! Started logfile: J0658-3642_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:57:39 2016 obs J0658-3642_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0658-3642_S_2014_08_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.650273 visibilities/baseline/integration-bin. ! Found source: J0658-3642 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 14280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0658-3642_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971728Jy sigma=0.006893 ! Fit after self-cal, rms=0.926539Jy sigma=0.006604 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=14.62 mas, bpa=5.658 degrees ! Estimated noise=1363.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0590454 Jy ! Component: 100 - total flux cleaned = 0.0720149 Jy ! Total flux subtracted in 100 components = 0.0720149 Jy ! Clean residual min=-0.004787 max=0.007607 Jy/beam ! Clean residual mean=-0.000010 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.0720149 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0720149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119067Jy sigma=0.000759 ! Fit after self-cal, rms=0.118786Jy sigma=0.000757 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=16.97 mas, bpa=4.845 degrees ! Estimated noise=852.458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789153 Jy ! Component: 100 - total flux cleaned = 0.0114367 Jy ! Component: 150 - total flux cleaned = 0.0134063 Jy ! Component: 200 - total flux cleaned = 0.0138858 Jy ! Total flux subtracted in 200 components = 0.0138858 Jy ! Clean residual min=-0.003760 max=0.004260 Jy/beam ! Clean residual mean=0.000007 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.0859006 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0859006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118241Jy sigma=0.000754 ! Fit after self-cal, rms=0.118299Jy sigma=0.000754 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.77 FD 0.82 HN 1.03 KP 1.01 ! LA 1.05 MK 1.00* NL 1.02 OV 0.98 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.00 FD 0.97 HN 1.16 KP 1.02 ! LA 0.99 MK 1.00* NL 1.06 OV 1.02 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.77 FD 1.06 HN 1.08 KP 0.90 ! LA 0.86 MK 1.00* NL 1.06 OV 0.93 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.73 FD 1.01 HN 1.07 KP 0.85 ! LA 0.78 MK 1.00* NL 1.07 OV 0.99 ! PT 0.97 SC 0.96 ! ! ! Fit before self-cal, rms=0.118299Jy sigma=0.000754 ! Fit after self-cal, rms=0.120071Jy sigma=0.000747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=17.15 mas, bpa=4.989 degrees ! Estimated noise=852.088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191907 Jy ! Component: 100 - total flux cleaned = -0.00022696 Jy ! Component: 150 - total flux cleaned = -0.000195679 Jy ! Component: 200 - total flux cleaned = -0.000196515 Jy ! Total flux subtracted in 200 components = -0.000196515 Jy ! Clean residual min=-0.002231 max=0.002260 Jy/beam ! Clean residual mean=0.000005 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0857041 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.0857041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120053Jy sigma=0.000746 ! Fit after self-cal, rms=0.120351Jy sigma=0.000745 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120351Jy sigma=0.000745 ! Fit after self-cal, rms=0.122242Jy sigma=0.000745 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.843 mas, bmaj=17.16 mas, bpa=4.978 degrees ! Estimated noise=852.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328212 Jy ! Component: 100 - total flux cleaned = 0.000280197 Jy ! Component: 150 - total flux cleaned = 0.000280439 Jy ! Component: 200 - total flux cleaned = 0.000280835 Jy ! Total flux subtracted in 200 components = 0.000280835 Jy ! Clean residual min=-0.002056 max=0.002180 Jy/beam ! Clean residual mean=0.000003 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0859849 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.0859849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122232Jy sigma=0.000745 ! Fit after self-cal, rms=0.122312Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93458e-05 Jy ! Component: 100 - total flux cleaned = -4.44159e-05 Jy ! Component: 150 - total flux cleaned = -4.49576e-05 Jy ! Component: 200 - total flux cleaned = -6.21462e-05 Jy ! Total flux subtracted in 200 components = -6.21462e-05 Jy ! Clean residual min=-0.002014 max=0.002235 Jy/beam ! Clean residual mean=0.000004 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0859228 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.0859228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122304Jy sigma=0.000745 ! Fit after self-cal, rms=0.122281Jy sigma=0.000745 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122281Jy sigma=0.000745 ! Fit after self-cal, rms=0.122660Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=17.11 mas, bpa=4.912 degrees ! Estimated noise=849.098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210717 Jy ! Component: 100 - total flux cleaned = 0.000171935 Jy ! Component: 150 - total flux cleaned = 0.0001559 Jy ! Component: 200 - total flux cleaned = 0.000155639 Jy ! Total flux subtracted in 200 components = 0.000155639 Jy ! Clean residual min=-0.002303 max=0.001949 Jy/beam ! Clean residual mean=0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0860784 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.0860784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122654Jy sigma=0.000744 ! Fit after self-cal, rms=0.122692Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.00873e-05 Jy ! Component: 100 - total flux cleaned = -9.67517e-05 Jy ! Component: 150 - total flux cleaned = -0.000125452 Jy ! Component: 200 - total flux cleaned = -0.000138489 Jy ! Total flux subtracted in 200 components = -0.000138489 Jy ! Clean residual min=-0.002267 max=0.001990 Jy/beam ! Clean residual mean=0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0859399 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.0859399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122687Jy sigma=0.000744 ! Fit after self-cal, rms=0.122686Jy sigma=0.000744 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122686Jy sigma=0.000744 ! Fit after self-cal, rms=0.122616Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=26.11 mas, bpa=-4.077 degrees ! Estimated noise=977.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.31999e-05 Jy ! Component: 100 - total flux cleaned = -7.84494e-06 Jy ! Component: 150 - total flux cleaned = -8.45233e-06 Jy ! Component: 200 - total flux cleaned = -8.42019e-06 Jy ! Total flux subtracted in 200 components = -8.42019e-06 Jy ! Clean residual min=-0.002326 max=0.001915 Jy/beam ! Clean residual mean=0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0859315 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 76 components and 0.0859315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122614Jy sigma=0.000744 ! Fit after self-cal, rms=0.122621Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.12209e-05 Jy ! Component: 100 - total flux cleaned = -4.10306e-05 Jy ! Component: 150 - total flux cleaned = -4.09403e-05 Jy ! Component: 200 - total flux cleaned = -4.14895e-05 Jy ! Total flux subtracted in 200 components = -4.14895e-05 Jy ! Clean residual min=-0.002324 max=0.001943 Jy/beam ! Clean residual mean=0.000001 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.08589 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.08589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122620Jy sigma=0.000744 ! Fit after self-cal, rms=0.122620Jy sigma=0.000744 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=17.09 mas, bpa=4.913 degrees ! Estimated noise=847.977 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 17.09 at 4.913 degrees (North through East) ! Clean map min=-0.0022699 max=0.078887 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=14.53 mas, bpa=5.724 degrees ! Estimated noise=1408.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602324 Jy ! Component: 100 - total flux cleaned = 0.07365 Jy ! Component: 150 - total flux cleaned = 0.078963 Jy ! Component: 200 - total flux cleaned = 0.082358 Jy ! Total flux subtracted in 200 components = 0.082358 Jy ! Clean residual min=-0.003790 max=0.003706 Jy/beam ! Clean residual mean=-0.000001 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.082358 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.082358 Jy ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=17.09 mas, bpa=4.913 degrees ! Estimated noise=847.977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275945 Jy ! Component: 100 - total flux cleaned = 0.00310828 Jy ! Component: 150 - total flux cleaned = 0.00331819 Jy ! Component: 200 - total flux cleaned = 0.00335279 Jy ! Total flux subtracted in 200 components = 0.00335279 Jy ! Clean residual min=-0.002346 max=0.002121 Jy/beam ! Clean residual mean=0.000001 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0857108 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.0857108 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=26.11 mas, bpa=-4.077 degrees ! Estimated noise=977.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.80904e-05 Jy ! Component: 100 - total flux cleaned = 3.08999e-05 Jy ! Component: 150 - total flux cleaned = 7.15482e-05 Jy ! Component: 200 - total flux cleaned = 7.14904e-05 Jy ! Total flux subtracted in 200 components = 7.14904e-05 Jy ! Clean residual min=-0.002308 max=0.002001 Jy/beam ! Clean residual mean=0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0857823 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.18029e-07 Jy ! Component: 100 - total flux cleaned = 1.90035e-06 Jy ! Component: 150 - total flux cleaned = 3.2096e-06 Jy ! Component: 200 - total flux cleaned = 1.55768e-05 Jy ! Total flux subtracted in 200 components = 1.55768e-05 Jy ! Clean residual min=-0.002320 max=0.002004 Jy/beam ! Clean residual mean=0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0857979 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.0857979 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=17.09 mas, bpa=4.913 degrees ! Estimated noise=847.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170306 Jy ! Component: 100 - total flux cleaned = -6.03057e-05 Jy ! Component: 150 - total flux cleaned = 1.20754e-06 Jy ! Component: 200 - total flux cleaned = 7.21031e-07 Jy ! Total flux subtracted in 200 components = 7.21031e-07 Jy ! Clean residual min=-0.002345 max=0.002020 Jy/beam ! Clean residual mean=0.000001 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0857986 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0857986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122629Jy sigma=0.000744 ! Fit after self-cal, rms=0.122605Jy sigma=0.000744 wmodel J0658-3642_S_2014_08_09_pus_map.mod ! Writing 53 model components to file: J0658-3642_S_2014_08_09_pus_map.mod wobs J0658-3642_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0658-3642_S_2014_08_09_pus_uvs.fits wwins J0658-3642_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J0658-3642_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587 Jy ! Component: 100 - total flux cleaned = -0.000833722 Jy ! Component: 150 - total flux cleaned = -0.00086736 Jy ! Component: 200 - total flux cleaned = -0.000834861 Jy ! Component: 250 - total flux cleaned = -0.000864896 Jy ! Component: 300 - total flux cleaned = -0.000894014 Jy ! Component: 350 - total flux cleaned = -0.000780042 Jy ! Component: 400 - total flux cleaned = -0.000669327 Jy ! Component: 450 - total flux cleaned = -0.000587721 Jy ! Component: 500 - total flux cleaned = -0.000455257 Jy ! Component: 550 - total flux cleaned = -0.000377295 Jy ! Component: 600 - total flux cleaned = -0.000224968 Jy ! Component: 650 - total flux cleaned = -7.60133e-05 Jy ! Component: 700 - total flux cleaned = 2.12639e-05 Jy ! Component: 750 - total flux cleaned = 9.37163e-05 Jy ! Component: 800 - total flux cleaned = 0.000282144 Jy ! Component: 850 - total flux cleaned = 0.000351793 Jy ! Component: 900 - total flux cleaned = 0.00039742 Jy ! Component: 950 - total flux cleaned = 0.000419749 Jy ! Component: 1000 - total flux cleaned = 0.000486202 Jy ! Component: 1050 - total flux cleaned = 0.000551344 Jy ! Component: 1100 - total flux cleaned = 0.000594223 Jy ! Component: 1150 - total flux cleaned = 0.000678729 Jy ! Component: 1200 - total flux cleaned = 0.00078248 Jy ! Component: 1250 - total flux cleaned = 0.000803008 Jy ! Component: 1300 - total flux cleaned = 0.000945069 Jy ! Component: 1350 - total flux cleaned = 0.00108477 Jy ! Component: 1400 - total flux cleaned = 0.00114399 Jy ! Component: 1450 - total flux cleaned = 0.00129995 Jy ! Component: 1500 - total flux cleaned = 0.00137682 Jy ! Component: 1550 - total flux cleaned = 0.00145268 Jy ! Component: 1600 - total flux cleaned = 0.00150893 Jy ! Component: 1650 - total flux cleaned = 0.00163867 Jy ! Component: 1700 - total flux cleaned = 0.00171174 Jy ! Component: 1750 - total flux cleaned = 0.00178407 Jy ! Component: 1800 - total flux cleaned = 0.00189135 Jy ! Component: 1850 - total flux cleaned = 0.00192675 Jy ! Component: 1900 - total flux cleaned = 0.00199713 Jy ! Component: 1950 - total flux cleaned = 0.00211879 Jy ! Component: 2000 - total flux cleaned = 0.00222209 Jy ! Component: 2050 - total flux cleaned = 0.00232413 Jy ! Component: 2100 - total flux cleaned = 0.00237449 Jy ! Component: 2150 - total flux cleaned = 0.00242481 Jy ! Component: 2200 - total flux cleaned = 0.00255687 Jy ! Component: 2250 - total flux cleaned = 0.00257311 Jy ! Component: 2300 - total flux cleaned = 0.00260569 Jy ! Component: 2350 - total flux cleaned = 0.0027183 Jy ! Component: 2400 - total flux cleaned = 0.00278188 Jy ! Component: 2450 - total flux cleaned = 0.00287656 Jy ! Component: 2500 - total flux cleaned = 0.00289196 Jy ! Component: 2550 - total flux cleaned = 0.00295417 Jy ! Component: 2600 - total flux cleaned = 0.0030619 Jy ! Component: 2650 - total flux cleaned = 0.00313824 Jy ! Component: 2700 - total flux cleaned = 0.00325922 Jy ! Component: 2750 - total flux cleaned = 0.00333419 Jy ! Component: 2800 - total flux cleaned = 0.00336402 Jy ! Component: 2850 - total flux cleaned = 0.00346754 Jy ! Component: 2900 - total flux cleaned = 0.0035116 Jy ! Component: 2950 - total flux cleaned = 0.00351178 Jy ! Component: 3000 - total flux cleaned = 0.00367083 Jy ! Component: 3050 - total flux cleaned = 0.0037282 Jy ! Component: 3100 - total flux cleaned = 0.00372818 Jy ! Component: 3150 - total flux cleaned = 0.00384158 Jy ! Component: 3200 - total flux cleaned = 0.00391197 Jy ! Component: 3250 - total flux cleaned = 0.00400964 Jy ! Component: 3300 - total flux cleaned = 0.00406497 Jy ! Component: 3350 - total flux cleaned = 0.0041201 Jy ! Component: 3400 - total flux cleaned = 0.00420232 Jy ! Component: 3450 - total flux cleaned = 0.00424313 Jy ! Component: 3500 - total flux cleaned = 0.00428366 Jy ! Component: 3550 - total flux cleaned = 0.00439105 Jy ! Component: 3600 - total flux cleaned = 0.00447094 Jy ! Component: 3650 - total flux cleaned = 0.00447103 Jy ! Component: 3700 - total flux cleaned = 0.00451056 Jy ! Component: 3750 - total flux cleaned = 0.00457612 Jy ! Component: 3800 - total flux cleaned = 0.00465412 Jy ! Component: 3850 - total flux cleaned = 0.004667 Jy ! Component: 3900 - total flux cleaned = 0.00469276 Jy ! Component: 3950 - total flux cleaned = 0.00476948 Jy ! Component: 4000 - total flux cleaned = 0.0048584 Jy ! Component: 4050 - total flux cleaned = 0.00487089 Jy ! Total flux subtracted in 4096 components = 0.0048709 Jy ! Clean residual min=-0.000884 max=0.000723 Jy/beam ! Clean residual mean=-0.000000 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0906695 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 360 components and 0.0906695 Jy ![Exited script file: muppet] wmap "J0658-3642_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 17.09 at 4.913 degrees (North through East) ! Clean map min=-0.0019513 max=0.07933 Jy/beam ! Writing clean map to FITS file: J0658-3642_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0793295 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000258287 device "J0658-3642_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0658-3642_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.976761 0.976761 1.95352 3.90704 7.81409 15.6282 31.2564 62.5127 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 17.09 at 4.913 degrees (North through East) ! Clean map min=-0.0019513 max=0.07933 Jy/beam quit ! Quitting program ! Log file J0658-3642_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:57:44 2016