! Started logfile: J0711+0048_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:50:39 2016 obs J0711+0048_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0711+0048_S_2015_03_17_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97888 visibilities/baseline/integration-bin. ! Found source: J0711+0048 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 21320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0711+0048_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954454Jy sigma=0.010128 ! Fit after self-cal, rms=0.921368Jy sigma=0.009815 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=6.729 mas, bpa=-5.068 degrees ! Estimated noise=653.391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510727 Jy ! Component: 100 - total flux cleaned = 0.0777115 Jy ! Total flux subtracted in 100 components = 0.0777115 Jy ! Clean residual min=-0.009824 max=0.018863 Jy/beam ! Clean residual mean=-0.000065 rms=0.003163 Jy/beam ! Combined flux in latest and established models = 0.0777115 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.0777115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126194Jy sigma=0.001108 ! Fit after self-cal, rms=0.125608Jy sigma=0.001103 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7.44 mas, bpa=-4.837 degrees ! Estimated noise=471.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382317 Jy ! Component: 100 - total flux cleaned = 0.0652554 Jy ! Component: 150 - total flux cleaned = 0.0855956 Jy ! Component: 200 - total flux cleaned = 0.101359 Jy ! Total flux subtracted in 200 components = 0.101359 Jy ! Clean residual min=-0.009800 max=0.017502 Jy/beam ! Clean residual mean=-0.000128 rms=0.003364 Jy/beam ! Combined flux in latest and established models = 0.179071 Jy ! Performing phase self-cal ! Adding 109 model components to the UV plane model. ! The established model now contains 141 components and 0.179071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105930Jy sigma=0.000921 ! Fit after self-cal, rms=0.104709Jy sigma=0.000909 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.67 HN 1.20 KP 0.96 ! LA 0.81 MK 0.95 NL 1.13 OV 0.98 ! PT 0.87 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.70 HN 1.16 KP 0.98 ! LA 0.82 MK 0.92 NL 1.21 OV 1.03 ! PT 0.86 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.72 HN 1.12 KP 0.91 ! LA 0.74 MK 1.05 NL 1.46 OV 0.97 ! PT 0.85 SC 1.24 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.73 HN 1.00 KP 0.87 ! LA 0.82 MK 0.96 NL 1.26 OV 1.06 ! PT 0.86 SC 1.04 ! ! ! Fit before self-cal, rms=0.104709Jy sigma=0.000909 ! Fit after self-cal, rms=0.090207Jy sigma=0.000856 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=7.958 mas, bpa=-6.128 degrees ! Estimated noise=456.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, 19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120113 Jy ! Component: 100 - total flux cleaned = 0.0195395 Jy ! Component: 150 - total flux cleaned = 0.0249507 Jy ! Component: 200 - total flux cleaned = 0.0291173 Jy ! Total flux subtracted in 200 components = 0.0291173 Jy ! Clean residual min=-0.006590 max=0.007582 Jy/beam ! Clean residual mean=-0.000053 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.208188 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 219 components and 0.208188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088614Jy sigma=0.000829 ! Fit after self-cal, rms=0.088456Jy sigma=0.000825 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088456Jy sigma=0.000825 ! Fit after self-cal, rms=0.085575Jy sigma=0.000816 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=7.966 mas, bpa=-6.516 degrees ! Estimated noise=444.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489547 Jy ! Component: 100 - total flux cleaned = 0.00774197 Jy ! Component: 150 - total flux cleaned = 0.0093255 Jy ! Component: 200 - total flux cleaned = 0.0102972 Jy ! Total flux subtracted in 200 components = 0.0102972 Jy ! Clean residual min=-0.004220 max=0.006504 Jy/beam ! Clean residual mean=-0.000023 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.218485 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 243 components and 0.218485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085242Jy sigma=0.000811 ! Fit after self-cal, rms=0.085235Jy sigma=0.000810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (114.5, 101). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612389 Jy ! Component: 100 - total flux cleaned = 0.00932176 Jy ! Component: 150 - total flux cleaned = 0.0108514 Jy ! Component: 200 - total flux cleaned = 0.0120671 Jy ! Total flux subtracted in 200 components = 0.0120671 Jy ! Clean residual min=-0.003783 max=0.005507 Jy/beam ! Clean residual mean=-0.000019 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.230552 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 300 components and 0.230552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084721Jy sigma=0.000804 ! Fit after self-cal, rms=0.084623Jy sigma=0.000803 ! Inverting map ! Added new window around map position (-6.5, 56). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546483 Jy ! Component: 100 - total flux cleaned = 0.00852413 Jy ! Component: 150 - total flux cleaned = 0.00995846 Jy ! Component: 200 - total flux cleaned = 0.0107487 Jy ! Total flux subtracted in 200 components = 0.0107487 Jy ! Clean residual min=-0.003243 max=0.004372 Jy/beam ! Clean residual mean=-0.000021 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.241301 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 345 components and 0.241301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084147Jy sigma=0.000798 ! Fit after self-cal, rms=0.084104Jy sigma=0.000797 ! Inverting map ! Added new window around map position (11.5, -45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366621 Jy ! Component: 100 - total flux cleaned = 0.00488431 Jy ! Component: 150 - total flux cleaned = 0.00614246 Jy ! Component: 200 - total flux cleaned = 0.00717213 Jy ! Total flux subtracted in 200 components = 0.00717213 Jy ! Clean residual min=-0.002993 max=0.003507 Jy/beam ! Clean residual mean=-0.000020 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.248473 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 394 components and 0.248473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083797Jy sigma=0.000794 ! Fit after self-cal, rms=0.083783Jy sigma=0.000793 ! Inverting map ! Added new window around map position (11.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293528 Jy ! Component: 100 - total flux cleaned = 0.00332797 Jy ! Component: 150 - total flux cleaned = 0.00375238 Jy ! Component: 200 - total flux cleaned = 0.00413731 Jy ! Total flux subtracted in 200 components = 0.00413731 Jy ! Clean residual min=-0.003000 max=0.002614 Jy/beam ! Clean residual mean=-0.000018 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.252611 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 426 components and 0.252611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083586Jy sigma=0.000792 ! Fit after self-cal, rms=0.083560Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083560Jy sigma=0.000792 ! Fit after self-cal, rms=0.082525Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.9 mas, bpa=-6.481 degrees ! Estimated noise=438.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237518 Jy ! Component: 100 - total flux cleaned = 0.00282233 Jy ! Component: 150 - total flux cleaned = 0.00310536 Jy ! Component: 200 - total flux cleaned = 0.00342032 Jy ! Total flux subtracted in 200 components = 0.00342032 Jy ! Clean residual min=-0.002954 max=0.002314 Jy/beam ! Clean residual mean=-0.000010 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.256031 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 459 components and 0.256031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082405Jy sigma=0.000789 ! Fit after self-cal, rms=0.082378Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112498 Jy ! Component: 100 - total flux cleaned = 0.00143655 Jy ! Component: 150 - total flux cleaned = 0.00172116 Jy ! Component: 200 - total flux cleaned = 0.00194185 Jy ! Total flux subtracted in 200 components = 0.00194185 Jy ! Clean residual min=-0.002806 max=0.002374 Jy/beam ! Clean residual mean=-0.000010 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.257973 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 475 components and 0.257973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082307Jy sigma=0.000789 ! Fit after self-cal, rms=0.082303Jy sigma=0.000788 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082303Jy sigma=0.000788 ! Fit after self-cal, rms=0.080954Jy sigma=0.000788 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.804 mas, bmaj=12.24 mas, bpa=-2.256 degrees ! Estimated noise=553.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174324 Jy ! Component: 100 - total flux cleaned = 0.00269436 Jy ! Component: 150 - total flux cleaned = 0.00340908 Jy ! Component: 200 - total flux cleaned = 0.00389462 Jy ! Total flux subtracted in 200 components = 0.00389462 Jy ! Clean residual min=-0.003867 max=0.003332 Jy/beam ! Clean residual mean=-0.000018 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.261867 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 508 components and 0.261867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080888Jy sigma=0.000788 ! Fit after self-cal, rms=0.080865Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823989 Jy ! Component: 100 - total flux cleaned = 0.00125868 Jy ! Component: 150 - total flux cleaned = 0.00156604 Jy ! Component: 200 - total flux cleaned = 0.00177056 Jy ! Total flux subtracted in 200 components = 0.00177056 Jy ! Clean residual min=-0.003677 max=0.003328 Jy/beam ! Clean residual mean=-0.000016 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.263638 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 529 components and 0.263638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080832Jy sigma=0.000787 ! Fit after self-cal, rms=0.080830Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=7.829 mas, bpa=-6.269 degrees ! Estimated noise=433.645 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 7.829 at -6.269 degrees (North through East) ! Clean map min=-0.0034512 max=0.058524 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=7.023 mas, bpa=-6.393 degrees ! Estimated noise=610.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0470041 Jy ! Component: 100 - total flux cleaned = 0.074825 Jy ! Component: 150 - total flux cleaned = 0.0955614 Jy ! Component: 200 - total flux cleaned = 0.111815 Jy ! Total flux subtracted in 200 components = 0.111815 Jy ! Clean residual min=-0.007047 max=0.011011 Jy/beam ! Clean residual mean=-0.000040 rms=0.002182 Jy/beam ! Combined flux in latest and established models = 0.111815 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.111815 Jy ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=7.829 mas, bpa=-6.269 degrees ! Estimated noise=433.645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221024 Jy ! Component: 100 - total flux cleaned = 0.0379773 Jy ! Component: 150 - total flux cleaned = 0.0507192 Jy ! Component: 200 - total flux cleaned = 0.0614575 Jy ! Total flux subtracted in 200 components = 0.0614575 Jy ! Clean residual min=-0.006084 max=0.008624 Jy/beam ! Clean residual mean=-0.000060 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 0.173272 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 153 components and 0.173272 Jy ! Inverting map ! Added new window around map position (-5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00963985 Jy ! Component: 100 - total flux cleaned = 0.0176132 Jy ! Component: 150 - total flux cleaned = 0.0245335 Jy ! Component: 200 - total flux cleaned = 0.0306338 Jy ! Total flux subtracted in 200 components = 0.0306338 Jy ! Clean residual min=-0.004496 max=0.004680 Jy/beam ! Clean residual mean=-0.000039 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.203906 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 231 components and 0.203906 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.804 mas, bmaj=12.24 mas, bpa=-2.256 degrees ! Estimated noise=553.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100023 Jy ! Component: 100 - total flux cleaned = 0.0179042 Jy ! Component: 150 - total flux cleaned = 0.0243966 Jy ! Component: 200 - total flux cleaned = 0.0298264 Jy ! Total flux subtracted in 200 components = 0.0298264 Jy ! Clean residual min=-0.004977 max=0.005530 Jy/beam ! Clean residual mean=-0.000048 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.233732 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459024 Jy ! Component: 100 - total flux cleaned = 0.00850266 Jy ! Component: 150 - total flux cleaned = 0.0118684 Jy ! Component: 200 - total flux cleaned = 0.0147846 Jy ! Total flux subtracted in 200 components = 0.0147846 Jy ! Clean residual min=-0.003876 max=0.004267 Jy/beam ! Clean residual mean=-0.000032 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.248517 Jy ! Adding 197 model components to the UV plane model. ! The established model now contains 409 components and 0.248517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=7.829 mas, bpa=-6.269 degrees ! Estimated noise=433.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196042 Jy ! Component: 100 - total flux cleaned = 0.0035074 Jy ! Component: 150 - total flux cleaned = 0.00486588 Jy ! Component: 200 - total flux cleaned = 0.00595602 Jy ! Total flux subtracted in 200 components = 0.00595602 Jy ! Clean residual min=-0.002309 max=0.002577 Jy/beam ! Clean residual mean=-0.000011 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.254473 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 444 components and 0.254473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080931Jy sigma=0.000789 ! Fit after self-cal, rms=0.080824Jy sigma=0.000787 wmodel J0711+0048_S_2015_03_17_pus_map.mod ! Writing 444 model components to file: J0711+0048_S_2015_03_17_pus_map.mod wobs J0711+0048_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0711+0048_S_2015_03_17_pus_uvs.fits wwins J0711+0048_S_2015_03_17_pus_map.win ! wwins: Wrote 8 windows to J0711+0048_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291235 Jy ! Component: 100 - total flux cleaned = -0.000706016 Jy ! Component: 150 - total flux cleaned = -0.000990308 Jy ! Component: 200 - total flux cleaned = -0.00119189 Jy ! Component: 250 - total flux cleaned = -0.00132164 Jy ! Component: 300 - total flux cleaned = -0.00132201 Jy ! Component: 350 - total flux cleaned = -0.00135232 Jy ! Component: 400 - total flux cleaned = -0.00140934 Jy ! Component: 450 - total flux cleaned = -0.0014652 Jy ! Component: 500 - total flux cleaned = -0.00157398 Jy ! Component: 550 - total flux cleaned = -0.00154732 Jy ! Component: 600 - total flux cleaned = -0.00157308 Jy ! Component: 650 - total flux cleaned = -0.00147248 Jy ! Component: 700 - total flux cleaned = -0.00142297 Jy ! Component: 750 - total flux cleaned = -0.00137399 Jy ! Component: 800 - total flux cleaned = -0.00130367 Jy ! Component: 850 - total flux cleaned = -0.00139476 Jy ! Component: 900 - total flux cleaned = -0.00130404 Jy ! Component: 950 - total flux cleaned = -0.00121594 Jy ! Component: 1000 - total flux cleaned = -0.00121634 Jy ! Component: 1050 - total flux cleaned = -0.00121675 Jy ! Component: 1100 - total flux cleaned = -0.00125864 Jy ! Component: 1150 - total flux cleaned = -0.00134022 Jy ! Component: 1200 - total flux cleaned = -0.00125917 Jy ! Component: 1250 - total flux cleaned = -0.00129945 Jy ! Component: 1300 - total flux cleaned = -0.00135838 Jy ! Component: 1350 - total flux cleaned = -0.00139715 Jy ! Component: 1400 - total flux cleaned = -0.00141597 Jy ! Component: 1450 - total flux cleaned = -0.00141555 Jy ! Component: 1500 - total flux cleaned = -0.00147064 Jy ! Component: 1550 - total flux cleaned = -0.00143425 Jy ! Component: 1600 - total flux cleaned = -0.00146983 Jy ! Component: 1650 - total flux cleaned = -0.0014696 Jy ! Component: 1700 - total flux cleaned = -0.00143458 Jy ! Component: 1750 - total flux cleaned = -0.00140014 Jy ! Component: 1800 - total flux cleaned = -0.00143386 Jy ! Component: 1850 - total flux cleaned = -0.00140014 Jy ! Component: 1900 - total flux cleaned = -0.00135069 Jy ! Component: 1950 - total flux cleaned = -0.00126986 Jy ! Component: 2000 - total flux cleaned = -0.00128637 Jy ! Component: 2050 - total flux cleaned = -0.00131837 Jy ! Component: 2100 - total flux cleaned = -0.00124005 Jy ! Component: 2150 - total flux cleaned = -0.00127102 Jy ! Component: 2200 - total flux cleaned = -0.00125574 Jy ! Component: 2250 - total flux cleaned = -0.00130073 Jy ! Component: 2300 - total flux cleaned = -0.00128566 Jy ! Component: 2350 - total flux cleaned = -0.00127098 Jy ! Component: 2400 - total flux cleaned = -0.00134395 Jy ! Component: 2450 - total flux cleaned = -0.00131517 Jy ! Component: 2500 - total flux cleaned = -0.00134369 Jy ! Component: 2550 - total flux cleaned = -0.00130155 Jy ! Component: 2600 - total flux cleaned = -0.00135734 Jy ! Component: 2650 - total flux cleaned = -0.00135722 Jy ! Component: 2700 - total flux cleaned = -0.00137099 Jy ! Component: 2750 - total flux cleaned = -0.00135738 Jy ! Component: 2800 - total flux cleaned = -0.00137073 Jy ! Component: 2850 - total flux cleaned = -0.00135746 Jy ! Component: 2900 - total flux cleaned = -0.00137044 Jy ! Component: 2950 - total flux cleaned = -0.0013833 Jy ! Component: 3000 - total flux cleaned = -0.00139625 Jy ! Component: 3050 - total flux cleaned = -0.00142179 Jy ! Component: 3100 - total flux cleaned = -0.00145976 Jy ! Component: 3150 - total flux cleaned = -0.00145967 Jy ! Component: 3200 - total flux cleaned = -0.00150953 Jy ! Component: 3250 - total flux cleaned = -0.00153419 Jy ! Component: 3300 - total flux cleaned = -0.00150978 Jy ! Component: 3350 - total flux cleaned = -0.00155859 Jy ! Component: 3400 - total flux cleaned = -0.00155858 Jy ! Component: 3450 - total flux cleaned = -0.00163036 Jy ! Component: 3500 - total flux cleaned = -0.00159477 Jy ! Component: 3550 - total flux cleaned = -0.00163018 Jy ! Component: 3600 - total flux cleaned = -0.00166528 Jy ! Component: 3650 - total flux cleaned = -0.00165356 Jy ! Component: 3700 - total flux cleaned = -0.00164218 Jy ! Component: 3750 - total flux cleaned = -0.00166498 Jy ! Component: 3800 - total flux cleaned = -0.00168763 Jy ! Component: 3850 - total flux cleaned = -0.00171002 Jy ! Component: 3900 - total flux cleaned = -0.00173221 Jy ! Component: 3950 - total flux cleaned = -0.00174313 Jy ! Component: 4000 - total flux cleaned = -0.00172119 Jy ! Component: 4050 - total flux cleaned = -0.00172123 Jy ! Total flux subtracted in 4096 components = -0.00173205 Jy ! Clean residual min=-0.000707 max=0.000646 Jy/beam ! Clean residual mean=-0.000003 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.252741 Jy keep ! Adding 391 model components to the UV plane model. ! The established model now contains 834 components and 0.25274 Jy ![Exited script file: muppet] wmap "J0711+0048_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 7.829 at -6.269 degrees (North through East) ! Clean map min=-0.0015332 max=0.058275 Jy/beam ! Writing clean map to FITS file: J0711+0048_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0582753 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211846 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09058 1.09058 2.18116 4.36231 8.72463 17.4493 34.8985 69.797 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 7.829 at -6.269 degrees (North through East) ! Clean map min=-0.0015332 max=0.058275 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0711+0048_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:50:47 2016