! Started logfile: J0739+0137_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:09:44 2017 obs J0739+0137_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0739+0137_S_2015_01_23_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.908148 visibilities/baseline/integration-bin. ! Found source: J0739+0137 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0739+0137_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.473830Jy sigma=0.004219 ! Fit after self-cal, rms=0.443688Jy sigma=0.003944 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=6.833 mas, bpa=-8.046 degrees ! Estimated noise=1718.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.508499 Jy ! Component: 100 - total flux cleaned = 0.657876 Jy ! Total flux subtracted in 100 components = 0.657876 Jy ! Clean residual min=-0.054026 max=0.066074 Jy/beam ! Clean residual mean=-0.000107 rms=0.014990 Jy/beam ! Combined flux in latest and established models = 0.657876 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.657876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334134Jy sigma=0.002294 ! Fit after self-cal, rms=0.334144Jy sigma=0.002293 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=7.389 mas, bpa=-6.688 degrees ! Estimated noise=1538.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0979656 Jy ! Component: 100 - total flux cleaned = 0.148052 Jy ! Component: 150 - total flux cleaned = 0.176284 Jy ! Component: 200 - total flux cleaned = 0.193203 Jy ! Total flux subtracted in 200 components = 0.193203 Jy ! Clean residual min=-0.043445 max=0.068831 Jy/beam ! Clean residual mean=-0.000021 rms=0.015412 Jy/beam ! Combined flux in latest and established models = 0.851079 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 0.851079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298421Jy sigma=0.001844 ! Fit after self-cal, rms=0.298738Jy sigma=0.001843 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.76 HN 1.05 KP 0.98 ! LA 1.37 MK 1.02 NL 0.94 OV 1.04 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 1.13 KP 0.90 ! LA 1.31 MK 1.00 NL 0.80 OV 1.06 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.13 KP 0.77 ! LA 1.10 MK 1.04 NL 1.30 OV 0.99 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.06 KP 0.73 ! LA 1.16 MK 1.00 NL 1.01 OV 1.03 ! PT 0.93 SC 0.96 ! ! ! Fit before self-cal, rms=0.298738Jy sigma=0.001843 ! Fit after self-cal, rms=0.238721Jy sigma=0.001301 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=7.44 mas, bpa=-6.376 degrees ! Estimated noise=1530.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060107 Jy ! Component: 100 - total flux cleaned = 0.0906337 Jy ! Component: 150 - total flux cleaned = 0.098508 Jy ! Component: 200 - total flux cleaned = 0.100807 Jy ! Total flux subtracted in 200 components = 0.100807 Jy ! Clean residual min=-0.021225 max=0.018339 Jy/beam ! Clean residual mean=0.000022 rms=0.005101 Jy/beam ! Combined flux in latest and established models = 0.951886 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 72 components and 0.951886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222730Jy sigma=0.000959 ! Fit after self-cal, rms=0.221669Jy sigma=0.000945 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221669Jy sigma=0.000945 ! Fit after self-cal, rms=0.219519Jy sigma=0.000917 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.432 mas, bpa=-6.577 degrees ! Estimated noise=1518.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187694 Jy ! Component: 100 - total flux cleaned = 0.0265388 Jy ! Component: 150 - total flux cleaned = 0.0272048 Jy ! Component: 200 - total flux cleaned = 0.0274939 Jy ! Total flux subtracted in 200 components = 0.0274939 Jy ! Clean residual min=-0.013999 max=0.012373 Jy/beam ! Clean residual mean=0.000007 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.97938 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.97938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217598Jy sigma=0.000869 ! Fit after self-cal, rms=0.217179Jy sigma=0.000865 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461116 Jy ! Component: 100 - total flux cleaned = 0.00530077 Jy ! Component: 150 - total flux cleaned = 0.00509177 Jy ! Component: 200 - total flux cleaned = 0.00472876 Jy ! Total flux subtracted in 200 components = 0.00472876 Jy ! Clean residual min=-0.013347 max=0.011449 Jy/beam ! Clean residual mean=0.000015 rms=0.003138 Jy/beam ! Combined flux in latest and established models = 0.984109 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 0.984109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216690Jy sigma=0.000854 ! Fit after self-cal, rms=0.216570Jy sigma=0.000853 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216570Jy sigma=0.000853 ! Fit after self-cal, rms=0.216147Jy sigma=0.000846 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=7.417 mas, bpa=-6.521 degrees ! Estimated noise=1517.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00802884 Jy ! Component: 100 - total flux cleaned = 0.00992338 Jy ! Component: 150 - total flux cleaned = 0.0102763 Jy ! Component: 200 - total flux cleaned = 0.0102773 Jy ! Total flux subtracted in 200 components = 0.0102773 Jy ! Clean residual min=-0.009968 max=0.010733 Jy/beam ! Clean residual mean=0.000004 rms=0.002611 Jy/beam ! Combined flux in latest and established models = 0.994386 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 0.994386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215713Jy sigma=0.000835 ! Fit after self-cal, rms=0.215596Jy sigma=0.000834 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607979 Jy ! Component: 100 - total flux cleaned = 0.00105776 Jy ! Component: 150 - total flux cleaned = 0.0011982 Jy ! Component: 200 - total flux cleaned = 0.00120043 Jy ! Total flux subtracted in 200 components = 0.00120043 Jy ! Clean residual min=-0.009642 max=0.010507 Jy/beam ! Clean residual mean=0.000005 rms=0.002481 Jy/beam ! Combined flux in latest and established models = 0.995587 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.995587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215416Jy sigma=0.000830 ! Fit after self-cal, rms=0.215343Jy sigma=0.000829 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215343Jy sigma=0.000829 ! Fit after self-cal, rms=0.215400Jy sigma=0.000827 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.566 mas, bmaj=11.93 mas, bpa=7.422 degrees ! Estimated noise=1951.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721602 Jy ! Component: 100 - total flux cleaned = 0.00814018 Jy ! Component: 150 - total flux cleaned = 0.00814011 Jy ! Component: 200 - total flux cleaned = 0.00837614 Jy ! Total flux subtracted in 200 components = 0.00837614 Jy ! Clean residual min=-0.009529 max=0.013213 Jy/beam ! Clean residual mean=0.000013 rms=0.003060 Jy/beam ! Combined flux in latest and established models = 1.00396 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 150 components and 1.00396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215145Jy sigma=0.000824 ! Fit after self-cal, rms=0.215076Jy sigma=0.000823 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-99.5, 49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00883123 Jy ! Component: 100 - total flux cleaned = 0.0086309 Jy ! Component: 150 - total flux cleaned = 0.00843624 Jy ! Component: 200 - total flux cleaned = 0.00810171 Jy ! Total flux subtracted in 200 components = 0.00810171 Jy ! Clean residual min=-0.008492 max=0.006619 Jy/beam ! Clean residual mean=0.000035 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 1.01206 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 192 components and 1.01206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214664Jy sigma=0.000814 ! Fit after self-cal, rms=0.214614Jy sigma=0.000814 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=7.41 mas, bpa=-6.507 degrees ! Estimated noise=1517.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.37 x 7.41 at -6.507 degrees (North through East) ! Clean map min=-0.015406 max=0.66759 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214614Jy sigma=0.000814 ! Fit after self-cal, rms=0.216736Jy sigma=0.000748 ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=7.413 mas, bpa=-6.512 degrees ! Estimated noise=1517.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307484 Jy ! Component: 100 - total flux cleaned = 0.0032413 Jy ! Component: 150 - total flux cleaned = 0.00387276 Jy ! Component: 200 - total flux cleaned = 0.00414969 Jy ! Total flux subtracted in 200 components = 0.00414969 Jy ! Clean residual min=-0.006904 max=0.006226 Jy/beam ! Clean residual mean=0.000009 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 1.01621 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 224 components and 1.01621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216348Jy sigma=0.000741 ! Fit after self-cal, rms=0.216320Jy sigma=0.000741 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144384 Jy ! Component: 100 - total flux cleaned = 1.84555e-05 Jy ! Component: 150 - total flux cleaned = -0.000217295 Jy ! Component: 200 - total flux cleaned = -0.000438603 Jy ! Total flux subtracted in 200 components = -0.000438603 Jy ! Clean residual min=-0.006352 max=0.005740 Jy/beam ! Clean residual mean=0.000009 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 1.01578 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 241 components and 1.01578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216101Jy sigma=0.000738 ! Fit after self-cal, rms=0.216098Jy sigma=0.000738 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216098Jy sigma=0.000738 ! Fit after self-cal, rms=0.215854Jy sigma=0.000738 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.829 mas, bpa=-7.692 degrees ! Estimated noise=1697.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.502072 Jy ! Component: 100 - total flux cleaned = 0.647296 Jy ! Component: 150 - total flux cleaned = 0.72787 Jy ! Component: 200 - total flux cleaned = 0.78206 Jy ! Total flux subtracted in 200 components = 0.78206 Jy ! Clean residual min=-0.026674 max=0.031204 Jy/beam ! Clean residual mean=-0.000122 rms=0.007491 Jy/beam ! Combined flux in latest and established models = 0.78206 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.78206 Jy ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=7.409 mas, bpa=-6.489 degrees ! Estimated noise=1516.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058743 Jy ! Component: 100 - total flux cleaned = 0.100093 Jy ! Component: 150 - total flux cleaned = 0.130299 Jy ! Component: 200 - total flux cleaned = 0.152983 Jy ! Total flux subtracted in 200 components = 0.152983 Jy ! Clean residual min=-0.013462 max=0.015408 Jy/beam ! Clean residual mean=-0.000107 rms=0.004292 Jy/beam ! Combined flux in latest and established models = 0.935043 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 69 components and 0.935042 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.559 mas, bmaj=11.92 mas, bpa=7.385 degrees ! Estimated noise=1949.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298231 Jy ! Component: 100 - total flux cleaned = 0.0452431 Jy ! Component: 150 - total flux cleaned = 0.0521364 Jy ! Component: 200 - total flux cleaned = 0.0574884 Jy ! Total flux subtracted in 200 components = 0.0574884 Jy ! Clean residual min=-0.009379 max=0.009869 Jy/beam ! Clean residual mean=-0.000055 rms=0.003008 Jy/beam ! Combined flux in latest and established models = 0.992531 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305469 Jy ! Component: 100 - total flux cleaned = 0.00592158 Jy ! Component: 150 - total flux cleaned = 0.00836421 Jy ! Component: 200 - total flux cleaned = 0.0106267 Jy ! Total flux subtracted in 200 components = 0.0106267 Jy ! Clean residual min=-0.007461 max=0.006372 Jy/beam ! Clean residual mean=-0.000021 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 1.00316 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 159 components and 1.00316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=7.409 mas, bpa=-6.489 degrees ! Estimated noise=1516.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036857 Jy ! Component: 100 - total flux cleaned = 0.00419772 Jy ! Component: 150 - total flux cleaned = 0.00507531 Jy ! Component: 200 - total flux cleaned = 0.00583865 Jy ! Total flux subtracted in 200 components = 0.00583865 Jy ! Clean residual min=-0.007159 max=0.006475 Jy/beam ! Clean residual mean=-0.000002 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 1.009 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 184 components and 1.009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215690Jy sigma=0.000746 ! Fit after self-cal, rms=0.215642Jy sigma=0.000744 wmodel J0739+0137_S_2015_01_23_pus_map.mod ! Writing 184 model components to file: J0739+0137_S_2015_01_23_pus_map.mod wobs J0739+0137_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0739+0137_S_2015_01_23_pus_uvs.fits wwins J0739+0137_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0739+0137_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102933 Jy ! Component: 100 - total flux cleaned = -0.00136251 Jy ! Component: 150 - total flux cleaned = -0.00199318 Jy ! Component: 200 - total flux cleaned = -0.00258123 Jy ! Component: 250 - total flux cleaned = -0.00295407 Jy ! Component: 300 - total flux cleaned = -0.00322281 Jy ! Component: 350 - total flux cleaned = -0.00322304 Jy ! Component: 400 - total flux cleaned = -0.003307 Jy ! Component: 450 - total flux cleaned = -0.00338673 Jy ! Component: 500 - total flux cleaned = -0.00307995 Jy ! Component: 550 - total flux cleaned = -0.00270579 Jy ! Component: 600 - total flux cleaned = -0.00241451 Jy ! Component: 650 - total flux cleaned = -0.00205761 Jy ! Component: 700 - total flux cleaned = -0.00198627 Jy ! Component: 750 - total flux cleaned = -0.0017154 Jy ! Component: 800 - total flux cleaned = -0.00158346 Jy ! Component: 850 - total flux cleaned = -0.00132651 Jy ! Component: 900 - total flux cleaned = -0.00126386 Jy ! Component: 950 - total flux cleaned = -0.0010163 Jy ! Component: 1000 - total flux cleaned = -0.00101525 Jy ! Component: 1050 - total flux cleaned = -0.000895836 Jy ! Component: 1100 - total flux cleaned = -0.000896148 Jy ! Component: 1150 - total flux cleaned = -0.000782536 Jy ! Component: 1200 - total flux cleaned = -0.000894257 Jy ! Component: 1250 - total flux cleaned = -0.000948159 Jy ! Component: 1300 - total flux cleaned = -0.00078448 Jy ! Component: 1350 - total flux cleaned = -0.000784342 Jy ! Component: 1400 - total flux cleaned = -0.000731383 Jy ! Component: 1450 - total flux cleaned = -0.000629272 Jy ! Component: 1500 - total flux cleaned = -0.00052813 Jy ! Component: 1550 - total flux cleaned = -0.000379652 Jy ! Component: 1600 - total flux cleaned = -0.000477971 Jy ! Component: 1650 - total flux cleaned = -0.000285098 Jy ! Component: 1700 - total flux cleaned = -0.000380584 Jy ! Component: 1750 - total flux cleaned = -0.000192453 Jy ! Component: 1800 - total flux cleaned = -0.000101034 Jy ! Component: 1850 - total flux cleaned = -0.000146127 Jy ! Component: 1900 - total flux cleaned = -0.000100319 Jy ! Component: 1950 - total flux cleaned = -9.96421e-05 Jy ! Component: 2000 - total flux cleaned = -9.95278e-05 Jy ! Component: 2050 - total flux cleaned = -0.000141961 Jy ! Component: 2100 - total flux cleaned = -5.6051e-05 Jy ! Component: 2150 - total flux cleaned = -9.8162e-05 Jy ! Component: 2200 - total flux cleaned = 2.68279e-05 Jy ! Component: 2250 - total flux cleaned = -5.51061e-05 Jy ! Component: 2300 - total flux cleaned = 6.68793e-05 Jy ! Component: 2350 - total flux cleaned = 6.70277e-05 Jy ! Component: 2400 - total flux cleaned = 6.70991e-05 Jy ! Component: 2450 - total flux cleaned = 0.000184612 Jy ! Component: 2500 - total flux cleaned = 2.92954e-05 Jy ! Component: 2550 - total flux cleaned = 0.000183905 Jy ! Component: 2600 - total flux cleaned = 0.00014606 Jy ! Component: 2650 - total flux cleaned = 0.000222299 Jy ! Component: 2700 - total flux cleaned = 0.000334745 Jy ! Component: 2750 - total flux cleaned = 0.000260817 Jy ! Component: 2800 - total flux cleaned = 0.000371076 Jy ! Component: 2850 - total flux cleaned = 0.000480522 Jy ! Component: 2900 - total flux cleaned = 0.000480221 Jy ! Component: 2950 - total flux cleaned = 0.000551972 Jy ! Component: 3000 - total flux cleaned = 0.000623062 Jy ! Component: 3050 - total flux cleaned = 0.000728879 Jy ! Component: 3100 - total flux cleaned = 0.00069409 Jy ! Component: 3150 - total flux cleaned = 0.000728862 Jy ! Component: 3200 - total flux cleaned = 0.000831915 Jy ! Component: 3250 - total flux cleaned = 0.000831699 Jy ! Component: 3300 - total flux cleaned = 0.000730363 Jy ! Component: 3350 - total flux cleaned = 0.00083163 Jy ! Component: 3400 - total flux cleaned = 0.000831633 Jy ! Component: 3450 - total flux cleaned = 0.000897804 Jy ! Component: 3500 - total flux cleaned = 0.000864312 Jy ! Component: 3550 - total flux cleaned = 0.000831559 Jy ! Component: 3600 - total flux cleaned = 0.000766332 Jy ! Component: 3650 - total flux cleaned = 0.000798669 Jy ! Component: 3700 - total flux cleaned = 0.000766433 Jy ! Component: 3750 - total flux cleaned = 0.000798659 Jy ! Component: 3800 - total flux cleaned = 0.000798666 Jy ! Component: 3850 - total flux cleaned = 0.00073507 Jy ! Component: 3900 - total flux cleaned = 0.000671806 Jy ! Component: 3950 - total flux cleaned = 0.000640238 Jy ! Component: 4000 - total flux cleaned = 0.000608898 Jy ! Component: 4050 - total flux cleaned = 0.00057778 Jy ! Total flux subtracted in 4096 components = 0.000546672 Jy ! Clean residual min=-0.001720 max=0.001922 Jy/beam ! Clean residual mean=-0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 1.00954 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 489 components and 1.00954 Jy ![Exited script file: muppet] wmap "J0739+0137_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 7.409 at -6.489 degrees (North through East) ! Clean map min=-0.0064975 max=0.67533 Jy/beam ! Writing clean map to FITS file: J0739+0137_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.675328 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000534499 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.237439 0.237439 0.474879 0.949758 1.89952 3.79903 7.59806 15.1961 30.3923 60.7845 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.675 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 7.409 at -6.489 degrees (North through East) ! Clean map min=-0.0064975 max=0.67533 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0739+0137_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:09:49 2017