! Started logfile: J0729-3639_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:26:35 2016 obs J0729-3639_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0729-3639_S_2014_12_20_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.398013 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0729-3639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 8812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0729-3639_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.768599Jy sigma=0.006091 ! Fit after self-cal, rms=0.692526Jy sigma=0.005406 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.588 mas, bmaj=30.35 mas, bpa=-2.13 degrees ! Estimated noise=1155.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267014 Jy ! Component: 100 - total flux cleaned = 0.404478 Jy ! Total flux subtracted in 100 components = 0.404478 Jy ! Clean residual min=-0.029333 max=0.069063 Jy/beam ! Clean residual mean=-0.001334 rms=0.015314 Jy/beam ! Combined flux in latest and established models = 0.404478 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.404478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214867Jy sigma=0.001687 ! Fit after self-cal, rms=0.211613Jy sigma=0.001666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.941 mas, bmaj=35.67 mas, bpa=0.02511 degrees ! Estimated noise=937.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117914 Jy ! Component: 100 - total flux cleaned = 0.182139 Jy ! Component: 150 - total flux cleaned = 0.22101 Jy ! Component: 200 - total flux cleaned = 0.247491 Jy ! Total flux subtracted in 200 components = 0.247491 Jy ! Clean residual min=-0.019946 max=0.036736 Jy/beam ! Clean residual mean=-0.000708 rms=0.007780 Jy/beam ! Combined flux in latest and established models = 0.651968 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 117 components and 0.651968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131682Jy sigma=0.000975 ! Fit after self-cal, rms=0.131282Jy sigma=0.000973 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.86 HN 1.00* KP 1.08 ! LA 0.92 MK 1.00* NL 1.42 OV 1.03 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.00* KP 1.05 ! LA 0.90 MK 1.00* NL 1.47 OV 1.05 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.16 HN 1.00* KP 0.94 ! LA 0.74 MK 1.00* NL 1.59 OV 0.98 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.00* KP 0.90 ! LA 0.80 MK 1.00* NL 1.51 OV 1.04 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.131282Jy sigma=0.000973 ! Fit after self-cal, rms=0.121054Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.729 mas, bmaj=37.65 mas, bpa=1.544 degrees ! Estimated noise=984.393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147509 Jy ! Component: 100 - total flux cleaned = 0.0155343 Jy ! Component: 150 - total flux cleaned = 0.0155252 Jy ! Component: 200 - total flux cleaned = 0.0157334 Jy ! Total flux subtracted in 200 components = 0.0157334 Jy ! Clean residual min=-0.006907 max=0.013405 Jy/beam ! Clean residual mean=-0.000044 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 0.667702 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 168 components and 0.667702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119061Jy sigma=0.000773 ! Fit after self-cal, rms=0.118834Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118834Jy sigma=0.000770 ! Fit after self-cal, rms=0.115742Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.659 mas, bmaj=37.62 mas, bpa=1.499 degrees ! Estimated noise=977.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383685 Jy ! Component: 100 - total flux cleaned = 0.00384799 Jy ! Component: 150 - total flux cleaned = 0.00400299 Jy ! Component: 200 - total flux cleaned = 0.00429159 Jy ! Total flux subtracted in 200 components = 0.00429159 Jy ! Clean residual min=-0.005183 max=0.010582 Jy/beam ! Clean residual mean=-0.000032 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 0.671993 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 208 components and 0.671993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115038Jy sigma=0.000763 ! Fit after self-cal, rms=0.114946Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554704 Jy ! Component: 100 - total flux cleaned = 0.00674864 Jy ! Component: 150 - total flux cleaned = 0.0078856 Jy ! Component: 200 - total flux cleaned = 0.00898448 Jy ! Total flux subtracted in 200 components = 0.00898448 Jy ! Clean residual min=-0.004337 max=0.005039 Jy/beam ! Clean residual mean=0.000010 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.680978 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 243 components and 0.680978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114094Jy sigma=0.000756 ! Fit after self-cal, rms=0.114080Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114080Jy sigma=0.000756 ! Fit after self-cal, rms=0.110777Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.581 mas, bmaj=37.63 mas, bpa=1.453 degrees ! Estimated noise=969.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038426 Jy ! Component: 100 - total flux cleaned = 0.00526332 Jy ! Component: 150 - total flux cleaned = 0.00613628 Jy ! Component: 200 - total flux cleaned = 0.00671609 Jy ! Total flux subtracted in 200 components = 0.00671609 Jy ! Clean residual min=-0.003090 max=0.003829 Jy/beam ! Clean residual mean=0.000016 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.687694 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 278 components and 0.687694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110436Jy sigma=0.000753 ! Fit after self-cal, rms=0.110430Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770389 Jy ! Component: 100 - total flux cleaned = 0.00117892 Jy ! Component: 150 - total flux cleaned = 0.00147023 Jy ! Component: 200 - total flux cleaned = 0.00174316 Jy ! Total flux subtracted in 200 components = 0.00174316 Jy ! Clean residual min=-0.002897 max=0.003627 Jy/beam ! Clean residual mean=0.000022 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.689437 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 307 components and 0.689437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110299Jy sigma=0.000752 ! Fit after self-cal, rms=0.110297Jy sigma=0.000752 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110297Jy sigma=0.000752 ! Fit after self-cal, rms=0.109005Jy sigma=0.000752 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.81 mas, bmaj=41.15 mas, bpa=2.171 degrees ! Estimated noise=951.689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171864 Jy ! Component: 100 - total flux cleaned = 0.00229333 Jy ! Component: 150 - total flux cleaned = 0.00251445 Jy ! Component: 200 - total flux cleaned = 0.00259457 Jy ! Total flux subtracted in 200 components = 0.00259457 Jy ! Clean residual min=-0.002139 max=0.002833 Jy/beam ! Clean residual mean=0.000016 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.692031 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 342 components and 0.692031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108932Jy sigma=0.000751 ! Fit after self-cal, rms=0.108927Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346748 Jy ! Component: 100 - total flux cleaned = 0.000492794 Jy ! Component: 150 - total flux cleaned = 0.000525503 Jy ! Component: 200 - total flux cleaned = 0.000558517 Jy ! Total flux subtracted in 200 components = 0.000558517 Jy ! Clean residual min=-0.002004 max=0.002704 Jy/beam ! Clean residual mean=0.000018 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.69259 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 378 components and 0.69259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108889Jy sigma=0.000751 ! Fit after self-cal, rms=0.108888Jy sigma=0.000751 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.546 mas, bmaj=37.63 mas, bpa=1.39 degrees ! Estimated noise=965.866 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.546 x 37.63 at 1.39 degrees (North through East) ! Clean map min=-0.0057006 max=0.37476 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.07 mas, bmaj=31.77 mas, bpa=-0.615 degrees ! Estimated noise=1262.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.285767 Jy ! Component: 100 - total flux cleaned = 0.427512 Jy ! Component: 150 - total flux cleaned = 0.50711 Jy ! Component: 200 - total flux cleaned = 0.55823 Jy ! Total flux subtracted in 200 components = 0.55823 Jy ! Clean residual min=-0.012869 max=0.027639 Jy/beam ! Clean residual mean=-0.000549 rms=0.006153 Jy/beam ! Combined flux in latest and established models = 0.558231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 65 model components to the UV plane model. ! The established model now contains 65 components and 0.558231 Jy ! Inverting map and beam ! Estimated beam: bmin=9.546 mas, bmaj=37.63 mas, bpa=1.39 degrees ! Estimated noise=965.866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04357 Jy ! Component: 100 - total flux cleaned = 0.0697929 Jy ! Component: 150 - total flux cleaned = 0.0862212 Jy ! Component: 200 - total flux cleaned = 0.0973927 Jy ! Total flux subtracted in 200 components = 0.0973927 Jy ! Clean residual min=-0.005737 max=0.006434 Jy/beam ! Clean residual mean=-0.000180 rms=0.002224 Jy/beam ! Combined flux in latest and established models = 0.655623 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 159 components and 0.655623 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.81 mas, bmaj=41.15 mas, bpa=2.171 degrees ! Estimated noise=951.689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00934167 Jy ! Component: 100 - total flux cleaned = 0.0155975 Jy ! Component: 150 - total flux cleaned = 0.0191891 Jy ! Component: 200 - total flux cleaned = 0.0216091 Jy ! Total flux subtracted in 200 components = 0.0216091 Jy ! Clean residual min=-0.003812 max=0.003778 Jy/beam ! Clean residual mean=-0.000077 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.677232 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170797 Jy ! Component: 100 - total flux cleaned = 0.00329119 Jy ! Component: 150 - total flux cleaned = 0.00455866 Jy ! Component: 200 - total flux cleaned = 0.0058664 Jy ! Total flux subtracted in 200 components = 0.0058664 Jy ! Clean residual min=-0.002756 max=0.003370 Jy/beam ! Clean residual mean=-0.000039 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.683099 Jy ! Adding 207 model components to the UV plane model. ! The established model now contains 359 components and 0.683099 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.546 mas, bmaj=37.63 mas, bpa=1.39 degrees ! Estimated noise=965.866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059758 Jy ! Component: 100 - total flux cleaned = 0.00146683 Jy ! Component: 150 - total flux cleaned = 0.00237783 Jy ! Component: 200 - total flux cleaned = 0.00318926 Jy ! Total flux subtracted in 200 components = 0.00318926 Jy ! Clean residual min=-0.002306 max=0.003367 Jy/beam ! Clean residual mean=-0.000015 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.686288 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 412 components and 0.686288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108853Jy sigma=0.000751 ! Fit after self-cal, rms=0.108848Jy sigma=0.000751 wmodel J0729-3639_S_2014_12_20_pus_map.mod ! Writing 412 model components to file: J0729-3639_S_2014_12_20_pus_map.mod wobs J0729-3639_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0729-3639_S_2014_12_20_pus_uvs.fits wwins J0729-3639_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J0729-3639_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114928 Jy ! Component: 100 - total flux cleaned = 0.00151145 Jy ! Component: 150 - total flux cleaned = 0.00183862 Jy ! Component: 200 - total flux cleaned = 0.00197098 Jy ! Component: 250 - total flux cleaned = 0.00219065 Jy ! Component: 300 - total flux cleaned = 0.00236819 Jy ! Component: 350 - total flux cleaned = 0.00256538 Jy ! Component: 400 - total flux cleaned = 0.00253815 Jy ! Component: 450 - total flux cleaned = 0.00251169 Jy ! Component: 500 - total flux cleaned = 0.00241218 Jy ! Component: 550 - total flux cleaned = 0.00236392 Jy ! Component: 600 - total flux cleaned = 0.00231689 Jy ! Component: 650 - total flux cleaned = 0.00227156 Jy ! Component: 700 - total flux cleaned = 0.0022491 Jy ! Component: 750 - total flux cleaned = 0.00214082 Jy ! Component: 800 - total flux cleaned = 0.00211976 Jy ! Component: 850 - total flux cleaned = 0.00203677 Jy ! Component: 900 - total flux cleaned = 0.0019561 Jy ! Component: 950 - total flux cleaned = 0.00187681 Jy ! Component: 1000 - total flux cleaned = 0.00179948 Jy ! Component: 1050 - total flux cleaned = 0.0016675 Jy ! Component: 1100 - total flux cleaned = 0.00163065 Jy ! Component: 1150 - total flux cleaned = 0.00154035 Jy ! Component: 1200 - total flux cleaned = 0.00150491 Jy ! Component: 1250 - total flux cleaned = 0.00143551 Jy ! Component: 1300 - total flux cleaned = 0.00136701 Jy ! Component: 1350 - total flux cleaned = 0.00129986 Jy ! Component: 1400 - total flux cleaned = 0.00121725 Jy ! Component: 1450 - total flux cleaned = 0.00116872 Jy ! Component: 1500 - total flux cleaned = 0.00115258 Jy ! Component: 1550 - total flux cleaned = 0.00110575 Jy ! Component: 1600 - total flux cleaned = 0.00109034 Jy ! Component: 1650 - total flux cleaned = 0.00104474 Jy ! Component: 1700 - total flux cleaned = 0.00100013 Jy ! Component: 1750 - total flux cleaned = 0.00107369 Jy ! Component: 1800 - total flux cleaned = 0.00101522 Jy ! Component: 1850 - total flux cleaned = 0.00101514 Jy ! Component: 1900 - total flux cleaned = 0.00101513 Jy ! Component: 1950 - total flux cleaned = 0.00100118 Jy ! Component: 2000 - total flux cleaned = 0.000973758 Jy ! Component: 2050 - total flux cleaned = 0.00101463 Jy ! Component: 2100 - total flux cleaned = 0.00100127 Jy ! Component: 2150 - total flux cleaned = 0.00102797 Jy ! Component: 2200 - total flux cleaned = 0.00104108 Jy ! Component: 2250 - total flux cleaned = 0.00100216 Jy ! Component: 2300 - total flux cleaned = 0.000950536 Jy ! Component: 2350 - total flux cleaned = 0.000886557 Jy ! Component: 2400 - total flux cleaned = 0.000861258 Jy ! Component: 2450 - total flux cleaned = 0.00082354 Jy ! Component: 2500 - total flux cleaned = 0.000773874 Jy ! Component: 2550 - total flux cleaned = 0.000724678 Jy ! Component: 2600 - total flux cleaned = 0.000700168 Jy ! Component: 2650 - total flux cleaned = 0.000675795 Jy ! Component: 2700 - total flux cleaned = 0.000591627 Jy ! Component: 2750 - total flux cleaned = 0.000555829 Jy ! Component: 2800 - total flux cleaned = 0.000508607 Jy ! Component: 2850 - total flux cleaned = 0.000485123 Jy ! Component: 2900 - total flux cleaned = 0.000415203 Jy ! Component: 2950 - total flux cleaned = 0.000357518 Jy ! Component: 3000 - total flux cleaned = 0.000346124 Jy ! Component: 3050 - total flux cleaned = 0.000289171 Jy ! Component: 3100 - total flux cleaned = 0.000255327 Jy ! Component: 3150 - total flux cleaned = 0.000244096 Jy ! Component: 3200 - total flux cleaned = 0.000188188 Jy ! Component: 3250 - total flux cleaned = 0.000165857 Jy ! Component: 3300 - total flux cleaned = 0.000110452 Jy ! Component: 3350 - total flux cleaned = 8.82842e-05 Jy ! Component: 3400 - total flux cleaned = 2.22176e-05 Jy ! Component: 3450 - total flux cleaned = 2.14376e-07 Jy ! Component: 3500 - total flux cleaned = -4.34684e-05 Jy ! Component: 3550 - total flux cleaned = -0.000108829 Jy ! Component: 3600 - total flux cleaned = -0.000173948 Jy ! Component: 3650 - total flux cleaned = -0.000206448 Jy ! Component: 3700 - total flux cleaned = -0.000271317 Jy ! Component: 3750 - total flux cleaned = -0.000303704 Jy ! Component: 3800 - total flux cleaned = -0.000357562 Jy ! Component: 3850 - total flux cleaned = -0.000400566 Jy ! Component: 3900 - total flux cleaned = -0.000464932 Jy ! Component: 3950 - total flux cleaned = -0.000507728 Jy ! Component: 4000 - total flux cleaned = -0.000561196 Jy ! Component: 4050 - total flux cleaned = -0.000625267 Jy ! Total flux subtracted in 4096 components = -0.000646537 Jy ! Clean residual min=-0.000588 max=0.000616 Jy/beam ! Clean residual mean=-0.000002 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.685642 Jy keep ! Adding 411 model components to the UV plane model. ! The established model now contains 823 components and 0.685642 Jy ![Exited script file: muppet] wmap "J0729-3639_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.546 x 37.63 at 1.39 degrees (North through East) ! Clean map min=-0.0046386 max=0.38482 Jy/beam ! Writing clean map to FITS file: J0729-3639_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.384823 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000231984 device "J0729-3639_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0729-3639_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.18085 0.18085 0.3617 0.723401 1.4468 2.8936 5.78721 11.5744 23.1488 46.2976 92.5953 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.384 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.546 x 37.63 at 1.39 degrees (North through East) ! Clean map min=-0.0046386 max=0.38482 Jy/beam quit ! Quitting program ! Log file J0729-3639_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:26:45 2016