established models = 0.049752 Jy
keep
! Adding 150 model components to the UV plane model.
! The established model now contains 202 components and 0.049752 Jy
![Exited script file: muppet]
wmap "J0739-2420_X_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 3.846 at 15.75 degrees (North through East)
! Clean map  min=-0.00095994  max=0.046599 Jy/beam
! Writing clean map to FITS file: J0739-2420_X_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.046599 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00011735 
device "J0739-2420_X_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0739-2420_X_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.75549 0.75549 1.51098 3.02196 6.04392 12.0878 24.1757 48.3514 96.7028
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.046 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 3.846 at 15.75 degrees (North through East)
! Clean map  min=-0.00095994  max=0.046599 Jy/beam
quit
! Quitting program
! Log file J0739-2420_X_2014_08_05_pus_uvs.log closed on Sat Nov 12 21:08:38 2016