! Started logfile: J0730-1141_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:20:12 2017 obs J0730-1141_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0730-1141_S_2014_01_04_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.496377 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0730-1141_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.131908Jy sigma=0.025700 ! Fit after self-cal, rms=1.521378Jy sigma=0.018300 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=5.722 mas, bpa=-2.658 degrees ! Estimated noise=1105.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78669 Jy ! Component: 100 - total flux cleaned = 2.22324 Jy ! Total flux subtracted in 100 components = 2.22324 Jy ! Clean residual min=-0.104544 max=0.183615 Jy/beam ! Clean residual mean=0.000678 rms=0.031391 Jy/beam ! Combined flux in latest and established models = 2.22324 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.22324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.528425Jy sigma=0.005936 ! Fit after self-cal, rms=0.527722Jy sigma=0.005931 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=6.652 mas, bpa=-3.513 degrees ! Estimated noise=660.006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284651 Jy ! Component: 100 - total flux cleaned = 0.421871 Jy ! Component: 150 - total flux cleaned = 0.496168 Jy ! Component: 200 - total flux cleaned = 0.537787 Jy ! Total flux subtracted in 200 components = 0.537787 Jy ! Clean residual min=-0.070141 max=0.102382 Jy/beam ! Clean residual mean=0.000578 rms=0.023507 Jy/beam ! Combined flux in latest and established models = 2.76103 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 39 components and 2.76103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332485Jy sigma=0.004159 ! Fit after self-cal, rms=0.331694Jy sigma=0.004148 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 1.01 ! MK 1.00 NL 0.98 OV 0.96 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.98 ! MK 1.00 NL 1.04 OV 0.99 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 0.80 ! MK 1.02 NL 1.00 OV 0.92 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.00* KP 1.00* LA 0.87 ! MK 1.01 NL 1.08 OV 0.99 PT 0.98 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.331694Jy sigma=0.004148 ! Fit after self-cal, rms=0.143780Jy sigma=0.001750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=6.665 mas, bpa=-3.14 degrees ! Estimated noise=663.055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052918 Jy ! Component: 100 - total flux cleaned = 0.060518 Jy ! Component: 150 - total flux cleaned = 0.0632531 Jy ! Component: 200 - total flux cleaned = 0.0650674 Jy ! Total flux subtracted in 200 components = 0.0650674 Jy ! Clean residual min=-0.020291 max=0.029681 Jy/beam ! Clean residual mean=-0.000004 rms=0.005259 Jy/beam ! Combined flux in latest and established models = 2.8261 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 2.8261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121715Jy sigma=0.001507 ! Fit after self-cal, rms=0.119955Jy sigma=0.001490 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119955Jy sigma=0.001490 ! Fit after self-cal, rms=0.111111Jy sigma=0.001348 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=6.66 mas, bpa=-3.114 degrees ! Estimated noise=661.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123251 Jy ! Component: 100 - total flux cleaned = 0.0132613 Jy ! Component: 150 - total flux cleaned = 0.0148688 Jy ! Component: 200 - total flux cleaned = 0.0162859 Jy ! Total flux subtracted in 200 components = 0.0162859 Jy ! Clean residual min=-0.012385 max=0.013627 Jy/beam ! Clean residual mean=-0.000013 rms=0.002828 Jy/beam ! Combined flux in latest and established models = 2.84238 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 2.84238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107016Jy sigma=0.001308 ! Fit after self-cal, rms=0.106752Jy sigma=0.001305 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00924142 Jy ! Component: 100 - total flux cleaned = 0.0109147 Jy ! Component: 150 - total flux cleaned = 0.0112021 Jy ! Component: 200 - total flux cleaned = 0.0112032 Jy ! Total flux subtracted in 200 components = 0.0112032 Jy ! Clean residual min=-0.010261 max=0.010422 Jy/beam ! Clean residual mean=-0.000012 rms=0.002357 Jy/beam ! Combined flux in latest and established models = 2.85359 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 2.85359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104617Jy sigma=0.001284 ! Fit after self-cal, rms=0.104523Jy sigma=0.001283 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104523Jy sigma=0.001283 ! Fit after self-cal, rms=0.104340Jy sigma=0.001281 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=6.659 mas, bpa=-3.068 degrees ! Estimated noise=661.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521433 Jy ! Component: 100 - total flux cleaned = 0.00593963 Jy ! Component: 150 - total flux cleaned = 0.00637552 Jy ! Component: 200 - total flux cleaned = 0.00638379 Jy ! Total flux subtracted in 200 components = 0.00638379 Jy ! Clean residual min=-0.008148 max=0.009823 Jy/beam ! Clean residual mean=-0.000005 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 2.85997 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 2.85997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103250Jy sigma=0.001271 ! Fit after self-cal, rms=0.103193Jy sigma=0.001270 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429568 Jy ! Component: 100 - total flux cleaned = 0.0053043 Jy ! Component: 150 - total flux cleaned = 0.00658611 Jy ! Component: 200 - total flux cleaned = 0.00775795 Jy ! Total flux subtracted in 200 components = 0.00775795 Jy ! Clean residual min=-0.007617 max=0.007467 Jy/beam ! Clean residual mean=-0.000005 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 2.86773 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 2.86773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101909Jy sigma=0.001259 ! Fit after self-cal, rms=0.101851Jy sigma=0.001259 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101851Jy sigma=0.001259 ! Fit after self-cal, rms=0.101900Jy sigma=0.001258 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.763 mas, bmaj=13.79 mas, bpa=-2.664 degrees ! Estimated noise=808.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050067 Jy ! Component: 100 - total flux cleaned = 0.00761878 Jy ! Component: 150 - total flux cleaned = 0.00881073 Jy ! Component: 200 - total flux cleaned = 0.0098305 Jy ! Total flux subtracted in 200 components = 0.0098305 Jy ! Clean residual min=-0.005711 max=0.004264 Jy/beam ! Clean residual mean=-0.000005 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 2.87756 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 134 components and 2.87756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101764Jy sigma=0.001255 ! Fit after self-cal, rms=0.101752Jy sigma=0.001255 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424068 Jy ! Component: 100 - total flux cleaned = 0.00068408 Jy ! Component: 150 - total flux cleaned = 0.00084244 Jy ! Component: 200 - total flux cleaned = 0.00105691 Jy ! Total flux subtracted in 200 components = 0.00105691 Jy ! Clean residual min=-0.005105 max=0.003803 Jy/beam ! Clean residual mean=-0.000010 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 2.87862 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 145 components and 2.87862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101721Jy sigma=0.001254 ! Fit after self-cal, rms=0.101713Jy sigma=0.001254 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=6.659 mas, bpa=-3.046 degrees ! Estimated noise=662.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.093 x 6.659 at -3.046 degrees (North through East) ! Clean map min=-0.0062014 max=2.3685 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101713Jy sigma=0.001254 ! Fit after self-cal, rms=0.075681Jy sigma=0.000849 ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=6.658 mas, bpa=-3.042 degrees ! Estimated noise=662.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424091 Jy ! Component: 100 - total flux cleaned = 0.00508094 Jy ! Component: 150 - total flux cleaned = 0.00537159 Jy ! Component: 200 - total flux cleaned = 0.00523673 Jy ! Total flux subtracted in 200 components = 0.00523673 Jy ! Clean residual min=-0.005771 max=0.005844 Jy/beam ! Clean residual mean=-0.000004 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 2.88385 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 164 components and 2.88385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074925Jy sigma=0.000842 ! Fit after self-cal, rms=0.074910Jy sigma=0.000842 ! Inverting map ! Added new window around map position (22.5, -21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103406 Jy ! Component: 100 - total flux cleaned = 0.00137268 Jy ! Component: 150 - total flux cleaned = 0.00137194 Jy ! Component: 200 - total flux cleaned = 0.0012435 Jy ! Total flux subtracted in 200 components = 0.0012435 Jy ! Clean residual min=-0.005148 max=0.005260 Jy/beam ! Clean residual mean=-0.000007 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 2.8851 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 182 components and 2.8851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074123Jy sigma=0.000834 ! Fit after self-cal, rms=0.074057Jy sigma=0.000833 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074057Jy sigma=0.000833 ! Fit after self-cal, rms=0.074067Jy sigma=0.000832 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=5.707 mas, bpa=-2.193 degrees ! Estimated noise=1128.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79218 Jy ! Component: 100 - total flux cleaned = 2.23379 Jy ! Component: 150 - total flux cleaned = 2.44265 Jy ! Component: 200 - total flux cleaned = 2.55942 Jy ! Total flux subtracted in 200 components = 2.55942 Jy ! Clean residual min=-0.032550 max=0.058812 Jy/beam ! Clean residual mean=0.000096 rms=0.010836 Jy/beam ! Combined flux in latest and established models = 2.55942 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.55942 Jy ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=6.657 mas, bpa=-3.042 degrees ! Estimated noise=662.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.099465 Jy ! Component: 100 - total flux cleaned = 0.155061 Jy ! Component: 150 - total flux cleaned = 0.192933 Jy ! Component: 200 - total flux cleaned = 0.220074 Jy ! Total flux subtracted in 200 components = 0.220074 Jy ! Clean residual min=-0.014761 max=0.018739 Jy/beam ! Clean residual mean=0.000077 rms=0.005055 Jy/beam ! Combined flux in latest and established models = 2.77949 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 61 components and 2.77949 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.761 mas, bmaj=13.79 mas, bpa=-2.65 degrees ! Estimated noise=809.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323381 Jy ! Component: 100 - total flux cleaned = 0.0518331 Jy ! Component: 150 - total flux cleaned = 0.0645967 Jy ! Component: 200 - total flux cleaned = 0.074063 Jy ! Total flux subtracted in 200 components = 0.074063 Jy ! Clean residual min=-0.007125 max=0.008170 Jy/beam ! Clean residual mean=0.000037 rms=0.003089 Jy/beam ! Combined flux in latest and established models = 2.85355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743629 Jy ! Component: 100 - total flux cleaned = 0.0133762 Jy ! Component: 150 - total flux cleaned = 0.0181635 Jy ! Component: 200 - total flux cleaned = 0.0220947 Jy ! Total flux subtracted in 200 components = 0.0220947 Jy ! Clean residual min=-0.004385 max=0.005376 Jy/beam ! Clean residual mean=0.000011 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 2.87565 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 140 components and 2.87565 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=6.657 mas, bpa=-3.042 degrees ! Estimated noise=662.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478695 Jy ! Component: 100 - total flux cleaned = 0.00595041 Jy ! Component: 150 - total flux cleaned = 0.00765827 Jy ! Component: 200 - total flux cleaned = 0.00919051 Jy ! Total flux subtracted in 200 components = 0.00919051 Jy ! Clean residual min=-0.007240 max=0.007020 Jy/beam ! Clean residual mean=0.000004 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 2.88484 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 160 components and 2.88484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075163Jy sigma=0.000848 ! Fit after self-cal, rms=0.075034Jy sigma=0.000846 wmodel J0730-1141_S_2014_01_04_pus_map.mod ! Writing 160 model components to file: J0730-1141_S_2014_01_04_pus_map.mod wobs J0730-1141_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0730-1141_S_2014_01_04_pus_uvs.fits wwins J0730-1141_S_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J0730-1141_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126052 Jy ! Component: 100 - total flux cleaned = -0.000613595 Jy ! Component: 150 - total flux cleaned = 7.09318e-05 Jy ! Component: 200 - total flux cleaned = 0.00109392 Jy ! Component: 250 - total flux cleaned = 0.0021545 Jy ! Component: 300 - total flux cleaned = 0.00325003 Jy ! Component: 350 - total flux cleaned = 0.0041395 Jy ! Component: 400 - total flux cleaned = 0.00483646 Jy ! Component: 450 - total flux cleaned = 0.00543151 Jy ! Component: 500 - total flux cleaned = 0.00600818 Jy ! Component: 550 - total flux cleaned = 0.00642668 Jy ! Component: 600 - total flux cleaned = 0.00690158 Jy ! Component: 650 - total flux cleaned = 0.00749597 Jy ! Component: 700 - total flux cleaned = 0.00788112 Jy ! Component: 750 - total flux cleaned = 0.00838322 Jy ! Component: 800 - total flux cleaned = 0.00874974 Jy ! Component: 850 - total flux cleaned = 0.00916828 Jy ! Component: 900 - total flux cleaned = 0.00945967 Jy ! Component: 950 - total flux cleaned = 0.00980295 Jy ! Component: 1000 - total flux cleaned = 0.0102514 Jy ! Component: 1050 - total flux cleaned = 0.0106353 Jy ! Component: 1100 - total flux cleaned = 0.010957 Jy ! Component: 1150 - total flux cleaned = 0.011221 Jy ! Component: 1200 - total flux cleaned = 0.0114806 Jy ! Component: 1250 - total flux cleaned = 0.0118855 Jy ! Component: 1300 - total flux cleaned = 0.0118837 Jy ! Component: 1350 - total flux cleaned = 0.0119335 Jy ! Component: 1400 - total flux cleaned = 0.0120785 Jy ! Component: 1450 - total flux cleaned = 0.0122687 Jy ! Component: 1500 - total flux cleaned = 0.0125483 Jy ! Component: 1550 - total flux cleaned = 0.0126853 Jy ! Component: 1600 - total flux cleaned = 0.0127759 Jy ! Component: 1650 - total flux cleaned = 0.0130423 Jy ! Component: 1700 - total flux cleaned = 0.0130848 Jy ! Component: 1750 - total flux cleaned = 0.0131283 Jy ! Component: 1800 - total flux cleaned = 0.0134259 Jy ! Component: 1850 - total flux cleaned = 0.0135095 Jy ! Component: 1900 - total flux cleaned = 0.0135925 Jy ! Component: 1950 - total flux cleaned = 0.0138366 Jy ! Component: 2000 - total flux cleaned = 0.0140371 Jy ! Component: 2050 - total flux cleaned = 0.0141166 Jy ! Component: 2100 - total flux cleaned = 0.0143116 Jy ! Component: 2150 - total flux cleaned = 0.0145029 Jy ! Component: 2200 - total flux cleaned = 0.0145408 Jy ! Component: 2250 - total flux cleaned = 0.0148028 Jy ! Component: 2300 - total flux cleaned = 0.0149499 Jy ! Component: 2350 - total flux cleaned = 0.0151677 Jy ! Component: 2400 - total flux cleaned = 0.0152032 Jy ! Component: 2450 - total flux cleaned = 0.0153103 Jy ! Component: 2500 - total flux cleaned = 0.0153808 Jy ! Component: 2550 - total flux cleaned = 0.0155194 Jy ! Component: 2600 - total flux cleaned = 0.0156223 Jy ! Component: 2650 - total flux cleaned = 0.0156557 Jy ! Component: 2700 - total flux cleaned = 0.0156558 Jy ! Component: 2750 - total flux cleaned = 0.0157552 Jy ! Component: 2800 - total flux cleaned = 0.0158526 Jy ! Component: 2850 - total flux cleaned = 0.0159492 Jy ! Component: 2900 - total flux cleaned = 0.0159809 Jy ! Component: 2950 - total flux cleaned = 0.0160438 Jy ! Component: 3000 - total flux cleaned = 0.0162307 Jy ! Component: 3050 - total flux cleaned = 0.0161689 Jy ! Component: 3100 - total flux cleaned = 0.016291 Jy ! Component: 3150 - total flux cleaned = 0.0163513 Jy ! Component: 3200 - total flux cleaned = 0.016441 Jy ! Component: 3250 - total flux cleaned = 0.0165887 Jy ! Component: 3300 - total flux cleaned = 0.0166761 Jy ! Component: 3350 - total flux cleaned = 0.0167631 Jy ! Component: 3400 - total flux cleaned = 0.0167918 Jy ! Component: 3450 - total flux cleaned = 0.0169905 Jy ! Component: 3500 - total flux cleaned = 0.0170468 Jy ! Component: 3550 - total flux cleaned = 0.0172696 Jy ! Component: 3600 - total flux cleaned = 0.0173799 Jy ! Component: 3650 - total flux cleaned = 0.0174897 Jy ! Component: 3700 - total flux cleaned = 0.017571 Jy ! Component: 3750 - total flux cleaned = 0.0177592 Jy ! Component: 3800 - total flux cleaned = 0.0177594 Jy ! Component: 3850 - total flux cleaned = 0.0179448 Jy ! Component: 3900 - total flux cleaned = 0.0181288 Jy ! Component: 3950 - total flux cleaned = 0.0182329 Jy ! Component: 4000 - total flux cleaned = 0.0183366 Jy ! Component: 4050 - total flux cleaned = 0.0184138 Jy ! Total flux subtracted in 4096 components = 0.0185415 Jy ! Clean residual min=-0.001583 max=0.001368 Jy/beam ! Clean residual mean=0.000002 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 2.90338 Jy keep ! Adding 209 model components to the UV plane model. ! The established model now contains 369 components and 2.90338 Jy ![Exited script file: muppet] wmap "J0730-1141_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 6.657 at -3.042 degrees (North through East) ! Clean map min=-0.004408 max=2.3774 Jy/beam ! Writing clean map to FITS file: J0730-1141_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.3774 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000411974 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0519863 0.0519863 0.103973 0.207945 0.415891 0.831782 1.66356 3.32713 6.65425 13.3085 26.617 53.234 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.377 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 6.657 at -3.042 degrees (North through East) ! Clean map min=-0.004408 max=2.3774 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0730-1141_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:16 2017