! Started logfile: J0726+7911_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:57 2017 obs J0726+7911_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0726+7911_S_2014_01_04_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0726+7911 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 1680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0726+7911_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.468237Jy sigma=0.006000 ! Fit after self-cal, rms=0.444862Jy sigma=0.005685 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=13.11 mas, bpa=59.73 degrees ! Estimated noise=2626.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.431442 Jy ! Component: 100 - total flux cleaned = 0.528723 Jy ! Total flux subtracted in 100 components = 0.528723 Jy ! Clean residual min=-0.026492 max=0.035137 Jy/beam ! Clean residual mean=0.000009 rms=0.008065 Jy/beam ! Combined flux in latest and established models = 0.528723 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.528723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128732Jy sigma=0.001392 ! Fit after self-cal, rms=0.128776Jy sigma=0.001392 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=13.63 mas, bpa=59.2 degrees ! Estimated noise=1442.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516551 Jy ! Component: 100 - total flux cleaned = 0.0787424 Jy ! Component: 150 - total flux cleaned = 0.0970851 Jy ! Component: 200 - total flux cleaned = 0.110319 Jy ! Total flux subtracted in 200 components = 0.110319 Jy ! Clean residual min=-0.015859 max=0.014000 Jy/beam ! Clean residual mean=-0.000002 rms=0.004349 Jy/beam ! Combined flux in latest and established models = 0.639043 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.639043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101223Jy sigma=0.001124 ! Fit after self-cal, rms=0.101098Jy sigma=0.001123 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.02 ! MK 0.98 NL 0.96 OV 0.98 PT 1.02 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.00 ! MK 0.99 NL 1.01 OV 1.02 PT 0.96 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.82 ! MK 1.02 NL 0.99 OV 0.94 PT 0.94 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.89 ! MK 0.99 NL 1.05 OV 1.00 PT 0.99 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.101098Jy sigma=0.001123 ! Fit after self-cal, rms=0.084989Jy sigma=0.000912 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=13.61 mas, bpa=59.31 degrees ! Estimated noise=1434.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00330447 Jy ! Component: 100 - total flux cleaned = -0.00389368 Jy ! Component: 150 - total flux cleaned = -0.00415064 Jy ! Component: 200 - total flux cleaned = -0.00450583 Jy ! Total flux subtracted in 200 components = -0.00450583 Jy ! Clean residual min=-0.005826 max=0.005239 Jy/beam ! Clean residual mean=-0.000006 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.634537 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.634537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084308Jy sigma=0.000906 ! Fit after self-cal, rms=0.084152Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084152Jy sigma=0.000906 ! Fit after self-cal, rms=0.084001Jy sigma=0.000906 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=13.61 mas, bpa=59.3 degrees ! Estimated noise=1434.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234986 Jy ! Component: 100 - total flux cleaned = -0.00309222 Jy ! Component: 150 - total flux cleaned = -0.00356145 Jy ! Component: 200 - total flux cleaned = -0.00389738 Jy ! Total flux subtracted in 200 components = -0.00389738 Jy ! Clean residual min=-0.004759 max=0.004531 Jy/beam ! Clean residual mean=-0.000005 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.630639 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.630639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083664Jy sigma=0.000903 ! Fit after self-cal, rms=0.083666Jy sigma=0.000903 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297228 Jy ! Component: 100 - total flux cleaned = -0.000515965 Jy ! Component: 150 - total flux cleaned = -0.000647524 Jy ! Component: 200 - total flux cleaned = -0.000770728 Jy ! Total flux subtracted in 200 components = -0.000770728 Jy ! Clean residual min=-0.004342 max=0.004386 Jy/beam ! Clean residual mean=-0.000004 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.629869 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.629869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083506Jy sigma=0.000902 ! Fit after self-cal, rms=0.083510Jy sigma=0.000902 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083510Jy sigma=0.000902 ! Fit after self-cal, rms=0.083370Jy sigma=0.000902 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=13.6 mas, bpa=59.29 degrees ! Estimated noise=1433.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177559 Jy ! Component: 100 - total flux cleaned = -0.00255474 Jy ! Component: 150 - total flux cleaned = -0.00316113 Jy ! Component: 200 - total flux cleaned = -0.0034621 Jy ! Total flux subtracted in 200 components = -0.0034621 Jy ! Clean residual min=-0.003966 max=0.004050 Jy/beam ! Clean residual mean=-0.000003 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.626407 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.626407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083243Jy sigma=0.000901 ! Fit after self-cal, rms=0.083242Jy sigma=0.000901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279964 Jy ! Component: 100 - total flux cleaned = -0.000453776 Jy ! Component: 150 - total flux cleaned = -0.000695083 Jy ! Component: 200 - total flux cleaned = -0.0008441 Jy ! Total flux subtracted in 200 components = -0.0008441 Jy ! Clean residual min=-0.003893 max=0.003950 Jy/beam ! Clean residual mean=-0.000003 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.625562 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.625563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083183Jy sigma=0.000900 ! Fit after self-cal, rms=0.083188Jy sigma=0.000900 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083188Jy sigma=0.000900 ! Fit after self-cal, rms=0.083092Jy sigma=0.000900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.224 mas, bmaj=15.03 mas, bpa=59.14 degrees ! Estimated noise=1652.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121482 Jy ! Component: 100 - total flux cleaned = -0.00198007 Jy ! Component: 150 - total flux cleaned = -0.00237777 Jy ! Component: 200 - total flux cleaned = -0.00259532 Jy ! Total flux subtracted in 200 components = -0.00259532 Jy ! Clean residual min=-0.002673 max=0.003071 Jy/beam ! Clean residual mean=-0.000005 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.622967 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.622967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083096Jy sigma=0.000900 ! Fit after self-cal, rms=0.083077Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000438495 Jy ! Component: 100 - total flux cleaned = -0.000586219 Jy ! Component: 150 - total flux cleaned = -0.000675086 Jy ! Component: 200 - total flux cleaned = -0.000723026 Jy ! Total flux subtracted in 200 components = -0.000723026 Jy ! Clean residual min=-0.002431 max=0.002986 Jy/beam ! Clean residual mean=-0.000005 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.622244 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 114 components and 0.622244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083077Jy sigma=0.000900 ! Fit after self-cal, rms=0.083076Jy sigma=0.000900 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=13.6 mas, bpa=59.29 degrees ! Estimated noise=1433.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.982 x 13.6 at 59.29 degrees (North through East) ! Clean map min=-0.0038591 max=0.56429 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083076Jy sigma=0.000900 ! Fit after self-cal, rms=0.076525Jy sigma=0.000765 ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=13.59 mas, bpa=59.28 degrees ! Estimated noise=1433.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000912521 Jy ! Component: 100 - total flux cleaned = -0.0011632 Jy ! Component: 150 - total flux cleaned = -0.00134524 Jy ! Component: 200 - total flux cleaned = -0.00144252 Jy ! Total flux subtracted in 200 components = -0.00144252 Jy ! Clean residual min=-0.003306 max=0.003678 Jy/beam ! Clean residual mean=-0.000002 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.620802 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 119 components and 0.620802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076468Jy sigma=0.000765 ! Fit after self-cal, rms=0.076479Jy sigma=0.000765 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101635 Jy ! Component: 100 - total flux cleaned = -0.000131973 Jy ! Component: 150 - total flux cleaned = -0.000134273 Jy ! Component: 200 - total flux cleaned = -0.000109867 Jy ! Total flux subtracted in 200 components = -0.000109867 Jy ! Clean residual min=-0.003296 max=0.003657 Jy/beam ! Clean residual mean=-0.000002 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.620692 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 125 components and 0.620692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076451Jy sigma=0.000765 ! Fit after self-cal, rms=0.076457Jy sigma=0.000765 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076457Jy sigma=0.000765 ! Fit after self-cal, rms=0.076397Jy sigma=0.000765 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.397 mas, bmaj=13.03 mas, bpa=59.87 degrees ! Estimated noise=2614.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.429535 Jy ! Component: 100 - total flux cleaned = 0.5271 Jy ! Component: 150 - total flux cleaned = 0.567226 Jy ! Component: 200 - total flux cleaned = 0.588094 Jy ! Total flux subtracted in 200 components = 0.588094 Jy ! Clean residual min=-0.010569 max=0.011078 Jy/beam ! Clean residual mean=0.000003 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.588094 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.588094 Jy ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=13.59 mas, bpa=59.28 degrees ! Estimated noise=1433.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, 39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132832 Jy ! Component: 100 - total flux cleaned = 0.0189754 Jy ! Component: 150 - total flux cleaned = 0.0214358 Jy ! Component: 200 - total flux cleaned = 0.0233963 Jy ! Total flux subtracted in 200 components = 0.0233963 Jy ! Clean residual min=-0.004451 max=0.004740 Jy/beam ! Clean residual mean=-0.000001 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.61149 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 55 components and 0.61149 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.229 mas, bmaj=15.03 mas, bpa=59.17 degrees ! Estimated noise=1651.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332572 Jy ! Component: 100 - total flux cleaned = 0.00466634 Jy ! Component: 150 - total flux cleaned = 0.00538918 Jy ! Component: 200 - total flux cleaned = 0.00571911 Jy ! Total flux subtracted in 200 components = 0.00571911 Jy ! Clean residual min=-0.002515 max=0.002379 Jy/beam ! Clean residual mean=-0.000003 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.617209 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364979 Jy ! Component: 100 - total flux cleaned = 0.000767342 Jy ! Component: 150 - total flux cleaned = 0.00108917 Jy ! Component: 200 - total flux cleaned = 0.00137776 Jy ! Total flux subtracted in 200 components = 0.00137776 Jy ! Clean residual min=-0.002374 max=0.002192 Jy/beam ! Clean residual mean=-0.000003 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.618587 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 91 components and 0.618587 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=13.59 mas, bpa=59.28 degrees ! Estimated noise=1433.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459231 Jy ! Component: 100 - total flux cleaned = -0.000793333 Jy ! Component: 150 - total flux cleaned = -0.000889692 Jy ! Component: 200 - total flux cleaned = -0.000891237 Jy ! Total flux subtracted in 200 components = -0.000891237 Jy ! Clean residual min=-0.003024 max=0.003179 Jy/beam ! Clean residual mean=-0.000001 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.617696 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.617696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076575Jy sigma=0.000765 ! Fit after self-cal, rms=0.076570Jy sigma=0.000765 wmodel J0726+7911_S_2014_01_04_pus_map.mod ! Writing 111 model components to file: J0726+7911_S_2014_01_04_pus_map.mod wobs J0726+7911_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0726+7911_S_2014_01_04_pus_uvs.fits wwins J0726+7911_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0726+7911_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516258 Jy ! Component: 100 - total flux cleaned = 0.000777589 Jy ! Component: 150 - total flux cleaned = 0.000925537 Jy ! Component: 200 - total flux cleaned = 0.000880595 Jy ! Component: 250 - total flux cleaned = 0.000837007 Jy ! Component: 300 - total flux cleaned = 0.000622355 Jy ! Component: 350 - total flux cleaned = 0.00041589 Jy ! Component: 400 - total flux cleaned = 0.000215872 Jy ! Component: 450 - total flux cleaned = 5.95915e-05 Jy ! Component: 500 - total flux cleaned = -0.000168413 Jy ! Component: 550 - total flux cleaned = -0.000389397 Jy ! Component: 600 - total flux cleaned = -0.000605329 Jy ! Component: 650 - total flux cleaned = -0.000816091 Jy ! Component: 700 - total flux cleaned = -0.000987766 Jy ! Component: 750 - total flux cleaned = -0.00112299 Jy ! Component: 800 - total flux cleaned = -0.00138778 Jy ! Component: 850 - total flux cleaned = -0.00158216 Jy ! Component: 900 - total flux cleaned = -0.0017733 Jy ! Component: 950 - total flux cleaned = -0.00186749 Jy ! Component: 1000 - total flux cleaned = -0.00196006 Jy ! Component: 1050 - total flux cleaned = -0.00214125 Jy ! Component: 1100 - total flux cleaned = -0.00228969 Jy ! Component: 1150 - total flux cleaned = -0.00246506 Jy ! Component: 1200 - total flux cleaned = -0.00255148 Jy ! Component: 1250 - total flux cleaned = -0.00272222 Jy ! Component: 1300 - total flux cleaned = -0.00275008 Jy ! Component: 1350 - total flux cleaned = -0.00272225 Jy ! Component: 1400 - total flux cleaned = -0.00266764 Jy ! Component: 1450 - total flux cleaned = -0.0026138 Jy ! Component: 1500 - total flux cleaned = -0.0026934 Jy ! Component: 1550 - total flux cleaned = -0.0025885 Jy ! Component: 1600 - total flux cleaned = -0.00253717 Jy ! Component: 1650 - total flux cleaned = -0.00258847 Jy ! Component: 1700 - total flux cleaned = -0.00263901 Jy ! Component: 1750 - total flux cleaned = -0.00258915 Jy ! Component: 1800 - total flux cleaned = -0.00258922 Jy ! Component: 1850 - total flux cleaned = -0.0025643 Jy ! Component: 1900 - total flux cleaned = -0.00256431 Jy ! Component: 1950 - total flux cleaned = -0.00254072 Jy ! Component: 2000 - total flux cleaned = -0.0026118 Jy ! Component: 2050 - total flux cleaned = -0.0025885 Jy ! Component: 2100 - total flux cleaned = -0.00268101 Jy ! Component: 2150 - total flux cleaned = -0.00265791 Jy ! Component: 2200 - total flux cleaned = -0.00265787 Jy ! Component: 2250 - total flux cleaned = -0.00261309 Jy ! Component: 2300 - total flux cleaned = -0.00270237 Jy ! Component: 2350 - total flux cleaned = -0.00268007 Jy ! Component: 2400 - total flux cleaned = -0.00270219 Jy ! Component: 2450 - total flux cleaned = -0.00272391 Jy ! Component: 2500 - total flux cleaned = -0.00272401 Jy ! Component: 2550 - total flux cleaned = -0.00274548 Jy ! Component: 2600 - total flux cleaned = -0.00283119 Jy ! Component: 2650 - total flux cleaned = -0.00280981 Jy ! Component: 2700 - total flux cleaned = -0.00287342 Jy ! Component: 2750 - total flux cleaned = -0.00287346 Jy ! Component: 2800 - total flux cleaned = -0.00293643 Jy ! Component: 2850 - total flux cleaned = -0.00287355 Jy ! Component: 2900 - total flux cleaned = -0.0029153 Jy ! Component: 2950 - total flux cleaned = -0.00291526 Jy ! Component: 3000 - total flux cleaned = -0.00291523 Jy ! Component: 3050 - total flux cleaned = -0.00289478 Jy ! Component: 3100 - total flux cleaned = -0.00297693 Jy ! Component: 3150 - total flux cleaned = -0.00301795 Jy ! Component: 3200 - total flux cleaned = -0.00312026 Jy ! Component: 3250 - total flux cleaned = -0.00309972 Jy ! Component: 3300 - total flux cleaned = -0.0030792 Jy ! Component: 3350 - total flux cleaned = -0.00307924 Jy ! Component: 3400 - total flux cleaned = -0.00307921 Jy ! Component: 3450 - total flux cleaned = -0.00312028 Jy ! Component: 3500 - total flux cleaned = -0.00307917 Jy ! Component: 3550 - total flux cleaned = -0.00309986 Jy ! Component: 3600 - total flux cleaned = -0.00314117 Jy ! Component: 3650 - total flux cleaned = -0.00316193 Jy ! Component: 3700 - total flux cleaned = -0.00314119 Jy ! Component: 3750 - total flux cleaned = -0.00316183 Jy ! Component: 3800 - total flux cleaned = -0.00324532 Jy ! Component: 3850 - total flux cleaned = -0.00330815 Jy ! Component: 3900 - total flux cleaned = -0.00332919 Jy ! Component: 3950 - total flux cleaned = -0.00335027 Jy ! Component: 4000 - total flux cleaned = -0.00332902 Jy ! Component: 4050 - total flux cleaned = -0.00337164 Jy ! Total flux subtracted in 4096 components = -0.00341445 Jy ! Clean residual min=-0.001375 max=0.001320 Jy/beam ! Clean residual mean=-0.000008 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.614281 Jy keep ! Adding 208 model components to the UV plane model. ! The established model now contains 319 components and 0.614281 Jy ![Exited script file: muppet] wmap "J0726+7911_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.982 x 13.59 at 59.28 degrees (North through East) ! Clean map min=-0.0042659 max=0.56108 Jy/beam ! Writing clean map to FITS file: J0726+7911_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.561077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353669 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.189102 0.189102 0.378204 0.756407 1.51281 3.02563 6.05126 12.1025 24.205 48.4101 96.8201 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.561 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.982 x 13.59 at 59.28 degrees (North through East) ! Clean map min=-0.0042659 max=0.56108 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0726+7911_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:20:01 2017