! Started logfile: J0735+0130_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:09:38 2017 obs J0735+0130_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0735+0130_S_2015_01_23_pus_uva.fits ! AN table 1: 105 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.874921 visibilities/baseline/integration-bin. ! Found source: J0735+0130 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 16536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0735+0130_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986823Jy sigma=0.011372 ! Fit after self-cal, rms=0.957418Jy sigma=0.011087 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=6.616 mas, bpa=-4.91 degrees ! Estimated noise=667.471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339486 Jy ! Component: 100 - total flux cleaned = 0.0422039 Jy ! Total flux subtracted in 100 components = 0.0422039 Jy ! Clean residual min=-0.002820 max=0.003396 Jy/beam ! Clean residual mean=0.000002 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0422039 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0422039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087344Jy sigma=0.000777 ! Fit after self-cal, rms=0.086798Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.286 mas, bpa=-3.902 degrees ! Estimated noise=509.537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536629 Jy ! Component: 100 - total flux cleaned = 0.00783117 Jy ! Component: 150 - total flux cleaned = 0.00907925 Jy ! Component: 200 - total flux cleaned = 0.00946024 Jy ! Total flux subtracted in 200 components = 0.00946024 Jy ! Clean residual min=-0.002233 max=0.002444 Jy/beam ! Clean residual mean=0.000013 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0516641 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.0516641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086388Jy sigma=0.000767 ! Fit after self-cal, rms=0.086325Jy sigma=0.000767 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 0.95 KP 1.05 ! LA 1.06 MK 1.02 NL 1.10 OV 1.01 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.03 KP 1.04 ! LA 1.09 MK 1.00 NL 1.15 OV 0.95 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.03 KP 0.95 ! LA 0.91 MK 1.02 NL 1.24 OV 0.97 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.56 HN 0.98 KP 0.83 ! LA 0.94 MK 1.07 NL 0.95 OV 0.97 ! PT 0.98 SC 0.96 ! ! ! Fit before self-cal, rms=0.086325Jy sigma=0.000767 ! Fit after self-cal, rms=0.073827Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=7.3 mas, bpa=-3.421 degrees ! Estimated noise=507.999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378405 Jy ! Component: 100 - total flux cleaned = 0.000377118 Jy ! Component: 150 - total flux cleaned = 0.000393181 Jy ! Component: 200 - total flux cleaned = 0.000379534 Jy ! Total flux subtracted in 200 components = 0.000379534 Jy ! Clean residual min=-0.002044 max=0.002027 Jy/beam ! Clean residual mean=0.000013 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0520437 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0520437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073814Jy sigma=0.000764 ! Fit after self-cal, rms=0.073684Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073684Jy sigma=0.000764 ! Fit after self-cal, rms=0.073264Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=7.291 mas, bpa=-3.222 degrees ! Estimated noise=505.927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353243 Jy ! Component: 100 - total flux cleaned = 0.000282218 Jy ! Component: 150 - total flux cleaned = 0.000282405 Jy ! Component: 200 - total flux cleaned = 0.000320776 Jy ! Total flux subtracted in 200 components = 0.000320776 Jy ! Clean residual min=-0.001714 max=0.002165 Jy/beam ! Clean residual mean=0.000005 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0523644 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0523644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073257Jy sigma=0.000762 ! Fit after self-cal, rms=0.073265Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187458 Jy ! Component: 100 - total flux cleaned = 0.00276968 Jy ! Component: 150 - total flux cleaned = 0.00334467 Jy ! Component: 200 - total flux cleaned = 0.00359806 Jy ! Total flux subtracted in 200 components = 0.00359806 Jy ! Clean residual min=-0.001438 max=0.001684 Jy/beam ! Clean residual mean=0.000004 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0559625 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.0559625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073211Jy sigma=0.000761 ! Fit after self-cal, rms=0.073186Jy sigma=0.000761 ! Inverting map ! Added new window around map position (-33.5, 91). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150881 Jy ! Component: 100 - total flux cleaned = 0.00228009 Jy ! Component: 150 - total flux cleaned = 0.00255815 Jy ! Component: 200 - total flux cleaned = 0.00279621 Jy ! Total flux subtracted in 200 components = 0.00279621 Jy ! Clean residual min=-0.001456 max=0.001492 Jy/beam ! Clean residual mean=0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0587587 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 0.0587587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073142Jy sigma=0.000760 ! Fit after self-cal, rms=0.073122Jy sigma=0.000760 ! Inverting map ! Added new window around map position (18.5, 64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119619 Jy ! Component: 100 - total flux cleaned = 0.00141803 Jy ! Component: 150 - total flux cleaned = 0.00163492 Jy ! Component: 200 - total flux cleaned = 0.00185064 Jy ! Total flux subtracted in 200 components = 0.00185064 Jy ! Clean residual min=-0.001485 max=0.001199 Jy/beam ! Clean residual mean=0.000003 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0606094 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.0606094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073081Jy sigma=0.000760 ! Fit after self-cal, rms=0.073059Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073059Jy sigma=0.000760 ! Fit after self-cal, rms=0.072318Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.276 mas, bpa=-3.316 degrees ! Estimated noise=502.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918927 Jy ! Component: 100 - total flux cleaned = 0.00108554 Jy ! Component: 150 - total flux cleaned = 0.00113468 Jy ! Component: 200 - total flux cleaned = 0.00117884 Jy ! Total flux subtracted in 200 components = 0.00117884 Jy ! Clean residual min=-0.001345 max=0.001200 Jy/beam ! Clean residual mean=0.000002 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.0617882 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.0617882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072295Jy sigma=0.000759 ! Fit after self-cal, rms=0.072278Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000452428 Jy ! Component: 100 - total flux cleaned = 0.000520331 Jy ! Component: 150 - total flux cleaned = 0.000560909 Jy ! Component: 200 - total flux cleaned = 0.000542295 Jy ! Total flux subtracted in 200 components = 0.000542295 Jy ! Clean residual min=-0.001334 max=0.001166 Jy/beam ! Clean residual mean=0.000003 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0623305 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 114 components and 0.0623305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072264Jy sigma=0.000759 ! Fit after self-cal, rms=0.072255Jy sigma=0.000759 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072255Jy sigma=0.000759 ! Fit after self-cal, rms=0.072019Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.21 mas, bmaj=11.48 mas, bpa=-2.008 degrees ! Estimated noise=640.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556362 Jy ! Component: 100 - total flux cleaned = 0.000814532 Jy ! Component: 150 - total flux cleaned = 0.00088592 Jy ! Component: 200 - total flux cleaned = 0.000901821 Jy ! Total flux subtracted in 200 components = 0.000901821 Jy ! Clean residual min=-0.001325 max=0.001309 Jy/beam ! Clean residual mean=0.000006 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0632323 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 141 components and 0.0632323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072013Jy sigma=0.000759 ! Fit after self-cal, rms=0.072006Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257468 Jy ! Component: 100 - total flux cleaned = 0.000335827 Jy ! Component: 150 - total flux cleaned = 0.000348147 Jy ! Component: 200 - total flux cleaned = 0.000335538 Jy ! Total flux subtracted in 200 components = 0.000335538 Jy ! Clean residual min=-0.001331 max=0.001343 Jy/beam ! Clean residual mean=0.000006 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0635679 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 149 components and 0.0635679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072003Jy sigma=0.000759 ! Fit after self-cal, rms=0.072001Jy sigma=0.000759 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=7.272 mas, bpa=-3.401 degrees ! Estimated noise=501.664 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 7.272 at -3.401 degrees (North through East) ! Clean map min=-0.0012834 max=0.04538 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=6.608 mas, bpa=-4.288 degrees ! Estimated noise=654.785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033592 Jy ! Component: 100 - total flux cleaned = 0.0428995 Jy ! Component: 150 - total flux cleaned = 0.0476102 Jy ! Component: 200 - total flux cleaned = 0.0509277 Jy ! Total flux subtracted in 200 components = 0.0509277 Jy ! Clean residual min=-0.002386 max=0.002370 Jy/beam ! Clean residual mean=0.000001 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0509277 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0509277 Jy ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=7.272 mas, bpa=-3.401 degrees ! Estimated noise=501.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309224 Jy ! Component: 100 - total flux cleaned = 0.00528898 Jy ! Component: 150 - total flux cleaned = 0.00709155 Jy ! Component: 200 - total flux cleaned = 0.00825635 Jy ! Total flux subtracted in 200 components = 0.00825635 Jy ! Clean residual min=-0.001577 max=0.001491 Jy/beam ! Clean residual mean=0.000003 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.059184 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.059184 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.21 mas, bmaj=11.48 mas, bpa=-2.008 degrees ! Estimated noise=640.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145856 Jy ! Component: 100 - total flux cleaned = 0.00225071 Jy ! Component: 150 - total flux cleaned = 0.00275384 Jy ! Component: 200 - total flux cleaned = 0.00303943 Jy ! Total flux subtracted in 200 components = 0.00303943 Jy ! Clean residual min=-0.001586 max=0.001365 Jy/beam ! Clean residual mean=0.000006 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0622235 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278705 Jy ! Component: 100 - total flux cleaned = 0.000496291 Jy ! Component: 150 - total flux cleaned = 0.000617782 Jy ! Component: 200 - total flux cleaned = 0.000728833 Jy ! Total flux subtracted in 200 components = 0.000728833 Jy ! Clean residual min=-0.001503 max=0.001282 Jy/beam ! Clean residual mean=0.000006 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0629523 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 100 components and 0.0629523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=7.272 mas, bpa=-3.401 degrees ! Estimated noise=501.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109369 Jy ! Component: 100 - total flux cleaned = 0.000276408 Jy ! Component: 150 - total flux cleaned = 0.000424433 Jy ! Component: 200 - total flux cleaned = 0.000478232 Jy ! Total flux subtracted in 200 components = 0.000478232 Jy ! Clean residual min=-0.001402 max=0.001272 Jy/beam ! Clean residual mean=0.000003 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.0634305 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.0634305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072022Jy sigma=0.000759 ! Fit after self-cal, rms=0.072019Jy sigma=0.000759 wmodel J0735+0130_S_2015_01_23_pus_map.mod ! Writing 120 model components to file: J0735+0130_S_2015_01_23_pus_map.mod wobs J0735+0130_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0735+0130_S_2015_01_23_pus_uvs.fits wwins J0735+0130_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0735+0130_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268865 Jy ! Component: 100 - total flux cleaned = -0.000379827 Jy ! Component: 150 - total flux cleaned = -0.000380061 Jy ! Component: 200 - total flux cleaned = -0.00036003 Jy ! Component: 250 - total flux cleaned = -0.000223172 Jy ! Component: 300 - total flux cleaned = -0.000146984 Jy ! Component: 350 - total flux cleaned = -1.67927e-05 Jy ! Component: 400 - total flux cleaned = 1.26119e-06 Jy ! Component: 450 - total flux cleaned = 5.45371e-05 Jy ! Component: 500 - total flux cleaned = 5.39132e-05 Jy ! Component: 550 - total flux cleaned = 1.96979e-05 Jy ! Component: 600 - total flux cleaned = 3.19837e-06 Jy ! Component: 650 - total flux cleaned = -2.93571e-05 Jy ! Component: 700 - total flux cleaned = -4.51233e-05 Jy ! Component: 750 - total flux cleaned = -0.000108079 Jy ! Component: 800 - total flux cleaned = -0.000139116 Jy ! Component: 850 - total flux cleaned = -0.000200137 Jy ! Component: 900 - total flux cleaned = -0.000230254 Jy ! Component: 950 - total flux cleaned = -0.000304608 Jy ! Component: 1000 - total flux cleaned = -0.000348477 Jy ! Component: 1050 - total flux cleaned = -0.000377424 Jy ! Component: 1100 - total flux cleaned = -0.000406247 Jy ! Component: 1150 - total flux cleaned = -0.000462843 Jy ! Component: 1200 - total flux cleaned = -0.000462611 Jy ! Component: 1250 - total flux cleaned = -0.000476183 Jy ! Component: 1300 - total flux cleaned = -0.000421722 Jy ! Component: 1350 - total flux cleaned = -0.00038153 Jy ! Component: 1400 - total flux cleaned = -0.000355297 Jy ! Component: 1450 - total flux cleaned = -0.00034227 Jy ! Component: 1500 - total flux cleaned = -0.000290406 Jy ! Component: 1550 - total flux cleaned = -0.000264747 Jy ! Component: 1600 - total flux cleaned = -0.000201084 Jy ! Component: 1650 - total flux cleaned = -0.000188398 Jy ! Component: 1700 - total flux cleaned = -0.000113809 Jy ! Component: 1750 - total flux cleaned = -0.000101335 Jy ! Component: 1800 - total flux cleaned = -5.22867e-05 Jy ! Component: 1850 - total flux cleaned = -2.81561e-05 Jy ! Component: 1900 - total flux cleaned = 3.1855e-05 Jy ! Component: 1950 - total flux cleaned = 7.93641e-05 Jy ! Component: 2000 - total flux cleaned = 0.000103077 Jy ! Component: 2050 - total flux cleaned = 0.000172955 Jy ! Component: 2100 - total flux cleaned = 0.000219049 Jy ! Component: 2150 - total flux cleaned = 0.000219035 Jy ! Component: 2200 - total flux cleaned = 0.000230386 Jy ! Component: 2250 - total flux cleaned = 0.000208058 Jy ! Component: 2300 - total flux cleaned = 0.000230519 Jy ! Component: 2350 - total flux cleaned = 0.000285665 Jy ! Component: 2400 - total flux cleaned = 0.000285873 Jy ! Component: 2450 - total flux cleaned = 0.000340102 Jy ! Component: 2500 - total flux cleaned = 0.000361635 Jy ! Component: 2550 - total flux cleaned = 0.000382943 Jy ! Component: 2600 - total flux cleaned = 0.000414676 Jy ! Component: 2650 - total flux cleaned = 0.000456532 Jy ! Component: 2700 - total flux cleaned = 0.000487568 Jy ! Component: 2750 - total flux cleaned = 0.00051845 Jy ! Component: 2800 - total flux cleaned = 0.000549277 Jy ! Component: 2850 - total flux cleaned = 0.000589799 Jy ! Component: 2900 - total flux cleaned = 0.000690382 Jy ! Component: 2950 - total flux cleaned = 0.000710396 Jy ! Component: 3000 - total flux cleaned = 0.000730203 Jy ! Component: 3050 - total flux cleaned = 0.000789298 Jy ! Component: 3100 - total flux cleaned = 0.000818537 Jy ! Component: 3150 - total flux cleaned = 0.000857406 Jy ! Component: 3200 - total flux cleaned = 0.000915191 Jy ! Component: 3250 - total flux cleaned = 0.000953312 Jy ! Component: 3300 - total flux cleaned = 0.000934323 Jy ! Component: 3350 - total flux cleaned = 0.000972025 Jy ! Component: 3400 - total flux cleaned = 0.000972075 Jy ! Component: 3450 - total flux cleaned = 0.00104644 Jy ! Component: 3500 - total flux cleaned = 0.00105566 Jy ! Component: 3550 - total flux cleaned = 0.00104646 Jy ! Component: 3600 - total flux cleaned = 0.00109196 Jy ! Component: 3650 - total flux cleaned = 0.00111914 Jy ! Component: 3700 - total flux cleaned = 0.00113712 Jy ! Component: 3750 - total flux cleaned = 0.00114593 Jy ! Component: 3800 - total flux cleaned = 0.0011637 Jy ! Component: 3850 - total flux cleaned = 0.00117249 Jy ! Component: 3900 - total flux cleaned = 0.00121634 Jy ! Component: 3950 - total flux cleaned = 0.00120752 Jy ! Component: 4000 - total flux cleaned = 0.00121617 Jy ! Component: 4050 - total flux cleaned = 0.00124206 Jy ! Total flux subtracted in 4096 components = 0.00127636 Jy ! Clean residual min=-0.000463 max=0.000649 Jy/beam ! Clean residual mean=-0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.0647069 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 422 components and 0.0647068 Jy ![Exited script file: muppet] wmap "J0735+0130_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 7.272 at -3.401 degrees (North through East) ! Clean map min=-0.0010445 max=0.045108 Jy/beam ! Writing clean map to FITS file: J0735+0130_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0451079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000157426 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04699 1.04699 2.09399 4.18798 8.37595 16.7519 33.5038 67.0076 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 7.272 at -3.401 degrees (North through East) ! Clean map min=-0.0010445 max=0.045108 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0735+0130_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:09:44 2017