! Started logfile: J0739+7527_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:20:32 2017 obs J0739+7527_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0739+7527_S_2014_01_04_pus_uva.fits ! AN table 1: 62 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0739+7527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5208 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0739+7527_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904839Jy sigma=0.011594 ! Fit after self-cal, rms=0.831443Jy sigma=0.010498 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=13.14 mas, bpa=61.47 degrees ! Estimated noise=1657.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127549 Jy ! Component: 100 - total flux cleaned = 0.157632 Jy ! Total flux subtracted in 100 components = 0.157632 Jy ! Clean residual min=-0.011815 max=0.013523 Jy/beam ! Clean residual mean=0.000007 rms=0.003280 Jy/beam ! Combined flux in latest and established models = 0.157632 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.157632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095819Jy sigma=0.001007 ! Fit after self-cal, rms=0.095840Jy sigma=0.001007 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=13.49 mas, bpa=60.67 degrees ! Estimated noise=830.038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226846 Jy ! Component: 100 - total flux cleaned = 0.0339338 Jy ! Component: 150 - total flux cleaned = 0.0412079 Jy ! Component: 200 - total flux cleaned = 0.0466553 Jy ! Total flux subtracted in 200 components = 0.0466553 Jy ! Clean residual min=-0.006139 max=0.005889 Jy/beam ! Clean residual mean=0.000021 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.204287 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 54 components and 0.204287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090411Jy sigma=0.000932 ! Fit after self-cal, rms=0.090320Jy sigma=0.000932 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 1.00 ! MK 0.97 NL 0.97 OV 0.95 PT 1.01 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 1.02 ! MK 0.98 NL 1.00 OV 1.02 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.79 ! MK 1.05 NL 0.99 OV 0.90 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.87 ! MK 1.04 NL 1.06 OV 0.98 PT 0.98 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.090320Jy sigma=0.000932 ! Fit after self-cal, rms=0.086119Jy sigma=0.000900 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=13.46 mas, bpa=60.7 degrees ! Estimated noise=818.115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130146 Jy ! Component: 100 - total flux cleaned = 0.000189095 Jy ! Component: 150 - total flux cleaned = 0.000283074 Jy ! Component: 200 - total flux cleaned = 0.000488069 Jy ! Total flux subtracted in 200 components = 0.000488069 Jy ! Clean residual min=-0.002728 max=0.002784 Jy/beam ! Clean residual mean=0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.204775 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.204775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086010Jy sigma=0.000900 ! Fit after self-cal, rms=0.085782Jy sigma=0.000899 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085782Jy sigma=0.000899 ! Fit after self-cal, rms=0.085682Jy sigma=0.000899 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=13.46 mas, bpa=60.71 degrees ! Estimated noise=816.837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.39361e-06 Jy ! Component: 100 - total flux cleaned = 3.90231e-05 Jy ! Component: 150 - total flux cleaned = 0.000121674 Jy ! Component: 200 - total flux cleaned = 0.000221546 Jy ! Total flux subtracted in 200 components = 0.000221546 Jy ! Clean residual min=-0.002478 max=0.002715 Jy/beam ! Clean residual mean=0.000000 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.204996 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.204996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085646Jy sigma=0.000899 ! Fit after self-cal, rms=0.085646Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-122.5, 99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155094 Jy ! Component: 100 - total flux cleaned = 0.00043657 Jy ! Component: 150 - total flux cleaned = 0.000763542 Jy ! Component: 200 - total flux cleaned = 0.00103709 Jy ! Total flux subtracted in 200 components = 0.00103709 Jy ! Clean residual min=-0.001715 max=0.002009 Jy/beam ! Clean residual mean=-0.000000 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.206034 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.206034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085512Jy sigma=0.000897 ! Fit after self-cal, rms=0.085516Jy sigma=0.000897 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085516Jy sigma=0.000897 ! Fit after self-cal, rms=0.085592Jy sigma=0.000897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=13.46 mas, bpa=60.71 degrees ! Estimated noise=816.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002304 Jy ! Component: 100 - total flux cleaned = 0.000545025 Jy ! Component: 150 - total flux cleaned = 0.000718941 Jy ! Component: 200 - total flux cleaned = 0.000811435 Jy ! Total flux subtracted in 200 components = 0.000811435 Jy ! Clean residual min=-0.001598 max=0.001926 Jy/beam ! Clean residual mean=-0.000000 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.206845 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.206845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085556Jy sigma=0.000897 ! Fit after self-cal, rms=0.085557Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032308 Jy ! Component: 100 - total flux cleaned = 0.000296442 Jy ! Component: 150 - total flux cleaned = 0.000243648 Jy ! Component: 200 - total flux cleaned = 0.000145983 Jy ! Total flux subtracted in 200 components = 0.000145983 Jy ! Clean residual min=-0.001523 max=0.001844 Jy/beam ! Clean residual mean=-0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.206991 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 145 components and 0.206991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085539Jy sigma=0.000897 ! Fit after self-cal, rms=0.085539Jy sigma=0.000897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085539Jy sigma=0.000897 ! Fit after self-cal, rms=0.085632Jy sigma=0.000897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.331 mas, bmaj=15.41 mas, bpa=58.74 degrees ! Estimated noise=936.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145013 Jy ! Component: 100 - total flux cleaned = 0.000168646 Jy ! Component: 150 - total flux cleaned = 0.000166741 Jy ! Component: 200 - total flux cleaned = 0.000196149 Jy ! Total flux subtracted in 200 components = 0.000196149 Jy ! Clean residual min=-0.001159 max=0.001334 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.207187 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 165 components and 0.207187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085629Jy sigma=0.000897 ! Fit after self-cal, rms=0.085635Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.70115e-05 Jy ! Component: 100 - total flux cleaned = -0.000160262 Jy ! Component: 150 - total flux cleaned = -0.000119446 Jy ! Component: 200 - total flux cleaned = -0.000131849 Jy ! Total flux subtracted in 200 components = -0.000131849 Jy ! Clean residual min=-0.001074 max=0.001253 Jy/beam ! Clean residual mean=0.000000 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.207055 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 177 components and 0.207055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085634Jy sigma=0.000896 ! Fit after self-cal, rms=0.085634Jy sigma=0.000896 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=13.47 mas, bpa=60.71 degrees ! Estimated noise=817.313 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 13.47 at 60.71 degrees (North through East) ! Clean map min=-0.0028899 max=0.17045 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.396 mas, bmaj=13.06 mas, bpa=61.54 degrees ! Estimated noise=1669.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128367 Jy ! Component: 100 - total flux cleaned = 0.158596 Jy ! Component: 150 - total flux cleaned = 0.172841 Jy ! Component: 200 - total flux cleaned = 0.180454 Jy ! Total flux subtracted in 200 components = 0.180454 Jy ! Clean residual min=-0.005566 max=0.005831 Jy/beam ! Clean residual mean=0.000002 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.180454 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.180454 Jy ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=13.47 mas, bpa=60.71 degrees ! Estimated noise=817.313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00859926 Jy ! Component: 100 - total flux cleaned = 0.0111394 Jy ! Component: 150 - total flux cleaned = 0.0138357 Jy ! Component: 200 - total flux cleaned = 0.0159972 Jy ! Total flux subtracted in 200 components = 0.0159972 Jy ! Clean residual min=-0.002477 max=0.002532 Jy/beam ! Clean residual mean=0.000008 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.196452 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 0.196452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.331 mas, bmaj=15.41 mas, bpa=58.74 degrees ! Estimated noise=936.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235 Jy ! Component: 100 - total flux cleaned = 0.00371348 Jy ! Component: 150 - total flux cleaned = 0.00481769 Jy ! Component: 200 - total flux cleaned = 0.00576797 Jy ! Total flux subtracted in 200 components = 0.00576797 Jy ! Clean residual min=-0.001694 max=0.001718 Jy/beam ! Clean residual mean=0.000007 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.20222 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793708 Jy ! Component: 100 - total flux cleaned = 0.001463 Jy ! Component: 150 - total flux cleaned = 0.00203184 Jy ! Component: 200 - total flux cleaned = 0.00252056 Jy ! Total flux subtracted in 200 components = 0.00252056 Jy ! Clean residual min=-0.001372 max=0.001533 Jy/beam ! Clean residual mean=0.000003 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.20474 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 113 components and 0.20474 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=13.47 mas, bpa=60.71 degrees ! Estimated noise=817.313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.5634e-05 Jy ! Component: 100 - total flux cleaned = 0.000146424 Jy ! Component: 150 - total flux cleaned = 0.000338078 Jy ! Component: 200 - total flux cleaned = 0.000551968 Jy ! Total flux subtracted in 200 components = 0.000551968 Jy ! Clean residual min=-0.001706 max=0.002173 Jy/beam ! Clean residual mean=0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.205292 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 130 components and 0.205292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085688Jy sigma=0.000897 ! Fit after self-cal, rms=0.085707Jy sigma=0.000897 wmodel J0739+7527_S_2014_01_04_pus_map.mod ! Writing 130 model components to file: J0739+7527_S_2014_01_04_pus_map.mod wobs J0739+7527_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0739+7527_S_2014_01_04_pus_uvs.fits wwins J0739+7527_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0739+7527_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085765 Jy ! Component: 100 - total flux cleaned = 0.00103216 Jy ! Component: 150 - total flux cleaned = 0.000953617 Jy ! Component: 200 - total flux cleaned = 0.00085432 Jy ! Component: 250 - total flux cleaned = 0.000686579 Jy ! Component: 300 - total flux cleaned = 0.000478945 Jy ! Component: 350 - total flux cleaned = 0.000256707 Jy ! Component: 400 - total flux cleaned = 6.33319e-05 Jy ! Component: 450 - total flux cleaned = -8.22505e-05 Jy ! Component: 500 - total flux cleaned = -0.000223227 Jy ! Component: 550 - total flux cleaned = -0.000360551 Jy ! Component: 600 - total flux cleaned = -0.000494304 Jy ! Component: 650 - total flux cleaned = -0.000643075 Jy ! Component: 700 - total flux cleaned = -0.000788009 Jy ! Component: 750 - total flux cleaned = -0.000876797 Jy ! Component: 800 - total flux cleaned = -0.00101575 Jy ! Component: 850 - total flux cleaned = -0.00113448 Jy ! Component: 900 - total flux cleaned = -0.00120094 Jy ! Component: 950 - total flux cleaned = -0.00128255 Jy ! Component: 1000 - total flux cleaned = -0.00134641 Jy ! Component: 1050 - total flux cleaned = -0.00134639 Jy ! Component: 1100 - total flux cleaned = -0.00137739 Jy ! Component: 1150 - total flux cleaned = -0.00136184 Jy ! Component: 1200 - total flux cleaned = -0.00139168 Jy ! Component: 1250 - total flux cleaned = -0.00136193 Jy ! Component: 1300 - total flux cleaned = -0.00134722 Jy ! Component: 1350 - total flux cleaned = -0.00133263 Jy ! Component: 1400 - total flux cleaned = -0.00133281 Jy ! Component: 1450 - total flux cleaned = -0.00136119 Jy ! Component: 1500 - total flux cleaned = -0.0013752 Jy ! Component: 1550 - total flux cleaned = -0.0013888 Jy ! Component: 1600 - total flux cleaned = -0.00144353 Jy ! Component: 1650 - total flux cleaned = -0.00145695 Jy ! Component: 1700 - total flux cleaned = -0.00148375 Jy ! Component: 1750 - total flux cleaned = -0.00152379 Jy ! Component: 1800 - total flux cleaned = -0.00157645 Jy ! Component: 1850 - total flux cleaned = -0.00162853 Jy ! Component: 1900 - total flux cleaned = -0.00164136 Jy ! Component: 1950 - total flux cleaned = -0.00165416 Jy ! Component: 2000 - total flux cleaned = -0.00167969 Jy ! Component: 2050 - total flux cleaned = -0.00171739 Jy ! Component: 2100 - total flux cleaned = -0.00172973 Jy ! Component: 2150 - total flux cleaned = -0.00171742 Jy ! Component: 2200 - total flux cleaned = -0.00175445 Jy ! Component: 2250 - total flux cleaned = -0.00176667 Jy ! Component: 2300 - total flux cleaned = -0.00179093 Jy ! Component: 2350 - total flux cleaned = -0.00179104 Jy ! Component: 2400 - total flux cleaned = -0.00180294 Jy ! Component: 2450 - total flux cleaned = -0.00182653 Jy ! Component: 2500 - total flux cleaned = -0.00181461 Jy ! Component: 2550 - total flux cleaned = -0.00179123 Jy ! Component: 2600 - total flux cleaned = -0.00182622 Jy ! Component: 2650 - total flux cleaned = -0.00184953 Jy ! Component: 2700 - total flux cleaned = -0.00184956 Jy ! Component: 2750 - total flux cleaned = -0.00190696 Jy ! Component: 2800 - total flux cleaned = -0.00192977 Jy ! Component: 2850 - total flux cleaned = -0.0019638 Jy ! Component: 2900 - total flux cleaned = -0.00196376 Jy ! Component: 2950 - total flux cleaned = -0.00200873 Jy ! Component: 3000 - total flux cleaned = -0.00205344 Jy ! Component: 3050 - total flux cleaned = -0.00206462 Jy ! Component: 3100 - total flux cleaned = -0.00206462 Jy ! Component: 3150 - total flux cleaned = -0.00207569 Jy ! Component: 3200 - total flux cleaned = -0.00203162 Jy ! Component: 3250 - total flux cleaned = -0.00202065 Jy ! Component: 3300 - total flux cleaned = -0.00199867 Jy ! Component: 3350 - total flux cleaned = -0.00199865 Jy ! Component: 3400 - total flux cleaned = -0.00196592 Jy ! Component: 3450 - total flux cleaned = -0.00193327 Jy ! Component: 3500 - total flux cleaned = -0.00190069 Jy ! Component: 3550 - total flux cleaned = -0.001879 Jy ! Component: 3600 - total flux cleaned = -0.001879 Jy ! Component: 3650 - total flux cleaned = -0.00183566 Jy ! Component: 3700 - total flux cleaned = -0.00183565 Jy ! Component: 3750 - total flux cleaned = -0.00181398 Jy ! Component: 3800 - total flux cleaned = -0.00177086 Jy ! Component: 3850 - total flux cleaned = -0.0017709 Jy ! Component: 3900 - total flux cleaned = -0.00173861 Jy ! Component: 3950 - total flux cleaned = -0.00172785 Jy ! Component: 4000 - total flux cleaned = -0.00168479 Jy ! Component: 4050 - total flux cleaned = -0.00166335 Jy ! Total flux subtracted in 4096 components = -0.00163111 Jy ! Clean residual min=-0.000689 max=0.000606 Jy/beam ! Clean residual mean=0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.203661 Jy keep ! Adding 184 model components to the UV plane model. ! The established model now contains 314 components and 0.203661 Jy ![Exited script file: muppet] wmap "J0739+7527_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 13.47 at 60.71 degrees (North through East) ! Clean map min=-0.002245 max=0.17074 Jy/beam ! Writing clean map to FITS file: J0739+7527_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170744 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019407 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.340983 0.340983 0.681966 1.36393 2.72786 5.45573 10.9115 21.8229 43.6458 87.2917 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 13.47 at 60.71 degrees (North through East) ! Clean map min=-0.002245 max=0.17074 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0739+7527_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:36 2017