! Started logfile: J0714+7408_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:43 2017 obs J0714+7408_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0714+7408_S_2014_01_04_pus_uva.fits ! AN table 1: 37 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0714+7408 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 2220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0714+7408_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.876852Jy sigma=0.012160 ! Fit after self-cal, rms=0.861133Jy sigma=0.011919 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=17.96 mas, bpa=61.75 degrees ! Estimated noise=1850.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105838 Jy ! Component: 100 - total flux cleaned = 0.128927 Jy ! Total flux subtracted in 100 components = 0.128927 Jy ! Clean residual min=-0.006526 max=0.007597 Jy/beam ! Clean residual mean=-0.000004 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.128927 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.128927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074438Jy sigma=0.000921 ! Fit after self-cal, rms=0.074424Jy sigma=0.000921 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=17.3 mas, bpa=61.49 degrees ! Estimated noise=1141.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941862 Jy ! Component: 100 - total flux cleaned = 0.014293 Jy ! Component: 150 - total flux cleaned = 0.017573 Jy ! Component: 200 - total flux cleaned = 0.0196819 Jy ! Total flux subtracted in 200 components = 0.0196819 Jy ! Clean residual min=-0.005447 max=0.005115 Jy/beam ! Clean residual mean=-0.000002 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.148609 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 33 components and 0.148609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072781Jy sigma=0.000907 ! Fit after self-cal, rms=0.072661Jy sigma=0.000907 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 1.00 ! MK 0.98 NL 0.93 OV 0.96 PT 1.07 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 1.03 ! MK 0.96 NL 1.01 OV 1.01 PT 1.02 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* KP 1.00* LA 0.81 ! MK 1.00 NL 0.98 OV 0.89 PT 0.99 ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 0.89 ! MK 1.05 NL 1.12 OV 1.02 PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.072661Jy sigma=0.000907 ! Fit after self-cal, rms=0.068924Jy sigma=0.000887 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=17.35 mas, bpa=61.56 degrees ! Estimated noise=1127.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171467 Jy ! Component: 100 - total flux cleaned = 0.00279414 Jy ! Component: 150 - total flux cleaned = 0.00357855 Jy ! Component: 200 - total flux cleaned = 0.0040388 Jy ! Total flux subtracted in 200 components = 0.0040388 Jy ! Clean residual min=-0.003031 max=0.002292 Jy/beam ! Clean residual mean=-0.000000 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.152647 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 57 components and 0.152647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068861Jy sigma=0.000886 ! Fit after self-cal, rms=0.068748Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068748Jy sigma=0.000886 ! Fit after self-cal, rms=0.068779Jy sigma=0.000886 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=17.34 mas, bpa=61.55 degrees ! Estimated noise=1127.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804508 Jy ! Component: 100 - total flux cleaned = 0.00140237 Jy ! Component: 150 - total flux cleaned = 0.00175052 Jy ! Component: 200 - total flux cleaned = 0.0020289 Jy ! Total flux subtracted in 200 components = 0.0020289 Jy ! Clean residual min=-0.002845 max=0.002348 Jy/beam ! Clean residual mean=-0.000000 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.154676 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 0.154676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068759Jy sigma=0.000886 ! Fit after self-cal, rms=0.068759Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487855 Jy ! Component: 100 - total flux cleaned = 0.000758558 Jy ! Component: 150 - total flux cleaned = 0.000992241 Jy ! Component: 200 - total flux cleaned = 0.0012473 Jy ! Total flux subtracted in 200 components = 0.0012473 Jy ! Clean residual min=-0.002735 max=0.002425 Jy/beam ! Clean residual mean=-0.000000 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.155924 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 84 components and 0.155924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068749Jy sigma=0.000886 ! Fit after self-cal, rms=0.068749Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068749Jy sigma=0.000886 ! Fit after self-cal, rms=0.068890Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=17.34 mas, bpa=61.54 degrees ! Estimated noise=1129.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567749 Jy ! Component: 100 - total flux cleaned = 0.00100495 Jy ! Component: 150 - total flux cleaned = 0.00133108 Jy ! Component: 200 - total flux cleaned = 0.00153523 Jy ! Total flux subtracted in 200 components = 0.00153523 Jy ! Clean residual min=-0.002623 max=0.002451 Jy/beam ! Clean residual mean=-0.000001 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.157459 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.157459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068881Jy sigma=0.000886 ! Fit after self-cal, rms=0.068878Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213869 Jy ! Component: 100 - total flux cleaned = 0.000337857 Jy ! Component: 150 - total flux cleaned = 0.000444909 Jy ! Component: 200 - total flux cleaned = 0.000497293 Jy ! Total flux subtracted in 200 components = 0.000497293 Jy ! Clean residual min=-0.002581 max=0.002476 Jy/beam ! Clean residual mean=-0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.157956 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.157956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068872Jy sigma=0.000886 ! Fit after self-cal, rms=0.068871Jy sigma=0.000886 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068871Jy sigma=0.000886 ! Fit after self-cal, rms=0.069010Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=16.37 mas, bpa=57.24 degrees ! Estimated noise=1299.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000586258 Jy ! Component: 100 - total flux cleaned = 0.00101632 Jy ! Component: 150 - total flux cleaned = 0.00116405 Jy ! Component: 200 - total flux cleaned = 0.0012716 Jy ! Total flux subtracted in 200 components = 0.0012716 Jy ! Clean residual min=-0.002406 max=0.002101 Jy/beam ! Clean residual mean=-0.000001 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.159228 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.159228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069004Jy sigma=0.000885 ! Fit after self-cal, rms=0.069007Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.61546e-05 Jy ! Component: 100 - total flux cleaned = 0.00011883 Jy ! Component: 150 - total flux cleaned = 0.000175671 Jy ! Component: 200 - total flux cleaned = 0.000243377 Jy ! Total flux subtracted in 200 components = 0.000243377 Jy ! Clean residual min=-0.002350 max=0.002109 Jy/beam ! Clean residual mean=-0.000001 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.159471 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 108 components and 0.159471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069005Jy sigma=0.000885 ! Fit after self-cal, rms=0.069001Jy sigma=0.000885 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=17.34 mas, bpa=61.54 degrees ! Estimated noise=1130.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.476 x 17.34 at 61.54 degrees (North through East) ! Clean map min=-0.0023933 max=0.13838 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=17.95 mas, bpa=61.85 degrees ! Estimated noise=1844.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10549 Jy ! Component: 100 - total flux cleaned = 0.128493 Jy ! Component: 150 - total flux cleaned = 0.135049 Jy ! Component: 200 - total flux cleaned = 0.138874 Jy ! Total flux subtracted in 200 components = 0.138874 Jy ! Clean residual min=-0.004434 max=0.004158 Jy/beam ! Clean residual mean=-0.000000 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.138874 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.138874 Jy ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=17.34 mas, bpa=61.54 degrees ! Estimated noise=1130.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419418 Jy ! Component: 100 - total flux cleaned = 0.00683296 Jy ! Component: 150 - total flux cleaned = 0.00889698 Jy ! Component: 200 - total flux cleaned = 0.0105597 Jy ! Total flux subtracted in 200 components = 0.0105597 Jy ! Clean residual min=-0.003495 max=0.002586 Jy/beam ! Clean residual mean=0.000000 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.149433 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 0.149433 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=16.37 mas, bpa=57.24 degrees ! Estimated noise=1299.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188306 Jy ! Component: 100 - total flux cleaned = 0.00336205 Jy ! Component: 150 - total flux cleaned = 0.00461218 Jy ! Component: 200 - total flux cleaned = 0.00567811 Jy ! Total flux subtracted in 200 components = 0.00567811 Jy ! Clean residual min=-0.003125 max=0.002186 Jy/beam ! Clean residual mean=-0.000000 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.155111 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000913169 Jy ! Component: 100 - total flux cleaned = 0.0015173 Jy ! Component: 150 - total flux cleaned = 0.00205041 Jy ! Component: 200 - total flux cleaned = 0.00249937 Jy ! Total flux subtracted in 200 components = 0.00249937 Jy ! Clean residual min=-0.002747 max=0.002142 Jy/beam ! Clean residual mean=-0.000001 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.157611 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 81 components and 0.157611 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=17.34 mas, bpa=61.54 degrees ! Estimated noise=1130.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727905 Jy ! Component: 100 - total flux cleaned = 0.00116192 Jy ! Component: 150 - total flux cleaned = 0.00135816 Jy ! Component: 200 - total flux cleaned = 0.00149334 Jy ! Total flux subtracted in 200 components = 0.00149334 Jy ! Clean residual min=-0.002579 max=0.002519 Jy/beam ! Clean residual mean=-0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.159104 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.159104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069013Jy sigma=0.000886 ! Fit after self-cal, rms=0.069010Jy sigma=0.000886 wmodel J0714+7408_S_2014_01_04_pus_map.mod ! Writing 93 model components to file: J0714+7408_S_2014_01_04_pus_map.mod wobs J0714+7408_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0714+7408_S_2014_01_04_pus_uvs.fits wwins J0714+7408_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0714+7408_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000498575 Jy ! Component: 100 - total flux cleaned = -0.000909048 Jy ! Component: 150 - total flux cleaned = -0.00102257 Jy ! Component: 200 - total flux cleaned = -0.00109217 Jy ! Component: 250 - total flux cleaned = -0.00115904 Jy ! Component: 300 - total flux cleaned = -0.00116025 Jy ! Component: 350 - total flux cleaned = -0.00106947 Jy ! Component: 400 - total flux cleaned = -0.000923677 Jy ! Component: 450 - total flux cleaned = -0.000838838 Jy ! Component: 500 - total flux cleaned = -0.000811481 Jy ! Component: 550 - total flux cleaned = -0.000811537 Jy ! Component: 600 - total flux cleaned = -0.000863092 Jy ! Component: 650 - total flux cleaned = -0.000913192 Jy ! Component: 700 - total flux cleaned = -0.000938232 Jy ! Component: 750 - total flux cleaned = -0.000987035 Jy ! Component: 800 - total flux cleaned = -0.000938632 Jy ! Component: 850 - total flux cleaned = -0.000938626 Jy ! Component: 900 - total flux cleaned = -0.000891595 Jy ! Component: 950 - total flux cleaned = -0.000914717 Jy ! Component: 1000 - total flux cleaned = -0.00084561 Jy ! Component: 1050 - total flux cleaned = -0.00086855 Jy ! Component: 1100 - total flux cleaned = -0.000891372 Jy ! Component: 1150 - total flux cleaned = -0.000936425 Jy ! Component: 1200 - total flux cleaned = -0.000936342 Jy ! Component: 1250 - total flux cleaned = -0.000980834 Jy ! Component: 1300 - total flux cleaned = -0.000980961 Jy ! Component: 1350 - total flux cleaned = -0.00100306 Jy ! Component: 1400 - total flux cleaned = -0.00109071 Jy ! Component: 1450 - total flux cleaned = -0.00113446 Jy ! Component: 1500 - total flux cleaned = -0.00122179 Jy ! Component: 1550 - total flux cleaned = -0.00133062 Jy ! Component: 1600 - total flux cleaned = -0.00146127 Jy ! Component: 1650 - total flux cleaned = -0.00152644 Jy ! Component: 1700 - total flux cleaned = -0.00161349 Jy ! Component: 1750 - total flux cleaned = -0.00170049 Jy ! Component: 1800 - total flux cleaned = -0.00176607 Jy ! Component: 1850 - total flux cleaned = -0.00180985 Jy ! Component: 1900 - total flux cleaned = -0.00185399 Jy ! Component: 1950 - total flux cleaned = -0.0019206 Jy ! Component: 2000 - total flux cleaned = -0.00200987 Jy ! Component: 2050 - total flux cleaned = -0.00212241 Jy ! Component: 2100 - total flux cleaned = -0.00216781 Jy ! Component: 2150 - total flux cleaned = -0.00219053 Jy ! Component: 2200 - total flux cleaned = -0.0022141 Jy ! Component: 2250 - total flux cleaned = -0.00226098 Jy ! Component: 2300 - total flux cleaned = -0.00226089 Jy ! Component: 2350 - total flux cleaned = -0.00230856 Jy ! Component: 2400 - total flux cleaned = -0.00233292 Jy ! Component: 2450 - total flux cleaned = -0.00240643 Jy ! Component: 2500 - total flux cleaned = -0.00248106 Jy ! Component: 2550 - total flux cleaned = -0.00248102 Jy ! Component: 2600 - total flux cleaned = -0.00253193 Jy ! Component: 2650 - total flux cleaned = -0.00258337 Jy ! Component: 2700 - total flux cleaned = -0.00263584 Jy ! Component: 2750 - total flux cleaned = -0.00266263 Jy ! Component: 2800 - total flux cleaned = -0.00268973 Jy ! Component: 2850 - total flux cleaned = -0.0027451 Jy ! Component: 2900 - total flux cleaned = -0.00277349 Jy ! Component: 2950 - total flux cleaned = -0.00283041 Jy ! Component: 3000 - total flux cleaned = -0.00291699 Jy ! Component: 3050 - total flux cleaned = -0.00300474 Jy ! Component: 3100 - total flux cleaned = -0.00309433 Jy ! Component: 3150 - total flux cleaned = -0.00321617 Jy ! Component: 3200 - total flux cleaned = -0.00327787 Jy ! Component: 3250 - total flux cleaned = -0.00343506 Jy ! Component: 3300 - total flux cleaned = -0.00346698 Jy ! Component: 3350 - total flux cleaned = -0.00359768 Jy ! Component: 3400 - total flux cleaned = -0.0036975 Jy ! Component: 3450 - total flux cleaned = -0.0037986 Jy ! Component: 3500 - total flux cleaned = -0.00390216 Jy ! Component: 3550 - total flux cleaned = -0.00397218 Jy ! Component: 3600 - total flux cleaned = -0.00400786 Jy ! Component: 3650 - total flux cleaned = -0.00404387 Jy ! Component: 3700 - total flux cleaned = -0.0041921 Jy ! Component: 3750 - total flux cleaned = -0.00423052 Jy ! Component: 3800 - total flux cleaned = -0.00430702 Jy ! Component: 3850 - total flux cleaned = -0.00446385 Jy ! Component: 3900 - total flux cleaned = -0.004504 Jy ! Component: 3950 - total flux cleaned = -0.00454465 Jy ! Component: 4000 - total flux cleaned = -0.00462679 Jy ! Component: 4050 - total flux cleaned = -0.00475345 Jy ! Total flux subtracted in 4096 components = -0.00475309 Jy ! Clean residual min=-0.002482 max=0.002350 Jy/beam ! Clean residual mean=-0.000003 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.154351 Jy keep ! Adding 191 model components to the UV plane model. ! The established model now contains 284 components and 0.154351 Jy ![Exited script file: muppet] wmap "J0714+7408_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.476 x 17.34 at 61.54 degrees (North through East) ! Clean map min=-0.0053696 max=0.13726 Jy/beam ! Writing clean map to FITS file: J0714+7408_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137264 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000850617 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.85908 1.85908 3.71817 7.43634 14.8727 29.7453 59.4907 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.476 x 17.34 at 61.54 degrees (North through East) ! Clean map min=-0.0053696 max=0.13726 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0714+7408_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:48 2017