! Started logfile: J0730-3208_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:20:16 2017 obs J0730-3208_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0730-3208_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0730-3208 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0730-3208_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.820908Jy sigma=0.008977 ! Fit after self-cal, rms=0.782053Jy sigma=0.008439 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.334 mas, bmaj=5.562 mas, bpa=-3.057 degrees ! Estimated noise=1283.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159626 Jy ! Component: 100 - total flux cleaned = 0.227133 Jy ! Total flux subtracted in 100 components = 0.227133 Jy ! Clean residual min=-0.017013 max=0.035394 Jy/beam ! Clean residual mean=-0.000587 rms=0.006418 Jy/beam ! Combined flux in latest and established models = 0.227133 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.227133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151540Jy sigma=0.001419 ! Fit after self-cal, rms=0.151404Jy sigma=0.001417 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.866 mas, bmaj=6.947 mas, bpa=-3.351 degrees ! Estimated noise=722.683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0654815 Jy ! Component: 100 - total flux cleaned = 0.0977175 Jy ! Component: 150 - total flux cleaned = 0.114229 Jy ! Component: 200 - total flux cleaned = 0.122927 Jy ! Total flux subtracted in 200 components = 0.122927 Jy ! Clean residual min=-0.012343 max=0.017547 Jy/beam ! Clean residual mean=-0.000368 rms=0.004399 Jy/beam ! Combined flux in latest and established models = 0.35006 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 55 components and 0.35006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118585Jy sigma=0.001132 ! Fit after self-cal, rms=0.118523Jy sigma=0.001131 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.96 ! MK 1.12 NL 1.04 OV 0.93 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.00* KP 1.00* LA 0.94 ! MK 1.23 NL 1.11 OV 0.93 PT 0.93 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.77 ! MK 1.06 NL 1.05 OV 0.88 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.00* KP 1.00* LA 0.83 ! MK 0.98 NL 1.14 OV 0.94 PT 0.93 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.118523Jy sigma=0.001131 ! Fit after self-cal, rms=0.108795Jy sigma=0.000984 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.085 mas, bpa=-2.587 degrees ! Estimated noise=742.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420829 Jy ! Component: 100 - total flux cleaned = 0.0048213 Jy ! Component: 150 - total flux cleaned = 0.00503245 Jy ! Component: 200 - total flux cleaned = 0.00522726 Jy ! Total flux subtracted in 200 components = 0.00522726 Jy ! Clean residual min=-0.007135 max=0.006920 Jy/beam ! Clean residual mean=-0.000001 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 0.355287 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.355287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108455Jy sigma=0.000984 ! Fit after self-cal, rms=0.108052Jy sigma=0.000982 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108052Jy sigma=0.000982 ! Fit after self-cal, rms=0.109081Jy sigma=0.000964 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=7.076 mas, bpa=-2.316 degrees ! Estimated noise=757.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469767 Jy ! Component: 100 - total flux cleaned = 0.00600226 Jy ! Component: 150 - total flux cleaned = 0.00626867 Jy ! Component: 200 - total flux cleaned = 0.00645459 Jy ! Total flux subtracted in 200 components = 0.00645459 Jy ! Clean residual min=-0.005768 max=0.005903 Jy/beam ! Clean residual mean=0.000008 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.361741 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.361741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108711Jy sigma=0.000963 ! Fit after self-cal, rms=0.108660Jy sigma=0.000963 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573628 Jy ! Component: 100 - total flux cleaned = 0.00546384 Jy ! Component: 150 - total flux cleaned = 0.00523639 Jy ! Component: 200 - total flux cleaned = 0.00494767 Jy ! Total flux subtracted in 200 components = 0.00494767 Jy ! Clean residual min=-0.004977 max=0.005033 Jy/beam ! Clean residual mean=0.000033 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.366689 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.366689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108126Jy sigma=0.000960 ! Fit after self-cal, rms=0.108072Jy sigma=0.000960 ! Inverting map ! Added new window around map position (42, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331134 Jy ! Component: 100 - total flux cleaned = 0.00415764 Jy ! Component: 150 - total flux cleaned = 0.0046812 Jy ! Component: 200 - total flux cleaned = 0.00468492 Jy ! Total flux subtracted in 200 components = 0.00468492 Jy ! Clean residual min=-0.004480 max=0.003959 Jy/beam ! Clean residual mean=0.000039 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.371374 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.371374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107746Jy sigma=0.000957 ! Fit after self-cal, rms=0.107712Jy sigma=0.000957 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107712Jy sigma=0.000957 ! Fit after self-cal, rms=0.107746Jy sigma=0.000950 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.053 mas, bpa=-2.185 degrees ! Estimated noise=762.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002807 Jy ! Component: 100 - total flux cleaned = 0.00279477 Jy ! Component: 150 - total flux cleaned = 0.00280258 Jy ! Component: 200 - total flux cleaned = 0.00280188 Jy ! Total flux subtracted in 200 components = 0.00280188 Jy ! Clean residual min=-0.004752 max=0.003875 Jy/beam ! Clean residual mean=0.000018 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.374176 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.374176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107483Jy sigma=0.000949 ! Fit after self-cal, rms=0.107453Jy sigma=0.000949 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614959 Jy ! Component: 100 - total flux cleaned = 0.000375787 Jy ! Component: 150 - total flux cleaned = 0.000102815 Jy ! Component: 200 - total flux cleaned = -9.71269e-05 Jy ! Total flux subtracted in 200 components = -9.71269e-05 Jy ! Clean residual min=-0.004508 max=0.003291 Jy/beam ! Clean residual mean=0.000018 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.374079 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.374079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107352Jy sigma=0.000949 ! Fit after self-cal, rms=0.107337Jy sigma=0.000949 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107337Jy sigma=0.000949 ! Fit after self-cal, rms=0.108165Jy sigma=0.000948 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.876 mas, bmaj=22.04 mas, bpa=0.9118 degrees ! Estimated noise=930.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383983 Jy ! Component: 100 - total flux cleaned = 0.00486922 Jy ! Component: 150 - total flux cleaned = 0.00511125 Jy ! Component: 200 - total flux cleaned = 0.00528294 Jy ! Total flux subtracted in 200 components = 0.00528294 Jy ! Clean residual min=-0.004586 max=0.003428 Jy/beam ! Clean residual mean=0.000025 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.379362 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 128 components and 0.379362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108007Jy sigma=0.000949 ! Fit after self-cal, rms=0.108006Jy sigma=0.000949 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015293 Jy ! Component: 100 - total flux cleaned = 4.84483e-06 Jy ! Component: 150 - total flux cleaned = 4.08521e-05 Jy ! Component: 200 - total flux cleaned = 4.05647e-05 Jy ! Total flux subtracted in 200 components = 4.05647e-05 Jy ! Clean residual min=-0.004401 max=0.003300 Jy/beam ! Clean residual mean=0.000021 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.379402 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 135 components and 0.379402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107974Jy sigma=0.000949 ! Fit after self-cal, rms=0.107976Jy sigma=0.000949 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.036 mas, bpa=-2.149 degrees ! Estimated noise=767.606 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.036 at -2.149 degrees (North through East) ! Clean map min=-0.0044342 max=0.2298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.334 mas, bmaj=5.59 mas, bpa=-1.855 degrees ! Estimated noise=1370.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168842 Jy ! Component: 100 - total flux cleaned = 0.240163 Jy ! Component: 150 - total flux cleaned = 0.283509 Jy ! Component: 200 - total flux cleaned = 0.312287 Jy ! Total flux subtracted in 200 components = 0.312287 Jy ! Clean residual min=-0.009003 max=0.015542 Jy/beam ! Clean residual mean=-0.000209 rms=0.002951 Jy/beam ! Combined flux in latest and established models = 0.312287 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.312287 Jy ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.036 mas, bpa=-2.149 degrees ! Estimated noise=767.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302215 Jy ! Component: 100 - total flux cleaned = 0.0454088 Jy ! Component: 150 - total flux cleaned = 0.0535022 Jy ! Component: 200 - total flux cleaned = 0.0583263 Jy ! Total flux subtracted in 200 components = 0.0583263 Jy ! Clean residual min=-0.004937 max=0.005698 Jy/beam ! Clean residual mean=-0.000021 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.370613 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 64 components and 0.370613 Jy ! Inverting map ! Added new window around map position (-3.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501873 Jy ! Component: 100 - total flux cleaned = 0.00688962 Jy ! Component: 150 - total flux cleaned = 0.00802721 Jy ! Component: 200 - total flux cleaned = 0.00875983 Jy ! Total flux subtracted in 200 components = 0.00875983 Jy ! Clean residual min=-0.004627 max=0.002965 Jy/beam ! Clean residual mean=0.000016 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.379373 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.379373 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.876 mas, bmaj=22.04 mas, bpa=0.9118 degrees ! Estimated noise=930.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043075 Jy ! Component: 100 - total flux cleaned = 0.000862186 Jy ! Component: 150 - total flux cleaned = 0.00127786 Jy ! Component: 200 - total flux cleaned = 0.00168271 Jy ! Total flux subtracted in 200 components = 0.00168271 Jy ! Clean residual min=-0.004920 max=0.003231 Jy/beam ! Clean residual mean=0.000032 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.381056 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203683 Jy ! Component: 100 - total flux cleaned = 0.000240967 Jy ! Component: 150 - total flux cleaned = 0.000240943 Jy ! Component: 200 - total flux cleaned = 0.000206641 Jy ! Total flux subtracted in 200 components = 0.000206641 Jy ! Clean residual min=-0.004828 max=0.003205 Jy/beam ! Clean residual mean=0.000030 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.381262 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.381262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.036 mas, bpa=-2.149 degrees ! Estimated noise=767.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000598877 Jy ! Component: 100 - total flux cleaned = -0.000732565 Jy ! Component: 150 - total flux cleaned = -0.000795968 Jy ! Component: 200 - total flux cleaned = -0.000798266 Jy ! Total flux subtracted in 200 components = -0.000798266 Jy ! Clean residual min=-0.004378 max=0.002960 Jy/beam ! Clean residual mean=0.000011 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.380464 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 126 components and 0.380464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107835Jy sigma=0.000948 ! Fit after self-cal, rms=0.107754Jy sigma=0.000948 wmodel J0730-3208_S_2014_01_04_pus_map.mod ! Writing 126 model components to file: J0730-3208_S_2014_01_04_pus_map.mod wobs J0730-3208_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0730-3208_S_2014_01_04_pus_uvs.fits wwins J0730-3208_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0730-3208_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017479 Jy ! Component: 100 - total flux cleaned = -0.00266468 Jy ! Component: 150 - total flux cleaned = -0.00307601 Jy ! Component: 200 - total flux cleaned = -0.00350885 Jy ! Component: 250 - total flux cleaned = -0.00378171 Jy ! Component: 300 - total flux cleaned = -0.00421285 Jy ! Component: 350 - total flux cleaned = -0.00458492 Jy ! Component: 400 - total flux cleaned = -0.00494458 Jy ! Component: 450 - total flux cleaned = -0.00525222 Jy ! Component: 500 - total flux cleaned = -0.00562351 Jy ! Component: 550 - total flux cleaned = -0.00583893 Jy ! Component: 600 - total flux cleaned = -0.00604988 Jy ! Component: 650 - total flux cleaned = -0.00628826 Jy ! Component: 700 - total flux cleaned = -0.0064207 Jy ! Component: 750 - total flux cleaned = -0.00655023 Jy ! Component: 800 - total flux cleaned = -0.00664571 Jy ! Component: 850 - total flux cleaned = -0.00676964 Jy ! Component: 900 - total flux cleaned = -0.00689053 Jy ! Component: 950 - total flux cleaned = -0.00697865 Jy ! Component: 1000 - total flux cleaned = -0.00700699 Jy ! Component: 1050 - total flux cleaned = -0.00709171 Jy ! Component: 1100 - total flux cleaned = -0.00725752 Jy ! Component: 1150 - total flux cleaned = -0.00733867 Jy ! Component: 1200 - total flux cleaned = -0.00744545 Jy ! Component: 1250 - total flux cleaned = -0.00760323 Jy ! Component: 1300 - total flux cleaned = -0.00775796 Jy ! Component: 1350 - total flux cleaned = -0.00796133 Jy ! Component: 1400 - total flux cleaned = -0.00808671 Jy ! Component: 1450 - total flux cleaned = -0.00825927 Jy ! Component: 1500 - total flux cleaned = -0.00835634 Jy ! Component: 1550 - total flux cleaned = -0.0083806 Jy ! Component: 1600 - total flux cleaned = -0.00849874 Jy ! Component: 1650 - total flux cleaned = -0.00856856 Jy ! Component: 1700 - total flux cleaned = -0.00861455 Jy ! Component: 1750 - total flux cleaned = -0.00872863 Jy ! Component: 1800 - total flux cleaned = -0.00884085 Jy ! Component: 1850 - total flux cleaned = -0.00901793 Jy ! Component: 1900 - total flux cleaned = -0.00901829 Jy ! Component: 1950 - total flux cleaned = -0.00910524 Jy ! Component: 2000 - total flux cleaned = -0.0091912 Jy ! Component: 2050 - total flux cleaned = -0.00931861 Jy ! Component: 2100 - total flux cleaned = -0.0093397 Jy ! Component: 2150 - total flux cleaned = -0.00940182 Jy ! Component: 2200 - total flux cleaned = -0.00942238 Jy ! Component: 2250 - total flux cleaned = -0.0095248 Jy ! Component: 2300 - total flux cleaned = -0.00956522 Jy ! Component: 2350 - total flux cleaned = -0.00962528 Jy ! Component: 2400 - total flux cleaned = -0.00968517 Jy ! Component: 2450 - total flux cleaned = -0.00974441 Jy ! Component: 2500 - total flux cleaned = -0.00978348 Jy ! Component: 2550 - total flux cleaned = -0.00990023 Jy ! Component: 2600 - total flux cleaned = -0.00990004 Jy ! Component: 2650 - total flux cleaned = -0.00991924 Jy ! Component: 2700 - total flux cleaned = -0.00995722 Jy ! Component: 2750 - total flux cleaned = -0.0100326 Jy ! Component: 2800 - total flux cleaned = -0.0099764 Jy ! Component: 2850 - total flux cleaned = -0.00997638 Jy ! Component: 2900 - total flux cleaned = -0.00999497 Jy ! Component: 2950 - total flux cleaned = -0.0099766 Jy ! Component: 3000 - total flux cleaned = -0.00993994 Jy ! Component: 3050 - total flux cleaned = -0.00986712 Jy ! Component: 3100 - total flux cleaned = -0.0097947 Jy ! Component: 3150 - total flux cleaned = -0.00975855 Jy ! Component: 3200 - total flux cleaned = -0.00972275 Jy ! Component: 3250 - total flux cleaned = -0.00966935 Jy ! Component: 3300 - total flux cleaned = -0.00965157 Jy ! Component: 3350 - total flux cleaned = -0.00961616 Jy ! Component: 3400 - total flux cleaned = -0.00954584 Jy ! Component: 3450 - total flux cleaned = -0.00952838 Jy ! Component: 3500 - total flux cleaned = -0.00949343 Jy ! Component: 3550 - total flux cleaned = -0.00947596 Jy ! Component: 3600 - total flux cleaned = -0.00942426 Jy ! Component: 3650 - total flux cleaned = -0.00944134 Jy ! Component: 3700 - total flux cleaned = -0.00933899 Jy ! Component: 3750 - total flux cleaned = -0.00932217 Jy ! Component: 3800 - total flux cleaned = -0.00930518 Jy ! Component: 3850 - total flux cleaned = -0.00923764 Jy ! Component: 3900 - total flux cleaned = -0.00915377 Jy ! Component: 3950 - total flux cleaned = -0.00913701 Jy ! Component: 4000 - total flux cleaned = -0.00912038 Jy ! Component: 4050 - total flux cleaned = -0.00908718 Jy ! Total flux subtracted in 4096 components = -0.00905409 Jy ! Clean residual min=-0.001038 max=0.001082 Jy/beam ! Clean residual mean=-0.000009 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.37141 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 368 components and 0.37141 Jy ![Exited script file: muppet] wmap "J0730-3208_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.036 at -2.149 degrees (North through East) ! Clean map min=-0.0032889 max=0.23434 Jy/beam ! Writing clean map to FITS file: J0730-3208_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.234344 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271508 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.347576 0.347576 0.695151 1.3903 2.78061 5.56121 11.1224 22.2448 44.4897 88.9794 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.234 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.036 at -2.149 degrees (North through East) ! Clean map min=-0.0032889 max=0.23434 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0730-3208_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:22 2017