! Started logfile: J0733+0456_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:09:33 2017 obs J0733+0456_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0733+0456_S_2015_01_23_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968081 visibilities/baseline/integration-bin. ! Found source: J0733+0456 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 9584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0733+0456_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.236583Jy sigma=0.009475 ! Fit after self-cal, rms=1.195659Jy sigma=0.009270 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=6.682 mas, bpa=-4.595 degrees ! Estimated noise=907.119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147326 Jy ! Component: 100 - total flux cleaned = 0.184002 Jy ! Total flux subtracted in 100 components = 0.184002 Jy ! Clean residual min=-0.013248 max=0.021115 Jy/beam ! Clean residual mean=-0.000009 rms=0.004369 Jy/beam ! Combined flux in latest and established models = 0.184002 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.184002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979184Jy sigma=0.001169 ! Fit after self-cal, rms=0.979182Jy sigma=0.001169 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=7.408 mas, bpa=-3.64 degrees ! Estimated noise=685.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225809 Jy ! Component: 100 - total flux cleaned = 0.032533 Jy ! Component: 150 - total flux cleaned = 0.0374683 Jy ! Component: 200 - total flux cleaned = 0.0405832 Jy ! Total flux subtracted in 200 components = 0.0405832 Jy ! Clean residual min=-0.012599 max=0.022376 Jy/beam ! Clean residual mean=-0.000044 rms=0.004823 Jy/beam ! Combined flux in latest and established models = 0.224585 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.224585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.975545Jy sigma=0.001148 ! Fit after self-cal, rms=0.975545Jy sigma=0.001147 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 9.58 HN 0.92 KP 1.06 ! LA 0.99 MK 1.05 NL 0.95 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 8.29 HN 1.01 KP 0.96 ! LA 0.97 MK 1.03 NL 1.01 OV 0.96 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 8.03 HN 0.96 KP 0.83 ! LA 0.78 MK 1.05 NL 1.20 OV 0.86 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.46 HN 0.93 KP 0.75 ! LA 0.80 MK 1.00 NL 0.96 OV 0.93 ! PT 0.95 SC 0.98 ! ! ! Fit before self-cal, rms=0.975545Jy sigma=0.001147 ! Fit after self-cal, rms=8.848781Jy sigma=0.000796 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=7.381 mas, bpa=-3.604 degrees ! Estimated noise=692.146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344111 Jy ! Component: 100 - total flux cleaned = 0.00494041 Jy ! Component: 150 - total flux cleaned = 0.00517484 Jy ! Component: 200 - total flux cleaned = 0.00533723 Jy ! Total flux subtracted in 200 components = 0.00533723 Jy ! Clean residual min=-0.005172 max=0.003762 Jy/beam ! Clean residual mean=0.000023 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.229922 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.229922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.848320Jy sigma=0.000797 ! Fit after self-cal, rms=8.848383Jy sigma=0.000794 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.848383Jy sigma=0.000794 ! Fit after self-cal, rms=0.204219Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=7.381 mas, bpa=-3.535 degrees ! Estimated noise=691.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388818 Jy ! Component: 100 - total flux cleaned = 0.000442853 Jy ! Component: 150 - total flux cleaned = 0.000501642 Jy ! Component: 200 - total flux cleaned = 0.000552867 Jy ! Total flux subtracted in 200 components = 0.000552867 Jy ! Clean residual min=-0.002139 max=0.001923 Jy/beam ! Clean residual mean=0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.230475 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.230475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204201Jy sigma=0.000775 ! Fit after self-cal, rms=0.204122Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.55485e-05 Jy ! Component: 100 - total flux cleaned = 0.000113259 Jy ! Component: 150 - total flux cleaned = 0.000144143 Jy ! Component: 200 - total flux cleaned = 0.000170566 Jy ! Total flux subtracted in 200 components = 0.000170566 Jy ! Clean residual min=-0.002139 max=0.001930 Jy/beam ! Clean residual mean=0.000000 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.230646 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.230646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204110Jy sigma=0.000775 ! Fit after self-cal, rms=0.204111Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204111Jy sigma=0.000775 ! Fit after self-cal, rms=0.203883Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=7.376 mas, bpa=-3.509 degrees ! Estimated noise=691.107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358666 Jy ! Component: 100 - total flux cleaned = 0.000458123 Jy ! Component: 150 - total flux cleaned = 0.000528167 Jy ! Component: 200 - total flux cleaned = 0.000577634 Jy ! Total flux subtracted in 200 components = 0.000577634 Jy ! Clean residual min=-0.002133 max=0.001924 Jy/beam ! Clean residual mean=0.000000 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.231223 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.231223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203873Jy sigma=0.000775 ! Fit after self-cal, rms=0.203872Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.01611e-05 Jy ! Component: 100 - total flux cleaned = 6.98804e-05 Jy ! Component: 150 - total flux cleaned = 9.22005e-05 Jy ! Component: 200 - total flux cleaned = 0.000103298 Jy ! Total flux subtracted in 200 components = 0.000103298 Jy ! Clean residual min=-0.002139 max=0.001929 Jy/beam ! Clean residual mean=0.000000 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.231326 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.231326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203866Jy sigma=0.000775 ! Fit after self-cal, rms=0.203865Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203865Jy sigma=0.000775 ! Fit after self-cal, rms=0.203851Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.272 mas, bmaj=11.4 mas, bpa=-3.097 degrees ! Estimated noise=896.168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100196 Jy ! Component: 100 - total flux cleaned = 0.00131864 Jy ! Component: 150 - total flux cleaned = 0.00138493 Jy ! Component: 200 - total flux cleaned = 0.00142891 Jy ! Total flux subtracted in 200 components = 0.00142891 Jy ! Clean residual min=-0.002238 max=0.002224 Jy/beam ! Clean residual mean=0.000003 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.232755 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.232755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203838Jy sigma=0.000775 ! Fit after self-cal, rms=0.203837Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013202 Jy ! Component: 100 - total flux cleaned = 0.000145784 Jy ! Component: 150 - total flux cleaned = 0.000157959 Jy ! Component: 200 - total flux cleaned = 0.000178294 Jy ! Total flux subtracted in 200 components = 0.000178294 Jy ! Clean residual min=-0.002247 max=0.002240 Jy/beam ! Clean residual mean=0.000003 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.232934 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.232934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203831Jy sigma=0.000775 ! Fit after self-cal, rms=0.203831Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=7.372 mas, bpa=-3.489 degrees ! Estimated noise=691.123 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.315 x 7.372 at -3.489 degrees (North through East) ! Clean map min=-0.0020622 max=0.19605 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=6.598 mas, bpa=-4.412 degrees ! Estimated noise=915.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148438 Jy ! Component: 100 - total flux cleaned = 0.188144 Jy ! Component: 150 - total flux cleaned = 0.207134 Jy ! Component: 200 - total flux cleaned = 0.216992 Jy ! Total flux subtracted in 200 components = 0.216992 Jy ! Clean residual min=-0.002686 max=0.004639 Jy/beam ! Clean residual mean=-0.000005 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.216992 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.216992 Jy ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=7.372 mas, bpa=-3.489 degrees ! Estimated noise=691.123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647458 Jy ! Component: 100 - total flux cleaned = 0.00977936 Jy ! Component: 150 - total flux cleaned = 0.0117302 Jy ! Component: 200 - total flux cleaned = 0.0129492 Jy ! Total flux subtracted in 200 components = 0.0129492 Jy ! Clean residual min=-0.002218 max=0.001899 Jy/beam ! Clean residual mean=-0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.229941 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.229941 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.272 mas, bmaj=11.4 mas, bpa=-3.097 degrees ! Estimated noise=896.168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158941 Jy ! Component: 100 - total flux cleaned = 0.00227387 Jy ! Component: 150 - total flux cleaned = 0.00259252 Jy ! Component: 200 - total flux cleaned = 0.00263494 Jy ! Total flux subtracted in 200 components = 0.00263494 Jy ! Clean residual min=-0.002240 max=0.002222 Jy/beam ! Clean residual mean=0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.232576 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.91031e-05 Jy ! Component: 100 - total flux cleaned = 7.53533e-05 Jy ! Component: 150 - total flux cleaned = 0.000102493 Jy ! Component: 200 - total flux cleaned = 0.000134174 Jy ! Total flux subtracted in 200 components = 0.000134174 Jy ! Clean residual min=-0.002244 max=0.002237 Jy/beam ! Clean residual mean=0.000003 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.23271 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.23271 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=7.372 mas, bpa=-3.489 degrees ! Estimated noise=691.123 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00072288 Jy ! Component: 100 - total flux cleaned = -0.000743166 Jy ! Component: 150 - total flux cleaned = -0.000780404 Jy ! Component: 200 - total flux cleaned = -0.000813395 Jy ! Total flux subtracted in 200 components = -0.000813395 Jy ! Clean residual min=-0.002158 max=0.001968 Jy/beam ! Clean residual mean=0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.231897 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.231897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203831Jy sigma=0.000775 ! Fit after self-cal, rms=0.203826Jy sigma=0.000775 wmodel J0733+0456_S_2015_01_23_pus_map.mod ! Writing 57 model components to file: J0733+0456_S_2015_01_23_pus_map.mod wobs J0733+0456_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0733+0456_S_2015_01_23_pus_uvs.fits wwins J0733+0456_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0733+0456_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165129 Jy ! Component: 100 - total flux cleaned = -0.000132409 Jy ! Component: 150 - total flux cleaned = 0.000122927 Jy ! Component: 200 - total flux cleaned = 0.000337735 Jy ! Component: 250 - total flux cleaned = 0.000545773 Jy ! Component: 300 - total flux cleaned = 0.000662115 Jy ! Component: 350 - total flux cleaned = 0.000833138 Jy ! Component: 400 - total flux cleaned = 0.00105559 Jy ! Component: 450 - total flux cleaned = 0.00116429 Jy ! Component: 500 - total flux cleaned = 0.00127084 Jy ! Component: 550 - total flux cleaned = 0.00132284 Jy ! Component: 600 - total flux cleaned = 0.00134844 Jy ! Component: 650 - total flux cleaned = 0.00144915 Jy ! Component: 700 - total flux cleaned = 0.00149877 Jy ! Component: 750 - total flux cleaned = 0.0016208 Jy ! Component: 800 - total flux cleaned = 0.00164437 Jy ! Component: 850 - total flux cleaned = 0.00164427 Jy ! Component: 900 - total flux cleaned = 0.0016675 Jy ! Component: 950 - total flux cleaned = 0.001598 Jy ! Component: 1000 - total flux cleaned = 0.0016445 Jy ! Component: 1050 - total flux cleaned = 0.00173547 Jy ! Component: 1100 - total flux cleaned = 0.0017584 Jy ! Component: 1150 - total flux cleaned = 0.00186963 Jy ! Component: 1200 - total flux cleaned = 0.00189195 Jy ! Component: 1250 - total flux cleaned = 0.00193549 Jy ! Component: 1300 - total flux cleaned = 0.00197866 Jy ! Component: 1350 - total flux cleaned = 0.00206386 Jy ! Component: 1400 - total flux cleaned = 0.00214821 Jy ! Component: 1450 - total flux cleaned = 0.00223152 Jy ! Component: 1500 - total flux cleaned = 0.00216904 Jy ! Component: 1550 - total flux cleaned = 0.00227166 Jy ! Component: 1600 - total flux cleaned = 0.00229161 Jy ! Component: 1650 - total flux cleaned = 0.00235205 Jy ! Component: 1700 - total flux cleaned = 0.00229236 Jy ! Component: 1750 - total flux cleaned = 0.00241112 Jy ! Component: 1800 - total flux cleaned = 0.00245013 Jy ! Component: 1850 - total flux cleaned = 0.00254775 Jy ! Component: 1900 - total flux cleaned = 0.00256697 Jy ! Component: 1950 - total flux cleaned = 0.00258619 Jy ! Component: 2000 - total flux cleaned = 0.00270051 Jy ! Component: 2050 - total flux cleaned = 0.0027382 Jy ! Component: 2100 - total flux cleaned = 0.00286935 Jy ! Component: 2150 - total flux cleaned = 0.00290633 Jy ! Component: 2200 - total flux cleaned = 0.00298016 Jy ! Component: 2250 - total flux cleaned = 0.00298005 Jy ! Component: 2300 - total flux cleaned = 0.00308935 Jy ! Component: 2350 - total flux cleaned = 0.00310733 Jy ! Component: 2400 - total flux cleaned = 0.00319715 Jy ! Component: 2450 - total flux cleaned = 0.00325073 Jy ! Component: 2500 - total flux cleaned = 0.00335704 Jy ! Component: 2550 - total flux cleaned = 0.0033395 Jy ! Component: 2600 - total flux cleaned = 0.00339212 Jy ! Component: 2650 - total flux cleaned = 0.00344419 Jy ! Component: 2700 - total flux cleaned = 0.00349611 Jy ! Component: 2750 - total flux cleaned = 0.00353048 Jy ! Component: 2800 - total flux cleaned = 0.00359873 Jy ! Component: 2850 - total flux cleaned = 0.00358169 Jy ! Component: 2900 - total flux cleaned = 0.00363235 Jy ! Component: 2950 - total flux cleaned = 0.00368268 Jy ! Component: 3000 - total flux cleaned = 0.00373285 Jy ! Component: 3050 - total flux cleaned = 0.00374937 Jy ! Component: 3100 - total flux cleaned = 0.00376581 Jy ! Component: 3150 - total flux cleaned = 0.00383158 Jy ! Component: 3200 - total flux cleaned = 0.00384789 Jy ! Component: 3250 - total flux cleaned = 0.00386418 Jy ! Component: 3300 - total flux cleaned = 0.00394503 Jy ! Component: 3350 - total flux cleaned = 0.0040095 Jy ! Component: 3400 - total flux cleaned = 0.00410555 Jy ! Component: 3450 - total flux cleaned = 0.00412149 Jy ! Component: 3500 - total flux cleaned = 0.00416881 Jy ! Component: 3550 - total flux cleaned = 0.00423182 Jy ! Component: 3600 - total flux cleaned = 0.00429457 Jy ! Component: 3650 - total flux cleaned = 0.00438807 Jy ! Component: 3700 - total flux cleaned = 0.0044502 Jy ! Component: 3750 - total flux cleaned = 0.0044656 Jy ! Component: 3800 - total flux cleaned = 0.00457331 Jy ! Component: 3850 - total flux cleaned = 0.00464993 Jy ! Component: 3900 - total flux cleaned = 0.00466507 Jy ! Component: 3950 - total flux cleaned = 0.00472571 Jy ! Component: 4000 - total flux cleaned = 0.00478599 Jy ! Component: 4050 - total flux cleaned = 0.00481608 Jy ! Total flux subtracted in 4096 components = 0.00489092 Jy ! Clean residual min=-0.000787 max=0.000860 Jy/beam ! Clean residual mean=-0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.236787 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 342 components and 0.236787 Jy ![Exited script file: muppet] wmap "J0733+0456_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.315 x 7.372 at -3.489 degrees (North through East) ! Clean map min=-0.0018532 max=0.19602 Jy/beam ! Writing clean map to FITS file: J0733+0456_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.196023 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283076 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.433228 0.433228 0.866456 1.73291 3.46582 6.93165 13.8633 27.7266 55.4532 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.196 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.315 x 7.372 at -3.489 degrees (North through East) ! Clean map min=-0.0018532 max=0.19602 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0733+0456_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:09:38 2017