! Started logfile: J0729-3439_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:20:06 2017 obs J0729-3439_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0729-3439_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0729-3439 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0729-3439_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.976528Jy sigma=0.009302 ! Fit after self-cal, rms=0.930169Jy sigma=0.008892 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=5.842 mas, bpa=-3.576 degrees ! Estimated noise=1499.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530836 Jy ! Component: 100 - total flux cleaned = 0.0704736 Jy ! Total flux subtracted in 100 components = 0.0704736 Jy ! Clean residual min=-0.008159 max=0.010794 Jy/beam ! Clean residual mean=-0.000049 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 0.0704736 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0704736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135117Jy sigma=0.000923 ! Fit after self-cal, rms=0.134998Jy sigma=0.000921 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.816 mas, bmaj=7.004 mas, bpa=-4.278 degrees ! Estimated noise=771.594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018146 Jy ! Component: 100 - total flux cleaned = 0.0276991 Jy ! Component: 150 - total flux cleaned = 0.032893 Jy ! Component: 200 - total flux cleaned = 0.0357479 Jy ! Total flux subtracted in 200 components = 0.0357479 Jy ! Clean residual min=-0.007133 max=0.006749 Jy/beam ! Clean residual mean=0.000025 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 0.106222 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 56 components and 0.106222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131829Jy sigma=0.000892 ! Fit after self-cal, rms=0.131850Jy sigma=0.000890 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* KP 1.00* LA 1.08 ! MK 0.97 NL 1.24 OV 1.02 PT 1.11 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 1.02 ! MK 0.98 NL 1.26 OV 1.03 PT 1.07 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.00* KP 1.00* LA 0.85 ! MK 1.04 NL 1.12 OV 0.93 PT 0.98 ! SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.89 ! MK 1.05 NL 1.25 OV 1.07 PT 1.01 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.131850Jy sigma=0.000890 ! Fit after self-cal, rms=0.120560Jy sigma=0.000881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=6.965 mas, bpa=-3.916 degrees ! Estimated noise=782.917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273373 Jy ! Component: 100 - total flux cleaned = 0.00400571 Jy ! Component: 150 - total flux cleaned = 0.00417461 Jy ! Component: 200 - total flux cleaned = 0.00426568 Jy ! Total flux subtracted in 200 components = 0.00426568 Jy ! Clean residual min=-0.005007 max=0.006212 Jy/beam ! Clean residual mean=0.000005 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.110487 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.110487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120398Jy sigma=0.000882 ! Fit after self-cal, rms=0.120881Jy sigma=0.000880 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120881Jy sigma=0.000880 ! Fit after self-cal, rms=0.123551Jy sigma=0.000878 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=6.87 mas, bpa=-3.729 degrees ! Estimated noise=804.943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033763 Jy ! Component: 100 - total flux cleaned = 0.0050793 Jy ! Component: 150 - total flux cleaned = 0.00575525 Jy ! Component: 200 - total flux cleaned = 0.00590967 Jy ! Total flux subtracted in 200 components = 0.00590967 Jy ! Clean residual min=-0.005035 max=0.006019 Jy/beam ! Clean residual mean=-0.000019 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.116397 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.116397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123339Jy sigma=0.000878 ! Fit after self-cal, rms=0.123557Jy sigma=0.000878 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, -28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296768 Jy ! Component: 100 - total flux cleaned = 0.00348696 Jy ! Component: 150 - total flux cleaned = 0.00385373 Jy ! Component: 200 - total flux cleaned = 0.00410951 Jy ! Total flux subtracted in 200 components = 0.00410951 Jy ! Clean residual min=-0.004661 max=0.005261 Jy/beam ! Clean residual mean=0.000008 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.120506 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.120506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123284Jy sigma=0.000875 ! Fit after self-cal, rms=0.123386Jy sigma=0.000874 ! Inverting map ! Added new window around map position (19, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450294 Jy ! Component: 100 - total flux cleaned = 0.00576352 Jy ! Component: 150 - total flux cleaned = 0.00671858 Jy ! Component: 200 - total flux cleaned = 0.00722255 Jy ! Total flux subtracted in 200 components = 0.00722255 Jy ! Clean residual min=-0.004192 max=0.004786 Jy/beam ! Clean residual mean=0.000012 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.127729 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.127729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123103Jy sigma=0.000871 ! Fit after self-cal, rms=0.123124Jy sigma=0.000870 ! Inverting map ! Added new window around map position (-46, 89). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426637 Jy ! Component: 100 - total flux cleaned = 0.00569512 Jy ! Component: 150 - total flux cleaned = 0.00625465 Jy ! Component: 200 - total flux cleaned = 0.00657838 Jy ! Total flux subtracted in 200 components = 0.00657838 Jy ! Clean residual min=-0.003901 max=0.003794 Jy/beam ! Clean residual mean=0.000019 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.134307 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 130 components and 0.134307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122759Jy sigma=0.000868 ! Fit after self-cal, rms=0.122760Jy sigma=0.000868 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122760Jy sigma=0.000868 ! Fit after self-cal, rms=0.108143Jy sigma=0.000856 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=6.79 mas, bpa=-3.317 degrees ! Estimated noise=794.769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195081 Jy ! Component: 100 - total flux cleaned = 0.00282716 Jy ! Component: 150 - total flux cleaned = 0.00325802 Jy ! Component: 200 - total flux cleaned = 0.00370216 Jy ! Total flux subtracted in 200 components = 0.00370216 Jy ! Clean residual min=-0.002984 max=0.003445 Jy/beam ! Clean residual mean=-0.000031 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.13801 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 156 components and 0.138009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108017Jy sigma=0.000854 ! Fit after self-cal, rms=0.108206Jy sigma=0.000851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 47.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194844 Jy ! Component: 100 - total flux cleaned = 0.00272425 Jy ! Component: 150 - total flux cleaned = 0.00281081 Jy ! Component: 200 - total flux cleaned = 0.00310974 Jy ! Total flux subtracted in 200 components = 0.00310974 Jy ! Clean residual min=-0.002981 max=0.003026 Jy/beam ! Clean residual mean=-0.000006 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.141119 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 174 components and 0.141119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107987Jy sigma=0.000850 ! Fit after self-cal, rms=0.108138Jy sigma=0.000849 ! Inverting map ! Added new window around map position (14.5, -68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157693 Jy ! Component: 100 - total flux cleaned = 0.001941 Jy ! Component: 150 - total flux cleaned = 0.00248146 Jy ! Component: 200 - total flux cleaned = 0.00274833 Jy ! Total flux subtracted in 200 components = 0.00274833 Jy ! Clean residual min=-0.003043 max=0.002217 Jy/beam ! Clean residual mean=0.000003 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.143868 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 191 components and 0.143868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107974Jy sigma=0.000848 ! Fit after self-cal, rms=0.108121Jy sigma=0.000848 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108121Jy sigma=0.000848 ! Fit after self-cal, rms=0.110271Jy sigma=0.000846 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.845 mas, bmaj=21.6 mas, bpa=-0.2169 degrees ! Estimated noise=1038.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240259 Jy ! Component: 100 - total flux cleaned = 0.0036138 Jy ! Component: 150 - total flux cleaned = 0.00426422 Jy ! Component: 200 - total flux cleaned = 0.00454631 Jy ! Total flux subtracted in 200 components = 0.00454631 Jy ! Clean residual min=-0.002341 max=0.001793 Jy/beam ! Clean residual mean=-0.000016 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.148414 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 210 components and 0.148414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110231Jy sigma=0.000846 ! Fit after self-cal, rms=0.110420Jy sigma=0.000846 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522182 Jy ! Component: 100 - total flux cleaned = 0.000668282 Jy ! Component: 150 - total flux cleaned = 0.000702861 Jy ! Component: 200 - total flux cleaned = 0.000734889 Jy ! Total flux subtracted in 200 components = 0.000734889 Jy ! Clean residual min=-0.002296 max=0.001751 Jy/beam ! Clean residual mean=-0.000011 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.149149 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 219 components and 0.149149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110394Jy sigma=0.000846 ! Fit after self-cal, rms=0.110430Jy sigma=0.000846 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.789 mas, bpa=-3.104 degrees ! Estimated noise=801.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.773 x 6.789 at -3.104 degrees (North through East) ! Clean map min=-0.0069975 max=0.06432 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.271 mas, bmaj=5.669 mas, bpa=-2.235 degrees ! Estimated noise=1540.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491955 Jy ! Component: 100 - total flux cleaned = 0.0726111 Jy ! Component: 150 - total flux cleaned = 0.0879191 Jy ! Component: 200 - total flux cleaned = 0.0986875 Jy ! Total flux subtracted in 200 components = 0.0986875 Jy ! Clean residual min=-0.009088 max=0.009875 Jy/beam ! Clean residual mean=-0.000058 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 0.0986875 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0986875 Jy ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.789 mas, bpa=-3.104 degrees ! Estimated noise=801.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015347 Jy ! Component: 100 - total flux cleaned = 0.0245061 Jy ! Component: 150 - total flux cleaned = 0.029516 Jy ! Component: 200 - total flux cleaned = 0.0329294 Jy ! Total flux subtracted in 200 components = 0.0329294 Jy ! Clean residual min=-0.004863 max=0.005062 Jy/beam ! Clean residual mean=-0.000037 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.131617 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 77 components and 0.131617 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.845 mas, bmaj=21.6 mas, bpa=-0.2169 degrees ! Estimated noise=1038.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643433 Jy ! Component: 100 - total flux cleaned = 0.00964179 Jy ! Component: 150 - total flux cleaned = 0.012058 Jy ! Component: 200 - total flux cleaned = 0.0138604 Jy ! Total flux subtracted in 200 components = 0.0138604 Jy ! Clean residual min=-0.003308 max=0.002435 Jy/beam ! Clean residual mean=-0.000027 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.145477 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000919671 Jy ! Component: 100 - total flux cleaned = 0.00135105 Jy ! Component: 150 - total flux cleaned = 0.00168984 Jy ! Component: 200 - total flux cleaned = 0.00204126 Jy ! Total flux subtracted in 200 components = 0.00204126 Jy ! Clean residual min=-0.002827 max=0.002086 Jy/beam ! Clean residual mean=-0.000021 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.147518 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 120 components and 0.147518 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.789 mas, bpa=-3.104 degrees ! Estimated noise=801.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112044 Jy ! Component: 100 - total flux cleaned = 0.000637257 Jy ! Component: 150 - total flux cleaned = 0.00117494 Jy ! Component: 200 - total flux cleaned = 0.00126712 Jy ! Total flux subtracted in 200 components = 0.00126712 Jy ! Clean residual min=-0.002866 max=0.003047 Jy/beam ! Clean residual mean=-0.000007 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.148786 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 0.148786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110421Jy sigma=0.000846 ! Fit after self-cal, rms=0.110444Jy sigma=0.000846 wmodel J0729-3439_S_2014_01_04_pus_map.mod ! Writing 137 model components to file: J0729-3439_S_2014_01_04_pus_map.mod wobs J0729-3439_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0729-3439_S_2014_01_04_pus_uvs.fits wwins J0729-3439_S_2014_01_04_pus_map.win ! wwins: Wrote 7 windows to J0729-3439_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000426264 Jy ! Component: 100 - total flux cleaned = -0.000426405 Jy ! Component: 150 - total flux cleaned = -0.000384102 Jy ! Component: 200 - total flux cleaned = -0.000621619 Jy ! Component: 250 - total flux cleaned = -0.00092075 Jy ! Component: 300 - total flux cleaned = -0.00127387 Jy ! Component: 350 - total flux cleaned = -0.00147669 Jy ! Component: 400 - total flux cleaned = -0.00170485 Jy ! Component: 450 - total flux cleaned = -0.00195653 Jy ! Component: 500 - total flux cleaned = -0.00220112 Jy ! Component: 550 - total flux cleaned = -0.002409 Jy ! Component: 600 - total flux cleaned = -0.00263944 Jy ! Component: 650 - total flux cleaned = -0.00283478 Jy ! Component: 700 - total flux cleaned = -0.00299819 Jy ! Component: 750 - total flux cleaned = -0.00313157 Jy ! Component: 800 - total flux cleaned = -0.00326108 Jy ! Component: 850 - total flux cleaned = -0.00343783 Jy ! Component: 900 - total flux cleaned = -0.00360968 Jy ! Component: 950 - total flux cleaned = -0.00375388 Jy ! Component: 1000 - total flux cleaned = -0.00387214 Jy ! Component: 1050 - total flux cleaned = -0.00394123 Jy ! Component: 1100 - total flux cleaned = -0.00394084 Jy ! Component: 1150 - total flux cleaned = -0.00398518 Jy ! Component: 1200 - total flux cleaned = -0.00396349 Jy ! Component: 1250 - total flux cleaned = -0.00407052 Jy ! Component: 1300 - total flux cleaned = -0.00411273 Jy ! Component: 1350 - total flux cleaned = -0.00413301 Jy ! Component: 1400 - total flux cleaned = -0.00411274 Jy ! Component: 1450 - total flux cleaned = -0.00413283 Jy ! Component: 1500 - total flux cleaned = -0.00413305 Jy ! Component: 1550 - total flux cleaned = -0.00415278 Jy ! Component: 1600 - total flux cleaned = -0.0041336 Jy ! Component: 1650 - total flux cleaned = -0.00409601 Jy ! Component: 1700 - total flux cleaned = -0.00413322 Jy ! Component: 1750 - total flux cleaned = -0.00415131 Jy ! Component: 1800 - total flux cleaned = -0.00407839 Jy ! Component: 1850 - total flux cleaned = -0.004132 Jy ! Component: 1900 - total flux cleaned = -0.00411397 Jy ! Component: 1950 - total flux cleaned = -0.00413128 Jy ! Component: 2000 - total flux cleaned = -0.0040967 Jy ! Component: 2050 - total flux cleaned = -0.00413113 Jy ! Component: 2100 - total flux cleaned = -0.00414812 Jy ! Component: 2150 - total flux cleaned = -0.0041484 Jy ! Component: 2200 - total flux cleaned = -0.00419793 Jy ! Component: 2250 - total flux cleaned = -0.00423057 Jy ! Component: 2300 - total flux cleaned = -0.00419813 Jy ! Component: 2350 - total flux cleaned = -0.00421441 Jy ! Component: 2400 - total flux cleaned = -0.00426198 Jy ! Component: 2450 - total flux cleaned = -0.00429321 Jy ! Component: 2500 - total flux cleaned = -0.00433953 Jy ! Component: 2550 - total flux cleaned = -0.00433959 Jy ! Component: 2600 - total flux cleaned = -0.00436975 Jy ! Component: 2650 - total flux cleaned = -0.00439963 Jy ! Component: 2700 - total flux cleaned = -0.00442926 Jy ! Component: 2750 - total flux cleaned = -0.00440002 Jy ! Component: 2800 - total flux cleaned = -0.00447291 Jy ! Component: 2850 - total flux cleaned = -0.00457379 Jy ! Component: 2900 - total flux cleaned = -0.0046023 Jy ! Component: 2950 - total flux cleaned = -0.00464481 Jy ! Component: 3000 - total flux cleaned = -0.00468704 Jy ! Component: 3050 - total flux cleaned = -0.00477055 Jy ! Component: 3100 - total flux cleaned = -0.0048118 Jy ! Component: 3150 - total flux cleaned = -0.00490745 Jy ! Component: 3200 - total flux cleaned = -0.0049346 Jy ! Component: 3250 - total flux cleaned = -0.00502866 Jy ! Component: 3300 - total flux cleaned = -0.00512191 Jy ! Component: 3350 - total flux cleaned = -0.00517483 Jy ! Component: 3400 - total flux cleaned = -0.00522728 Jy ! Component: 3450 - total flux cleaned = -0.00530537 Jy ! Component: 3500 - total flux cleaned = -0.00535694 Jy ! Component: 3550 - total flux cleaned = -0.00542083 Jy ! Component: 3600 - total flux cleaned = -0.00547172 Jy ! Component: 3650 - total flux cleaned = -0.0055348 Jy ! Component: 3700 - total flux cleaned = -0.00560993 Jy ! Component: 3750 - total flux cleaned = -0.005697 Jy ! Component: 3800 - total flux cleaned = -0.00573402 Jy ! Component: 3850 - total flux cleaned = -0.00579547 Jy ! Component: 3900 - total flux cleaned = -0.00588091 Jy ! Component: 3950 - total flux cleaned = -0.00595357 Jy ! Component: 4000 - total flux cleaned = -0.00601379 Jy ! Component: 4050 - total flux cleaned = -0.00610967 Jy ! Total flux subtracted in 4096 components = -0.00622875 Jy ! Clean residual min=-0.000704 max=0.000658 Jy/beam ! Clean residual mean=-0.000008 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.142557 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 383 components and 0.142557 Jy ![Exited script file: muppet] wmap "J0729-3439_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.773 x 6.789 at -3.104 degrees (North through East) ! Clean map min=-0.0046164 max=0.056608 Jy/beam ! Writing clean map to FITS file: J0729-3439_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0566079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204725 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08496 1.08496 2.16993 4.33985 8.67971 17.3594 34.7188 69.4377 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.773 x 6.789 at -3.104 degrees (North through East) ! Clean map min=-0.0046164 max=0.056608 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0729-3439_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:12 2017